The thermodynamic difference between a Rankine cycle working with saturated steam and the Carnot cycle is that  (a) carnot cycle can’t work with saturated steam  (b) heat is supplied to water at temperature below the maximum temperature of the cycle  (c) a rankine cycle receives heat at two places  (d) rankine cycle is hypothetical  (e) none of the above.

The thermodynamic difference between a Rankine cycle working with saturated steam and the Carnot cycle is that  (a) carnot cycle can’t work with saturated steam  (b) heat is supplied to water at temperature below the maximum temperature of the cycle  (c) a rankine cycle receives heat at two places  (d) rankine cycle is hypothetical  (e) none of the above.
by

1 Answer

Answer :

Answer : b
by

Related questions

Reversed joule cycle is called  (a) Carnot cycle  (b) Rankine cycle  (c) Brayton cycle  (d) Bell Coleman cycle  (e) Dual cycle.

Description : Reversed joule cycle is called  (a) Carnot cycle  (b) Rankine cycle  (c) Brayton cycle  (d) Bell Coleman cycle  (e) Dual cycle.

Last Answer : Answer : c

Thermal power plant works on  (a) Carnot cycle  (b) Joule cycle  (d) Rankine cycle  (d) Otto cycle  (e) Brayton cycle.

Description : Thermal power plant works on  (a) Carnot cycle  (b) Joule cycle  (d) Rankine cycle  (d) Otto cycle  (e) Brayton cycle.

Last Answer : Answer : c

Which of the following is used in thermal power plant?  a. Brayton cycle  b. Reversed carnot cycle  c. Rankine cycle  d. Otto cycle

Description : Which of the following is used in thermal power plant?  a. Brayton cycle  b. Reversed carnot cycle  c. Rankine cycle  d. Otto cycle

Last Answer : Rankine cycle

In thermodynamics, a throttling process, also called a _________, is a type of isenthalpic process where a liquid or gas is cooled as it passes from a higher pressure state to a lower pressure state.  a. Rankine Process  b. Carnot Cycle  c. Joule-Thomson process  d. Refrigeration process

Description : In thermodynamics, a throttling process, also called a _________, is a type of isenthalpic process where a liquid or gas is cooled as it passes from a higher pressure state to a lower pressure state.  a. Rankine Process  b. Carnot Cycle  c. Joule-Thomson process  d. Refrigeration process

Last Answer : Joule-Thomson process

Which of the following cycles has maximum efficiency  (a) Rankine  (b) Stirling  (c) Carnot  (d) Brayton  (e) Joule.

Description : Which of the following cycles has maximum efficiency  (a) Rankine  (b) Stirling  (c) Carnot  (d) Brayton  (e) Joule.

Last Answer : Answer : c

The efficiency of Carnot cycle is maximum for  (a) gas engine  (b) well lubricated engine  (c) petrol engine  (d) steam engine  (e) reversible engine.

Description : The efficiency of Carnot cycle is maximum for  (a) gas engine  (b) well lubricated engine  (c) petrol engine  (d) steam engine  (e) reversible engine.

Last Answer : Answer : e

What is the thermodynamic temperature scale in the English system?  A. Kelvin scale  B. Celsius scale  C. Fahrenheit scale  D. Rankine scale

Description : What is the thermodynamic temperature scale in the English system?  A. Kelvin scale  B. Celsius scale  C. Fahrenheit scale  D. Rankine scale

Last Answer : Rankine scale

What is the thermodynamic temperature scale in the SI system?  A. Kelvin scale  B. Celsius scale  C. Fahrenheit scale  D. Rankine scale

Description : What is the thermodynamic temperature scale in the SI system?  A. Kelvin scale  B. Celsius scale  C. Fahrenheit scale  D. Rankine scale

Last Answer : Kelvin scale

Carnot cycle efficiency is maximum when  (a) initial temperature is 0°K  (b) final temperature is 0°K  (c) difference between initial and final temperature is 0°K  (d) final temperature is 0°C  (e) initial temperature is minimum possible.

Description : Carnot cycle efficiency is maximum when  (a) initial temperature is 0°K  (b) final temperature is 0°K  (c) difference between initial and final temperature is 0°K  (d) final temperature is 0°C  (e) initial temperature is minimum possible.

Last Answer : Answer : b

A perpetual motion machine is  (a) a thermodynamic machine  (b) a non-thermodynamic machine  (c) a hypothetical machine  (d) a hypothetical machine whose opera-tion would violate the laws of thermodynamics  (e) an inefficient machine.

Description : A perpetual motion machine is  (a) a thermodynamic machine  (b) a non-thermodynamic machine  (c) a hypothetical machine  (d) a hypothetical machine whose opera-tion would violate the laws of thermodynamics  (e) an inefficient machine.

Last Answer : Answer : d

For a thermodynamic process to be reversible, the temperature difference between hot body and working substance should be  (a) zero  (b) minimum  (d) maximum  (d) infinity  (e) there is no such criterion.

Description : For a thermodynamic process to be reversible, the temperature difference between hot body and working substance should be  (a) zero  (b) minimum  (d) maximum  (d) infinity  (e) there is no such criterion.

Last Answer : Answer : a

Which is the incorrect statement about Carnot cycle?  A. It is used as the alternate standard of comparison of all heat engines.  B. All the heat engines are based on Carnot cycle.  C. It provides concept of maximising work output between the two temperature limits.  D. all of the above

Description : Which is the incorrect statement about Carnot cycle?  A. It is used as the alternate standard of comparison of all heat engines.  B. All the heat engines are based on Carnot cycle.  C. It provides concept of maximising work output between the two temperature limits.  D. all of the above

Last Answer : Answer: B

What statement of the second law of thermodynamics states that it is impossible to build a device that operates in a cycle and produces no effect other than the transfer of heat from a lower-temperature body to a higher-temperature body?  A. Kelvin-Planck statement  B. Clausius statement  C. Kelvin statement  D. Rankine statement

Description : What statement of the second law of thermodynamics states that it is impossible to build a device that operates in a cycle and produces no effect other than the transfer of heat from a lower- ... A. Kelvin-Planck statement  B. Clausius statement  C. Kelvin statement  D. Rankine statement

Last Answer : Clausius statement

Carnot cycle efficiency depends upon  (a) properties of the medium/substance used  (b) condition of engine  (c) working condition  (d) temperature range of operation  (e) effectiveness of insulating material around the engine.

Description : Carnot cycle efficiency depends upon  (a) properties of the medium/substance used  (b) condition of engine  (c) working condition  (d) temperature range of operation  (e) effectiveness of insulating material around the engine.

Last Answer : Answer : d

In a Carnot cycle, heat is transferred at  (a) constant pressure  (b) constant volume  (c) constant temperature  (d) constant enthaply  (e) any one of the above.

Description : In a Carnot cycle, heat is transferred at  (a) constant pressure  (b) constant volume  (c) constant temperature  (d) constant enthaply  (e) any one of the above.

Last Answer : Answer : c

Thermodynamic cycle involved in the working of a thermal power plant is the __________ cycle. (A) Joule (B) Carnot (C) Rankine (D) Brayton

Description : Thermodynamic cycle involved in the working of a thermal power plant is the __________ cycle. (A) Joule (B) Carnot (C) Rankine (D) Brayton

Last Answer : (C) Rankine

Carnot cycle has maximum efficiency for  (a) reversible engine  (b) irreversible engine  (c) new engine  (d) petrol engine  (e) diesel engine.

Description : Carnot cycle has maximum efficiency for  (a) reversible engine  (b) irreversible engine  (c) new engine  (d) petrol engine  (e) diesel engine.

Last Answer : Answer : a

What is a heat engine that operates on the reversible Carnot cycle called?  A. Carnot heat engine  B. Ideal heat engine  C. Most efficient heat engine  D. Best heat engine

Description : What is a heat engine that operates on the reversible Carnot cycle called?  A. Carnot heat engine  B. Ideal heat engine  C. Most efficient heat engine  D. Best heat engine

Last Answer : Carnot heat engine

During which of the following process does heat rejection takes place in Carnot cycle?  A. Isothermal expansion  B. Isentropic expansion  C. Isothermal compression  D. Isentropic compression

Description : During which of the following process does heat rejection takes place in Carnot cycle?  A. Isothermal expansion  B. Isentropic expansion  C. Isothermal compression  D. Isentropic compression

Last Answer : Answer: C

If both Stirling and Carnot cycles operate within the same temperature limits, then efficiency of Stirling cycle as compared to Carnot cycle  (a) more  (b) less  (c) equal  (d) depends on other factors  (e) none of the above.

Description : If both Stirling and Carnot cycles operate within the same temperature limits, then efficiency of Stirling cycle as compared to Carnot cycle  (a) more  (b) less  (c) equal  (d) depends on other factors  (e) none of the above.

Last Answer : Answer : c

For which of the following substances, the internal energy and enthalpy are the functions of temperature only  (a) any gas  (b) saturated steam  (c) water  (d) perfect gas  (e) superheated steam.

Description : For which of the following substances, the internal energy and enthalpy are the functions of temperature only  (a) any gas  (b) saturated steam  (c) water  (d) perfect gas  (e) superheated steam.

Last Answer : Answer : d

The most efficient cycle that can operate between two constant temperature reservoir is the _________.  a. Otto Cycle  b. Lazare Cycle  c. Isothermal Cycle  d. Carnot Cycle

Description : The most efficient cycle that can operate between two constant temperature reservoir is the _________.  a. Otto Cycle  b. Lazare Cycle  c. Isothermal Cycle  d. Carnot Cycle

Last Answer : Carnot Cycle

Entropy change depends on  (a) heat transfer  (b) mass transfer  (c) change of temperature  (d) thermodynamic state  (e) change of pressure and volume.

Description : Entropy change depends on  (a) heat transfer  (b) mass transfer  (c) change of temperature  (d) thermodynamic state  (e) change of pressure and volume.

Last Answer : Answer : a

Which of the following best describes both Stirling and Ericson engines?  a. Internal combustion engine  b. External combustion engine  c. Diesel cycle  d. Rankine cycle

Description : Which of the following best describes both Stirling and Ericson engines?  a. Internal combustion engine  b. External combustion engine  c. Diesel cycle  d. Rankine cycle

Last Answer : External combustion engine

Which of the following cycle is used in vapor cycle power plant?  a. Brayton cycle  b. Diesel cycle  c. Ericson cycle  d. Rankine cycle

Description : Which of the following cycle is used in vapor cycle power plant?  a. Brayton cycle  b. Diesel cycle  c. Ericson cycle  d. Rankine cycle

Last Answer : Rankine cycle

What is the highest efficiency of heat engine operating between the two thermal energy reservoirs at temperature limits?  A. Ericson efficiency  B. Otto efficiency  C. Carnot efficiency  D. Stirling efficiency

Description : What is the highest efficiency of heat engine operating between the two thermal energy reservoirs at temperature limits?  A. Ericson efficiency  B. Otto efficiency  C. Carnot efficiency  D. Stirling efficiency

Last Answer : Carnot efficiency

First law of thermodynamics furnishes the relationship between  (a) heat and work  (b) heat, work and properties of the system  (c) various properties of the system  (d) various thermodynamic processes  (e) heat and internal energy.

Description : First law of thermodynamics furnishes the relationship between  (a) heat and work  (b) heat, work and properties of the system  (c) various properties of the system  (d) various thermodynamic processes  (e) heat and internal energy.

Last Answer : (b) heat, work and properties of the system

The following cycle is used for air craft refrigeration  (a) Brayton cycle  (b) Joule cycle  (c) Carnot cycle  (d) Bell-Coleman cycle  (e) Reversed-Brayton cycle.

Description : The following cycle is used for air craft refrigeration  (a) Brayton cycle  (b) Joule cycle  (c) Carnot cycle  (d) Bell-Coleman cycle  (e) Reversed-Brayton cycle.

Last Answer : Answer : e

Which of the following cycles is not a reversible cycle  (a) Carnot  (b) Ericsson  (c) Stirling  (d) Joule  (e) none of the above.

Description : Which of the following cycles is not a reversible cycle  (a) Carnot  (b) Ericsson  (c) Stirling  (d) Joule  (e) none of the above.

Last Answer : Answer : e

Carnot cycle is  (a) a reversible cycle (ft) an irreversible cycle  (c) a semi-reversible cycle  (d) a quasi static cycle  (e) an adiabatic irreversible cycle.

Description : Carnot cycle is  (a) a reversible cycle (ft) an irreversible cycle  (c) a semi-reversible cycle  (d) a quasi static cycle  (e) an adiabatic irreversible cycle.

Last Answer : Answer : a

Which of the following is an irreversible cycle  (a) carnot  (b) Stirling  (c) ericsson  (d) all of the above  (e) none of the above.

Description : Which of the following is an irreversible cycle  (a) carnot  (b) Stirling  (c) ericsson  (d) all of the above  (e) none of the above.

Last Answer : Answer : e

An actual engine is to be designed having same efficiency as the Carnot cycle. Such a proposition is  (a) feasible  (b) impossible  (c) possible  (d) possible, but with lot of sophistications  (e) desirable.

Description : An actual engine is to be designed having same efficiency as the Carnot cycle. Such a proposition is  (a) feasible  (b) impossible  (c) possible  (d) possible, but with lot of sophistications  (e) desirable.

Last Answer : Answer : d

Which of the following relations is not applicable in a free expansion process?  a. Heat is rejected to zero  b. Work done is zero  c. Change in temperature is zero  d. Heat supplied is zero

Description : Which of the following relations is not applicable in a free expansion process?  a. Heat is rejected to zero  b. Work done is zero  c. Change in temperature is zero  d. Heat supplied is zero

Last Answer : Change in temperature is zero

According to first law of thermodynamics  (a) mass and energy are mutually convertible  (b) Carnot engine is most efficient  (c) heat and work are mutually convertible  (d) mass and light are mutually convertible  (e) heat flows from hot substance to cold substance.

Description : According to first law of thermodynamics  (a) mass and energy are mutually convertible  (b) Carnot engine is most efficient  (c) heat and work are mutually convertible  (d) mass and light are mutually convertible  (e) heat flows from hot substance to cold substance.

Last Answer : Answer : c

Change in enthalpy of a system is the heat supplied at  (a) constant pressure  (b) constant temperature  (c) constant volume  (d) constant entropy  (e) N.T.P. condition.

Description : Change in enthalpy of a system is the heat supplied at  (a) constant pressure  (b) constant temperature  (c) constant volume  (d) constant entropy  (e) N.T.P. condition.

Last Answer : Answer : a

A series of operations, which takes place in a certain order and restore the initial conditions at the end, is known as  A. reversible cycle  B. irreversible cycle  C. thermodynamic cycle  D. none of these

Description : A series of operations, which takes place in a certain order and restore the initial conditions at the end, is known as  A. reversible cycle  B. irreversible cycle  C. thermodynamic cycle  D. none of these

Last Answer : Answer: C

Is a thermodynamic system that operates continuously with only energy (heat and work) crossing its boundaries?  a. Heat Engine  b. Heat Reservoir  c. Heat Source  d. Heat Sink

Description : Is a thermodynamic system that operates continuously with only energy (heat and work) crossing its boundaries?  a. Heat Engine  b. Heat Reservoir  c. Heat Source  d. Heat Sink

Last Answer : Heat Engine

The Carnot cycle is composed of ______ processes.  A. One isothermal and one adiabatic  B. One isothermal and two adiabatic  C. Two isothermal and one adiabatic  D. Two isothermal and two adiabatic

Description : The Carnot cycle is composed of ______ processes.  A. One isothermal and one adiabatic  B. One isothermal and two adiabatic  C. Two isothermal and one adiabatic  D. Two isothermal and two adiabatic

Last Answer : Two isothermal and two adiabatic

A cycle consisting of one constant pressure, one constant volume and two isentropic processes is known as  A.Carnot cycle  B.Stirling cycle  C.Otto cycle  D.Diesel cycle

Description : A cycle consisting of one constant pressure, one constant volume and two isentropic processes is known as  A.Carnot cycle  B.Stirling cycle  C.Otto cycle  D.Diesel cycle

Last Answer : Answer: D

It is used for gas turbines which operates on an open cycle where both the compression and expansion processes take place in rotating machinery.  a. Dual Cycle  b. Otto Cycle  c. Carnot Cycle  d. Brayton Cycle

Description : It is used for gas turbines which operates on an open cycle where both the compression and expansion processes take place in rotating machinery.  a. Dual Cycle  b. Otto Cycle  c. Carnot Cycle  d. Brayton Cycle

Last Answer : Brayton Cycle

A Bell-Coleman cycle is a reversed of which the following cycles?  a. Stirling cycle  b. Joule cycle  c. Carnot cycle  d. Otto cycle

Description : A Bell-Coleman cycle is a reversed of which the following cycles?  a. Stirling cycle  b. Joule cycle  c. Carnot cycle  d. Otto cycle

Last Answer : Joule cycle

The Carnot cycle is composed of how many reversible processes?  A. 2  B. 3  C. 4  D. 5

Description : The Carnot cycle is composed of how many reversible processes?  A. 2  B. 3  C. 4  D. 5

Last Answer : 4

Who proposed the Carnot cycle?  A. Sammy Carnot  B. Sonny Carnot  C. Sadi Carnot  D. Suri Carnot

Description : Who proposed the Carnot cycle?  A. Sammy Carnot  B. Sonny Carnot  C. Sadi Carnot  D. Suri Carnot

Last Answer : Sadi Carnot

Carnot cycle is the best known reversible cycle which was first proposed in what year?  A. 1842  B. 1824  C. 1832  D. 1834

Description : Carnot cycle is the best known reversible cycle which was first proposed in what year?  A. 1842  B. 1824  C. 1832  D. 1834

Last Answer : 1824

The efficiency of Joule cycle is  A. greater than Carnot cycle  B. less than Carnot cycle  C. equal to Carnot cycle  D. none of these

Description : The efficiency of Joule cycle is  A. greater than Carnot cycle  B. less than Carnot cycle  C. equal to Carnot cycle  D. none of these

Last Answer : Answer: B

The efficiency of Stirling cycle is __________ Carnot cycle.  A. greater than  B. less than  C. equal to

Description : The efficiency of Stirling cycle is __________ Carnot cycle.  A. greater than  B. less than  C. equal to

Last Answer : Answer: C

What device measures infrared radiation below?  a. thermocouple  b. thermopile  c. thermodynamic device  d. thermos

Description : What device measures infrared radiation below?  a. thermocouple  b. thermopile  c. thermodynamic device  d. thermos

Last Answer : thermopile

It is impossible for any process to have as its sole result the transfer of heat from a cooler to a hotter body  a. Carnot’s statement  b. Clausius statement  c. Rankine statement  d. Gauss statement

Description : It is impossible for any process to have as its sole result the transfer of heat from a cooler to a hotter body  a. Carnot’s statement  b. Clausius statement  c. Rankine statement  d. Gauss statement

Last Answer : Clausius statement

For which of the following substances, the gas laws can be used with minimum error  (a) dry steam  (b) wet steam  (c) saturated steam  (d) superheated steam  (e) steam at atmospheric pressure.

Description : For which of the following substances, the gas laws can be used with minimum error  (a) dry steam  (b) wet steam  (c) saturated steam  (d) superheated steam  (e) steam at atmospheric pressure.

Last Answer : Answer : d

The efficiency of a Carnot engine depends on  (a) working substance  (b) design of engine  (c) size of engine  (d) type of fuel fired  (e) temperatures of source and sink.

Description : The efficiency of a Carnot engine depends on  (a) working substance  (b) design of engine  (c) size of engine  (d) type of fuel fired  (e) temperatures of source and sink.

Last Answer : Answer : e