In a flux meter, the controlling torque is _____.

In a flux meter, the controlling torque is _____.
by

1 Answer

Answer :

In a flux meter, the controlling torque is not provided at all.

by

Related questions

For controlling the vibration of the disc of ac energy meter, damping torque is produced by

Description : For controlling the vibration of the disc of ac energy meter, damping torque is produced by

Last Answer : For controlling the vibration of the disc of ac energy meter, damping torque is produced by Eddy current

Describe spring control method of producing controlling torque in measuring instrument. Write any two properties required for spring material.

Description : Describe spring control method of producing controlling torque in measuring instrument. Write any two properties required for spring material.

Last Answer : A)Spring control method: As shown in the figure, the inner ends of the both springs are attahced to the spindle, while outer end of upper spring is attached to the lever and outer ... of spring material: 1.Non Magnetic material 2.Low specific resistance 3.Low temperature coefficient of resistance

State the function of controlling torque in electrical measuring instrument.

Description : State the function of controlling torque in electrical measuring instrument.

Last Answer : Function of controlling torque  1. The function is to opposes the deflection force and increases with the increase in the deflection of the moving system, to limit its movement. 2. and brought ... set a position where the two opposing forces i.e. deflection and controlling forces are equal. 

State the function of controlling torque. Write two types of it.

Description : State the function of controlling torque. Write two types of it.

Last Answer : Function of Controlling Torque:  To restrict the motion of pointer / spindle and stop the pointer at the relevant position to get correct reading.  To bring back pointer to zero ... measurement is removed.  Types of Controlling Torque: 1. Spring control method 2.Gravity control method 

Controlling torque in PMMC

Description : Controlling torque in PMMC

Last Answer : spring action

When both deflecting and controlling torque act, the pointer of an indicating instrument comes to

Description : When both deflecting and controlling torque act, the pointer of an indicating instrument comes to

Last Answer : rest

As the deflection of the moving system increases, the controlling torque in an indicating instrument.

Description : As the deflection of the moving system increases, the controlling torque in an indicating instrument.

Last Answer : increases

In a meggar controlling torque is provided by?

Last Answer : In a meggar controlling torque is provided by coil.

In a portable instrument, the controlling torque is provided by?

Last Answer : In a portable instrument, the controlling torque is provided by spring.

iv) A rectangular coil free to rotate is placed in uniform magnetic field with its plane parallel to the magnetic lines of force. Then the coil willa) rotate to maximize the magnetic flux through its plane. b)rotate to minimize the magnetic flux through its plane.c) not experience any torque since the magnetic flux through its plane is zero.d) experience the constant torque equal to NBIA

Description : iv) A rectangular coil free to rotate is placed in uniform magnetic field with its plane parallel to the magnetic lines of force. Then the coil willa) rotate to maximize the magnetic flux through ... since the magnetic flux through its plane is zero.d) experience the constant torque equal to NBIA

Last Answer : iv) A rectangular coil free to rotate is placed in uniform magnetic field with its plane parallel ... d) experience the constant torque equal to NBIA

Find the torque of a loop with magnetic moment 12.5 and magnetic flux density 7.65 units is a) 95.625 b) 65.925 c) 56.525 d) 65.235

Description : Find the torque of a loop with magnetic moment 12.5 and magnetic flux density 7.65 units is a) 95.625 b) 65.925 c) 56.525 d) 65.235

Last Answer : a) 95.625

Consider the conductor to be a coil of turns 60 and the flux density to be 13.5 units, current 0.12A and area 16units. The torque will be a) 1555.2 b) 1222.5 c) 525.1 d) 255.6

Description : Consider the conductor to be a coil of turns 60 and the flux density to be 13.5 units, current 0.12A and area 16units. The torque will be a) 1555.2 b) 1222.5 c) 525.1 d) 255.6

Last Answer : a) 1555.2

The torque on a conductor with flux density 23 units, current 1.6A and area 6.75 units will be a) 248.4 b) 192.6 c) 175.4 d) 256.9

Description : The torque on a conductor with flux density 23 units, current 1.6A and area 6.75 units will be a) 248.4 b) 192.6 c) 175.4 d) 256.9

Last Answer : a) 248.4

The introduction of interpoles in between the main pole improves the performance of d.c. machines, because (A) The interpole produces additional flux to augment the developed torque. (B) The flux waveform is improved with reduction in harmonics. (C) The inequality of air flux on the top and bottom halves of armature is removed. (D) A counter e.m.f. is induced in the coil undergoing commutation.

Description : The introduction of interpoles in between the main pole improves the performance of d.c. machines, because (A) The interpole produces additional flux to augment the developed torque. (B) The flux waveform is ... armature is removed. (D) A counter e.m.f. is induced in the coil undergoing commutation.

Last Answer : Ans: D Counter e.m.f is produced, it neutralizes the reactive emf.

A DC Motor develops a torque of 150 N-m. A 10 percent reduction in the field flux causes a 50 percent

Description :  A DC Motor develops a torque of 150 N-m. A 10 percent reduction in the field flux causes a 50 percent increase in armature current. The new value of torque is: A) 102.5 N-m B) 202.5 N-m C) 172.5 N-m D) 232.5 N-m

Last Answer : T1=KIf,T2=K1.5I*0.9f T1=150Nm.  T2=T1*1.5*0.9=150*1.35=202.5Nm

In an induction motor if the flux density is reduced to one-half, of its normal value then the torque will

Description : In an induction motor if the flux density is reduced to one-half, of its normal value then the torque will  (1) reduce to one-half (2) reduce to one-fourth (3) remain unchanged (4) increase four times

Last Answer : In an induction motor if the flux density is reduced.to one-half, of its normal value then the torque will reduce to one-fourth

A moving-coil permanent-magnet instrument can be used as flux-meter?

Last Answer : A moving-coil permanent-magnet instrument can be used as flux-meter by eliminating the control springs.

The draft of a trailed type implement can be measured using a) Brake dynamometer b) Torque meter c) Tension dynamometer d) Dial gauge

Description : The draft of a trailed type implement can be measured using a) Brake dynamometer b) Torque meter c) Tension dynamometer d) Dial gauge Ans. c

Last Answer : Ans. c

The meter which does not have any component in it to provide control torque is

Description : The meter which does not have any component in it to provide control torque is (A) Electrodynamometer for current measurement (B) Electrodynamometer for voltage measurement (C) Electrodynamometer for power measurement. (D) Electrodynamometer for power factor measurement.

Last Answer : The meter which does not have any component in it to provide control torque is Electrodynamometer for power factor measurement.

Damping torque used in energy meter is : -

Description :  Damping torque used in energy meter is : - a) Electrostatic b) Electro magnetic c) Eddy Current d) None

Last Answer : Damping torque used in energy meter is : - Eddy Current

In a moving iron meter, the deflecting torque is proportional to

Last Answer : In a moving iron meter, the deflecting torque is proportional to Square of the current through the coil.

In an energy meter braking torque is produced to

Last Answer : In an energy meter braking torque is produced to maintain steady speed and equal to driving torque

The series magnet of a single phase Energy meter consists of coil of _____.

Last Answer : The series magnet of a single phase Energy meter consists of coil of thick wire of few turns.

The three steps of project management are _____. a. controlling the project, directing the project, and creating the work plan b. creating the work plan, staffing the project, and controlling and directing the project c. directing the project, creating the work plan, and naming the tasks d. naming the tasks, creating the work plan, and completing the deliverables e. setting the start date, estimating the time, and reading the actual time

Description : The three steps of project management are _____. a. controlling the project, directing the project, and creating the work plan  b. creating the work plan, staffing the project, and controlling ... the deliverables  e. setting the start date, estimating the time, and reading the actual time

Last Answer : b. creating the work plan, staffing the project, and controlling and directing the  project

The most significant challenge to project managers is _____. a. lack of project management training b. no one really understands how to manage a complex systems development project c. the lack of tools that can assist in controlling project progress d. unrealistic schedule demands by project sponsors

Description : The most significant challenge to project managers is _____.  a. lack of project management training  b. no one really understands how to manage a complex systems development project  ... tools that can assist in controlling project progress  d. unrealistic schedule demands by project sponsors

Last Answer : d. unrealistic schedule demands by project sponsors

_____ is the process of planning and controlling the development of a system within a specified time frame at a minimum cost with the right functionality. a. Project management b. Symantic timeline c. Task identification d. Time estimation e. Work plan

Description : _____ is the process of planning and controlling the development of a system within a  specified time frame at a minimum cost with the right functionality.  a. Project management  b. Symantic timeline  c. Task identification  d. Time estimation  e. Work plan

Last Answer : a. Project management

Implementing management measures to correct any variances, which may have occurred _____. a] Recording c] Checking b] Controlling. d] Allocating

Description : Implementing management measures to correct any variances, which may have occurred _____. a] Recording c] Checking b] Controlling. d] Allocating

Last Answer : controlling

The meter installed in our homes measure electricity in _____. A. KWh B. WKh C. Hkw D. Khw

Description : The meter installed in our homes measure electricity in _____. A. KWh B. WKh C. Hkw D. Khw

Last Answer : ANSWER: A

The speed of sound is _____. A. 300 meter per second B. 315 meter per second C. 340 meter per second D. 362 meter per second

Description : The speed of sound is _____. A. 300 meter per second B. 315 meter per second C. 340 meter per second D. 362 meter per second

Last Answer : ANSWER: C

The speed of sound is _____. A. 300 meter per second B. 315 meter per second C. 340 meter per second D. 362 meter per second

Description : The speed of sound is _____. A. 300 meter per second B. 315 meter per second C. 340 meter per second D. 362 meter per second

Last Answer : ANSWER: C

The meter installed in our homes measure electricity in _____. A. KWh B. WKh C. Hkw D. Khw

Description : The meter installed in our homes measure electricity in _____. A. KWh B. WKh C. Hkw D. Khw

Last Answer : ANSWER: A

The meter installed in our homes measure electricity in _____. A. KWh B. WKh C. Hkw D. Khw

Description : The meter installed in our homes measure electricity in _____. A. KWh B. WKh C. Hkw D. Khw

Last Answer : ANSWER: A

One indirect way to determine microbial growth is using a _____. a. UV light b. Spectrophotometer c. Light meter d. Radioactive counter

Description : One indirect way to determine microbial growth is using a _____. a. UV light b. Spectrophotometer c. Light meter d. Radioactive counter

Last Answer : b. Spectrophotometer

Answer the following S. No Statement Chose the correct answer OR Fill-in-the-blanks 1 Fyrite measures CO2, O2 and SO2 True/False 2 Ultrasonic Flow Meter uses the principle of____& ____ Fill in the blanks 3 Non Contact Infrared Thermometer cannot measure temperature of objects placed in hazardous places True/False 4 To measure the RPM of a Flywheel, ______ type of RPM meter is used and for a visible shaft-end _______ type of RPM meter is used. Fill in the blanks 5 In a switch yard, _____ instrument is used to identify the loose joints and terminations Fill in the blanks 6 Every Designated Consumer shall have its first energy audit conducted by ________ Energy Auditor within ______ months of

Description :  Answer the following S. No Statement Chose the correct  answer OR Fill-in-the-blanks 1 Fyrite measures CO2, O2 and SO2 True/False 2 Ultrasonic Flow Meter uses the principle of____& ____ Fill in the ... of RPM  meter is used and for a visible shaft-end _______ type of  RPM meter is used.

Last Answer : Sr  No Statement Chose the correct  answer OR Fill-in-the-blanks Solution 1 Fyrite measures CO2, O2 and  SO2 True/False False 2 Ultrasonic Flow Meter uses the  principle of____& ____ ... ]  10 In a gasification system the  reduction zone is above the  combustion zone True/False False

Flux density formula

Description : Flux density formula

Last Answer : Flux density formula

Define the following terms: i) Magnetic flux density, ii) Reluctance, iii) Magneto-motive force, iv) Permeance.

Description : Define the following terms: i) Magnetic flux density, ii) Reluctance, iii) Magneto-motive force, iv) Permeance.

Last Answer : (i) Magnetic flux density (B): It is the magnetic flux per unit area measured at right angles to the flux path. (Its unit is weber/m2 or tesla).  (ii) Reluctance: It is the ... flux to set up through it and it is reciprocal of reluctance. Permeance = 1/ Reluctance. Unit: weber/ampere.

Describe the concept of leakage flux, useful flux and fringing with neat diagram.

Description : Describe the concept of leakage flux, useful flux and fringing with neat diagram.

Last Answer : Leakage Flux

Define : i) MMF ii) Reluctance iii) Fringing iv) Leakage flux

Description : Define : i) MMF ii) Reluctance iii) Fringing iv) Leakage flux

Last Answer : i) MMF:  It is the force that drives magnetic flux through magnetic circuit. It is measured in amp-turns.  ii) Reluctance (s) :-  Reluctance is the property of the substance ... through the magnetic circuit, leaks through the air surrounding the core. This flux is called as leakage flux.

Define: (i) Ore (ii) Flux

Description : Define: (i) Ore (ii) Flux 

Last Answer : Ore: The mineral from which the metal is conveniently and economically extracted is known as ore.  Flux: ‘A substance which is used to remove the gangue from ore is called flux’.

A coil of 500 turns is linked with a flux of 25 mwb, when carries a current of 12.5A. Calculate the value of self-inductance.

Description : A coil of 500 turns is linked with a flux of 25 mwb, when carries a current of 12.5A. Calculate the value of self-inductance.

Last Answer : Ans: Self-Inductance: L = NΦ /I = 500 × 25 × 10-3 / 12.5 = 1 H

Define magnetic flux density and state its formula.

Description : Define magnetic flux density and state its formula.

Last Answer : The magnetic flux per unit area is called as magnetic flux density. Magnetic flux density is denoted by B. The formula for magnetic flux density is Weber per metre square or Tesla. Mathematically ... the unit of magnetic flux density is Weber per metre square which is also called as Tesla.

Which of the following is a unit of magnetic flux?

Description : Which of the following is a unit of magnetic flux? A) Weber B) Maxwell C) Both A and B D) None of these

Last Answer : Which of the following is a unit of magnetic flux? A) Weber B) Maxwell C) Both A and B D) None of these

"Electric flux enclosed by a surface surrounding a charge is equal to the amount of charge enclosed." This...

Description : "Electric flux enclosed by a surface surrounding a charge is equal to the amount of charge enclosed." This is the statement of

Last Answer : "Electric flux enclosed by a surface surrounding a charge is equal to the amount of charge enclosed." This is the statement of Gauss's law

Gauss's theorem states that total electric flux Φ emanating from a closed surface is equal to

Description : Gauss's theorem states that total electric flux Φ emanating from a closed surface is equal to (a) Total current density on the surface (b) Total charge enclosed by that surface (c) Total current on the surface (d) Total charge density within the surface

Last Answer : Gauss's theorem states that total electric flux Φ emanating from a closed surface is equal to Total charge enclosed by that surface

The core of a transformer (medium size) uses to provide high flux densities

Description : The core of a transformer (medium size) uses to provide high flux densities (a) diamagnetic (c) ferromagnetic core (b) paramagnetic (d) none of these

Last Answer : The core of transformer is made up colled rolled grain oriented. It is a ferromagnetic material..

The path of the magnetic flux in a transformer has :

Description : The path of the magnetic flux in a transformer has : (A) High reluctance (B) Low resistance (C) High conductivity (D) Low reluctance

Last Answer : low reluctance path

What is the purpose of using flux at the time of soldering?

Description : What is the purpose of using flux at the time of soldering? A. To remove oxidation B. To prevent corrosion C. To promote wet surface D. All of these

Last Answer : What is the purpose of using flux at the time of soldering? A. To remove oxidation B. To prevent corrosion C. To promote wet surface D. All of these

Unit of flux density in magnetic circuits is ______________.

Description : Unit of flux density in magnetic circuits is ______________. A. Tesla B. dB C. Weber D. Hz 

Last Answer : Unit of flux density in magnetic circuits is Weber.

If the cross-sectional area of a magnetic field increases, but the flux remains the same, the flux density:

Description : If the cross-sectional area of a magnetic field increases, but the flux remains the same, the flux density: A. increases B. decreases C. remains the same D. doubles

Last Answer : If the cross-sectional area of a magnetic field increases, but the flux remains the same, the flux density: decreases

Which of the following statements holds for the divergence of electric and magnetic flux densities?

Description : Which of the following statements holds for the divergence of electric and magnetic flux densities?  A) Both are zero B) These are zero for static densities but non zero for time varying densities C) It is zero for electric flux density D) It is zero for magnetic flux density

Last Answer : Which of the following statement holds for the divergence of electric and magnetic flux densities ?  (A) Both are zero (B) These are zero for static densities but non zero for time varying densities. (C) It is zero for the electric flux density (D) It is zero for the magnetic flux density