State the following, 1) Position of head light 2) Supply voltage for flasher light 3) Colours used for marker light 4) Frequencies for engine horn.

State the following, 1) Position of head light 2) Supply voltage for flasher light 3) Colours used for marker light 4) Frequencies for engine horn. 
by

1 Answer

Answer :

Ans: 1) Position of head light: Head light is located at center near roof level. 2) Supply voltage for flasher light: Nominal 110 V. dc, range 70 V to 140 V. 3) Colours used for marker light: Normally the marker lamps are white in front and the rear marker lights are red, when the loco is travelling alone, red marker indicates parking light 4) Frequencies for engine horn: For HT horn – 660 Hz For LT horn – 330 Hz
by

Related questions

The sequence of marker colours when flying an ILS approach is: a. White, blue, amber b. Blue, white, amber c. Blue, amber, white d. Amber, blue, white

Description : The sequence of marker colours when flying an ILS approach is: a. White, blue, amber b. Blue, white, amber c. Blue, amber, white d. Amber, blue, white

Last Answer : c. Blue, amber, white

Considering the function of the circuit shown in the illustration, what is the purpose of supplying the thrust lever potentiometers with both (+) and (-) 15 volts? EL-0095 A. To select which lever (bridge or engine room) is active. B. So the circuit can differentiate between ahead and astern commands. C. To provide an alternate voltage supply if the other fails. D. So as to automatically select the position of Relay #

Description : Considering the function of the circuit shown in the illustration, what is the purpose of supplying the thrust lever potentiometers with both (+) and (-) 15 volts? EL-0095 A. To select which ... alternate voltage supply if the other fails. D. So as to automatically select the position of Relay #

Last Answer : Answer: B

The battery has following three major functions to perform: a) To provide a source of current for engine starting, lighting and use of horn. b) To help control the voltage in the electrical system. c) To store the current produced by dynamo/alternator and to furnish the current d) all of the above. Ans. d

Description : The battery has following three major functions to perform: a) To provide a source of current for engine starting, lighting and use of horn. b) To help control the voltage in the electrical system. c ... the current produced by dynamo/alternator and to furnish the current d) all of the above. Ans. d

Last Answer : ans d

A marker on the computer screen used to show the current position is called _________ A. coloured marker B. position checker C. cursor D. None of the Above

Description : A marker on the computer screen used to show the current position is called _________ A. coloured marker B. position checker C. cursor D. None of the Above

Last Answer : C. cursor

Which is type of Robotics Perception A : Marker related B : Map related C : Path related D : Position related

Description : Which is type of Robotics Perception A : Marker related B : Map related C : Path related D : Position related

Last Answer : A : Marker related

Which is type of Robotics Perception A : Marker related B : Map related C : Path relatedD : Position related

Description : Which is type of Robotics Perception A : Marker related B : Map related C : Path relatedD : Position related

Last Answer : A : Marker related

Which is type of Robotics Perception A : Marker related B : Map relatedC : Path related D : Position related

Description : Which is type of Robotics Perception A : Marker related B : Map relatedC : Path related D : Position related

Last Answer : A : Marker related

Which is type of Robotics Perception A : Marker related B : Map related C : Path related D : Position related

Description : Which is type of Robotics Perception A : Marker related B : Map related C : Path related D : Position related

Last Answer : B : Map related

One of the FM signal generator control which varies the phase of the modulating voltage applied to the oscillator of the sweep generator A. Band control B. Phase control C. Marker amplitude control D. Sweep output control

Description : One of the FM signal generator control which varies the phase of the modulating voltage applied to the oscillator of the sweep generator A. Band control B. Phase control C. Marker amplitude control D. Sweep output control

Last Answer : B. Phase control

Where is the turn signal flasher located on a 1993 Nissan pickup?

Description : Where is the turn signal flasher located on a 1993 Nissan pickup?

Last Answer : Under the dash, directly above the clutch pedal arm and attached to the brake support bracket.

Where is turn signal flasher located on 2004 f650?

Description : Where is turn signal flasher located on 2004 f650?

Last Answer : Need answer

Where is the flasher relay located on a 2005 379 peterbilt you tube?

Description : Where is the flasher relay located on a 2005 379 peterbilt you tube?

Last Answer : Need answer

Where is the turn signal flasher location on the 1995 Lincoln town car?

Description : Where is the turn signal flasher location on the 1995 Lincoln town car?

Last Answer : TO THE BEST OF MY KNOWLEDGE THERE IS NO PLUG-IN FLASHER BASE FORREPLACEMENT. IT IS IN THE ELECTRONICS MODULE LOCATED JUST TO THELEFT OF THE ASH TRAY PULL OUT, DOWN TOWARDS THE BOTTOM OF THE DASH. ... the unit alittle time to dry, I plugged the 2 harnesses in back in, andeverything worked like new.

Where is the turn signal flasher on a 2001 Kia Rio?

Description : Where is the turn signal flasher on a 2001 Kia Rio?

Last Answer : Feel Free to Answer

Where is the flasher unit 92 Toyota estima?

Description : Where is the flasher unit 92 Toyota estima?

Last Answer : What is the answer ?

Where is turn signal flasher located in 2015 Toyota Highlander?

Description : Where is turn signal flasher located in 2015 Toyota Highlander?

Last Answer : Need answer

In a cartridge-type fuse, the metal element is contained in a ___________________. A. porcelain window B. thermal cut out C. fiber tube D. flasher device

Description : In a cartridge-type fuse, the metal element is contained in a ___________________. A. porcelain window B. thermal cut out C. fiber tube D. flasher device

Last Answer : Answer: C

If you are required to monitor the speed of a device with a stroboscope over an extended period of time, what step should be taken to prolong the life of the flasher tube?

Description : If you are required to monitor the speed of a device with a stroboscope over an extended period of time, what step should be taken to prolong the life of the flasher tube?

Last Answer : Monitor a submultiple frequency to prolong the flasher-tube life.

A flasher circuit application is a : -

Description : A flasher circuit application is a : -  a) Safety blinkers for bicycles c) Street Light Control  b) Rides lighting d) Glow lamp

Last Answer : A flasher circuit application is a : - Safety blinkers for bicycles 

The visual and aural indications obtained when overflying an ILS middle marker are: a. Continuous low pitched dashes with synchronized blue light b. Continuous high pitched dots with synchronized amber light c. Alternating medium pitch dots and dashes with amber light d. One letter in Morse with synchronized white light

Description : The visual and aural indications obtained when overflying an ILS middle marker are: a. Continuous low pitched dashes with synchronized blue light b. Continuous high pitched dots with synchronized amber ... dots and dashes with amber light d. One letter in Morse with synchronized white light

Last Answer : c. Alternating medium pitch dots and dashes with amber light

None Snake In the head Horn Is there ?

Last Answer : Rattle Snack '- this Snake In the head High Horn There is .

Which of the following is an endemic species? (1) Horn bill (2) Indian Rhino (3) Pink head duck (4) Nicobar pigeon

Description : Which of the following is an endemic species? (1) Horn bill (2) Indian Rhino (3) Pink head duck (4) Nicobar pigeon

Last Answer : (1) Horn bill Explanation: The Malabar Grey Hornbill is a hornbill that is endemic to the Western Ghats and associated hills of southern India. They are found mainly in dense forest and around rubber, arecanut or coffee plantations.

Which of the following is an endemic species ? (1) Horn bill (2) Indian Rhino (3) Pink head duck (4) Nicobar pigeon

Description : Which of the following is an endemic species ? (1) Horn bill (2) Indian Rhino (3) Pink head duck (4) Nicobar pigeon

Last Answer : Horn bill

kilohertz (kHz) is a unit which measures? A. Power used by a current of one ampere B. Electromagnetic radio wave frequencies (Answer) C. Voltage D. Electric resistance

Description : kilohertz (kHz) is a unit which measures? A. Power used by a current of one ampere B. Electromagnetic radio wave frequencies (Answer) C. Voltage D. Electric resistance

Last Answer : B. Electromagnetic radio wave frequencies (Answer)

What is the filter called in which the low frequencies do not produce a useful voltage?

Description : What is the filter called in which the low frequencies do not produce a useful voltage?

Last Answer : High-pass filter, low-frequency discriminator, or low-frequency attenuator.

How does transit time affect the relationship of the grid voltage and the plate current at high frequencies?

Description : How does transit time affect the relationship of the grid voltage and the plate current at high frequencies?

Last Answer : Transit time causes the grid voltage and plate current to be out of phase

The frequencies and voltage used in Dielectric heating are

Description : The frequencies and voltage used in Dielectric heating are (A) 10 – 30 MHz, upto 25 kV (B) 50 – 60 Hz, upto 25 kV (C) 10 – 30 MHz, upto 100 V (D) 50 – 60 Hz, 110 V – 230 V

Last Answer : The frequencies and voltage used in Dielectric heating are 10 – 30 MHz, upto 25 kV

Why the primary colours of paints are different from the primary colours of light?

Description : Why the primary colours of paints are different from the primary colours of light?

Last Answer : Because color in terms of wave-length is an additive phenomenon, and tint, in terms of pigment is a subtractive phenomenon.

When viewed in white light, why do soap bubbles show colours? -Do You Know?

Description : When viewed in white light, why do soap bubbles show colours? -Do You Know?

Last Answer : When viewed in white light, a soap bubble shows colours because of. Due to interference, when soap bubble is viewed in white light it shows colours.

How is the rate of photosynthesis in a pond weed affected by the different colours of light?

Description : How is the rate of photosynthesis in a pond weed affected by the different colours of light?

Last Answer : Feel Free to Answer

What are primary colours? (a) Colours of the rainbow (b) Colours in the spectrum of white light (c) Colours which cannot be produced by mixing other colours (d) Colours found in nature

Description : What are primary colours? (a) Colours of the rainbow (b) Colours in the spectrum of white light (c) Colours which cannot be produced by mixing other colours (d) Colours found in nature

Last Answer : Ans:(c)

When white light passes through a glass prism, it gets dispersed into colours because (a) glass imparts colours to the light (b) different colours have different speeds in glass (c) interference of light occurs (d) diffraction of light occurs

Description : When white light passes through a glass prism, it gets dispersed into colours because (a) glass imparts colours to the light (b) different colours have different speeds in glass (c) interference of light occurs (d) diffraction of light occurs

Last Answer : Ans:(b)

Light coloured clothes are preferred in summer because (a) light colours are good radiators of heat (b) light colours are poor absorbers of heat (c) they soak sweat faster (d) they allow body heat to escape faster

Description : Light coloured clothes are preferred in summer because (a) light colours are good radiators of heat (b) light colours are poor absorbers of heat (c) they soak sweat faster (d) they allow body heat to escape faster

Last Answer : Ans:(b)

What causes changes in the colours of the soap or oil films for the given beam of light? (a) Angle of incidence (b) Angle of reflection (c) Thickness of film (d) None of these

Description : What causes changes in the colours of the soap or oil films for the given beam of light? (a) Angle of incidence (b) Angle of reflection (c) Thickness of film (d) None of these

Last Answer : Ans:(c)

The sky appears blue because – (1) All colours interfere to produce blue (2) In white light, the blue component dominates (3) The atmosphere scatters blue colour more than the others (4) It is actually blue

Description : The sky appears blue because – (1) All colours interfere to produce blue (2) In white light, the blue component dominates (3) The atmosphere scatters blue colour more than the others (4) It is actually blue

Last Answer : (3) The atmosphere scatters blue colour more than the others Explanation: Diffuse sky radiation is solar radiation reaching the Earth's surface after having been scattered from the direct solar beam by ... the atmosphere (approximately 25% of the incident radiation when the sun is high in the Sky.

The sky appears blue because – (1) All colours interfere to produce blue (2) In white light, the blue component dominates (3) The atmosphere scatters blue colour more than the others (4) It is actually blue

Description : The sky appears blue because – (1) All colours interfere to produce blue (2) In white light, the blue component dominates (3) The atmosphere scatters blue colour more than the others (4) It is actually blue

Last Answer : (3) The atmosphere scatters blue colour more than the others Explanation: Diffuse sky radiation is solar radiation reaching the Earth's surface after having been scattered from the direct solar beam by ... the atmosphere (approximately 25% of the incident radiation when the sun is high in the Sky.

Sun appears red in colour at sun-rise and sunset due to – (1) the fact that sun emits only red colour at that time (2) red light having longer wave length scatters away (3) that sun Comes out of the mountains (4) that all other colours scatter away except red

Description : Sun appears red in colour at sun-rise and sunset due to – (1) the fact that sun emits only red colour at that time (2) red light having longer wave length scatters away (3) that sun Comes out of the mountains (4) that all other colours scatter away except red

Last Answer : (4) that all other colours scatter away except red Explanation: According to Rayleigh's law, the intensity of scattered light varies inversely as the fourth power of its wavelength. Sunlight consists of ... have to travel a larger part of the atmosphere because they are very close to the horizon.

The blue colour of water in the sea is due to – (1) absorption of other colours except blue by water molecules (2) scattering of blue light by water molecules (3) reflection of blue light by impurities in sea water (4) reflection of blue sky by sea water

Description : The blue colour of water in the sea is due to – (1) absorption of other colours except blue by water molecules (2) scattering of blue light by water molecules (3) reflection of blue light by impurities in sea water (4) reflection of blue sky by sea water

Last Answer : (1) absorption of other colours except blue by water molecules Explanation: Almost all sunlight that enters the ocean is absorbed, except very close to the coast. The red, yellow, and green ... to the absorption and scattering of light. The blue wavelengths of light are scattered, similar to the

Purpose of an optical filter is to – (1) reflect lights of different colours (2) dispense light into component colours (3) refract light of different colours (4) transmit or absorb light of different colours

Description : Purpose of an optical filter is to – (1) reflect lights of different colours (2) dispense light into component colours (3) refract light of different colours (4) transmit or absorb light of different colours

Last Answer : (4) transmit or absorb light of different colours Explanation: Optical filters are devices that selectively transmit light in a particular range of wavelengths, that is, colors, while ... as absorptive filters), fluorescence microscopy, spectroscopy, clinical chemistry, colour stage lighting, etc.

A ray of white light strikes the surface of an object. If all the colours are reflected, the surface would appear (1) Black (2) White (3) Grey (4) Opaque

Description : A ray of white light strikes the surface of an object. If all the colours are reflected, the surface would appear (1) Black (2) White (3) Grey (4) Opaque

Last Answer : (2) White Explanation: Objects do not have any colour of their own. When light hits a surface, some of it is absorbed and some of it is reflected. The light that is reflected is ... appear white when they reflect all the wavelengths; they appear black when they absorb all visible wavelengths.

Light waves projected on oil surface show seven colours due to the phenomenon of (1) polarisation (2) refraction (3) reflection (4) interference

Description : Light waves projected on oil surface show seven colours due to the phenomenon of (1) polarisation (2) refraction (3) reflection (4) interference

Last Answer : (4) interference Explanation: In physics, interference is a phenomenon in which two waves superpose to form a resultant wave of greater, lower, or the same amplitude.

A soap bubble shows colours when illuminated with white light. This is due to – (1) Diffraction (2) Polarization (3) Interference (4) Reflection

Description : A soap bubble shows colours when illuminated with white light. This is due to – (1) Diffraction (2) Polarization (3) Interference (4) Reflection

Last Answer : (3) Interference Explanation: The iridescent colours of soap bubbles are caused by interfering of (internally and externally) reflected light waves and are determined by the thickness of the film. This phenomenon ... are the same as the phenomenon causing the colours in an oil slick on a wet road.

"Tice splitting of different colours of light in a prism is : (1) Reflection of light (2) Dispersion light (3) Diffraction light (4) Refraction of light

Description : "Tice splitting of different colours of light in a prism is : (1) Reflection of light (2) Dispersion light (3) Diffraction light (4) Refraction of light

Last Answer : (2) Dispersion light Explanation: The refractive index of many materials (such as glass) varies with the wavelength or colour of the light used, a phenomenon known as dispersion. This causes ... a wave depends on its frequency, or alternatively when the group velocity depends on the frequency.

Which of the following is used to split white light into different colours? (1) Glass slab (2) Convex lens (3) Concave lens (4) Prism

Description : Which of the following is used to split white light into different colours? (1) Glass slab (2) Convex lens (3) Concave lens (4) Prism

Last Answer : (4) Prism Explanation: In optics, a prism is a transparent optical element with flat, polished surfaces that refract light. At least two of the flat surfaces must have an angle between them. The ... a triangular base and rectangular sides, and in colloquial use "prism" usually refers to this type.

The band of seven colours obtained due to the dispersion of white light is called?

Description : The band of seven colours obtained due to the dispersion of white light is called?

Last Answer : Visible Spectrum

What is the phenomenon of splitting white light into seven colours?

Description : What is the phenomenon of splitting white light into seven colours?

Last Answer : Dispersion

When viewed in white light, why do soap bubbles show colours?

Description : When viewed in white light, why do soap bubbles show colours?

Last Answer : Because of interference

Light colours absorb less heat therefore these are not heated as much as the black colour.

Description : Light colours absorb less heat therefore these are not heated as much as the black colour.

Last Answer : Ans: Dark colours do not exactly absorb more heat, but they do convert a higher percentage of light into heat. In the sun with a dark coloured shirt it gets hot, where a lighter ... and converted into heat. White objects reflect all visible light, where black objects absorb all visible light.

which of the following statements is not true for scattering of light? (a) Colour of the scattered tight depends on the size of particles of the atmosphere. (b) Red light is least scattered in the atmosphere. (c) Scattering of light Lakes place as various colours of white light travel with different speed in fir. d) The fine particles in the atmospheric air scatter the blue, light more strongly than red. So the scattered blue light enters our eyes.

Description : which of the following statements is not true for scattering of light? (a) Colour of the scattered tight depends on the size of particles of the atmosphere. (b) Red light is least scattered in the ... air scatter the blue, light more strongly than red. So the scattered blue light enters our eyes.

Last Answer : (c) Scattering of light Lakes place as various colours of white light travel with different speed in fir.

When white light is passed through a prism, it splits into ----- colours. A. 5 B. 6 C. 7 (Answer) D. 8

Description : When white light is passed through a prism, it splits into ----- colours. A. 5 B. 6 C. 7 (Answer) D. 8

Last Answer : C. 7 (Answer)