In a frame transmission, CRC stands for (A) Code Renewable Check (B) Cyclic Redundancy Check (C) Control and Refresh Code (D) Cyclic Refreshing of CPU

In a frame transmission, CRC stands for
(A) Code Renewable Check
(B) Cyclic Redundancy Check
(C) Control and Refresh Code
(D) Cyclic Refreshing of CPU
by

1 Answer

Answer :

(B) Cyclic Redundancy Check
by

Related questions

CRC stands for __________ a. cyclic redundancy check b. code repeat check c. code redundancy check d. cyclic repeat check

Description : CRC stands for __________ a. cyclic redundancy check b. code repeat check c. code redundancy check d. cyclic repeat check

Last Answer : a. cyclic redundancy check

CRC stands for __________ A. cyclic redundancy check B. code repeat check C. code redundancy check D. cyclic repeat check

Description : CRC stands for __________ A. cyclic redundancy check B. code repeat check C. code redundancy check D. cyclic repeat check

Last Answer : A. cyclic redundancy check

. In cyclic redundancy checking, the divisor is _______the CRC. A) The same size as B) one bit less than C) one bit more than D) none of the above

Description : . In cyclic redundancy checking, the divisor is _______the CRC. A) The same size as B) one bit less than C) one bit more than D) none of the above

Last Answer : one bit more than

The technique of temporarily delaying outgoing acknowledgements so that they can be hooked onto the next outgoing data frame is called ____________ a. piggybacking b. cyclic redundancy check c. fletcher’s checksum d. parity check

Description : The technique of temporarily delaying outgoing acknowledgements so that they can be hooked onto the next outgoing data frame is called ____________ a. piggybacking b. cyclic redundancy check c. fletcher’s checksum d. parity check

Last Answer : a. piggybacking

The technique of temporarily delaying outgoing acknowledgements so that they can be hooked onto the next outgoing data frame is called ____________ A. piggybacking B. cyclic redundancy check C. fletcher’s checksum D. parity check

Description : The technique of temporarily delaying outgoing acknowledgements so that they can be hooked onto the next outgoing data frame is called ____________ A. piggybacking B. cyclic redundancy check C. fletcher’s checksum D. parity check

Last Answer : A. piggybacking

In a single stage network: (A) There is no redundancy (B) There is redundancy (C) Alternative cross points are available (D) Alternative paths are available

Description : In a single stage network: (A) There is no redundancy (B) There is redundancy (C) Alternative cross points are available (D) Alternative paths are available

Last Answer : (B) There is redundancy

Is the cyclic redundancy check better than hamming code?

Description : Is the cyclic redundancy check better than hamming code?

Last Answer : It depends on what you are doing.The cyclic redundancy check will only detect an error, while thehamming code can also correct many types of errors. However toperform this correction the extra ... channels, disk sectors).Normally hamming code is done on individual bytes or words ofcomputer memory.

SPC stands (A) Standard Protocol Control (B) Stored Program Control (C) Signaling and switching Centre (D) Signaling Process Center

Description : SPC stands (A) Standard Protocol Control (B) Stored Program Control (C) Signaling and switching Centre (D) Signaling Process Center

Last Answer : (B) Stored Program Control

Write short notes (i)Telephone hand set and it’s working. (ii) CPU based exchange

Description : Write short notes (i)Telephone hand set and it’s working. (ii) CPU based exchange

Last Answer : (i) A standard telephone set is comprised of a transmitter, a receiver, and electrical network for equalization, associated circuitry to control side tone levels and to regulate signal power, ... commands are designed to be of variable length necessitating the use of an end-of-command symbol  

The divisor in a cyclic code is normally called the _________. A) degree B) generator C) redundancy D) none of the above

Description : The divisor in a cyclic code is normally called the _________. A) degree B) generator C) redundancy D) none of the above

Last Answer : generator

What are transmission bridges? How do they help in satisfying the connectivity?

Description : What are transmission bridges? How do they help in satisfying the connectivity?

Last Answer : A typical transmission bridge is shown in Fig. The series capacitance and the shunt inductances of the two relays provide a high-pass filter to transmit the AC speech signals, while the relays respond independently to the DC loop/disconnect signals from the calling and called customer.  

What are wired and wireless transmission systems? Explain the mechanisms of propagation of radio communication.

Description : What are wired and wireless transmission systems? Explain the mechanisms of propagation of radio communication.

Last Answer :  Transmission Systems: Modern long distance transmission systems can be placed under three broad categories: 1. Radio Systems 2. Coaxial cable systems 3. Optical fibre systems  ... microwave communication limited by horizon. 3. Troposphere scatter communication 4. Satellite communication. 

Network Layer is used for (A) Breaking up the data in frames for transmission (B) Deal with Error correction (C) Automatic Recovery of Procedure (D) Physical Architecture

Description : Network Layer is used for (A) Breaking up the data in frames for transmission (B) Deal with Error correction (C) Automatic Recovery of Procedure (D) Physical Architecture

Last Answer : (D) Physical Architecture

Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Description : Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Last Answer : (B) Serial

Common channel signalling______________ (A) Uses the speech or data path for signaling. (B) Does not use the speech or data path for signaling. (C) Needs no additional transmission facilities. (D) Finds it difficult to handle signaling during speech.

Description : Common channel signalling______________ (A) Uses the speech or data path for signaling. (B) Does not use the speech or data path for signaling. (C) Needs no additional transmission facilities. (D) Finds it difficult to handle signaling during speech.

Last Answer : (C) Needs no additional transmission facilities.

What are different control function categories, explain, how they help in signalling and control.

Description : What are different control function categories, explain, how they help in signalling and control.

Last Answer : In some switching systems, the control subsystem may be an integral part of the switching network itself. Such system is known as direct control switching systems. Those systems in which the control ... may be carried out at the level of the common control unit or the switching network.  

Explain the following terms: progressive control, common control and stored program control.

Description : Explain the following terms: progressive control, common control and stored program control.

Last Answer : (i) Progressive Control: Step by step system is an example of progressive control. The connection is set up in stages, in response to the digits dialed and each step in setting up the ... some of the features that have become possible due to the application of SPC to telephone switching  

Write short notes on: i. Stored Program Control. ii. Congestion. iii. Common channel signaling. iv. PSTN.

Description : Write short notes on: i. Stored Program Control. ii. Congestion. iii. Common channel signaling. iv. PSTN.

Last Answer : (i) Stored Program Control: In centralized control, all the control equipment is replaced by a single processor which must be quite powerful. It must be capable of processing 10 to 100 calls ... the combination of lines and switches that from a system of electrical routes through the network.  

What is meant by common control? Explain all the categories that are served by Common Control switching.

Description : What is meant by common control? Explain all the categories that are served by Common Control switching.

Last Answer : In some switching systems, the control subsystem may be an integral part of the switching network itself. Such system is known as direct control switching systems. Those systems in which the control ... may be carried out at the level of the common control unit or the switching network.  

What is store program control (SPC)? Give the organization of centralized SPC. Discuss the advantages of SPC automation in telephone switching.

Description : What is store program control (SPC)? Give the organization of centralized SPC. Discuss the advantages of SPC automation in telephone switching.

Last Answer :  In stored program control systems, a program or set of instructions to the computer is stored in its memory and the instructions are executed automatically one by one by the processor. Carrying out ... of services can be provided to customers.  (v) Increase level of automotive in switching 

The Signalling connection control part (SCCP) and message transfer part (MTP) together are referred to as (A) Signal Switching Points (SSPs) (B) Signal Transfer Points (STPs) (C) Signal Control Points (SCPs) (D) Network service part (NSP)

Description : The Signalling connection control part (SCCP) and message transfer part (MTP) together are referred to as (A) Signal Switching Points (SSPs) (B) Signal Transfer Points (STPs) (C) Signal Control Points (SCPs) (D) Network service part (NSP)

Last Answer : (D) Network service part (NSP)

In a time division space switch the size of the control memory is N and its Width: (A)Log10M (B) LogeM (C) LogNM (D) Log2M Where N are the outlets and M the number of data samples

Description : In a time division space switch the size of the control memory is N and its Width: (A)Log10M (B) LogeM (C) LogNM (D) Log2M Where N are the outlets and M the number of data samples

Last Answer : Ans: (It should be 2 log2[N]

MAC is the abbreviation for: (A) Multimedia access control (B) Media access control (C) Mobile access control (D) Master access point control

Description : MAC is the abbreviation for: (A) Multimedia access control (B) Media access control (C) Mobile access control (D) Master access point control

Last Answer : (B) Media access control

SS7 Protocol uses: (A) Out of band signalling. (B) Associated signalling. (C) Speech control signalling. (D) No signalling.

Description : SS7 Protocol uses: (A) Out of band signalling. (B) Associated signalling. (C) Speech control signalling. (D) No signalling.

Last Answer : (A) Out of band signalling.

SPC is used for (A) Carrying Exchange Control Functions (B) Carrying Subscriber Control Functions (C) Exchange Hardware (D) Signalling Purpose

Description : SPC is used for (A) Carrying Exchange Control Functions (B) Carrying Subscriber Control Functions (C) Exchange Hardware (D) Signalling Purpose

Last Answer : (A) Carrying Exchange Control Functions

MAC address helps in (A) multimedia access control. (B) media access control. (C) mobile access control. (D) master access point control

Description : MAC address helps in (A) multimedia access control. (B) media access control. (C) mobile access control. (D) master access point control

Last Answer : (B) media access control.

Common channel signalling in SS7 is (A) out band control channel. (B) in band control channel. (C) speech control channel. (D) none of the above.

Description : Common channel signalling in SS7 is (A) out band control channel. (B) in band control channel. (C) speech control channel. (D) none of the above.

Last Answer : (B) in band control channel.

Error detection ata data link level is achieved by A. bit stuffing B. cyclic redundancy codes C. Hamming codes D. equalization

Description : Error detection ata data link level is achieved by A. bit stuffing B. cyclic redundancy codes C. Hamming codes D. equalization

Last Answer : cyclic redundancy codes

Using which method in transport layer data integrity can be ensured? a. Checksum b. Repetition codes c. Cyclic redundancy checks d. Error correcting codes

Description : Using which method in transport layer data integrity can be ensured? a. Checksum b. Repetition codes c. Cyclic redundancy checks d. Error correcting codes

Last Answer : a. Checksum

Using which layer in transport layer data integrity can be assured? A. Checksum B. Repetition codes C. Cyclic redundancy checks D. Error correction codes

Description : Using which layer in transport layer data integrity can be assured? A. Checksum B. Repetition codes C. Cyclic redundancy checks D. Error correction codes

Last Answer : A. Checksum 

In the Ethernet frame, the_______field contains error detection information. A) CRC B) preamble C) address D) none of the above

Description : In the Ethernet frame, the_______field contains error detection information. A) CRC B) preamble C) address D) none of the above

Last Answer : CRC

In the Ethernet, the _______field is actually added at the physical layer and isnot (formally)part of the frame. A) CRC B) preamble C) address D) none of the above

Description : In the Ethernet, the _______field is actually added at the physical layer and isnot (formally)part of the frame. A) CRC B) preamble C) address D) none of the above

Last Answer : preamble

Which of the following statements is TRUE? a. Both Ethernet frame and IP packet include checksum fields b. Ethernet frame includes a checksum field and IP packet includes a CRC field c. Ethernet frame includes a CRC field and IP packet includes a checksum field d. Both Ethernet frame and IP packet include CRC fields

Description : Which of the following statements is TRUE? a. Both Ethernet frame and IP packet include checksum fields b. Ethernet frame includes a checksum field and IP packet includes a CRC field c. Ethernet ... and IP packet includes a checksum field d. Both Ethernet frame and IP packet include CRC fields

Last Answer : Ethernet frame includes a CRC field and IP packet includes a checksum field

If the frame to be transmitted is 1101011011 and the CRC polynomial to be used for generating checksum is x 4+ x + 1, then what is the transmitted frame? a. 11010110111011 b. 11010110111101 c. 11010110111110 d. 11010110111001

Description : If the frame to be transmitted is 1101011011 and the CRC polynomial to be used for generating checksum is x 4+ x + 1, then what is the transmitted frame? a. 11010110111011 b. 11010110111101 c. 11010110111110 d. 11010110111001

Last Answer : c. 11010110111110

Let G(x) be the generator polynomial used for CRC checking. What is the condition that should be satisfied by G(x) to detect odd number of bits in error? a. G(x) contains more than two terms b. G(x) does not divide 1+x^k, for any k not exceeding the frame length c. 1+x is a factor of G(x) d. G(x) has an odd number of terms

Description : Let G(x) be the generator polynomial used for CRC checking. What is the condition that should be satisfied by G(x) to detect odd number of bits in error? a. G(x) contains more than two terms b. G(x) does ... exceeding the frame length c. 1+x is a factor of G(x) d. G(x) has an odd number of terms

Last Answer : c. 1+x is a factor of G(x)

What do you mean by numbering and addressing? Draw the ISDN address structure and explain how the addressing works?

Description : What do you mean by numbering and addressing? Draw the ISDN address structure and explain how the addressing works?

Last Answer :  Numbering and Addressing: In telephone and data networks, the end equipments are more often single units than multiple devices units like PABX or LAN. Historically, a telephone, a computer, or a ... as reference point may also be addressed by using direct inward dialing (DID) feature.  

Explain the process of inter-register signalling.

Description : Explain the process of inter-register signalling.

Last Answer : Registers are used in common control exchanges to store and analyze routing data. They are provided on a common basis is a single register provides routing data for a number of speech circuits. Once a call ... it is released and the originating register signals to the next register.

Draw a centralized SPC organization and explain how it works under load sharing operation.

Description : Draw a centralized SPC organization and explain how it works under load sharing operation.

Last Answer : In centralized control, all the control equipment is replaced by a single processor which must be quite powerful. It must be capable of processing 10 to 100 calls per second, depending on the ... both the processors are active simultaneously and share the load and the resources dynamically.  

Explain FDM and show how CCITT standards help in building the base band?

Description : Explain FDM and show how CCITT standards help in building the base band?

Last Answer : Frequency Division Multiplexing: It is the process of combining several information channels by shifting their signals to different frequency groups within the spectrum so that they can be transmitted simultaneously ... of 24 channels were assembled together in one stage of modulation.     

What are the different ways of designing 100 line exchange using uni selector and two motion selectors? Show at least three variations. Which is the best option?

Description : What are the different ways of designing 100 line exchange using uni selector and two motion selectors? Show at least three variations. Which is the best option?

Last Answer : Here three different designing methods for 100 line exchange are discussed: Design 1: Here, Strowger switching system is designed using one two-motion selector for each subscriber. A ... only under certain specific traffic conditions and generally lead to higher blocking probabilities.  

How numbering plan is achieved in modern telephony? Give the structure with example.

Description : How numbering plan is achieved in modern telephony? Give the structure with example.

Last Answer :  The objective of numbering plan is to uniquely identify every subscriber connected to a telecommunication network. A numbering plan may be open, semiopen or closed. An open-numbering plan permits wide ... known as the subscriber number which is the number listed in the telephone directory.   

How does a touch tone receiver differs from pulsed dial receiver? Explain with schematic.

Description : How does a touch tone receiver differs from pulsed dial receiver? Explain with schematic.

Last Answer : Pulse dialing: 1. Generated through make and break contact. 2. DC Current pulse is generated. 3. Each number is separated by a short pause to prevent overlapping. 4. Codes ... dialing pulse is not misinterpreted as the phone being returned to its on-hook (idle) condition.   

Discuss different Routing plan adopted in a Telephone network.

Description : Discuss different Routing plan adopted in a Telephone network.

Last Answer : Hierarchical networks are capable of handing heavy traffic where required, and at the same time use minimal number of trunk groups. Three methods are used for deciding on the route for a ... selection methods can be implemented. Computer based routing is a standard feature in data networks.  

Discuss briefly subscriber loop system. Give some technical specification for subscriber lines.

Description : Discuss briefly subscriber loop system. Give some technical specification for subscriber lines.

Last Answer : Subscriber Loop System: Every subscriber in a telephone network is connected generally to the nearest switching office by means of a dedicated pair of wires. Subscriber loop refers to this pair of wires. It is un ... 1. Diameter of wire 2. D.C. resistance per Km 3. Attenuation per Km 

What is Traffic Engineering? Define the term busy hour, traffic intensity and grade of service.

Description : What is Traffic Engineering? Define the term busy hour, traffic intensity and grade of service.

Last Answer : Traffic engineering provides the basis for analysis and design of telecommunication network to carry a given traffic at a particular loss probability. It provides a means to determine the quantum of common equipments ... A0  Where  A= offered traffic  A0 = carried traffic  A-A0= lost traffic    

Explain topology method used in LAN technology in detail.

Description : Explain topology method used in LAN technology in detail.

Last Answer : LAN Topologies: Network topology is a physical schematic which shows interconnection of the many users. There are four basic topologies as under: (i) Direct Connection or one to all topology ( ... temporarily, inserting the new node and then reestablishing the complete ring path.

List all seven layer of OSI model and describe function of application layer.

Description : List all seven layer of OSI model and describe function of application layer.

Last Answer : The layers of OSI model are as follows:  (1) The Physical Layer: This defines an interface in terms of the connections, voltage levels and data rate, in order for signals to ... with the applications programs needed. Examples include electronic mail, word processing, banking transactions, etc.  

Find the total number of link L having five entities? Explain differences between folded and non-folded network.

Description : Find the total number of link L having five entities? Explain differences between folded and non-folded network.

Last Answer : Folded network: When all the inlets/outlets are connected to the subscriber lines, the logical connection appears as shown in Fig. In this case, the output lines are folded back to the input ... non-folded network to be non-blocking, the network should support N simultaneous switching paths.  

Explain simple telephone communication system with circuit and equation of current flow in microphone?

Description : Explain simple telephone communication system with circuit and equation of current flow in microphone?

Last Answer : Simple Telephone Communication: In the simplest form of a telephone circuit, there is one way communication involving two entities, one receiving (listening) and the other transmitting (talking).   ... carrier wave in AM system. The quantity m is equivalent to the modulation index in AM. 

Explain crossbar exchange, with all call processing steps and diagrams

Description : Explain crossbar exchange, with all call processing steps and diagrams

Last Answer : The basic idea of crossbar switching is to provide a matrix of n x m sets of contacts with only n + m activators or less to select one of the n x m sets of contacts. This form of ... a contact is established at the cross point 6 such that the subscriber B is connected to the subscriber C.