Super heater

Super heater
by

1 Answer

Answer :

Super heater: Its purpose is to super heat steam and is a type of heat exchanger in which steam flows inside tubes and hot gases surround it 


Fusible plug: It is a safety device used for preventing the level of water from going down below a critical point and thus avoids overheating. Fusible plug is mounted at crown plate of combustion chamber.

by

Related questions

State the function of super heater of a thermal power plant.

Description : State the function of super heater of a thermal power plant. 

Last Answer : Function of Super heater: -  Its function is to increase the temperature of steam by absorbing heat from exhausted hot flue gases.

State necessity of super heater in steam boilers. State advantages of economizer.

Description : State necessity of super heater in steam boilers. State advantages of economizer. 

Last Answer : Necessity of super heater in steam boilers: 1. The efficiency of the boiler is increase with the use of superheated steam. 2. It eliminates the erosion of the turbine blades. 3. It reduces ... water. 5. This unit improves the overall efficiency of the boiler by reducing the fuel consumption. 

Explain the working of super heater

Description : Explain the working of super heater

Last Answer : Working of Super heater: Superheater header mounted against the tube sheet in the smoke box.The steam is then passed through a number of superheater elements-long pipes which are placed inside special, ... into a separate compartment of the super heater header and then to the cylinders as normal. 

State the location and function of i) Economizer ii) Feed water heater.

Description : State the location and function of i) Economizer ii) Feed water heater.

Last Answer : (i) Economizer:-  Location: - It is placed in the path of flue gases in between the exit from the furnace and the chimney. OR In The way of feed water before boiler. Function: - ... economizer. Function: - Its function is to increase the temperature of feed water by using blade steam.

Write the functions of re-heater in steam plant.

Description : Write the functions of re-heater in steam plant.

Last Answer : Functions of re-heater:- In Re-heater temperature of exhausted steam from HP turbine is increased by passing exhausted steam again to boiler.

If a 220 V heater is used on 110 V supply, the heat produced by it will be nearly

Description : If a 220 V heater is used on 110 V supply, the heat produced by it will be nearly (a) one half (b) twice (c) one-fourth (d) four times 

Last Answer : If a 220 V heater is used on a 110 V supply, the heat produced by it will be significantly less than it would be if it were used on a 220 V supply. This is because the heater is designed to operate ... the heater, but it will be significantly less than it would be if it were used on a 220 V supply.

The energy used by a 1.5kW heater in 5 minutes is:

Description : The energy used by a 1.5kW heater in 5 minutes is:

Last Answer : The energy used by a 1.5 kW heater in 5 minutes is: 450000 J

A 1000W heater is rated to operate at a direct current (DC) of 10A. If the heater is supplied alternating

Description : A 1000W heater is rated to operate at a direct current (DC) of 10A. If the heater is supplied alternating current (AC) for producing the same quantity of heat the value of current should be  a. Iav=10A b. Irms=10A c. Ipeak=10A 

Last Answer : A 1000W heater is rated to operate at a direct current (DC) of 10A. If the heater is supplied alternating current (AC) for producing the same quantity of heat the value of current should be Irms=10A

A 1000 watts heater is connected to a 240 V AC Supply. Then the current drawn by the heater is

Description : A 1000 watts heater is connected to a 240 V AC Supply. Then the current drawn by the heater is

Last Answer : A 1000 watts heater is connected to a 240 V AC Supply. Then the current drawn by the heater is 4.166 amperes

A heater takes 4 Amp at 250 volts. How much power does it consume?

Description : A heater takes 4 Amp at 250 volts. How much power does it consume? A. 1 KWatt B. 2 KWatt C. 3 KWatt D. 4 KWatt 

Last Answer : Power= voltage* current             = 4 * 250             = 1000 watts             = 1KW

An electric heater draws 3.5 A from a 110 V source. The resistance of the heating element is approximately...

Description : An electric heater draws 3.5 A from a 110 V source. The resistance of the heating element is approximately equal to: A. 385Ω B. 38.5Ω C. 3.1Ω D. 31Ω

Last Answer : An electric heater draws 3.5 A from a 110 V source. The resistance of the heating element is approximately equal to: 31Ω

A nichrome wire used as heater coil has the resistance of 1 ohm/m. For ...

Description : A nichrome wire used as heater coil has the resistance of 1 ohm/m. For a heater of 1000 W at 200 V, the length of wire required will be 

Last Answer : A nichrome wire used as heater coil has the resistance of 1 ohm/m. For a heater of 1000 W at 200 V, the length of wire required will be 40 m.

The element of electric heater is made of

Last Answer : The element of electric heater is made of nichrome.

A heater is rated as 230 V, 10 kW, A.C. The value 230 V refers to?

Last Answer : A heater is rated as 230 V, 10 kW, A.C. The value 230 V refers to r.m.s. voltage.