The meatcentric height of a ship is 0.6 m and the radius of gyration is 4 m. The time of rolling of a ship is (A) 4.1 s (B) 5.2 s (C) 10.4 s (D) 14.1 s

The meatcentric height of a ship is 0.6 m and the radius of gyration is 4 m. The time of rolling of a
ship is
(A) 4.1 s
(B) 5.2 s
(C) 10.4 s
(D) 14.1 s
by

1 Answer

Answer :

Answer: Option C
by

Related questions

The time oscillation of a floating body with increase in meatcentric height will be (A) Same (B) Higher (C) Lower (D) Lower/higher depending on weight of body

Description : The time oscillation of a floating body with increase in meatcentric height will be (A) Same (B) Higher (C) Lower (D) Lower/higher depending on weight of body

Last Answer : Answer: Option C

The meatcentric height is the distance between the (A) Centre of gravity of the floating body and the centre of buoyancy (B) Centre of gravity of the floating body and the metacentre (C) Metacentre and centre of buoyancy (D) Original centre of buoyancy and new centre of buoyancy

Description : The meatcentric height is the distance between the (A) Centre of gravity of the floating body and the centre of buoyancy (B) Centre of gravity of the floating body and the metacentre (C) Metacentre and centre of buoyancy (D) Original centre of buoyancy and new centre of buoyancy

Last Answer : Answer: Option B

A body floats in stable equilibrium (A) When its meatcentric height is zero(B) When the metacentre is above e.g. (C) When its e.g. is below its center of buoyancy (D) Metacentre has nothing to do with position of e.g. for determining stability

Description : A body floats in stable equilibrium (A) When its meatcentric height is zero (B) When the metacentre is above e.g. (C) When its e.g. is below its center of buoyancy (D) Metacentre has nothing to do with position of e.g. for determining stability

Last Answer : Answer: Option B

A 100 kg flywheel having a radius of gyration of 1 m is rotating at 1000 rpm. The angular momentum of the flywheel about its axis of rotation, in kg m2/s is a.1000 b.107 dynes c.10000 d.10470 e.5235

Description : A 100 kg flywheel having a radius of gyration of 1 m is rotating at 1000 rpm. The angular momentum of the flywheel about its axis of rotation, in kg m2/s is a.1000 b.107 dynes c.10000 d.10470 e.5235

Last Answer : d. 10470

Slenderness ratio of a long column, is (A) Area of cross-section divided by radius of gyration (B) Area of cross-section divided by least radius of gyration (C) Radius of gyration divided by area of cross-section (D) Length of column divided by least radius of gyration

Description : Slenderness ratio of a long column, is  (A) Area of cross-section divided by radius of gyration  (B) Area of cross-section divided by least radius of gyration  (C) Radius of gyration divided by area of cross-section  (D) Length of column divided by least radius of gyration 

Last Answer : (D) Length of column divided by least radius of gyration 

The ratio of the effective length of a column and minimum radius of gyration of its cross-sectional area, is known (A) Buckling factor (B) Slenderness ratio (C) Crippling factor (D) None of these

Description : The ratio of the effective length of a column and minimum radius of gyration of its cross-sectional area, is known (A) Buckling factor (B) Slenderness ratio (C) Crippling factor (D) None of these

Last Answer : (B) Slenderness ratio

The radius of gyration of a rectangular section is not proportional to (A) Square root of the moment of inertia (B) Square root of the inverse of the area (C) Square root of the moment of inertia divided by area of the section (D) None of these

Description : The radius of gyration of a rectangular section is not proportional to  (A) Square root of the moment of inertia  (B) Square root of the inverse of the area  (C) Square root of the moment of inertia divided by area of the section  (D) None of these 

Last Answer : (D) None of these 

A flywheel weighs 400 kg and has a radius of gyration of 30 cm about its axis of rotation. It is mounted on a shaft subjected to a moment of 40 kgm. If the flywheel starts from restits speed after 3 seconds wil be a.10.9 rad/sec b.19.0 rad/sec c.51.2 rad/sec d.3.33 rad/sec e.16.35 rad/sec

Description : A flywheel weighs 400 kg and has a radius of gyration of 30 cm about its axis of rotation. It is mounted on a shaft subjected to a moment of 40 kgm. If the flywheel starts from restits speed after 3 seconds wil be a.10.9 rad/sec b.19.0 rad/sec c.51.2 rad/sec d.3.33 rad/sec e.16.35 rad/sec

Last Answer : d. 3.33 rad/sec

The radius of gyration of a solid sphere of radius r is equal to a.0.8 r2 b.0.2 r2 c.0.3 r2 d.0.4 r2 e.0.5 r2

Description : The radius of gyration of a solid sphere of radius r is equal to a.0.8 r2 b.0.2 r2 c.0.3 r2 d.0.4 r2 e.0.5 r2

Last Answer : d. 0.4 r2

Which of the following relations is used to represent theorem of perpendicular axes? (H = Vertical axis, I = Moment of inertia and K = Radius of gyration) a. IPQ = Ixx + AH2 b. IPQ = Ixx + Ak2 c. Izz = Ixx + Iyy d. Izz + Ixx + Iyy = 0

Description : Which of the following relations is used to represent theorem of perpendicular axes? (H = Vertical axis, I = Moment of inertia and K = Radius of gyration) a. IPQ = Ixx + AH2 b. IPQ = Ixx + Ak2 c. Izz = Ixx + Iyy d. Izz + Ixx + Iyy = 0

Last Answer : c. Izz = Ixx + Iyy

A couple applied to a flywheel of mass 5 kg and of radius of gyration 20 cm produces an angular acceleration of 4 radians/sec2. The torque applied in dyne cm is a.8 x 104 b.8 x 106 c.8 x 107 d.8 x 108 e.8 x 1010

Description : A couple applied to a flywheel of mass 5 kg and of radius of gyration 20 cm produces an angular acceleration of 4 radians/sec2. The torque applied in dyne cm is a.8 x 104 b.8 x 106 c.8 x 107 d.8 x 108 e.8 x 1010

Last Answer : b. 8 x 106

The radius of Gyration (k) for Rim Type Flywheel having radius ‘r’ is given by 1. k = 2r 2. k = r/2 3. k = r 4. k = r/3

Description : The radius of Gyration (k) for Rim Type Flywheel having radius ‘r’ is given by 1. k = 2r 2. k = r/2 3. k = r 4. k = r/3

Last Answer : 3. k = r

Increasing which of the following factor would result in increase of free torsional vibration? A. Radius of gyration B. Mass moment of inertia C. Polar moment of inertia D. Length

Description : Increasing which of the following factor would result in increase of free torsional vibration? A. Radius of gyration B. Mass moment of inertia C. Polar moment of inertia D. Length

Last Answer : C. Polar moment of inertia

f radius of gyration increases then the torsional free vibration increases. a) True b) False

Description : f radius of gyration increases then the torsional free vibration increases. a) True b) False

Last Answer : b) False

Increasing which of the following factor would result in increase of free torsional vibration? a) Radius of gyration b) Mass moment of inertiac) Polar moment of inertia d) Length

Description : Increasing which of the following factor would result in increase of free torsional vibration? a) Radius of gyration b) Mass moment of inertiac) Polar moment of inertia d) Length

Last Answer : c) Polar moment of inertia

A column is said to be a short column, when (a) its length is very small (b) its cross-sectional area is small (c) the ratio of its length to the least radhis of gyration is less than 80 (d) the ratio of its length to the least radius of gyration is more than 80

Description : A column is said to be a short column, when (a) its length is very small (b) its cross-sectional area is small (c) the ratio of its length to the least radhis of gyration is less than 80 (d) the ratio of its length to the least radius of gyration is more than 80

Last Answer : (c) the ratio of its length to the least radhis of gyration is less than 80

The ratio of the effective length of a column and minimum radius of gyration of its cross sectionalarea, is known (a) Buckling factor (b) Slenderness ratio (c) Crippling factor (d) None of these

Description : The ratio of the effective length of a column and minimum radius of gyration of its cross sectionalarea, is known (a) Buckling factor (b) Slenderness ratio (c) Crippling factor (d) None of these

Last Answer : (b) Slenderness ratio

Compression members always tend to buckle in the direction of (a) Vertical axis (b) Horizontal axis (c) Minimum cross-section (d) Least radius of gyration

Description : Compression members always tend to buckle in the direction of (a) Vertical axis (b) Horizontal axis (c) Minimum cross-section (d) Least radius of gyration

Last Answer : (d) Least radius of gyration

The slenderness ratio is the ratio of (a) Length of column to least radius of gyration (b) Moment of inertia to area of cross-section (c) Area of cross-section to moment of inertia (d) Least radius of gyration to length of the column

Description : The slenderness ratio is the ratio of (a) Length of column to least radius of gyration (b) Moment of inertia to area of cross-section (c) Area of cross-section to moment of inertia (d) Least radius of gyration to length of the column

Last Answer : (a) Length of column to least radius of gyration

What is the product of sectional modulus and allowable bending stress called as? a. Moment of inertia b. Moment of rigidity c. Moment of resistance d. Radius of gyration

Description : What is the product of sectional modulus and allowable bending stress called as? a. Moment of inertia b. Moment of rigidity c. Moment of resistance d. Radius of gyration

Last Answer : c. Moment of resistance

Define: (i) Moment of Inertia (ii) Radius of Gyration

Description : Define: (i) Moment of Inertia (ii) Radius of Gyration

Last Answer : i) Moment of Inertia: Moment of Inertia of a body about any axis is equal to the product of the area of the body and square of the distance of its centroid from that axis.  OR  Moment of ... at which the entire area is assumed to be concentrated without changing the M. I. about the given axis. 

Define ‘radius of gyration’ and state its application. Calculate radius of gyration for circular lamina of diameter 500mm.

Description : Define ‘radius of gyration’ and state its application. Calculate radius of gyration for circular lamina of diameter 500mm.

Last Answer : Data: d = 500mm Calculate: K Radius of gyration (K): The radius of gyration of a given area about any axis is the distance from the given axis at which the area is assumed to be ... Application: It is used in Euler's formula to determine buckling load on long column. 

Along with the expression define radius of gyration and sectional modulus.

Description : Along with the expression define radius of gyration and sectional modulus.

Last Answer : Radius of gyration (K): The radius of gyration of a given area about any axis is the distance from the given axis at which the area is assumed to be concentrated without changing the MI about the given ... It is the ratio of moment of inertia to the distance of extreme fiber from neutral axis.

The unit of measurement is per quintal for the following: (A) Collapsible gates with rails (B) Rolling shutters (C) Expanded metal wire netting (D) M.S. reinforcement of R.C.C. works

Description : The unit of measurement is per quintal for the following: (A) Collapsible gates with rails (B) Rolling shutters (C) Expanded metal wire netting (D) M.S. reinforcement of R.C.C. works

Last Answer : (D) M.S. reinforcement of R.C.C. works

A portion of an embankment having a uniform up-gradient 1 in 500 is circular with radius 1000 m of the centre line. It subtends 180° at the centre. If the height of the bank is 1 m at the lower end, and side slopes 2:1, the earth work involved. (A) 26,000 m3 (B) 26,500 m3 (C) 27,000 m3 (D) 27,500 m

Description : A portion of an embankment having a uniform up-gradient 1 in 500 is circular with radius 1000 m of the centre line. It subtends 180° at the centre. If the height of the bank is 1 m at the lower end, and side slopes 2 ... earth work involved. (A) 26,000 m3 (B) 26,500 m3 (C) 27,000 m3 (D) 27,500 m

Last Answer : (D) 27,500 m3

In case of a hair pin bend of a highway, (A) Minimum radius of inner curve is 14 m (B) Minimum radius of transition is 15 m (C) Circular compound curve may be provided (D) All the above

Description : In case of a hair pin bend of a highway, (A) Minimum radius of inner curve is 14 m (B) Minimum radius of transition is 15 m (C) Circular compound curve may be provided (D) All the above

Last Answer : Answer: Option D

A thick wire of radius `r=5 mm` carries a steady current `I=10 A`. An electron leaves its surface perpendicularly with velocity `v_(0)=10^(6) m//s`. F

Description : A thick wire of radius `r=5 mm` carries a steady current `I=10 A`. An electron leaves its surface perpendicularly with velocity `v_(0)=10^(6) m//s`. F

Last Answer : A thick wire of radius `r=5 mm` carries a steady current `I=10 A`. An electron leaves its ... from the surface of the wire before it turns back.

Curved surface area of a cone is 308 cm2 and its slant height is 14 cm. Find (i) radius of the base -Maths 9th

Description : Curved surface area of a cone is 308 cm2 and its slant height is 14 cm. Find (i) radius of the base -Maths 9th

Last Answer : Slant height of cone, l = 14 cm Let the radius of the cone be r. (i) We know, CSA of cone = πrl Given: Curved surface area of a cone is 308 cm2 (308 ) = (22/7) r 14 308 = 44 r r = 308 ... Total surface area of cone = 308+(22/7) 72 = 308+154 Therefore, the total surface area of the cone is 462 cm2.

A conical tent is 10 m high and the radius of its base is 24 m. Find (i) slant height of the tent. -Maths 9th

Description : A conical tent is 10 m high and the radius of its base is 24 m. Find (i) slant height of the tent. -Maths 9th

Last Answer : : Ncert solutions class 9 chapter 13-5 Let ABC be a conical tent Height of conical tent, h = 10 m Radius of conical tent, r = 24m Let the slant height of the tent be l. (i) In right triangle ... (13728/7) 70 = Rs 137280 Therefore, the cost of the canvas required to make such a tent is Rs 137280.

If h and h1 are the heights of a light house and the observer in a ship in metres above M S L then the horizontal distance from the ship to the light house in kilometres is (A) h + h1) (B) h - h1) (C) h × h1) (D) 3.86 h + h1)

Description : If h and h1 are the heights of a light house and the observer in a ship in metres above M S L then the horizontal distance from the ship to the light house in kilometres is (A) h + h1) (B) h - h1) (C) h × h1) (D) 3.86 h + h1)

Last Answer : (A) h + h1)

Extra widening required at a horizontal curve on a single lane hill road of radius 80 m for a design speed of 50 km ph and for a vehicle with wheel base 6.0 m is (A) 0.225 m (B) 0.589 m (C) 1.250 m (D) None of these

Description : Extra widening required at a horizontal curve on a single lane hill road of radius 80 m for a design speed of 50 km ph and for a vehicle with wheel base 6.0 m is (A) 0.225 m (B) 0.589 m (C) 1.250 m (D) None of these

Last Answer : Answer: Option B

The total value of extra widening required at a horizontal curve on a two lane hill road of radius 42 m for a design speed of 50 kmph and for vehicles with wheel base 6 m, is (A) 0.500 m (B) 0.589 m (C) 1.089 m (D) 0.089 m

Description : The total value of extra widening required at a horizontal curve on a two lane hill road of radius 42 m for a design speed of 50 kmph and for vehicles with wheel base 6 m, is (A) 0.500 m (B) 0.589 m (C) 1.089 m (D) 0.089 m

Last Answer : Answer: Option C

A single rolling load of 8 kN rolls along a girder of 15 m span. The absolute maximum bending moment will be (A) 8 kN.m (B) 15 kN.m (C) 30 kN.m (D) 60 kN.m

Description : A single rolling load of 8 kN rolls along a girder of 15 m span. The absolute maximum bending moment will be (A) 8 kN.m (B) 15 kN.m (C) 30 kN.m (D) 60 kN.m

Last Answer : (C) 30 kN.m

The normal road width of National and State highways (A) Is kept 45 m (B) In plain and rolling terrain built-up area, is 30 m (C) In mountainous built-up area is 20 m (D) All the above

Description : The normal road width of National and State highways (A) Is kept 45 m (B) In plain and rolling terrain built-up area, is 30 m (C) In mountainous built-up area is 20 m (D) All the above

Last Answer : Answer: Option D

The item of steel work which is measured in sq.m, is (A) Collapsible gates (B) Rolling shutters (C) Ventilators and glazing (D) All the above

Description : The item of steel work which is measured in sq.m, is (A) Collapsible gates (B) Rolling shutters (C) Ventilators and glazing (D) All the above

Last Answer : (D) All the above

what- how far does a point on a rolling pin travel after one complete revolution if the rolling pin has a radius of 3.8 centimeters?

Description : what- how far does a point on a rolling pin travel after one complete revolution if the rolling pin has a radius of 3.8 centimeters?

Last Answer : about 23.9

A ship whose hull length is 100 m is to travel at 10 m/sec. For dynamic similarity, at what velocity should a 1:25 model be towed through water? (A) 10 m/sec (B) 25 m/sec (C) 2 m/sec (D) 50 m/sec

Description : A ship whose hull length is 100 m is to travel at 10 m/sec. For dynamic similarity, at what velocity should a 1:25 model be towed through water? (A) 10 m/sec (B) 25 m/sec (C) 2 m/sec (D) 50 m/sec

Last Answer : Answer: Option C

Assume that water vaporizes at an absolute pressure of 1.5 m, barometric pressure head is 9.5 m and cavitation coefficient is 0.1 A turbine operates under a head of 40 m. the safe height of the runner above the tail water level, in meters, is : a) 6 b) 4 c) 3 d) 2

Description : Assume that water vaporizes at an absolute pressure of 1.5 m, barometric pressure head is 9.5 m and cavitation coefficient is 0.1 A turbine operates under a head of 40 m. the safe height of the runner above the tail water level, in meters, is : a) 6 b) 4 c) 3 d) 2

Last Answer : b) 4

what's the momentum of a 3.5-kg boulder rolling downhill at 5 m/s? -General Knowledge

Description : what's the momentum of a 3.5-kg boulder rolling downhill at 5 m/s? -General Knowledge

Last Answer : The momentum of a 3.5-kg boulder rolling downhill at 5 m/s is 17.5 kg m/s. p=mv = 3.5 * 5 = 17.5.

How many metres of cloth 5 m wide will be required to make a conical tent, the radius of whose base is 7 m and whose height is 24 m? -Maths 9th

Description : How many metres of cloth 5 m wide will be required to make a conical tent, the radius of whose base is 7 m and whose height is 24 m? -Maths 9th

Last Answer : Given, radius (r) = 7 m and height (h) = 24m ∴ Slant height (l) = √h2 + r2 = √242 + 72 = √625 = 25 m ∴ Length of canvas required

How many metres of 5 m wide cloth will be required to make a conical tent, the radius of whose base is 3.5 m and height is 12 m ? -Maths 9th

Description : How many metres of 5 m wide cloth will be required to make a conical tent, the radius of whose base is 3.5 m and height is 12 m ? -Maths 9th

Last Answer : l = √h2 + r2 = √(3.5)2 + (12)2 = √12.25 + 144 = √156.25 = 12.5 m Curved surface area = πrl = 22 / 7 × 3.5 × 12.5 = 137.5 m2 Area of cloth = 137.5 m2 Length of cloth required = C.S.A. / Width l = 137.5 / 5 = 27.5 m

How many metres of cloth 5 m wide will be required to make a conical tent, the radius of whose base is 7 m and whose height is 24 m? -Maths 9th

Description : How many metres of cloth 5 m wide will be required to make a conical tent, the radius of whose base is 7 m and whose height is 24 m? -Maths 9th

Last Answer : Given, radius (r) = 7 m and height (h) = 24m ∴ Slant height (l) = √h2 + r2 = √242 + 72 = √625 = 25 m ∴ Length of canvas required

How many metres of 5 m wide cloth will be required to make a conical tent, the radius of whose base is 3.5 m and height is 12 m ? -Maths 9th

Description : How many metres of 5 m wide cloth will be required to make a conical tent, the radius of whose base is 3.5 m and height is 12 m ? -Maths 9th

Last Answer : l = √h2 + r2 = √(3.5)2 + (12)2 = √12.25 + 144 = √156.25 = 12.5 m Curved surface area = πrl = 22 / 7 × 3.5 × 12.5 = 137.5 m2 Area of cloth = 137.5 m2 Length of cloth required = C.S.A. / Width l = 137.5 / 5 = 27.5 m

How many square metres of canvas is required for a conical tent whose height is 3.5 m and the radius of the base is 12 m? -Maths 9th

Description : How many square metres of canvas is required for a conical tent whose height is 3.5 m and the radius of the base is 12 m? -Maths 9th

Last Answer : Slantheight5l = h2+r2 ​=(3.5)2+(12)2​ total canvas required = πrl =π×12×12.5 =471 sq m​

How many square metres of canvas is required for a conical tent whose height is 3.5 m and the radius of the base is 12 m? -Maths 9th

Description : How many square metres of canvas is required for a conical tent whose height is 3.5 m and the radius of the base is 12 m? -Maths 9th

Last Answer : Solution of this question

For a clay slope of height of 10 m, the stability number is 0.05, = 2.0 t/m3 , C = 2.5 t/m2 , the critical height of the slope of the soil, is (A) 4.0 m (B) 12.5 m (C) 25.0 m (D) 15.0 m

Description : For a clay slope of height of 10 m, the stability number is 0.05, = 2.0 t/m3 , C = 2.5 t/m2 , the critical height of the slope of the soil, is (A) 4.0 m (B) 12.5 m (C) 25.0 m (D) 15.0 m

Last Answer : (C) 25.0 m

Two dice are rolling simultaneously .What is the probability that the sum of the number on the two faces is divided by 5 Or 7. A) 13/36 B) 14/36 C) 11/36 D) 9/36

Description : Two dice are rolling simultaneously .What is the probability that the sum of the number on the two faces is divided by 5 Or 7. A) 13/36 B) 14/36 C) 11/36 D) 9/36 

Last Answer :  Answer: C) Clearly, n(S) = 6 x 6 = 36 Let E be the event that the sum of the numbers on the two faces is divided by 5or 7. Then,E = {(1,4),(1,6),(2,3),(2,5),(3,2),(3,4),(4,1),(4,3),(4,6),(5,2),(5,5),(6,1),(6,4)} n(E) = 11. Hence, P(E) = n(E)/n(S) = 11/36

Maximum height of rolling stock on BG should be (a) 2745mm (b) 3250mm (c) 3450mm (d) 4140mm*

Description : Maximum height of rolling stock on BG should be (a) 2745mm (b) 3250mm (c) 3450mm (d) 4140mm*

Last Answer : (d) 4140mm*

What length of tarpaulin 3 m wide will be required to make conical tent of height 8 m and base radius 6m -Maths 9th

Description : What length of tarpaulin 3 m wide will be required to make conical tent of height 8 m and base radius 6m -Maths 9th

Last Answer : Solution: Height of conical tent, h = 8m Radius of base of tent, r = 6m Slant height of tent, l2 = (r2+h2) l2 = (62+82) = (36+64) = (100) or l = 10 Again, CSA of conical tent = πrl = (3.14 6 ... .2) 3] = 188.4 L-0.2 = 62.8 L = 63 Therefore, the length of the required tarpaulin sheet will be 63 m.

For a function given by F = 4x i + 7y j +z k, the divergence theorem evaluates to which of the values given, if the surface considered is a cone of radius 1/2π m and height 4π 2 m. a) 1 b) 2 c) 3 d) 4

Description : For a function given by F = 4x i + 7y j +z k, the divergence theorem evaluates to which of the values given, if the surface considered is a cone of radius 1/2π m and height 4π 2 m. a) 1 b) 2 c) 3 d) 4

Last Answer : b) 2