Description : When vapour is cooled at constant total system volume, the _______ changes. A] Volume. B] Pressure C] Temperature. D] None of the mentioned
Last Answer : B] Pressure
Description : Condensation starts at ________ point. A Dew B Bubble C Triple D none of the mentioned
Last Answer : A Dew
Description : _______ cooling towers use a process similar to the one found in small evaporative cooling units. a. Hyperboloid b. Tower c. Condensate loop d. None
Last Answer : a. Hyperboloid
Description : Why is exhaust system coming out of the turbine is admitted to a steam header 1 to increase the pressure 2 to increase the velocity 3 to decrease the pressure 4 to increase the velocity
Last Answer : 1 to increase the pressure
Description : The exhaust steam coming out of turbine is admitted to a steam header to A Increase the pressure B decrease the pressure C decrease the pressure drop D control the pollution
Last Answer : A Increase the pressure
Description : When vapour is compressed isothermally the ____________ changes. A] Volume. B] Pressure C] Temperature D] None of the mentioned
Last Answer : A] Volume.
Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure
Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure
Description : How is water circulated throughout the dry cooling tower system? a. Finned tubes b. Metal pipes c. Porous tubes d. Swifting tubes
Last Answer : a. Finned tubes
Description : What type of cooling system is used in the large power plants? a. Cooling ponds b. Natural flow system c. Cooling towers d. Single deck system
Last Answer : c. Cooling towers
Description : What are used in the direct flow system to transfer the pond batch uniting at intake? a. Separators b. Filters c. Baffle walls d. Porous pipes
Last Answer : c. Baffle walls
Description : In which type of cooling pond system are nozzles arranged on same elevation? a. Single deck system b. Double deck system c. Natural flow system d. Direct flow system
Last Answer : a. Single deck system
Description : How many number of spray nozzle does each module on spray pond cooling system contain? a. 1 b. 2 c. 3 d. 4
Last Answer : d. 4
Description : How does outside air enter into the wet cooling system? A Air vents B Louvers. C Tuyeres D Vacuum
Last Answer : B Louvers
Description : The open cooling is also called as? A Parallel system B Once through system C Air based system D Nonreversible system
Last Answer : B Once through system
Description : In which type of cooling system are nozzle arranged on different elevation? A Single deck system B Double deck system C Natural flow system D Direct flow system
Last Answer : B Double deck system
Description : How is water circulated throughout the dry cooling tower system? A] Finned tubes. B] Metal pipes C] Porous tubes. D] Swirling tubes
Last Answer : A] Finned tubes.
Description : How does outside air enter into the wet cooling system? A] Air vents B] Louvers. C] Tuyeres D] Vacuum
Last Answer : B] Louvers.
Description : What type of cooling system is used in the large power plants? A] Cooling ponds B] Natural flow system C] Cooling towers. D] Single deck system
Last Answer : C] Cooling towers.
Description : Open cooling system is also called as ____________ A] parallel system B] once through system C]air based system. D] non-reversible system
Last Answer : B] once through system
Description : The __________ that are present depend on cooling tower building material, as well. Cooling towers are built of concrete, wood, plastic or metal. a. Heat b. Pollutants c. Cold d. All of Above
Last Answer : b. Pollutants
Description : The hyperboloid shape also aids in accelerating the upward convective air flow, improving __________ efficiency. a. Heating b. Warming c. Cooling d. Cold
Last Answer : c. Cooling
Description : Hyperboloid cooling towers have become the design standard for all _______draft cooling towers because of their structural strength and minimum usage of material. a. Natural b. Induce c. Force d. None
Last Answer : a. Natural
Description : How is air produced in mechanical cooling tower 1 air fan 2 propeller fans 3 air blowers 4 propeller blowers
Last Answer : 2 propeller fans
Description : Which of the following is a fissile fuel 1 carbon 2 potassium 3 thorium 4 graphite
Last Answer : 3 thorium
Description : What are present depend on cooling tower building material as well 1 pollution 2 population 3 dust 4 none of these
Last Answer : 1 pollution
Description : What are built to cool down the cooling water in a power plant 1 Towers 2 Cooling pond 3 Air filter 4 non of these
Last Answer : 1 Towers
Description : What come out from the the cooling tower of a nuclear power plant 1 smoke 2 cool air 3 hot air 4 none of theses
Last Answer : 1 smoke
Description : Which of the following gives out highest pollutants to the atmosphere 1 cooling tower 2 water tower 3 steam tower 4 fire tower
Last Answer : 3 steam tower
Description : Which of the following is the simplest method of cooling the condenser water? a. Spray cooling pond b. Cooling tower c. Indirect air cooling d. Hyperbolic air cooling
Last Answer : a. Spray cooling pond
Description : Which one of the following the maximum effect on cooling tower performance A Fill media B Drift C Lourvers D Casing
Last Answer : A Fill media
Description : Wet cooling towers operate on the principle of ............... A Condensation. B Evaporative Cooling C Both of the above D None of the above
Last Answer : B Evaporative Cooling
Description : Approximately about________ of cooling in cooling tower is through The sensible cooling A 5% B 80% C 20% D 40%
Last Answer : C 20%
Description : Natural draft in hyperbolic cooling tower is used for production of a) Fertilizer b) Steel c) Chemical d) Electrical energy
Last Answer : d) Electrical energy
Description : Hyperbolic cooling towers used in a) Coal-fired power plant b) Nuclear plants c) Thermal power plant d) All of these
Last Answer : d) All of these
Description : Following is advantage of hyperbolic design a) Less initial cost b) Less noise c) Less vibration d) All above
Last Answer : b) Less noise
Description : Following is not the advantage of hyperbolic design a) Less maintenance cost b) Less initial cost c) Less noise d) All of the above
Last Answer : b) Less initial cost
Description : Hyperbolic design allows for use of without sacrificing structural integrity a) Minimum material b) Maximum material c) High quality material d) Low quality material
Last Answer : a) Minimum material
Description : Natural draft in hyperbolic cooling towers reduces of fans a) Damage b) Efficiency c) Cost d) Speed
Last Answer : c) Cost
Description : Beams of hyperbolic cooling towers are made up of a) Tungsten b) Iron c) Stainless steel d) Brass
Last Answer : c) Stainless steel
Description : Design of hyperbolic cooling tower standard for all cooling tower a) Mechanical draft b) Natural draft c) Both a & b d) Neither a & b
Last Answer : b) Natural draft
Description : Hyperbolic cooling towers generally used in the a) Steel industry b) Fertilizer industry c) Alumina industry d) Power industry
Last Answer : d) Power industry
Description : How is air produced in mechanical draught cooling tower? A] Air Tuyeres. B] Propeller fans C] Air blowers. D] Louvre
Last Answer : B] Propeller fans
Description : Wet cooling towers (or open circuit cooling towers) operate on the principle of ............... A] Condensation. B] Evaporative cooling C] Both of the above D] None of the above
Last Answer : B] Evaporative cooling
Description : Which of the following is the simplest method of cooling the condenser water? A] Spray cooling pond B] Cooling tower C] Indirect air cooling D] Hyperbolic cooling tower
Last Answer : A] Spray cooling pond
Description : The gas in a constant gas thermometer cooled to absolute zero would have _________. a. no volume b. no pressure c. zero temperature at all scales d. none of the above
Last Answer : no pressure
Description : A liquid under pressure greater than its vapour pressure for the temperature involved is called a __________ liquid. (A) Sub-cooled (B) Saturated (C) Non-solidifiable (D) None of these
Last Answer : (A) Sub-cooled
Description : __________ is the temperature at which a gas-vapor mixture becomes saturated, when cooled at constant total pressure out of contact with a liquid. (A) Dew point (B) Bubble point (C) Dry bulb temperature (D) Wet bulb temperature
Last Answer : (A) Dew point
Description : If helium is introduced in a reactor containing O2 , SO2 and SO3 at equilibrium, so that total pressure increases while volume and temperature remains constant. In this case the dissociation of SO3 ( ... 's principle). (A) Decreases (B) Increases (C) Remains unaltered (D) Changes unpredictably
Last Answer : (A) Decreases
Description : Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of ... is negligible compared with that in the vapour state (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : During which of following process does heat rejection take place in Carnot vapour cycle? [IES-1992] (a) Constant volume (b) constant pressure (c) Constant temperature (d) constant entropy
Last Answer : (c) Constant temperature