Sewer pipes are made of
(A) Earthen ware
(B) Stone ware
(C) Refractory clay
(D) All the above

1 Answer

Answer :

Answer: Option B

Related questions

Description : Pick up the correct statement from the following: (A) The baked earth is called terra-cotta (B) The articles prepared from clay which is burnt at low temperature and cooled down slowly, are called ... clays which as mixed with stone and crushed pottery, are called stone ware (D) All the above

Last Answer : Answer: Option D

Description : Lead caulked joints are used for laying A. Stone ware pipes B. Earthenware pipes C. C.I. pipes D. G.I. pipes

Last Answer : ANS: B

Description : Stone ware pipes are A. Highly resistant to sulphide corrosion B. Highly impervious C. Hydraulically efficient because of their smooth interior surface D. Especially suited to pressure pipes

Last Answer : ANS: D

Description : Runoff is the quantity of water which flows (A) In sewer pipes (B) Due to leakage in pipes (C) In rivers (D) None of these

Last Answer : (C) In rivers

Description : The valves provided at low points of pipes to drain off water quickly under gravity, are called (A) Blow off valves (B) Drain valves (C) Sewer valves (D) All the above

Last Answer : (D) All the above

Description : Which one of the following resists hydrogen sulphide corrosion? A. R.C.C. B. Glazed stone wares C. Asbestos cement D. Glazed ware

Last Answer : ANS: D

Description : 221 For non-scouring velocity 5 m/sec, the type of sewers generally preferred to, is A. Cast iron sewers B. Cement concrete sewers C. Glazed bricks sewers D. Stone ware sewers

Last Answer : ANS: C

Description : In sewers the highest non-scouring velocity is achieved in A. Glazed bricks sewers B. Cast iron sewers C. Cement concrete sewers D. Stone ware sewers

Last Answer : ANS: A

Description : The stone ware sewers A. Are used for carrying sewage and drainage from houses B. Are manufactured from clays and shale C. After casting are dried and burnt at temperature 150°C, 700°C and 1200°C D. All the above

Last Answer : ANS: D

Description : Pick up the incorrect size of stone ware sewers A. 52.5 cm B. 67.5 cm C. 82.5 cm D. None of these

Last Answer : ANS: D

Description : Fire clay is __________ refractory material. (A) A basic (B) An acidic (C) A neutral (D) Not a

Last Answer : (B) An acidic

Description : how jasmine root system will effect sewer pipes

Last Answer : Its advisible not to plant them near sewer pipes as they are quite extensive and the root system will always seek the nearest source of moisture, regardless of the form.

Description : Aerobic activity is maximum A. In freshly produced sewage B. At sewer pipes C. In sewer treatment plants D. None of these

Last Answer : ANS: A

Description : Sewer pipes need be checked for A. Minimum flow B. Maximum flow C. Both A. and B. D. None of these

Last Answer : ANS: C

Description : In R.C. sewer pipes, the percentage longitudinal reinforcement to the cross-sectional area of concrete is kept A. 10.0 B. 5.0 C. 2.0 D. 0.25

Last Answer : ANS: D

Description : Which one of the following tests is used for testing sewer pipes? A. Water test B. Ball test C. Mirror test D. All of these

Last Answer : ANS: D

Description : The porosity of sediments in sewer pipes, is usually taken as A. 0.010 B. 0.011 C. 0.012 D. 0.013

Last Answer : ANS: D

Description : You are asked to design sewer pipes of diameters 0.4 m to 0.9 m at maximum flow, you will assume the sewer flow running at A. Full depth B. Half full C. Two third full D. Three fourth full

Last Answer : ANS: B

Description : Pick up the in-correct statement from the following: A. Manholes are provided in sewer pipes at suitable intervals B. Catch basins are generally provided in sewers for carrying drainage discharge C. Inlets are generally provided in all sewers D. None of these

Last Answer : ANS: C

Description : Hydraulic mean radius is A. Mean radius of sewer B. Difference in heads between two points in circular pipes C. Mean of radii in a pipe line of varying cross -sections D. Cross-sectional area/wetted perimeter

Last Answer : ANS: D

Description : ¾th or ¼th extra space is left in sewer pipes at maximum discharge for A. Low estimates of the average and maximum flows B. Large scale infiltration of storm water C. Unexpected increase in population D. All the above

Last Answer : ANS: D

Description : Sewer pipes are designed for maximum discharge with 25% to 33% vacant cross-sectional area for A. Unexpected large scale infiltration of stream water B. Unexpected increase in the population C. Under estimates of maximum and average flows D. All of the above

Last Answer : ANS: D

Description : The sewer pipes A. Carry sewage as gravity conduits B. Are designed for generating self-cleansing velocities at different discharge C. Should resist the wear and tear caused due to abrasion D. All the above

Last Answer : ANS: D

Description : Pick up the correct statement from the following: A. The water supply pipes carry pure water free from solid particles B. The water supply pipes get clogged if flow velocity is less than self ... carried up and down the hills and valleys D. The sewer pipes are generally laid along level hills

Last Answer : ANS: A

Description : Pick up the correct statement from the following: A. The sewer pipes of sizes less than 0.4 m diameter are designed as running full at maximum discharge B. The sewer pipes of sizes greater than 0.4 m ... discharge C. The minimum design velocity of sewer pipes is taken as 0.8 m/sec D. All the above

Last Answer : ANS: D

Description : Pick up the incorrect statement from the following: (A) Porosity of clay sand soil is 45% (B) Porosity of pure sand is 35% (C) Porosity of sand stone is up to 15% (D) None of these

Last Answer : (D) None of these

Description : Ordinary Portland cement is manufactured from (A) Lime stone and clay (B) Gypsum and lime (C) Pozzolana (D) Lime, pozzolana and clay

Last Answer : Answer: Option B

Description : If the ore impurities is (A) Clay, lime stone is used as flux (B) Lime stone, clay is used as flux (C) Quartz, lime stone and argillaceous iron ores are used as flux (D) All the above

Last Answer : Answer: Option D

Description : Hydraulic lime is obtained by (A) Burning of lime stone (B) Burning of kankar (C) Adding water to quick lime (D) Calcination of pure clay

Last Answer : Answer: Option B

Description : Pick up the correct statement from the following: (A) Quick lime is obtained by burning pure lime stone (B) Hydraulic lime is obtained by burning lime stone containing clay 5% to 30% (C) Poor lime is obtained by burning lime stone containing impurities more than 5% (D) All the above

Last Answer : Answer: Option D

Description : If the iron ore contains clay as an impurity, the flux added during calcination, is (A) Clay (B) Lime stone (C) Argillaceous iron ore (D) All the above

Last Answer : Answer: Option B

Description : The earthen embankments constructed parallel to the river banks at some suitable distance for flood control, are known as (A) Floods walls (B) Dikes (C) Levees (D) Both (b) and (c)

Last Answer : Answer: Option D

Description : Seepage through foundation in an earthen dam is controlled by providing (A) Rock toe (B) Horizontal blanket (C) Impervious cut off (D) Chimney drain

Last Answer : Answer: Option C

Description : For the upstream face of an earthen dam, the most adverse condition for stability of slope is (A) Sudden drawdown (B) Steady seepage (C) During construction (D) Sloughing of slope

Last Answer : Answer: Option A

Description : Seepage through embankments in an earthen dam is controlled by (A) Drainage filters (B) Relief wells (C) Drain trenches (D) Provision of downstream berms

Last Answer : Answer: Option C

Description : Which of the following spillways is least suitable for an earthen dam? (A) Ogee spillway (B) Chute spillway (C) Side channel spillway (D) Shaft spillway

Last Answer : Answer: Option A

Description : As compared to gravity dams, earthen dams (A) Are costlier (B) Are less susceptible to failure (C) Require sound rock foundations (D) Require less skilled labour

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) The cross fall of the shoulder should be at least 0.5% steeper than camber (B) On super-elevated sections, the shoulders should be provided a ... equal to camber (C) Earthen roads in general are provided steepest cross-fall (D) All the above

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) A harbour without any port complex, is called a refuge harbour (B) A harbour used for fishery, is called fishery harbour (C) The ... commercial harbour consists of an administrative block, customs clearance and ware-houses (D) All the above

Last Answer : (D) All the above

Description : An ideal ware house, is provided (A) Water proof masonry walls (B) Water proof roof (C) Few windows which remain generally closed (D) All the above

Last Answer : Answer: Option D

Description : The internal dimensions of a ware house are 15 m × 5.6 m, and the maximum height of piles is 2.70 m, the maximum number of bags to be stored in two piles, are (A) 1500 bags (B) 2000 bags (C) 2500 bags (D) 3000 bags

Last Answer : Answer: Option D

Description : Ware house pack' of cement means (A) Full capacity of the ware house (B) Pressure exertion of the bags of upper layers (C) Pressure compaction of the bags on lower layers (D) Packing the ware house

Last Answer : Answer: Option C

Description : Is the silver ware made by Simon L and George H Rogers Company safe to eat off of?

Last Answer : Need answer

Description : From where do we find the pieces of baked clay and burnt bone along with stone tools? -History

Last Answer : We find the pieces of baked clay and burnt bones from Chesowanja, Kenya and Swartkrans. These tools are dated between 1.4 and 1 mya.

Description : Which mineral is mostly found in northern and western mountains of Pakistan? A. Chromite B. Lime-stone C. China Clay D. Gypsum

Last Answer : ANSWER: B

Description : Hyderabad has deposits of _____. A. Chromite B. Gypsum C. Fire Clay D. Lime-stone

Last Answer : ANSWER: D

Description : Which mineral is used in the making of high speed machines? A. Rock Salt B. Chromite C. China Clay D. Lunic Stone

Last Answer : ANSWER: D

Description : Which of the following minerals is found in warcha, Bahadar Kail, Khark, Mirpur and Lasbela? A. Rock Salt B. Chromite C. Luni Stone D. China Clay

Last Answer : ANSWER: A

Description : Which mineral is mostly found in northern and western mountains of Pakistan? A. Chromite B. Lime-stone C. China Clay D. Gypsum

Last Answer : ANSWER: B

Description : Which mineral is used in the making of high speed machines? A. Rock Salt B. Chromite C. China Clay D. Lunic Stone

Last Answer : ANSWER: D