Which of the following low melting alloy containing bismuth and lead is used for electric fuse? (A) Wood's metal (B) Babbitt metal (C) Monel metal (D) Duralumin

Which of the following low melting alloy containing bismuth and lead
is used for electric fuse?
(A) Wood's metal
(B) Babbitt metal
(C) Monel metal
(D) Duralumin
by

1 Answer

Answer :

Option A
by

Related questions

Which of the following alloys does not contain nickel? (A) Chlorinet - 2 alloy (B) Monel (C) Inconel (D) Babbitt metal

Description : Which of the following alloys does not contain nickel? (A) Chlorinet - 2 alloy (B) Monel (C) Inconel (D) Babbitt metal

Last Answer : (D) Babbitt metal

Which of the following alloys does not contain nickel? (A) Chloro, et-2 alloy (B) Monel (C) Inconel (D) Babbitt metal

Description : Which of the following alloys does not contain nickel? (A) Chloro, et-2 alloy (B) Monel (C) Inconel (D) Babbitt metal

Last Answer : (D) Babbitt metal

Which of the following is a light alloy? (A) Monel metal (B) Dow metal (C) German silver (D) Babbitt meta

Description : Which of the following is a light alloy? (A) Monel metal (B) Dow metal (C) German silver (D) Babbitt meta

Last Answer : (B) Dow metal

The part of a fuse that melts and opens the circuit is made of _____________. A. copper and antimony B. steel and babbitt C. aluminum or beryllium alloy D. zinc or an alloy of tin and lead

Description : The part of a fuse that melts and opens the circuit is made of _____________. A. copper and antimony B. steel and babbitt C. aluminum or beryllium alloy D. zinc or an alloy of tin and lead

Last Answer : Answer: D

Metallic surveying tapes are made of __________ which has a low co efficient of expansion & enough strength. (A) Invar (B) Hastelloy (C) Duralumin (D) Monel metal

Description : Metallic surveying tapes are made of __________ which has a low co efficient of expansion & enough strength. (A) Invar (B) Hastelloy (C) Duralumin (D) Monel metal

Last Answer : (A) Invar

. Age hardening is connected with (A) Babbitt metal (B) Gun metal (C) Stainless steel (D) Duralumin

Description : . Age hardening is connected with (A) Babbitt metal (B) Gun metal (C) Stainless steel (D) Duralumin

Last Answer : D) Duralumin

Nickel is a constituent of (A) Bronze (B) Solder (C) Duralumin (D) Monel metal

Description : Nickel is a constituent of (A) Bronze (B) Solder (C) Duralumin (D) Monel metal

Last Answer : (D) Monel metal

Evaporators used in caustic soda recovery and production plant are made of (A) Monel metal(B) Gun metal(C) Wood metal(D) Babbitt metal

Description : Evaporators used in caustic soda recovery and production plant are made of (A) Monel metal (B) Gun metal (C) Wood metal (D) Babbitt metal

Last Answer : (A) Monel metal

Babbitt metal is not a (A) Tin base alloy (B) White metal (C) Lead base alloy (D) Pure metal

Description : Babbitt metal is not a (A) Tin base alloy (B) White metal (C) Lead base alloy (D) Pure metal

Last Answer : (D) Pure metal

Babbitt metal used for bearings is a _________base alloy. (A) Tin (B) Lead (C) Aluminium (D) Copper

Description : Babbitt metal used for bearings is a _________base alloy. (A) Tin (B) Lead (C) Aluminium (D) Copper

Last Answer : (A) Tin

Type metal used in printing press is an alloy of - (1) lead and copper (2) lead and antimony (3) lead and bismuth (4) lead and zinc

Description : Type metal used in printing press is an alloy of - (1) lead and copper (2) lead and antimony (3) lead and bismuth (4) lead and zinc

Last Answer : (2) lead and antimony Explanation: Lead and antimony are used to make type metals alloy. These type metals are used to make the character produced durable and tough.

Type metal used in printing press is an alloy of – (1) lead and copper (2) lead and antimony (3) lead and bismuth (4) lead and zinc

Description : Type metal used in printing press is an alloy of – (1) lead and copper (2) lead and antimony (3) lead and bismuth (4) lead and zinc

Last Answer : (2) lead and antimony Explanation: In printing, type metal (sometimes called hot metal) refers to the metal alloys used in traditional type founding and hot metal typesetting. Lead is the main ... make castings with sharp details because molten lead shrinks and sags when it cools to a solid.

Type metal used in printing press is an alloy of (1) lead and copper (2) lead and antimony (3) lead and bismuth (4) lead and zinc

Description : Type metal used in printing press is an alloy of (1) lead and copper (2) lead and antimony (3) lead and bismuth (4) lead and zinc

Last Answer :  lead and antimony

Since fuse elements are made of zinc or any alloy of tin and lead, the melting point of the fuse element must be _____________. A. higher than that of copper B. lower than that of copper C. equal to that of copper D. reached when the conductor it is protecting becomes 'white hot.'

Description : Since fuse elements are made of zinc or any alloy of tin and lead, the melting point of the fuse element must be _____________. A. higher than that of copper B. lower than that of copper C. equal to that of copper D. reached when the conductor it is protecting becomes 'white hot.'

Last Answer : Answer: B

Which of the following is not a nickel based alloy? (A) Inconel (B) Hastelloys (C) Nimonics (D) Babbitt metal

Description : Which of the following is not a nickel based alloy? (A) Inconel (B) Hastelloys (C) Nimonics (D) Babbitt metal

Last Answer : (D) Babbitt metal

Out of the following, the alloy which has equal percentage of constituents, is (A) White metal (B) Gun metal (C) Duralumin (D) Constantan

Description : Out of the following, the alloy which has equal percentage of constituents, is (A) White metal (B) Gun metal (C) Duralumin (D) Constantan

Last Answer : Option D

Which of the following is not a copper based alloy with nickel? (A) German silver (B) Monel metal (C) Inconel (D) Constantan

Description : Which of the following is not a copper based alloy with nickel? (A) German silver (B) Monel metal (C) Inconel (D) Constantan

Last Answer : (C) Inconel

Monel metal is an alloy of (A) Molybdenum and nickel (B) Nickel and copper (C) Molybdenum and aluminium (D) Molybdenum and zinc

Description : Monel metal is an alloy of (A) Molybdenum and nickel (B) Nickel and copper (C) Molybdenum and aluminium (D) Molybdenum and zinc

Last Answer : (B) Nickel and copper

Electric fuse is an alloy of – (1) tin and lead (2) zinc and lead (3) copper and iron (4) carbon and tin

Description : Electric fuse is an alloy of – (1) tin and lead (2) zinc and lead (3) copper and iron (4) carbon and tin

Last Answer : (1) tin and lead Explanation: Electric fuse is an alloy of tin and lead.

Electric fuse is an alloy of (1) tin and lead (2) zinc and lead (3) copper and iron (4) carbon and tin

Description : Electric fuse is an alloy of (1) tin and lead (2) zinc and lead (3) copper and iron (4) carbon and tin

Last Answer :  tin and lead

Babbitt metal (used for making bearings) comprises of (A) Mainly tin (85%) and lead (B) Saw dust and iron dust mixture (C) Zinc and aluminium (D) Copper and aluminium

Description : Babbitt metal (used for making bearings) comprises of (A) Mainly tin (85%) and lead (B) Saw dust and iron dust mixture (C) Zinc and aluminium (D) Copper and aluminium

Last Answer : (A) Mainly tin (85%) and lead

Which of the following is not an alloy of nickel and chromium? (A) Inconel (B) Hastelloy (C) Nimonic alloys (D) Duralumin

Description : Which of the following is not an alloy of nickel and chromium? (A) Inconel (B) Hastelloy (C) Nimonic alloys (D) Duralumin

Last Answer : (D) Duralumin

Duralumin is an alloy of (A) Aluminium, copper and manganese (B) Aluminium, nickel and silicon (C) Aluminium and nickel (D) None of these

Description : Duralumin is an alloy of (A) Aluminium, copper and manganese (B) Aluminium, nickel and silicon (C) Aluminium and nickel (D) None of these

Last Answer : (A) Aluminium, copper and manganese

Light weight metallic alloy used in aircraft industry is (A) Aluminium (B) High silicon (14%) iron (C) Duralumin

Description : Light weight metallic alloy used in aircraft industry is (A) Aluminium (B) High silicon (14%) iron (C) Duralumin

Last Answer : (C) Duralumin

Which of the following is universally employed as the low expansion metal in the bimetallic thermometer, which is an iron-nickel alloy containing 36% nickel and has very low co-efficient of expansion (1/20th of ordinary metals) ? (A) Invar (B) Constantan (C) Chromel (D) Alumel

Description : Which of the following is universally employed as the low expansion metal in the bimetallic thermometer, which is an iron-nickel alloy containing 36% nickel and has very low co-efficient of expansion (1/20th of ordinary metals) ? (A) Invar (B) Constantan (C) Chromel (D) Alumel

Last Answer : (A) Invar

Lead pipe is (A) Especially resistant to solutions containing H2SO4 (B) Usually joined by burning (e.g. by melting to adjacent pieces with a torch) (C) Having very low elastic limit resulting in permanent deformation from either mechanical or thermal strain (D) All (A), (B) and (C)

Description : Lead pipe is (A) Especially resistant to solutions containing H2SO4 (B) Usually joined by burning (e.g. by melting to adjacent pieces with a torch) (C) Having very low elastic limit resulting in permanent deformation from either mechanical or thermal strain (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C

Safety fuse wire used in domestic electrical appliances is made of metal of low (1) Resistance (2) Melting point (3) Specific gravity (4) Conductance

Description : Safety fuse wire used in domestic electrical appliances is made of metal of low (1) Resistance (2) Melting point (3) Specific gravity (4) Conductance

Last Answer : (2) Melting point Explanation: The fuse wire is based on the Joules law of heating which says that when the electric current is allowed to pass through a conductor, the conductor heats up and is ... . For this purpose the material used as fuse wire should have high resistance and low melting point.

Safety fuse wire used in domestic electrical appliances is made of metal of low (1) Resistance (2) Melting point (3) Specific gravity (4) Conductance

Description : Safety fuse wire used in domestic electrical appliances is made of metal of low (1) Resistance (2) Melting point (3) Specific gravity (4) Conductance

Last Answer : Melting point

Babbitt metal used for making bearings should have (A) High co-efficient of friction between journal and bearing (B) Ability to retain lubricant on its surface (C) Low co-efficient of friction between journal and bearing (D) Both (B) & (C)

Description : Babbitt metal used for making bearings should have (A) High co-efficient of friction between journal and bearing (B) Ability to retain lubricant on its surface (C) Low co-efficient of friction between journal and bearing (D) Both (B) & (C)

Last Answer : (A) High co-efficient of friction between journal and bearing

Monel alloy is (A) The costliest of all the alloys of nickel (B) Not suitable for making kitchen utensils (C) Used for making steam valves and turbine blades as it resists steam attack at high temperature (D) Not used in cast and wrought forms

Description : Monel alloy is (A) The costliest of all the alloys of nickel (B) Not suitable for making kitchen utensils (C) Used for making steam valves and turbine blades as it resists steam attack at high temperature (D) Not used in cast and wrought forms

Last Answer : (C) Used for making steam valves and turbine blades as it resists steam attack at high temperature

Which of the following is an alloy of nickel and copper? (A) Hastelloy (B) Duriron (C) Monel (D) Inconel

Description : Which of the following is an alloy of nickel and copper? (A) Hastelloy (B) Duriron (C) Monel (D) Inconel

Last Answer : (C) Monel

Which of the following alloy is used in making magnet? (1) Duralumin (2) Stainless steel (3) Elniko (4) Magnalium

Description : Which of the following alloy is used in making magnet? (1) Duralumin (2) Stainless steel (3) Elniko (4) Magnalium

Last Answer : (3) Elniko Explanation: A magnetic alloy is a combination of various metals from the periodic table that contains at least one of the three main magnetic elements: iron (Fe), nickel (Ni), and cobalt (Co).

Duralumin is an alloy of?

Description : Duralumin is an alloy of?

Last Answer : Ans. Al+Cu+Mg+Mn

The alloy of aluminium used for making magnet is-----? A. Duralumin B. Y-Alloy C. Alnico (Answer) D. Aluminium bronze

Description : The alloy of aluminium used for making magnet is-----? A. Duralumin B. Y-Alloy C. Alnico (Answer) D. Aluminium bronze

Last Answer : C. Alnico (Answer)

Which of the following alloy is used in making magnet ? (1) Duralumin (2) Stainless steel (3) Elniko (4) Magnalium

Description : Which of the following alloy is used in making magnet ? (1) Duralumin (2) Stainless steel (3) Elniko (4) Magnalium

Last Answer : Elniko

Statement-I : Lead, tin and bismuth are purified by liquation method. Statement-II : Lead, tin and bismuth have low m.p as compared to impurities.

Description : Statement-I : Lead, tin and bismuth are purified by liquation method. Statement-II : Lead, tin and bismuth have low m.p as compared to impurities.

Last Answer : Statement-I : Lead, tin and bismuth are purified by liquation method. Statement-II : Lead, tin and bismuth have low m.p as compared to impurities.

(A) Led, tin and bismuth are purified by liquation method. (R ) Lead, tin and bismuth have low m.p. as compared to impuriites.

Description : (A) Led, tin and bismuth are purified by liquation method. (R ) Lead, tin and bismuth have low m.p. as compared to impuriites.

Last Answer : (A) Led, tin and bismuth are purified by liquation method. (R ) Lead, tin and bismuth have low m.p. as ... D. If (A) is incorrect but (R ) is correct

The commonly used safety fuse-wire is made of - (1) an alloy of Nickel and Lead (2) an alloy of Tin and Lead (3) an alloy of Tin and Nickel (4) an alloy of Lead and Iron

Description : The commonly used safety fuse-wire is made of - (1) an alloy of Nickel and Lead (2) an alloy of Tin and Lead (3) an alloy of Tin and Nickel (4) an alloy of Lead and Iron

Last Answer : (2) an alloy of Tin and Lead Explanation: As a rule, fuse elements of time delay fuses contain low melting point materials, e.g. tin (Sn) or zinc (Zn) and alloys thereof.

Fuse wire is made of an alloy of ______. (1) Lead and Copper (2) Tin and Copper (3) Tin and Lead (4) Copper and Silver

Description : Fuse wire is made of an alloy of ______. (1) Lead and Copper (2) Tin and Copper (3) Tin and Lead (4) Copper and Silver

Last Answer : (3) Tin and Lead Explanation: The material used for making fuse element has a low melting point such as tin, lead, or zinc.

Fuse wire is made of an alloy of – (1) Tin and Lead (2) Tin and Copper (3) Lead and Copper (4) Copper and Silver

Description : Fuse wire is made of an alloy of – (1) Tin and Lead (2) Tin and Copper (3) Lead and Copper (4) Copper and Silver

Last Answer : (1) Tin and Lead Explanation: The common material used as fuse wire is an alloy of tin and lead (63% tin and 37% lead). Fuse wires provide over current protection of an electrical circuit ... wire or strip that melts when too much current flows through it, thereby interrupting the flow of current.

A fuse wire is made of: (1) an alloy of tin and copper (2) an alloy of tin and lead (3) an alloy of tin and aluminium (4) an alloy of nickel and chromium

Description : A fuse wire is made of: (1) an alloy of tin and copper (2) an alloy of tin and lead (3) an alloy of tin and aluminium (4) an alloy of nickel and chromium

Last Answer : (2) an alloy of tin and lead Explanation: Electric fuse wire is an alloy made of tin (63 % lead 37 %. The cross sectional area determines the melting point at a certain current. Alloys (e.g. ... resulting combination of good conductivity (due to the tin) with a low melting point due to the lead).

Fuse wire is made of an alloy of (1) Tin and Lead (2) Tin and Copper (3) Lead and Copper (4) Copper and Silver

Description : Fuse wire is made of an alloy of (1) Tin and Lead (2) Tin and Copper (3) Lead and Copper (4) Copper and Silver

Last Answer : Tin and Lead

A fuse wire is made of: (1) an alloy of tin and copper (2) an alloy of tin and lead (3) an alloy of tin and aluminium (4) an alloy of nickel and chromium

Description : A fuse wire is made of: (1) an alloy of tin and copper (2) an alloy of tin and lead (3) an alloy of tin and aluminium (4) an alloy of nickel and chromium

Last Answer : an alloy of tin and lead

A metallic alloy in general as compared to their pure metal components is (A) More corrosion resistant (B) Having higher melting point (C) Having lower hardness, reactivity and fusibility (D) Having lower electrical conductivity

Description : A metallic alloy in general as compared to their pure metal components is (A) More corrosion resistant (B) Having higher melting point (C) Having lower hardness, reactivity and fusibility (D) Having lower electrical conductivity

Last Answer : (A) More corrosion resistant

Brazing filler metal used for joining steel plates (A) Melts below the melting points of base metals (B) Melts below 300°C (C) Is copper phosphorous alloy

Description : Brazing filler metal used for joining steel plates (A) Melts below the melting points of base metals (B) Melts below 300°C (C) Is copper phosphorous alloy

Last Answer : (A) Melts below the melting points of base metals

Babbitt metals used for making bearings are (A) Tin or lead based alloys (B) Short of antifrictional properties (C) Having homogenous microstructure (D) Yellow metals

Description : Babbitt metals used for making bearings are (A) Tin or lead based alloys (B) Short of antifrictional properties (C) Having homogenous microstructure (D) Yellow metals

Last Answer : (A) Tin or lead based alloys

__________ does not contain tin as an alloying material. (A) Brass (B) Pewter (C) Solder (D) Babbitt metal

Description : __________ does not contain tin as an alloying material. (A) Brass (B) Pewter (C) Solder (D) Babbitt metal

Last Answer : (A) Brass

The material of construction of bearings is (A) Cast iron (B) Babbitt metal (C) Pig iron (D) Steel

Description : The material of construction of bearings is (A) Cast iron (B) Babbitt metal (C) Pig iron (D) Steel

Last Answer : (B) Babbitt metal

The filament of an electric lamp becomes white hot but the lead-in wires holding the filament are only slightly heated because they (a) have smaller current passing through them (b) have very low resistance (c) have higher melting point (d) are made of black iron

Description : The filament of an electric lamp becomes white hot but the lead-in wires holding the filament are only slightly heated because they (a) have smaller current passing through them (b) have very low resistance (c) have higher melting point (d) are made of black iron

Last Answer : Ans:(b)

Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon

Description : Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon

Last Answer : (D) Plain carbon