Description : The unit of measurement is per quintal for the following: (A) Collapsible gates with rails (B) Rolling shutters (C) Expanded metal wire netting (D) M.S. reinforcement of R.C.C. works
Last Answer : (D) M.S. reinforcement of R.C.C. works
Description : Pick up the correct statement from the following: (A) Pointing is measured in sq.m (B) Plastering is measured in sq.m (C) Glazing is measured in sq.m (D) All the above
Last Answer : (D) All the above
Description : The item of the brick structure measured in sq.m, is (A) Reinforced brick work (B) Broken glass coping (C) Brick edging (D) Brick work in arches
Last Answer : (B) Broken glass coping
Description : Pick up the incorrect statement from the following: (A) Dimensions are measured to the nearest 0.01 m (B) Areas are measured to the nearest 0.01 sq.m (C) Cubic contents are measured to the nearest 0.1 cum (D) Weights are measured to the nearest 0.001 tonnes
Last Answer : (D) Weights are measured to the nearest 0.001 tonnes
Description : Brick walls are measured in sq. m if the thickness of the wall is (A) 10 cm (B) 15 cm (C) 20 cm (D) None of these
Last Answer : (A) 10 cm
Description : A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2 MN/mm2 , the ... N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option
Last Answer : (C) 120 N/mm
Description : Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm
Last Answer : Answer: Option C
Description : The brick work is measured in sq metre, in case of (A) Honey comb brick work (B) Brick flat soling (C) Half brick walls or the partition (D) All the above
Description : Bill Gates resides in a 66,000 sq-ft mansion with 60 ft swimming pool and was assessed by _________ as $125 million and annual property taxes are $991,000. A. King County public records B. Forbes C. PCMag D. None of Above
Last Answer : ANSWER: A
Description : Glazing is used to make earthenware (A) Hard (B) Soft (C) Porous (D) Impervious
Last Answer : Answer: Option D
Description : Glazing of clay products, is done (A) To improve their appearance (B) To protect them from atmospheric effect (C) To protect them from corrosive action (D) All the above
Description : For sanitary pipes and chemical stonewares, (A) Salt glazing is used (B) Lead glazing is used (C) Opaque glazing is used (D) None of these
Last Answer : Answer: Option A
Description : Do people with lung cancer often need home ventilators?
Last Answer : In lung cancer the effective surface area reduces, leading to breathlessness. Actually human lungs have lot of spare capacity. A person can lead normal life even one lung is completely removed. All the same those who are suffering from extreme condtions are likely to need home ventilator.
Description : Ventilators are provided near the ceiling of the room because – (1) the exhaled warmer air rises up and goes out (2) these provide cross ventilation in the room (3) these provide some sunlight in the room (4) these do not look nice in the lower part
Last Answer : (1) the exhaled warmer air rises up and goes out Explanation: Ventilation is a room air distribution strategy where conditioned outdoor air is supplied at floor level and extracted above the occupied zone, ... to heat exchange with heat sources in the space (e.g., occupants, computers, lights).
Description : Ventilators are provided near the ceiling of the room because (1) the exhaled warmer air rises up and goes out (2) these provide cross ventilation in the room (3) these provide some sunlight in the room (4) these do not look nice in the lower part
Last Answer : the exhaled warmer air rises up and goes out
Description : The following item of earth work is not measured separately. (A) Setting out of works (B) Site clearance (C) Steps in deep excavation (D) All the above
Description : A short column 20 cm 20 cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 300 kg/cm2 , the Safe load on ... should not exceed (A) 4120 kg (B) 41,200 kg (C) 412,000 kg (D) None of these
Last Answer : Answer: Option B
Description : For 12 mm thick cement plastering 1 : 6 on 100 sq.m new brick work, the quantity of cement required, is (A) 0.200 m3 (B) 0.247 m3 (C) 0.274 m3 (D) 0.295 m
Last Answer : (C) 0.274 m3
Description : how to create an accordion (collapsible content) ? -How To ?
Last Answer : answer:
Description : What's the weight limit on a collapsible hand truck?
Last Answer : There are many different hand trucks available for purchase. The weight limit depends on the size you choose. Some offer a heavy weight limit and others offer a light weight limit.
Description : Is a collapsible hand truck as sturdy as the ones that do not collapse?
Last Answer : The collapsible hand truck is a great way to develop these items. The best thing to do is to try it before you buy it.
Description : Collapsible tubes for tooth paste are produced by __________ extrusion. (A) Direct (B) Indirect (C) Impact (D) None of these
Last Answer : (C) Impact
Description : Tin in its pure form is used for making (A) Cans for food packing (B) Collapsible tubes for toilet preparations (C) Foil for wrapping cheese (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Describe the working of collapsible steering column with sketch.
Last Answer : Collapsible steering column: Working: The design of these columns is such that they collapse due to impact forces caused during head-on collision of the vehicle. The collapsing columns ... Arrangement of a ball type collapsible steering column in normal mode and in collapsed condition.
Description : Pick up the correct statement in case of water supply. (A) Pipes laid in trenches and pipes fixed to walls are measured separately (B) Cutting through walls and floors are included with the item (C) Pipes are classified according to their sizes and quality (D) All the above
Description : The output quality of a printer is measured by A) Dot per inch B) Dot per sq. inch C) Dots printed per unit time D) All of above
Last Answer : Answer : B
Description : The output quality of a printer is measured by A) Dot per sq. inch B) Dot per inch C) Dots printed per unit time D) All of the above
Description : The output quality of a printer is measured by a. Dot per inch b. Dot per sq. inch c. Dots printed per unit time d. All of above
Last Answer : Dot per sq. inch
Last Answer : b. Dot per sq. inch
Description : For 100 sq. m cement concrete (1 : 2: 4) 4 cm thick floor, the quantity of cement required, is (A) 0.90 m3 (B) 0.94 m3 (C) 0.98 m3 (D) 1.00 m3
Last Answer : (B) 0.94 m3
Description : The expected out turn of 12 mm plastering with cement mortar is (A) 2.5 sq m (B) 4.0 sq m (C) 6.0 sq m (D) 8.0 sq m
Last Answer : (D) 8.0 sq m
Description : Pick up the incorrect statement from the following: (A) No deduction is made for the volume occupied by reinforcement (B) No deduction is made for the openings upto 0.1 sq.m (C) No deduction is made for volumes occupied by pipes, not exceeding 100 sq.cm in crosssection (D) None of these
Last Answer : (D) None of these
Description : The excavation exceeding 1.5 m in width and 10 sq.m in plan area with a depth not exceeding 30 cm, is termed as (A) Excavation (B) Surface dressing (C) Cutting (D) Surface excavation
Last Answer : (D) Surface excavation
Description : The plinth area of a building not includes (A) Area of the walls at the floor level (B) Internal shaft for sanitary installations up to 2 sq m. in area (C) Lift and wall including landing (D) Area of cantilevered porch
Last Answer : (D) Area of cantilevered porch
Description : If the effective plan area of a warehouse is 54 sq. m, and maximum height of piles permitted is 270 cm, the number of cement bags to be stored, is (A) 2000 bags (B) 2200 bags (C) 2400 bags (D) 2700 bags
Description : A single rolling load of 8 kN rolls along a girder of 15 m span. The absolute maximum bending moment will be (A) 8 kN.m (B) 15 kN.m (C) 30 kN.m (D) 60 kN.m
Last Answer : (C) 30 kN.m
Description : The meatcentric height of a ship is 0.6 m and the radius of gyration is 4 m. The time of rolling of a ship is (A) 4.1 s (B) 5.2 s (C) 10.4 s (D) 14.1 s
Description : The normal road width of National and State highways (A) Is kept 45 m (B) In plain and rolling terrain built-up area, is 30 m (C) In mountainous built-up area is 20 m (D) All the above
Description : How many coats of glazing can be put on a bisque fired vessel?
Last Answer : answer:It depends on the formulation of the glaze and the thickness of the coats. If it's a glaze with a high alumina content that stays put, then you should be fine; a runnier glaze will run even ... too thick, you can always wash it off the bisque, let the bisque dry completely, and start over.
Description : Why is glazing used to make ceramic materials ?
Last Answer : A mixture of ceramic materials is molded into a specific molding of the crossing and after drying in hot air, it is burned and turned into perforated burnt ceramic material or biscuits. In this ... . into a thin glass material. Glazing closes the pores on the surface of the material biscuits.
Description : What is a glazing spline and channel?
Last Answer : Glazing spine and channel make it easy to choose the correct vinyl need for the application. DKHardware have lots of options for the glazing spine at reasonable cost with multiple options.
Description : What are the merits / advantages of glazing ceramic articles?
Last Answer : a) Glazing plugs the pores present in the baked ceramic articles. b) Glazing provides a smooth, attractive look and bright glossy surface to the articles. c) Glazing provides desired colour to the articles.
Description : Explain glazing of ceramic articles.
Last Answer : Glazing is achieved by addition of suitable fillers. It is fired again to create coloured, smooth surface.
Description : What is glazing of ceramics?
Last Answer : The process of making the clay products into non-porous shining material is called Glazing.
Description : When should metallic framework not be contaminated during the fabrication of a porcelain fused to metal crown: A. Between bisque stage and glazing stage B. Between preheat and opaque stages C. Between opaque and bisque stages D. Between one opaque and two opaque stages
Last Answer : B. Between preheat and opaque stages
Description : Porcelain must not be contaminated by handling between which two stages: A. Pre-soldering and heat treatment B. Heat treatment and opaque /bake/ stages C. Opaque and bisque stages D. Bisque and glazing stages E. First opaque bake and second opaque bake
Last Answer : A. Pre-soldering and heat treatment
Description : ____ is done by dipping the fish in cold water and then freezing a layer before dipping the fish again. a. Cleaning c. Glazing b. Skinning d. Dressing
Last Answer : c. Glazing
Description : Sulphur in metallurgical coal (A) Contributes to its heating value (B) Affects the quality of steel produced as cracks develop on the surface while rolling the steel (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) and (B)