The battery has following three major functions to perform: a) To provide a source of current for engine starting, lighting and use of horn. b) To help control the voltage in the electrical system. c) To store the current produced by dynamo/alternator and to furnish the current d) all of the above. Ans. d

The battery has following three major functions to perform: a) To provide a source of current for engine starting, lighting and use of horn. b) To help control the voltage in the electrical system. c) To store the current produced by dynamo/alternator and to furnish the current d) all of the above. Ans. d
by

1 Answer

Answer :

ans d
by

Related questions

A turbo chargers are driven by 1. Engine 2. Exhaust gas 3. Dynamo 4. PTO ans 2

Description : A turbo chargers are driven by 1. Engine 2. Exhaust gas 3. Dynamo 4. PTO ans 2

Last Answer : ans 2

Main function of cutout relay in electrical circuit is A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces. B. To restrict the maximum output at high speed. C. To permit the generation to deliver current to the battery or to the lightening and ignition circuit. D. None of the above

Description : Main function of cutout relay in electrical circuit is A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces. B. To restrict the maximum output at ... deliver current to the battery or to the lightening and ignition circuit. D. None of the above

Last Answer : A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces.

Insulators perform which of the following functions? a) Conduction b) Convection c) Provide electrical insulation d) Allows current leakage at interfaces

Description : Insulators perform which of the following functions? a) Conduction b) Convection c) Provide electrical insulation d) Allows current leakage at interfaces

Last Answer : c) Provide electrical insulation

main function of the current regulator is A. To prevent the reversal flow of current from the battery when dynamo speed is drops. B. To safeguard against flow of high currents to battery when armature develops more current. C. To prevent building up of high voltage in a circuit. D. None of the above

Description : main function of the current regulator is A. To prevent the reversal flow of current from the battery when dynamo speed is drops. B. To safeguard against flow of high currents to battery when armature develops ... . C. To prevent building up of high voltage in a circuit. D. None of the above

Last Answer : B. To safeguard against flow of high currents to battery when armature develops more current.

Conversion of chemical energy into electrical energy occurs in - (1) Atomic bombs (2) Dynamo (3) A battery (4) Electric heaters

Description : Conversion of chemical energy into electrical energy occurs in - (1) Atomic bombs (2) Dynamo (3) A battery (4) Electric heaters

Last Answer : (3) A battery Explanation: A battery is a form of chemical energy that can be converted to electrical energy. it is a device consisting of one or more electrochemical cells which performs this action. The first battery (or "voltaic pile") was invented in 1800 by Alessandro Volta.

Conversion of chemical energy into electrical energy occurs in – (1) atomic bombs (2) dynamo (3) a battery (4) electric heaters

Description : Conversion of chemical energy into electrical energy occurs in – (1) atomic bombs (2) dynamo (3) a battery (4) electric heaters

Last Answer : (3) a battery Explanation: Conversion of chemical energy into electrical energy occurs in battery.

Conversion of chemical energy into electrical energy occurs in (1) Atomic bombs (2) Dynamo (3) A battery (4) Electric heaters

Description : Conversion of chemical energy into electrical energy occurs in (1) Atomic bombs (2) Dynamo (3) A battery (4) Electric heaters

Last Answer : A battery

Choke in a I.C. engine is used to control a) Camshaft speed b) Specific fuel consumption c) Air fuel mixture d) Crankshaft speed Ans. c

Description : Choke in a I.C. engine is used to control a) Camshaft speed b) Specific fuel consumption c) Air fuel mixture d) Crankshaft speed Ans. c

Last Answer : ans c

n electrochemical cell which is used as a source of direct electrical current at constant voltage under standard conditions is called a – (1) Power transmittor (2) Battery (3) Uninterrupted power supply (UPS) (4) Generator

Description : n electrochemical cell which is used as a source of direct electrical current at constant voltage under standard conditions is called a – (1) Power transmittor (2) Battery (3) Uninterrupted power supply (UPS) (4) Generator

Last Answer : (3) Uninterrupted power supply (UPS) Explanation: A Galvanic cell, also known as battery, is an electro-chemical cell that derives electrical energy from spontaneous redox reactions taking place within ... produce direct current. A battery is a set of galvanic cells that are connected in parallel.

An electrochemical cell which is used as a source of direct electrical current at constant voltage under standard conditions is called a : (1) Power transmittor (2) Battery (3) Uninterrupted power supply (UPS) (4) Generator

Description : An electrochemical cell which is used as a source of direct electrical current at constant voltage under standard conditions is called a : (1) Power transmittor (2) Battery (3) Uninterrupted power supply (UPS) (4) Generator

Last Answer : Battery

According to Coast Guard Regulation (46 CFR) for emergency power and lighting systems, which of the listed items is the only permissible starting aid for the emergency diesel generator engine? A. Ether B. Lube oil heater C. Jacket water heater D. Fuel oil heater

Description : According to Coast Guard Regulation (46 CFR) for emergency power and lighting systems, which of the listed items is the only permissible starting aid for the emergency diesel generator engine? A. Ether B. Lube oil heater C. Jacket water heater D. Fuel oil heater

Last Answer : Answer: C

What is the control unit's function in the CPU 1) To transfer data to primary storage . 2) TO store program instructions. 3) To perform logic functions. 4) To decode program instructions.

Description : What is the control unit's function in the CPU 1) To transfer data to primary storage . 2) TO store program instructions. 3) To perform logic functions. 4) To decode program instructions.

Last Answer : 2) choose Insert, Header and Footer, click Slide tab, select the desired options, click Apply to All

When supplying emergency lighting loads, the storage battery initial voltage must not exceed the standard system voltage by more than _____________. A. 2% B. 3% C. 5% D. 10%

Description : When supplying emergency lighting loads, the storage battery initial voltage must not exceed the standard system voltage by more than _____________. A. 2% B. 3% C. 5% D. 10%

Last Answer : Answer: C

In two stroke engine, which of the following functions are performed at the same time? a. Compression and exhaust b. Intake and Expansion c. Intake and exhaust d. Intake and compression (Ans:c)

Description : In two stroke engine, which of the following functions are performed at the same time? a. Compression and exhaust b. Intake and Expansion c. Intake and exhaust d. Intake and compression (Ans:c)

Last Answer : The compression ratio in a Compression Ignition (CI) engine is generally in between a. 8 to 13 b. 14 to 23 c. 20 to 28 d. 25 to 32 (Ans:b)

The electrolyte in a lead-acid battery is a) H2SO4 b) HNO3 c) HCl d) NaCl Ans. a

Description : The electrolyte in a lead-acid battery is a) H2SO4 b) HNO3 c) HCl d) NaCl Ans. a

Last Answer : ans a

Battery operated sprayer consists of 10 lit capacity tank and rechargeable battery. b. 10 Volt c. 12 Volt. d. None of above Ans- a. 6 Volt

Description : Battery operated sprayer consists of 10 lit capacity tank and rechargeable battery. b. 10 Volt c. 12 Volt. d. None of above Ans- a. 6 Volt

Last Answer : Ans-    a. 6 Volt

State the following, 1) Position of head light 2) Supply voltage for flasher light 3) Colours used for marker light 4) Frequencies for engine horn.

Description : State the following, 1) Position of head light 2) Supply voltage for flasher light 3) Colours used for marker light 4) Frequencies for engine horn. 

Last Answer : Ans: 1) Position of head light: Head light is located at center near roof level. 2) Supply voltage for flasher light: Nominal 110 V. dc, range 70 V to 140 V. 3) Colours used for marker light: ... indicates parking light 4) Frequencies for engine horn: For HT horn - 660 Hz For LT horn - 330 Hz

The engine produces dark black smoke due to a) Burning of oil b) Due of incomplete combustion c) Due to moisture in fuel d) None of these Ans. b

Description : The engine produces dark black smoke due to a) Burning of oil b) Due of incomplete combustion c) Due to moisture in fuel d) None of these Ans. b

Last Answer : ans b

In tractor engine which of the following is a device in which liquid fuel is converted into gaseous fuel? 1. Piston 2. Carburetor 3. Both 1 and 2 4. none of these ans 1

Description : In tractor engine which of the following is a device in which liquid fuel is converted into gaseous fuel? 1. Piston 2. Carburetor 3. Both 1 and 2 4. none of these ans 1

Last Answer : ans 1

What are the 5 major processes of project management? A. Closing, Executing, Planning, Monitoring and Controlling, Initiating (Ans.) B. Starting, Closing, Managing, Planning, Executing C. Initiating, Finishing, Monitoring and Controlling, Executing, Planning D. Starting, Finishing, Executing, Managing, Closing

Description : What are the 5 major processes of project management?  A. Closing, Executing, Planning, Monitoring and Controlling, Initiating (Ans.)  B. Starting, Closing, Managing, Planning, ... Finishing, Monitoring and Controlling, Executing, Planning D. Starting, Finishing, Executing, Managing, Closing

Last Answer : A. Closing, Executing, Planning, Monitoring and Controlling, Initiating (Ans.)

How do I connect low voltage outdoor lighting to home electrical?

Description : How do I connect low voltage outdoor lighting to home electrical?

Last Answer : The best way is to install an outside outlet with a GFI so you have some place where you can plug in the transformer. You can put the outlet near an existing indoor outlet. But that is not what you ... it? Many people just run an extension cord from a convenient spot - but that does not meet code. .

To remove an alternator operating in parallel with another unit from the main electrical bus, you must FIRST _________. A. adjust the power factor on both units B. set the desired voltage on the outgoing alternator C. open the circuit breaker on the outgoing alternator D. remove the load from the outgoing alternator

Description : To remove an alternator operating in parallel with another unit from the main electrical bus, you must FIRST _________. A. adjust the power factor on both units B. set the desired voltage on ... C. open the circuit breaker on the outgoing alternator D. remove the load from the outgoing alternator

Last Answer : Answer: D

The purpose of the automatic bus transfer shown in the illustration is to ___________. EL-0014 A. stepdown voltage to the lighting distribution panel B. provide emergency power to the lighting distribution panel C. energize the emergency switchboard from the main switchboard D. provide overcurrent protection to the lighting distribution panel

Description : The purpose of the automatic bus transfer shown in the illustration is to ___________. EL-0014 A. stepdown voltage to the lighting distribution panel B. provide emergency power to ... emergency switchboard from the main switchboard D. provide overcurrent protection to the lighting distribution panel

Last Answer : Answer: B

The source of emergency lighting and power at loss of normal ship's power on a cargo vessel should be obtained from the ______________. A. emergency generator supply to the emergency switchboard B. emergency generator supply to the main switchboard C. battery supply to the main switchboard D. turbogenerator supply to the emergency switchboard

Description : The source of emergency lighting and power at loss of normal ship's power on a cargo vessel should be obtained from the ______________. A. emergency generator supply to the emergency ... switchboard C. battery supply to the main switchboard D. turbogenerator supply to the emergency switchboard

Last Answer : Answer: A

The cycles per second developed by the alternator aboard your vessel is determined by _____________. A. the speed of the engine driving the alternator B. the resistance applied to the field rheostat C. the synchronous speed of induction D. the adjustments made to the voltage regulator

Description : The cycles per second developed by the alternator aboard your vessel is determined by _____________. A. the speed of the engine driving the alternator B. the resistance applied to the field rheostat C. the synchronous speed of induction D. the adjustments made to the voltage regulator

Last Answer : Answer: A

The function of the autotransformers used with the starters of large AC motors is to provide _____________. A. increased voltage for starting B. increased torque for starting C. reduced voltage for starting D. speed control

Description : The function of the autotransformers used with the starters of large AC motors is to provide _____________. A. increased voltage for starting B. increased torque for starting C. reduced voltage for starting D. speed control

Last Answer : Answer: C

A circuit breaker for a 300 KW alternator is rated at 470 amperes of full continuous load. The amount of overcurrent allowed is 125%. Which of the following conditions will trip the breaker? A. Sustained current flow of 470 amperes. B. Sustained current flow of 500 amperes for 10 minutes. C. Momentary starting load of 550 amperes. D. Sustained current flow of 590 amperes.

Description : A circuit breaker for a 300 KW alternator is rated at 470 amperes of full continuous load. The amount of overcurrent allowed is 125%. Which of the following conditions will trip the breaker? A. ... 10 minutes. C. Momentary starting load of 550 amperes. D. Sustained current flow of 590 amperes.

Last Answer : Answer: D

In the illustrated three phase alternator, line voltage is _________. EL-0074 A. 1.73 times the phase voltage B. equal to the phase voltage C. phase voltage divided by 1.73 D. unable to answer this question without knowing the line current

Description : In the illustrated three phase alternator, line voltage is _________. EL-0074 A. 1.73 times the phase voltage B. equal to the phase voltage C. phase voltage divided by 1.73 D. unable to answer this question without knowing the line current

Last Answer : Answer: A

The purpose of an impressed current cathodic protection system aboard ship is to _______________. A. prevent corrosion of the hull, propeller, rudder and line shafting B. neutralize the vessel's stray magnetic fields which would interfere with radar C. protect engine room and deck machinery from oxidation in the presence of salt air D. maintain a minimum constant alternator load to prevent overheating

Description : The purpose of an impressed current cathodic protection system aboard ship is to _______________. A. prevent corrosion of the hull, propeller, rudder and line shafting B. neutralize the vessel's ... the presence of salt air D. maintain a minimum constant alternator load to prevent overheating

Last Answer : Answer: A

Computer will perform the data processing functions in a.NC b.CNC c.DNC d.None of the mentioned

Description : Computer will perform the data processing functions in a.NC b.CNC c.DNC d.None of the mentioned

Last Answer : b.CNC

State the functions of following elements: i) Diesel engine system ii) Air intake system iii) Engine exhaust system iv) Engine starting system.

Description : State the functions of following elements: i) Diesel engine system ii) Air intake system iii) Engine exhaust system iv) Engine starting system.

Last Answer : i) Diesel engine system:-  Four strokes Two strokes ii) Air intake system:- Air intake system is provided to supply air to engine cylinder for fuel combustion.  iii) Engine exhaust system ... provided to rotate the engine initially until the firing starts and engine run under its own power. 

State the functions of the following components in a dynamo /motor.

Description : State the functions of the following components in a dynamo /motor.

Last Answer : a) Commutator: It is used to alter the direction of the current in me coil after every half rotation. b) Carbon brushes: it is used to supply a continuous current to the rotating coil through the commutator.

The device used for converting mechanical energy into electrical energy is called a/an (a) cell (b) transformer (c) dynamo (d) electric motor

Description : The device used for converting mechanical energy into electrical energy is called a/an (a) cell (b) transformer (c) dynamo (d) electric motor

Last Answer : Ans:(c)

Which of the following devices converts electrical energy into mechanical energy? (a) Dynamo (b) Transformer (c) Electric motor (d) Inductor

Description : Which of the following devices converts electrical energy into mechanical energy? (a) Dynamo (b) Transformer (c) Electric motor (d) Inductor

Last Answer : Ans:(c)

A dynamo is a device which – (1) creates mechanical energy (2) creates electrical energy (3) converts mechanical energy into electrical energy (4) converts electrical energy into mechanical energy

Description : A dynamo is a device which – (1) creates mechanical energy (2) creates electrical energy (3) converts mechanical energy into electrical energy (4) converts electrical energy into mechanical energy

Last Answer : (3) converts mechanical energy into electrical energy Explanation: A dynamo is an electrical generator that produces direct current with the use of a commutator. Dynamos were the first electrical ... based, including the electric motor, the alternating-current alternator, and the rotary converter.

Dynamo is a device for converting – (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Description : Dynamo is a device for converting – (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Last Answer : (2) Mechanical energy into electrical energy Explanation: A dynamo is a device for converting mechanical energy into electrical energy, esp. one that produces direct current. A dynamo is an ... were based, including the electric motor, the alternating-current alternator, and the rotary converter.

A dynamo is a device which – (1) creates mechanical energy (2) creates electrical energy (3) converts mechanical energy into electrical energy (4) converts electrical energy into mechanical energy

Description : A dynamo is a device which – (1) creates mechanical energy (2) creates electrical energy (3) converts mechanical energy into electrical energy (4) converts electrical energy into mechanical energy

Last Answer : (3) converts mechanical energy into electrical energy Explanation: A dynamo is an electrical generator that produces direct current with the use of a commutator. Dynamos were the first electrical ... based, including the electric motor, the alternating-current alternator, and the rotary converter.

Dynamo is a device for converting – (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Description : Dynamo is a device for converting – (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Last Answer : (2) Mechanical energy into electrical energy Explanation: A dynamo is a device for converting mechanical energy into electrical energy, esp. one that produces direct current. A dynamo is an ... were based, including the electric motor, the alternating-current alternator, and the rotary converter.

A dynamo converts ______. (1) Mechanical energy into sound energy (2) Mechanical energy into electrical energy (3) Electrical energy into mechanical energy (4) None of these

Description : A dynamo converts ______. (1) Mechanical energy into sound energy (2) Mechanical energy into electrical energy (3) Electrical energy into mechanical energy (4) None of these

Last Answer : (2) Mechanical energy into electrical energy Explanation The dynamo, by attaching it in between the two tires, converts the mechanical energy (which of course, is produced by paddling) into electrical energy, and by connecting the wires going out of the dynamo to light, it glows without any flaw.

The Dynamo converts – (1) Electrical Energy into Mechanical Energy (2) Mechanical Energy into Magnetic Energy (3) None of these (4) Mechanical Energy into Electrical Energy

Description : The Dynamo converts – (1) Electrical Energy into Mechanical Energy (2) Mechanical Energy into Magnetic Energy (3) None of these (4) Mechanical Energy into Electrical Energy

Last Answer : (4) Mechanical Energy into Electrical Energy Explanation: Dynamo is a device for converting mechanical energy into electrical energy, especially one that produces direct current. It uses electromagnetic ... mechanical rotation into a pulsing direct electric current through the use of a commutator.

The dynamo converts – (1) mechanical energy into electrical energy (2) electrical energy into mechanical energy (3) mechanical energy into magnetic energy (4) magnetic energy into mechanical energy

Description : The dynamo converts – (1) mechanical energy into electrical energy (2) electrical energy into mechanical energy (3) mechanical energy into magnetic energy (4) magnetic energy into mechanical energy

Last Answer : (1) mechanical energy into electrical energy

A dynamo is used to convert – (1) mechanical energy into electrical energy (2) electrical energy into mechanical energy (3) electrical energy into magnetic energy (4) magnetic energy into mechanical energy

Description : A dynamo is used to convert – (1) mechanical energy into electrical energy (2) electrical energy into mechanical energy (3) electrical energy into magnetic energy (4) magnetic energy into mechanical energy

Last Answer : (1) mechanical energy into electrical energy Explanation: A dynamo converts mechanical energy into electrical energy by taking advantage of a phenomenon known as electromagnetic induction. It is an electric generator that is similar to those that provide electricity to our homes.

The dynamo is a device for converting (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) None of these

Description : The dynamo is a device for converting (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) None of these

Last Answer : (2) Mechanical energy into electrical energy

The Dynamo converts (1) Electrical Energy into Mechanical Energy (2) Mechanical Energy into Magnetic Energy (3) None of these (4) Mechanical Energy into Electrical Energy

Description : The Dynamo converts (1) Electrical Energy into Mechanical Energy (2) Mechanical Energy into Magnetic Energy (3) None of these (4) Mechanical Energy into Electrical Energy

Last Answer : Mechanical Energy into Electrical Energy

The dynamo converts (1) mechanical energy into electrical energy (2) electrical energy into mechanical energy (3) mechanical energy into magnetic energy (4) magnetic energy into mechanical energy

Description : The dynamo converts (1) mechanical energy into electrical energy (2) electrical energy into mechanical energy (3) mechanical energy into magnetic energy (4) magnetic energy into mechanical energy

Last Answer : mechanical energy into electrical energy

A dynamo is used to convert (1) mechanical energy into electrical energy (2) electrical energy into mechanical energy (3) electrical energy into magnetic energy (4) magnetic energy into mechanical energy

Description : A dynamo is used to convert (1) mechanical energy into electrical energy (2) electrical energy into mechanical energy (3) electrical energy into magnetic energy (4) magnetic energy into mechanical energy

Last Answer : mechanical energy into electrical energy

A dynamo is a device which (1) creates mechanical energy (2) creates electrical energy (3) converts mechanical energy into electrical energy (4) converts electrical energy into mechanical energy

Description : A dynamo is a device which (1) creates mechanical energy (2) creates electrical energy (3) converts mechanical energy into electrical energy (4) converts electrical energy into mechanical energy

Last Answer :  converts mechanical energy into electrical energy

Dynamo is a device for converting (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Description : Dynamo is a device for converting (1) Heat energy into electrical energy (2) Mechanical energy into electrical energy (3) Magnetic energy into electrical energy (4) Chemical energy into electrical energy

Last Answer : Mechanical energy into electrical energy

The hp available at the crank shaft which is measured by a suitable dynamo meter is called 1. IMEP 2. BHP 3. Both 1 and 2 4. none of these

Description : The hp available at the crank shaft which is measured by a suitable dynamo meter is called 1. IMEP 2. BHP 3. Both 1 and 2 4. none of these

Last Answer : <!-- [if !supportLists] -->1.   <!-- [endif] -->ans 2