A flasher circuit application is a : -

A flasher circuit application is a : - 

a) Safety blinkers for bicycles c) Street Light Control  b) Rides lighting d) Glow lamp
by

1 Answer

Answer :

A flasher circuit application is a : - Safety blinkers for bicycles 

by

Related questions

Where is the turn signal flasher located on a 1993 Nissan pickup?

Description : Where is the turn signal flasher located on a 1993 Nissan pickup?

Last Answer : Under the dash, directly above the clutch pedal arm and attached to the brake support bracket.

Where is turn signal flasher located on 2004 f650?

Description : Where is turn signal flasher located on 2004 f650?

Last Answer : Need answer

Where is the flasher relay located on a 2005 379 peterbilt you tube?

Description : Where is the flasher relay located on a 2005 379 peterbilt you tube?

Last Answer : Need answer

Where is the turn signal flasher location on the 1995 Lincoln town car?

Description : Where is the turn signal flasher location on the 1995 Lincoln town car?

Last Answer : TO THE BEST OF MY KNOWLEDGE THERE IS NO PLUG-IN FLASHER BASE FORREPLACEMENT. IT IS IN THE ELECTRONICS MODULE LOCATED JUST TO THELEFT OF THE ASH TRAY PULL OUT, DOWN TOWARDS THE BOTTOM OF THE DASH. ... the unit alittle time to dry, I plugged the 2 harnesses in back in, andeverything worked like new.

Where is the turn signal flasher on a 2001 Kia Rio?

Description : Where is the turn signal flasher on a 2001 Kia Rio?

Last Answer : Feel Free to Answer

Where is the flasher unit 92 Toyota estima?

Description : Where is the flasher unit 92 Toyota estima?

Last Answer : What is the answer ?

Where is turn signal flasher located in 2015 Toyota Highlander?

Description : Where is turn signal flasher located in 2015 Toyota Highlander?

Last Answer : Need answer

In a cartridge-type fuse, the metal element is contained in a ___________________. A. porcelain window B. thermal cut out C. fiber tube D. flasher device

Description : In a cartridge-type fuse, the metal element is contained in a ___________________. A. porcelain window B. thermal cut out C. fiber tube D. flasher device

Last Answer : Answer: C

If you are required to monitor the speed of a device with a stroboscope over an extended period of time, what step should be taken to prolong the life of the flasher tube?

Description : If you are required to monitor the speed of a device with a stroboscope over an extended period of time, what step should be taken to prolong the life of the flasher tube?

Last Answer : Monitor a submultiple frequency to prolong the flasher-tube life.

State the following, 1) Position of head light 2) Supply voltage for flasher light 3) Colours used for marker light 4) Frequencies for engine horn.

Description : State the following, 1) Position of head light 2) Supply voltage for flasher light 3) Colours used for marker light 4) Frequencies for engine horn. 

Last Answer : Ans: 1) Position of head light: Head light is located at center near roof level. 2) Supply voltage for flasher light: Nominal 110 V. dc, range 70 V to 140 V. 3) Colours used for marker light: ... indicates parking light 4) Frequencies for engine horn: For HT horn - 660 Hz For LT horn - 330 Hz

Sampling theory finds its application in: -

Description :  Sampling theory finds its application in: -  a) Amplitude Modulation b) Frequency Modulation c) PCM d) Phase Modulation

Last Answer :  Sampling theory finds its application in: - PCM 

What is the line current of a circuit when the current transformer of 1000 : 5 rating measures 4 amp?

Description : What is the line current of a circuit when the current transformer of 1000 : 5 rating measures 4 amp? (A) 5000 amp (B) 1000 amp (C) 400 amp (D) 800 amp 

Last Answer : What is the line current of a circuit when the current transformer of 1000 : 5 rating measures 4 amp? (A) 5000 amp (B) 1000 amp (C) 400 amp (D) 800 amp 

A 0 -10 mAPMMC ammeter reads 5 mA in a circuit; its bottom control spring snaps out suddenly the meter ...

Description :  A 0 -10 mAPMMC ammeter reads 5 mA in a circuit; its bottom control spring snaps out suddenly the meter will now read:- a) 5 mA b) 10 mA c) 2.5 mA d). 0

Last Answer :  A 0 -10 mAPMMC ammeter reads 5 mA in a circuit; its bottom control spring snaps out suddenly the meter will now read:- 0

The Q factor of a coil at resonant frequency 1.5 MHz of an RLC series circuit is 150. The Bandwidth is : -

Description : The Q factor of a coil at resonant frequency 1.5 MHz of an RLC series circuit is 150. The Bandwidth is : - a) 225 MHz b) 1.06 MHz c) 10 KHz d) 10 MHz

Last Answer : The Q factor of a coil at resonant frequency 1.5 MHz of an RLC series circuit is 150. The Bandwidth is : - 10 KHz

When measuring strain, ballast circuit use a capacitor to act as a high pass filter. This is done when:

Description : When measuring strain, ballast circuit use a capacitor to act as a high pass filter. This is done when:  a) Static strain are being measured b) Dynamic strain are being measured c) Both Static and dynamic strain are being measured d) None of the above

Last Answer : When measuring strain, ballast circuit use a capacitor to act as a high pass filter. This is done when: Dynamic strain are being measured

When a pure inductor is connected in series with a lamp circuit, effect is: -

Description : When a pure inductor is connected in series with a lamp circuit, effect is: -  a) Dimmer b) Brighter c) Same d) Fused

Last Answer : When a pure inductor is connected in series with a lamp circuit, effect is: -  Dimmer 

Which of these represent short in a series circuit?

Description :  Which of these represent short in a series circuit?  a) Increase in resistance b) Increase in current c) Increase in voltage d) Increase in conductance

Last Answer :  Which of these represent short in a series circuit?  Increase in current

Which one of the following frequency meter is suitable for measuring radio frequency?

Description : Which one of the following frequency meter is suitable for measuring radio frequency?   (a) Vibrating reed frequency meter (b) Weston frequency meter (c) Electrical resonance frequency meter (d) Heterodyne frequency meter 

Last Answer : Which one of the following frequency meter is suitable for measuring radio frequency?   (a) Vibrating reed frequency meter (b) Weston frequency meter (c) Electrical resonance frequency meter (d) Heterodyne frequency meter 

Which of the following factors limit the deflection of the pointer of a PMMC instrument of about

Description : Which of the following factors limit the deflection of the pointer of a PMMC instrument of about 90o?  1. Its damping mechanism  2. Linearity of magnetic field in which the coil moves  3. Control spring arrangement  4. ... Only 1 and 3 (b) Only 2 and 4 (c) Only 2 and 3 (d) Only 1 and 4 

Last Answer : Which of the following factors limit the deflection of the pointer of a PMMC instrument of about 90o?  1. Its damping mechanism  2. Linearity of magnetic field in which the coil moves  3. Control spring arrangement  4. ... Only 1 and 3 (b) Only 2 and 4 (c) Only 2 and 3 (d) Only 1 and 4 

Torque/weight ratio of an instrument indicates

Description : Torque/weight ratio of an instrument indicates   (a) Selectivity (b) Accuracy (c) Fidelity (d) Sensitivity

Last Answer : Torque/weight ratio of an instrument indicates Sensitivity

Wagner's earth devices are used in AC bridge circuits for

Description : Wagner's earth devices are used in AC bridge circuits for (a) Eliminating the effect of earth capacitances (b) Eliminating the effect of intercomponent capacitances (c) Eliminating the effect of stray electrostatic fields (d) Shielding the bridge elements

Last Answer : Wagner's earth devices are used in AC bridge circuits for Eliminating the effect of earth capacitances

Loading effect is principally caused by instruments

Description : Loading effect is principally caused by instruments   (a) High resistance (b) Low sensitivity (c) High sensitivity (d) High range

Last Answer : B

Thermocouple instruments can be used for a frequency range upto

Description : Thermocouple instruments can be used for a frequency range upto   (a) 100Hz (b) 5000 Hz (c) 1 MHz (d) 50 MHz and above 

Last Answer : Thermocouple instruments can be used for a frequency range upto 50 MHz and above 

In a single phase induction energy meter, in order to obtain true value of energy, the shunt

Description : In a single phase induction energy meter, in order to obtain true value of energy, the shunt magnetic flux should lag behind the applied voltage by   (a) 90o (b) 0o (c) 45o (d) 60o

Last Answer : In a single phase induction energy meter, in order to obtain true value of energy, the shunt magnetic flux should lag behind the applied voltage by 90o

Gearing, blacklash, friction between moving parts and scale accuracies are generally known as

Description : Gearing, blacklash, friction between moving parts and scale accuracies are generally known as  (a) Instrument errors (b) Interference errors (c) Calibration errors (d) Interaction errors

Last Answer : Gearing, blacklash, friction between moving parts and scale accuracies are generally known as Instrument errors

If the distance of screen from a CRT to center of deflection plates is 15 cm, the length of

Description : If the distance of screen from a CRT to center of deflection plates is 15 cm, the length of deflection plates is 2 cm, the distance between the plates is 1 cm and accelerating voltage is 500 V, deflection sensitivity is   (a) 33.2 V/cm (b) 0.03 cm/V (c) 66.4 V/cm (d) 0.015 cm/V

Last Answer : If the distance of screen from a CRT to center of deflection plates is 15 cm, the length of deflection plates is 2 cm, the distance between the plates is 1 cm and accelerating voltage is 500 V, deflection sensitivity is 0.03 cm/V

The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is

Description : The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is 1200 rev/kWh. Power consumption in the load is (A) 1.2 kW (B) 1 kW (C) 600 W (D) 500 W

Last Answer : The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is 1200 rev/kWh. Power consumption in the load is 500 W

The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is

Description : The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is (A) 11% (B) 9% (C) 1.1% (D) 3%

Last Answer : The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is 11%

If stator field is rotating in clockwise direction rotor rotates in

Description : If stator field is rotating in clockwise direction rotor rotates in (A) any direction (B) cannot predict (C) anticlockwise (D) clockwise 

Last Answer : If stator field is rotating in clockwise direction rotor rotates in clockwise 

What is the vector location of TRAP interrupt?

Description : What is the vector location of TRAP interrupt? (A) 0000 h (B) 0008 h (C) 0014 h (D) 0024 h

Last Answer : What is the vector location of TRAP interrupt?  0024 h

An amplifier has a voltage gain of 50; this gain in dB will be

Description : An amplifier has a voltage gain of 50; this gain in dB will be (A) 34 dB (B) 68 dB (C) 41 dB (D) 14 dB 

Last Answer : An amplifier has a voltage gain of 50; this gain in dB will be 34 dB

Converter is a device for transforming

Description : Converter is a device for transforming (A) ac to dc (B) dc to dc (C) dc to ac (D) ac to ac

Last Answer : Converter is a device for transforming ac to ac

The input frequency is 50 Hz. The ripple frequency in a 12 phase full wave rectifier is

Description : The input frequency is 50 Hz. The ripple frequency in a 12 phase full wave rectifier is (A) 1200 Hz (B) 600 Hz (C) 100 Hz (D) 50 Hz 

Last Answer : The input frequency is 50 Hz. The ripple frequency in a 12 phase full wave rectifier is 1200 Hz

The grid in triodes is made in the form of

Description : The grid in triodes is made in the form of (A) mesh (B) metal strip (C) metallic cylinder (D) single filament wire 

Last Answer : The grid in triodes is made in the form of mesh

The 555 timer can be used in which of the following configurations ?

Description : The 555 timer can be used in which of the following configurations ?  a) astable, monostable b) monostable, bistable c) astable, toggled d) bistable, tristable

Last Answer : The 555 timer can be used in astable, monostable configurations.

The dc current through each diode in a bridge rectifier equals : -

Description : The dc current through each diode in a bridge rectifier equals : - a) the load current b) half the dc load current c) twice the dc load current d) one-fourth the dc load current

Last Answer : The dc current through each diode in a bridge rectifier equals : - the load current

Intrinsic semiconductor material is characterized by a valence shell of how many electrons?

Description : Intrinsic semiconductor material is characterized by a valence shell of how many electrons? a) 1 b) 2 c) 4 d) 6

Last Answer : Intrinsic semiconductor material is characterized by a valence shell of 4 electrons.

Sample -and -hold circuits in ADCs are designed to : -

Description : Sample -and -hold circuits in ADCs are designed to : - a) sample and hold the output of the binary counter during the conversion process b) stabilize theAD Cs threshold c) voltage ... d) signal during the conversion process sample and hold the ADC staircase waveform during the conversion process

Last Answer : Sample -and -hold circuits in ADCs are designed to : - voltage during the conversion process stabilize the input analog 

Base 10 refers to which number system?

Description : Base 10 refers to which number system? a) binary coded decimal b) decimal c) octal d) hexadecimal

Last Answer : Base 10 refers to decimal number system.

A basic S -R flip-flop can be constructed by cross -coupling which basic logic gates : -

Description : A basic S -R flip-flop can be constructed by cross -coupling which basic logic gates : - a) AND or OR gates b) XOR or XNOR gates c) NOR or NAND gates d) AND or NOR gates

Last Answer : A basic S -R flip-flop can be constructed by cross -coupling which basic logic gates : - NOR or NAND gates

A zero -level detector is a -

Description : A zero -level detector is a - a) comparator with a sine wave output b) comparator with a trip point referenced to zero c) peak detector d) limiter

Last Answer : A zero -level detector is a - comparator with a trip point referenced to zero

A single transistor can be used to build which of the following digital logic gates : -

Description : A single transistor can be used to build which of the following digital logic gates : - a) AND gates b) OR gates c) NOT gates d) NAND gates

Last Answer : a

The maximum phase lead is contributed by a phase lead network at: -

Description : The maximum phase lead is contributed by a phase lead network at: - a) mid corner frequency b) lower corner frequency c) upper corner frequency d) phase corner frequency

Last Answer : The maximum phase lead is contributed by a phase lead network at: -  mid corner frequency

With a 12 V supply, a silicon diode, and a 370 - ohm resistor in series, what voltage will be dropped across...

Description : With a 12 V supply, a silicon diode, and a 370 - ohm resistor in series, what voltage will be dropped across the diode? a) 0.3V b) 0.7V c) 0.9V d) 1.4V

Last Answer : 0.7V

Which of the following describes the operation of a positive edge - triggered D -type flip-flop?

Description : Which of the following describes the operation of a positive edge - triggered D -type flip-flop? a) if both inputs are HIGH, the output will toggle b) the output will follow the input on the leading ... on the leading edge of the clock and is passed to the output on the trailing edge of the clock.

Last Answer : Which of the following describes the operation of a positive edge - triggered D -type flip-flop?   the output will follow the input on the leading edge of the clock

The polarity of induced voltage while a field is collapsing is : -

Description : The polarity of induced voltage while a field is collapsing is : - a) independent of the force creating the field b) opposite to the force creating c) the field identical to the force creating d) the field present only if the force is stationary

Last Answer : The polarity of induced voltage while a field is collapsing is : - opposite to the force creating

The basic logic gate whose output is the complement of the input is the: -

Description : The basic logic gate whose output is the complement of the input is the: - a) OR gate b) AND gate c) inverter d) comparator

Last Answer : The basic logic gate whose output is the complement of the input is the: -  inverter

The output of an AND gate with three inputs, A, B and C, is HIGH when________.

Description : The output of an AND gate with three inputs, A, B and C, is HIGH when __________. a) A=1,B=1,C=0 b) A= 0,B= 0,C= 0 ' c) A=1,B=1,C=1 d) A=1,B= 0,C= 1

Last Answer : Sahara theme port n a n d Gate if two input Array Logic 0 the output is dash

Convert hexadecimal value 16 to decimal: -

Description : Convert hexadecimal value 16 to decimal: - a) 2210 b) 1610 c) 1010 d) 2010

Last Answer : Convert hexadecimal value 16 to decimal: - 2210

How many bits are needed to address 64 K memory: -

Description : How many bits are needed to address 64 K memory: - a) 3 b) 10 c) 16 d) 32

Last Answer : How many bits are needed to address 64 K memory: - 16