During which of following process does heat rejection take place in Carnot vapour cycle? [IES-1992] (a) Constant volume (b) constant pressure (c) Constant temperature (d) constant entropy

During which of following process does heat rejection take place in Carnot
vapour cycle? [IES-1992]
(a) Constant volume (b) constant pressure
(c) Constant temperature (d) constant entropy
by

1 Answer

Answer :

(c) Constant temperature
by

Related questions

Consider the following processes: [IES-1999] 1. Constant pressure heat addition. 2. Adiabatic compression. 3. Adiabatic expansion. 4. Constant pressure heat rejection. The correct sequence of these processes in Rankine cycle is: (a) 1, 2, 3, 4 (b) 2, 1, 4, 3 (c) 2, 1, 3, 4 (d) 1, 2, 4, 3

Description : Consider the following processes: [IES-1999] 1. Constant pressure heat addition. 2. Adiabatic compression. 3. Adiabatic expansion. 4. Constant pressure heat rejection. The correct sequence of these processes in Rankine cycle is: (a) 1, 2, 3, 4 (b) 2, 1, 4, 3 (c) 2, 1, 3, 4 (d) 1, 2, 4, 3

Last Answer : (c) 2, 1, 3, 4 

In thermal power plants, coal is transferred from bunker to the other places by [IES-1992] (a) Hoists (b) conveyors (c) cranes (d) lifts

Description : In thermal power plants, coal is transferred from bunker to the other places by [IES-1992] (a) Hoists (b) conveyors (c) cranes (d) lifts 

Last Answer : (b) conveyors

In a Rankine cycle, with the maximum steam temperature being fixed from metallurgical considerations, as the boiler pressure increases (a) The condenser load will increase [IES-1997] (b) The quality of turbine exhaust will decrease (c) The quality of turbine exhaust will increase (d) The quality of turbine exhaust will remain unchanged

Description : In a Rankine cycle, with the maximum steam temperature being fixed from metallurgical considerations, as the boiler pressure increases (a) The condenser load will increase [IES-1997] (b) The ... The quality of turbine exhaust will increase (d) The quality of turbine exhaust will remain unchanged

Last Answer : (b) The quality of turbine exhaust will decrease 

In steam and other vapour cycles, the process of removing noncondensable is called [GATE-1992] (a) Scavenging process (b) Deaeration process (c) Exhaust process (d) Condensation process

Description : In steam and other vapour cycles, the process of removing noncondensable is called [GATE-1992] (a) Scavenging process (b) Deaeration process (c) Exhaust process (d) Condensation process  

Last Answer : (b) Deaeration process  

A thermoelectric engine which consists of two dissimilar electric conductors connected at two junctions maintained at different temperatures, converts (a) Electric energy into heat energy [IES-2006] (b) Heat energy into electric energy (c) Mechanical work into electric energy (d) Electric energy into mechanical work

Description : A thermoelectric engine which consists of two dissimilar electric conductors connected at two junctions maintained at different temperatures, converts (a) Electric energy into heat energy [IES-2006] (b ... energy (c) Mechanical work into electric energy (d) Electric energy into mechanical work  

Last Answer : (b) Heat energy into electric energy  

In a Rankine cycle, regeneration results in higher efficiency because (a) Pressure inside the boiler increases [GATE-2003] (b) Heat is added before steam enters the low pressure turbine (c) Average temperature of heat addition in the boiler increases (d) Total work delivered by the turbine increases

Description : In a Rankine cycle, regeneration results in higher efficiency because (a) Pressure inside the boiler increases [GATE-2003] (b) Heat is added before steam enters the low pressure turbine (c) ... temperature of heat addition in the boiler increases (d) Total work delivered by the turbine increases 

Last Answer : (c) Average temperature of heat addition in the boiler increases  

The efficiency of superheat Rankine cycle is higher than that of simple Rankine cycle because [GATE-2002] (a) The enthalpy of main steam is higher for superheat cycle (b) The mean temperature of heat addition is higher for superheat cycle (c) The temperature of steam in the condenser is high (d) The quality of stem in the condenser is low

Description : The efficiency of superheat Rankine cycle is higher than that of simple Rankine cycle because [GATE-2002] (a) The enthalpy of main steam is higher for superheat cycle (b) The mean temperature of heat ... temperature of steam in the condenser is high (d) The quality of stem in the condenser is low 

Last Answer :  (b) The mean temperature of heat addition is higher for superheat cycle  

For a given set of operating pressure limits of a Rankine cycle, the highest, efficiency occurs for [GATE-1994] (a) Saturated cycle (b) Superheated cycle (c) Reheat cycle (d) Regenerative cycle.

Description : For a given set of operating pressure limits of a Rankine cycle, the highest, efficiency occurs for [GATE-1994] (a) Saturated cycle (b) Superheated cycle (c) Reheat cycle (d) Regenerative cycle. 

Last Answer : (d) Regenerative cycle. 

Carnot cycle is also termed as the constant __________ cycle in thermodynamics. (A) Entropy (B) Pressure (C) Volume (D) Heat

Description : Carnot cycle is also termed as the constant __________ cycle in thermodynamics. (A) Entropy (B) Pressure (C) Volume (D) Heat

Last Answer : Option D

During which of the following process does heat rejection takes place in Carnot cycle?  A. Isothermal expansion  B. Isentropic expansion  C. Isothermal compression  D. Isentropic compression

Description : During which of the following process does heat rejection takes place in Carnot cycle?  A. Isothermal expansion  B. Isentropic expansion  C. Isothermal compression  D. Isentropic compression

Last Answer : Answer: C

In a Carnot cycle, heat is transferred at  (a) constant pressure  (b) constant volume  (c) constant temperature  (d) constant enthaply  (e) any one of the above.

Description : In a Carnot cycle, heat is transferred at  (a) constant pressure  (b) constant volume  (c) constant temperature  (d) constant enthaply  (e) any one of the above.

Last Answer : Answer : c

The correct sequence of factors in order of deceasing importance for location of a thermal power plant is [IAS-2001] (a) load, coal, water (b) coal, water, load (c) Water, load, coal (d) water, coal, load

Description : The correct sequence of factors in order of deceasing importance for location of a thermal power plant is [IAS-2001] (a) load, coal, water (b) coal, water, load (c) Water, load, coal (d) water, coal, load

Last Answer : (b) coal, water, load 

Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Description : Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Last Answer : Answer: D

Change in internal energy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Description : Change in internal energy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Last Answer : Answer : c

Change in enthalpy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Description : Change in enthalpy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Last Answer : Answer : a

In which of the following cycle heat is added at constant volume? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Description : In which of the following cycle heat is added at constant volume? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Last Answer : Answer a. Otto cycle

A cycle consisting of one constant pressure, one constant volume and two isentropic processes is known as  A.Carnot cycle  B.Stirling cycle  C.Otto cycle  D.Diesel cycle

Description : A cycle consisting of one constant pressure, one constant volume and two isentropic processes is known as  A.Carnot cycle  B.Stirling cycle  C.Otto cycle  D.Diesel cycle

Last Answer : Answer: D

Which of the following has the minimum value of COP for a given refrigeration effect? (A) Reverse Carnot cycle (B) Ordinary vapour-compression cycle (C) Vapour-compression process with a reversible expansion engine (D) Air refrigeration cycle

Description : Which of the following has the minimum value of COP for a given refrigeration effect? (A) Reverse Carnot cycle (B) Ordinary vapour-compression cycle (C) Vapour-compression process with a reversible expansion engine (D) Air refrigeration cycle

Last Answer : (D) Air refrigeration cycle

In which of the following cycle heat is added at constant pressure? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Description : In which of the following cycle heat is added at constant pressure? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Last Answer : Answer b. Diesel cycle

Change in enthalpy of a system is the heat supplied at  (a) constant pressure  (b) constant temperature  (c) constant volume  (d) constant entropy  (e) N.T.P. condition.

Description : Change in enthalpy of a system is the heat supplied at  (a) constant pressure  (b) constant temperature  (c) constant volume  (d) constant entropy  (e) N.T.P. condition.

Last Answer : Answer : a

The air standard Otto cycle comprises a two constant pressure processes and two constant volume processes b two constant pressure and two constant entropy processes c. two constant volume processes and two constant entropy processes d. none of the above.

Description : The air standard Otto cycle comprises a two constant pressure processes and two constant volume processes b two constant pressure and two constant entropy processes c. two constant volume processes and two constant entropy processes d. none of the above.

Last Answer : ANSWER (c) two constant volume processes and two constant entropy processes

Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of vaporisation is constant (C) Volume in the liquid state is negligible compared with that in the vapour state (D) All (A), (B) and (C)

Description : Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of ... is negligible compared with that in the vapour state (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Isobaric process means a constant process. (A) Temperature (B) Pressure (C) Volume (D) Entropy

Description : Isobaric process means a constant process. (A) Temperature (B) Pressure (C) Volume (D) Entropy

Last Answer : (B) Pressure

If value of n is infinitely large in a polytropic process pV” = C, then the process is known as constant  (a) volume  (b) pressure  (c) temperature  (d) enthalpy  (e) entropy

Description : If value of n is infinitely large in a polytropic process pV” = C, then the process is known as constant  (a) volume  (b) pressure  (c) temperature  (d) enthalpy  (e) entropy

Last Answer : Answer : a

Efficiency of a heat engine working on Carnot cycle between two temperature levels depends upon the (A) Two temperatures only (B) Pressure of working fluid (C) Mass of the working fluid (D) Mass and pressure both of the working fluid

Description : Efficiency of a heat engine working on Carnot cycle between two temperature levels depends upon the (A) Two temperatures only (B) Pressure of working fluid (C) Mass of the working fluid (D) Mass and pressure both of the working fluid

Last Answer : (A) Two temperatures only

Most of the domestic refrigerators work on the following refrigeration system (a) vapour compression (b) vapour absorption (c) carnot cycle (d) electrolux refrigerator

Description : Most of the domestic refrigerators work on the following refrigeration system (a) vapour compression (b) vapour absorption (c) carnot cycle (d) electrolux refrigerator

Last Answer : Ans: a

The vapour compression refrigerator employs the following cycle (a) Rankine (b) Carnot (c) Reversed Carnot. (d) Brayton

Description : The vapour compression refrigerator employs the following cycle (a) Rankine (b) Carnot (c) Reversed Carnot. (d) Brayton

Last Answer : Ans: c

Vapour compression refrigeration is some what like (a) Carnot cycle (b) Rankine cycle (c) reversedCamot cycle (d) reversed Rankine cycle

Description : Vapour compression refrigeration is some what like (a) Carnot cycle (b) Rankine cycle (c) reversedCamot cycle (d) reversed Rankine cycle

Last Answer : Ans: C

Domestic refrigerator usually works on the __________ refrigeration cycle. (A) Carnot (B) Air (C) Absorption (D) vapour-ejection

Description : Domestic refrigerator usually works on the __________ refrigeration cycle. (A) Carnot (B) Air (C) Absorption (D) vapour-ejection

Last Answer : (C) Absorption

Out of the following refrigeration cycles, which one has the minimum COP (Co-efficient of performance)? (A) Air cycle (B) Carnot cycle (C) Ordinary vapour compression cycle (D) Vapour compression with a reversible expansion engine

Description : Out of the following refrigeration cycles, which one has the minimum COP (Co-efficient of performance)? (A) Air cycle (B) Carnot cycle (C) Ordinary vapour compression cycle (D) Vapour compression with a reversible expansion engine

Last Answer : A) Air cycle

What are the names given to constant temperature, constant pressure, constant volume, constant internal energy, constant enthalpy, and constant entropy processes.

Description : What are the names given to constant temperature, constant pressure, constant volume, constant internal energy, constant enthalpy, and constant entropy processes.

Last Answer : Isothermal, isochroic, isobaric, free expression, throttling and adiabatic processes respectively.

Which of the following parameters is constant for a mole for most of the gases at a given temperature and pressure  (a) enthalpy  (b) volume  (c) mass  (d) entropy  (e) specific volume.

Description : Which of the following parameters is constant for a mole for most of the gases at a given temperature and pressure  (a) enthalpy  (b) volume  (c) mass  (d) entropy  (e) specific volume.

Last Answer : Answer : b

The most efficient cycle that can operate between two constant temperature reservoir is the _________.  a. Otto Cycle  b. Lazare Cycle  c. Isothermal Cycle  d. Carnot Cycle

Description : The most efficient cycle that can operate between two constant temperature reservoir is the _________.  a. Otto Cycle  b. Lazare Cycle  c. Isothermal Cycle  d. Carnot Cycle

Last Answer : Carnot Cycle

Pick out the wrong statement. (A) The net change in entropy in any reversible cycle is always zero (B) The entropy of the system as a whole in an irreversible process increases (C) The entropy of the universe tends to a maximum (D) The entropy of a substance does not remain constant during a reversible adiabatic change

Description : Pick out the wrong statement. (A) The net change in entropy in any reversible cycle is always zero (B) The entropy of the system as a whole in an irreversible process increases (C) The ... to a maximum (D) The entropy of a substance does not remain constant during a reversible adiabatic change

Last Answer : (D) The entropy of a substance does not remain constant during a reversible adiabatic change

Entropy change depends on  (a) heat transfer  (b) mass transfer  (c) change of temperature  (d) thermodynamic state  (e) change of pressure and volume.

Description : Entropy change depends on  (a) heat transfer  (b) mass transfer  (c) change of temperature  (d) thermodynamic state  (e) change of pressure and volume.

Last Answer : Answer : a

If a heat pump cycle operates between the condenser temperature of +27°C and evaporator temperature of - 23°C,then the Carnot COP will be (a) 0.2 (b) 1.2 (c) 5 (d) 6

Description : If a heat pump cycle operates between the condenser temperature of +27°C and evaporator temperature of - 23°C,then the Carnot COP will be (a) 0.2 (b) 1.2 (c) 5 (d) 6

Last Answer : Ans: d

The main feature of Carnot refrigeration cycle is that, it (A) Does not need the addition of external work for its functioning (B) Transfers heat from high temperature to low temperature (C) Accomplishes the reverse effect of the heat engine (D) None of these

Description : The main feature of Carnot refrigeration cycle is that, it (A) Does not need the addition of external work for its functioning (B) Transfers heat from high temperature to low temperature (C) Accomplishes the reverse effect of the heat engine (D) None of these

Last Answer : (C) Accomplishes the reverse effect of the heat engine

Which is the incorrect statement about Carnot cycle?  A. It is used as the alternate standard of comparison of all heat engines.  B. All the heat engines are based on Carnot cycle.  C. It provides concept of maximising work output between the two temperature limits.  D. all of the above

Description : Which is the incorrect statement about Carnot cycle?  A. It is used as the alternate standard of comparison of all heat engines.  B. All the heat engines are based on Carnot cycle.  C. It provides concept of maximising work output between the two temperature limits.  D. all of the above

Last Answer : Answer: B

The thermodynamic difference between a Rankine cycle working with saturated steam and the Carnot cycle is that  (a) carnot cycle can’t work with saturated steam  (b) heat is supplied to water at temperature below the maximum temperature of the cycle  (c) a rankine cycle receives heat at two places  (d) rankine cycle is hypothetical  (e) none of the above.

Description : The thermodynamic difference between a Rankine cycle working with saturated steam and the Carnot cycle is that  (a) carnot cycle can't work with saturated steam  (b) heat is supplied to water at temperature ... heat at two places  (d) rankine cycle is hypothetical  (e) none of the above.

Last Answer : Answer : b

Which of the following diagramInternal energy is equal to the heat absorbed in case of a/an __________ process. (A) Constant volume (B) Polytropic (C) Adiabatic (D) Constant pressure s does not represent an Otto cycle?

Description : Which of the following diagrams does not represent an Otto cyInternal energy is equal to the heat absorbed in case of a/an __________ process. (A) Constant volume (B) Polytropic (C) Adiabatic (D) Constant pressure cle?

Last Answer : (A) Constant volume

In vapour compression refrigeration system, if the evaporator temperature and the condenser temperatures are -13°C and 37°C respectively, the Carnot COP will be (A) 5.2 (B) 6.2 (C) 0.168 (D) Data insufficient, can't be found out

Description : In vapour compression refrigeration system, if the evaporator temperature and the condenser temperatures are -13°C and 37°C respectively, the Carnot COP will be (A) 5.2 (B) 6.2 (C) 0.168 (D) Data insufficient, can't be found out

Last Answer : A) 5.2

When vapour is cooled at constant total system volume, the _______ changes. A Volume. B PRESSURE C Temperature. D None of the mentioned.

Description : When vapour is cooled at constant total system volume, the _______ changes. A Volume. B PRESSURE C Temperature. D None of the mentioned.

Last Answer : B PRESSURE

When vapour is cooled at constant total system volume, the _______ changes. A] Volume. B] Pressure C] Temperature. D] None of the mentioned

Description : When vapour is cooled at constant total system volume, the _______ changes. A] Volume. B] Pressure C] Temperature. D] None of the mentioned

Last Answer : B] Pressure

Vertical lines on pressure-enthalpy chart show constant (a) pressure lines (b) temperature lines (c) total heat lines (d) entropy lines

Description : Vertical lines on pressure-enthalpy chart show constant (a) pressure lines (b) temperature lines (c) total heat lines (d) entropy lines

Last Answer : Ans: c

Short horizontal lines on pressure-enthalpy chart show (a) constant pressure lines (b) constant temperature lines (c) constant total heat lines (d) constant entropy lines

Description : Short horizontal lines on pressure-enthalpy chart show (a) constant pressure lines (b) constant temperature lines (c) constant total heat lines (d) constant entropy lines

Last Answer : Ans: a

Which of the following remains constant during evaporative cooling process with recirculated water supply? (A) Relative humidity (B) Partial pressure of vapour (C) Wet bulb temperature (D) None of these

Description : Which of the following remains constant during evaporative cooling process with recirculated water supply? (A) Relative humidity (B) Partial pressure of vapour (C) Wet bulb temperature (D) None of these

Last Answer : (C) Wet bulb temperature

In thermodynamics, a throttling process, also called a _________, is a type of isenthalpic process where a liquid or gas is cooled as it passes from a higher pressure state to a lower pressure state.  a. Rankine Process  b. Carnot Cycle  c. Joule-Thomson process  d. Refrigeration process

Description : In thermodynamics, a throttling process, also called a _________, is a type of isenthalpic process where a liquid or gas is cooled as it passes from a higher pressure state to a lower pressure state.  a. Rankine Process  b. Carnot Cycle  c. Joule-Thomson process  d. Refrigeration process

Last Answer : Joule-Thomson process

According to first law of thermodynamics  (a) work done by a system is equal to heat transferred by the system  (b) total internal energy of a system during a process remains constant  (c) internal energy, enthalpy and entropy during a process remain constant  (d) total energy of a system remains constant

Description : According to first law of thermodynamics  (a) work done by a system is equal to heat transferred by the system  (b) total internal energy of a system during a process remains constant  ( ... , enthalpy and entropy during a process remain constant  (d) total energy of a system remains constant

Last Answer : Answer : d

For a thermodynamic system undergoing a process, which of the following pairs best expresses the relationship similar to that expressed by the pressure volume plot? (A) Temperature - entropy (B) Temperature - pressure (C) Enthalpy - entropy

Description : For a thermodynamic system undergoing a process, which of the following pairs best expresses the relationship similar to that expressed by the pressure volume plot? (A) Temperature - entropy (B) Temperature - pressure (C) Enthalpy - entropy

Last Answer : (A) Temperature - entropy

Pick out the wrong statement. (A) Surface tension of a substance vanishes at critical point, as there is no distinction between liquid and vapour phases at its critical point (B) Entropy of a system decreases with the evolution of heat (C) Change of internal energy is negative for exothermic reactions (D) The eccentric factor for all materials is always more than one

Description : Pick out the wrong statement. (A) Surface tension of a substance vanishes at critical point, as there is no distinction between liquid and vapour phases at its critical point (B) Entropy of ... is negative for exothermic reactions (D) The eccentric factor for all materials is always more than one

Last Answer : (D) The eccentric factor for all materials is always more than one