A metallic alloy in general as compared to their pure metal components is (A) More corrosion resistant (B) Having higher melting point (C) Having lower hardness, reactivity and fusibility (D) Having lower electrical conductivity

A metallic alloy in general as compared to their pure metal components
is
(A) More corrosion resistant
(B) Having higher melting point
(C) Having lower hardness, reactivity and fusibility
(D) Having lower electrical conductivity
by

1 Answer

Answer :

(A) More corrosion resistant
by

Related questions

Nylon-66 compared to nylon-6 has (A) Lower melting point (B) More abrasion resistant properties (C) Higher hardness (D) All (A), (B) and (C)

Description : Nylon-66 compared to nylon-6 has (A) Lower melting point (B) More abrasion resistant properties (C) Higher hardness (D) All (A), (B) and (C)

Last Answer : (C) Higher hardness

Fats as compared to oils have (A) More unsaturated glycerides of fatty acids (B) Less unsaturated glycerides of fatty acids (C) Much higher reactivity to oxygen (D) Lower melting point

Description : Fats as compared to oils have (A) More unsaturated glycerides of fatty acids (B) Less unsaturated glycerides of fatty acids (C) Much higher reactivity to oxygen (D) Lower melting point

Last Answer : (B) Less unsaturated glycerides of fatty acids

Unsaturated oils compared to saturated oils have (A) Lower melting point & higher reactivity to oxygen (B) Higher melting point & higher reactivity to oxygen (C) Lower melting point & lower reactivity to oxygen (D) Higher melting point & lower reactivity to oxygen

Description : Unsaturated oils compared to saturated oils have (A) Lower melting point & higher reactivity to oxygen (B) Higher melting point & higher reactivity to oxygen (C) Lower melting point & lower reactivity to oxygen (D) Higher melting point & lower reactivity to oxygen

Last Answer : (A) Lower melting point & higher reactivity to oxygen

Nylon-6 as compared to Nylon-66 is having higher (A) Hardness (B) Abrasion/resistance (C) Melting point (D) None of these

Description : Nylon-6 as compared to Nylon-66 is having higher (A) Hardness (B) Abrasion/resistance (C) Melting point (D) None of these

Last Answer : (D) None of these

Nylon-6 as compared to nylon-66 is (A) Harder (B) More abrasion resistant (C) Having higher melting point (D) None of these

Description : Nylon-6 as compared to nylon-66 is (A) Harder (B) More abrasion resistant (C) Having higher melting point (D) None of these

Last Answer : (D) None of these

Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity (B) High thermal conductivity (C) Low density (D) High chemical activity

Description : Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity (B) High thermal conductivity (C) Low density (D) High chemical activity

Last Answer : B) High thermal conductivity

. In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher (A) Densities (B) Melting point (C) Tensile strength (D) Hardness, rigidity & brittleness

Description : . In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher (A) Densities (B) Melting point (C) Tensile strength (D) Hardness, rigidity & brittleness

Last Answer : (D) Hardness, rigidity & brittleness

In arc welding, Argon is used because of its - (1) Low reactivity with metal (2) Ability to lower the melting point of the metal (3) High flammability (4) High calorific value

Description : In arc welding, Argon is used because of its - (1) Low reactivity with metal (2) Ability to lower the melting point of the metal (3) High flammability (4) High calorific value

Last Answer : (1) Low reactivity with metal Explanation: In arc welding, Argon is used as a shielding gas because it is chemically inert and forms no compounds. At the high temperatures that welding requires, the ... to brittle welds and instability in the welding arc. So,argon and other inert gases are sprayed.

In arc welding, Argon is used because of its (1) Low reactivity with metal (2) Ability to lower the melting point of the metal (3) High flammability (4) High calorific value

Description : In arc welding, Argon is used because of its (1) Low reactivity with metal (2) Ability to lower the melting point of the metal (3) High flammability (4) High calorific value

Last Answer :  Low reactivity with metal

Refractory metals are known for which of the following properties: w) lack of chemical reactivity x) low density y) high melting point z) high thermal conductivity

Description : Refractory metals are known for which of the following properties: w) lack of chemical reactivity x) low density y) high melting point z) high thermal conductivity

Last Answer : ANSWER: Y -- HIGH MELTING POINT

Tin base and lead base alloys are used for bearing materials. Tin compared to lead has lower (A) Price (B) Corrosion resistance (C) Thermal conductivity (D) Abundant availability

Description : Tin base and lead base alloys are used for bearing materials. Tin compared to lead has lower (A) Price (B) Corrosion resistance (C) Thermal conductivity (D) Abundant availability

Last Answer : (D) Abundant availability

Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance

Description : Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance

Last Answer : (A) Higher melting points

Ceramic compounds as compared to metallic compounds (A) Crystallise faster (B) Resist greater tensile stress at room temperature (C) Have higher melting temperature (D) Are better conductor of electricity at higher temperature

Description : Ceramic compounds as compared to metallic compounds (A) Crystallise faster (B) Resist greater tensile stress at room temperature (C) Have higher melting temperature (D) Are better conductor of electricity at higher temperature

Last Answer : Option C

The electrical conductivity of a __________ decreases with rise in temperature. (A) Metal/alloy (B) Semi-conductor (C) Dielectric (D) None of these

Description : The electrical conductivity of a __________ decreases with rise in temperature. (A) Metal/alloy (B) Semi-conductor (C) Dielectric (D) None of these

Last Answer : (A) Metal/alloy

With increase in temperature, the electrical conductivity of a __________ decreases. (A) Semi-conductor (B) Metal or alloy (C) Dielectric (D) None of these

Description : With increase in temperature, the electrical conductivity of a __________ decreases. (A) Semi-conductor (B) Metal or alloy (C) Dielectric (D) None of these

Last Answer : (A) Semi-conductor

Since fuse elements are made of zinc or any alloy of tin and lead, the melting point of the fuse element must be _____________. A. higher than that of copper B. lower than that of copper C. equal to that of copper D. reached when the conductor it is protecting becomes 'white hot.'

Description : Since fuse elements are made of zinc or any alloy of tin and lead, the melting point of the fuse element must be _____________. A. higher than that of copper B. lower than that of copper C. equal to that of copper D. reached when the conductor it is protecting becomes 'white hot.'

Last Answer : Answer: B

On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because – (1) metals have higher thermal capacity than plastics (2) plastics have a lower density than metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Description : On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because - (1) metals ... metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Last Answer : (3) metals are good conductors of heat Explanation: On a chilly day, the room temperature is lower than our body temperature. Since metals have a higher coefficient of thermal conductivity than plastic, they ... from our fingers will flow to the metal cap much more quickly than to the plastic body.

On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because : (1) metals have higher thermal capacity than plastics (2) plastics have a lower density than metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Description : On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because : (1) metals ... metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Last Answer : metals are good conductors of heat

Branched chair polymers as compared to linear polymers have (A) Higher melting point (B) Higher tensile strength (C) Lower density (D) None of these

Description : Branched chair polymers as compared to linear polymers have (A) Higher melting point (B) Higher tensile strength (C) Lower density (D) None of these

Last Answer : (C) Lower density

Which of the following is not property of an alloy? a) strong b)resistant to corrosion c)hard d)Poor conductor of electricity

Description : Which of the following is not property of an alloy? a) strong b)resistant to corrosion c)hard d)Poor conductor of electricity

Last Answer : d)Poor conductor of electricity

Coke having higher porosity has (A) Lower bulk density (B) Lower strength (C) Higher reactivity (D) All (A), (B) and (C)

Description : Coke having higher porosity has (A) Lower bulk density (B) Lower strength (C) Higher reactivity (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

For aluminium, as compared to copper, all the following factors have higher values except (a) specific volume (6) electrical conductivity (c) co-efficient of linear expansion (d) resistance per unit length for same cross-section

Description : For aluminium, as compared to copper, all the following factors have higher values except (a) specific volume (6) electrical conductivity (c) co-efficient of linear expansion (d) resistance per unit length for same cross-section

Last Answer : (6) electrical conductivity

Presence of 0.3 to 0.5% arsenic in copper increases its (A) Ductility (B) Malleability (C) Tenacity & hardness (D) Electrical conductivity

Description : Presence of 0.3 to 0.5% arsenic in copper increases its (A) Ductility (B) Malleability (C) Tenacity & hardness (D) Electrical conductivity

Last Answer : (C) Tenacity & hardness

What terms describe a substance that has a low melting point and poor electrical conductivity?

Description : What terms describe a substance that has a low melting point and poor electrical conductivity?

Last Answer : covalent and molecular

Metallic recuperators are not used for waste heat recovery, if the hot flue gas temperature is above __________ °C, because corrosion prevails at higher temperatures. (A) 350 (B) 750 (C) 1050 (D) 1250

Description : Metallic recuperators are not used for waste heat recovery, if the hot flue gas temperature is above __________ °C, because corrosion prevails at higher temperatures. (A) 350 (B) 750 (C) 1050 (D) 1250

Last Answer : (B) 750

Hot dipping process is used for coating a low melting point metal (e.g. Pb, Sn, Zn) on iron, steel & copper having relatively higher melting points. Which of the following is not a hot dipping process? (A) Galvanising (B) Tinning (C) Sherardizing (D) None of these

Description : Hot dipping process is used for coating a low melting point metal (e.g. Pb, Sn, Zn) on iron, steel & copper having relatively higher melting points. Which of the following is not a hot dipping process? (A) Galvanising (B) Tinning (C) Sherardizing (D) None of these

Last Answer : (C) Sherardizing

The maximum adiabatic flame temperature in air as compared to that in pure oxygen is (A) Much lower (B) Much higher (C) Same (D) Either lower or higher, depends on the type of fuel

Description : The maximum adiabatic flame temperature in air as compared to that in pure oxygen is (A) Much lower (B) Much higher (C) Same (D) Either lower or higher, depends on the type of fuel

Last Answer : (A) Much lower

Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than chromate coating (C) The base metal to be electroplated is normally made the cathode of the electrolytic cell and coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Description : Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than ... coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Last Answer : (D) Calorising is the process of coating steel with chromium

What is the critical radius of insulation (cms) for a metallic cylinder, if the convective heat transfer co-efficient with the ambient atmosphere is 5 W/m2. °K? Thermal conductivity of metal and insulation material are 40 and 0.1 W/m.°K respectively. (A) 2 (B) 8 (C) 10 (D) 40

Description : What is the critical radius of insulation (cms) for a metallic cylinder, if the convective heat transfer co-efficient with the ambient atmosphere is 5 W/m2. °K? Thermal conductivity of metal and insulation material are 40 and 0.1 W/m.°K respectively. (A) 2 (B) 8 (C) 10 (D) 40

Last Answer : (A) 2

A metallic alloy in which one of the constituent metal is __________, is called an amalgam. (A) Zinc (B) Mercury (C) Lead (D) Tin

Description : A metallic alloy in which one of the constituent metal is __________, is called an amalgam. (A) Zinc (B) Mercury (C) Lead (D) Tin

Last Answer : (B) Mercury

Weld decay will cause which of the following problems? a) A reduced resistance to corrosion b) a lower tensile strength c) The toughness is reduced d) The hardness will increase

Description : Weld decay will cause which of the following problems? a) A reduced resistance to corrosion b) a lower tensile strength c) The toughness is reduced d) The hardness will increase

Last Answer : a) A reduced resistance to corrosion

Wrought iron is having very high (A) Hardness (B) Strength (C) Corrosion resistance (D) Susceptibility to changes in its properties by heat treatment

Description : Wrought iron is having very high (A) Hardness (B) Strength (C) Corrosion resistance (D) Susceptibility to changes in its properties by heat treatment

Last Answer : (C) Corrosion resistance

H2 is a better coolant than CO2 , due to it’s relatively (A) Lower density (B) Higher specific heat (C) Non-reactivity to uranium (D) Lower neutron capture cross-section

Description : H2 is a better coolant than CO2 , due to it’s relatively (A) Lower density (B) Higher specific heat (C) Non-reactivity to uranium (D) Lower neutron capture cross-section

Last Answer : (B) Higher specific heat

Alloys having more than 80% copper are generally more (A) Abrasion resistant (B) Corrosion resistant (C) Prone to season cracking (D) Machinable

Description : Alloys having more than 80% copper are generally more (A) Abrasion resistant (B) Corrosion resistant (C) Prone to season cracking (D) Machinable

Last Answer : (B) Corrosion resistant

The higher reactivity of an alkene or alkyne, as compared to an alkane, is due to (a) sigma bonds (b) pi bonds (c) hydrogen bonds (d) None of these

Description : The higher reactivity of an alkene or alkyne, as compared to an alkane, is due to (a) sigma bonds (b) pi bonds (c) hydrogen bonds (d) None of these

Last Answer : pi bonds

Critical Air Blast (CAB) value of coke is a direct measure of its (A) Reactivity (B) Hardness (C) Strength (D) None of these

Description : Critical Air Blast (CAB) value of coke is a direct measure of its (A) Reactivity (B) Hardness (C) Strength (D) None of these

Last Answer : (A) Reactivity

Pick out the wrong statement. (A) Cokes of high reactivity are obtained from weakly coking coals (B) Cokes of high reactivity are obtained from strongly coking coals (C) Reactivity of coke is inversely proportional to its absolute density (D) Abrasion index of the coke is a measure of its hardness

Description : Pick out the wrong statement. (A) Cokes of high reactivity are obtained from weakly coking coals (B) Cokes of high reactivity are obtained from strongly coking coals (C) Reactivity of coke is inversely proportional to its absolute density (D) Abrasion index of the coke is a measure of its hardness

Last Answer : (B) Cokes of high reactivity are obtained from strongly coking coals

"Micum Index" of a coke is a measure of its (A) Reactivity (B) Porosity (C) Bulk density (D) Hardness & strength

Description : "Micum Index" of a coke is a measure of its (A) Reactivity (B) Porosity (C) Bulk density (D) Hardness & strength

Last Answer : (D) Hardness & strength

Branched chain polymers compared to linear polymers have higher (A) Density (B) Tensile strength (C) Melting point (D) Degree of irregularity in atomic packing

Description : Branched chain polymers compared to linear polymers have higher (A) Density (B) Tensile strength (C) Melting point (D) Degree of irregularity in atomic packing

Last Answer : (D) Degree of irregularity in atomic packing

Pure nickel is (A) Ferromagnetic above its curie point (i.e., 415°C)(B) Having h.c.p. crystal lattice(C) Ferromagnetic at room temperature(D) Not resistant to oxidation at high temperature

Description : Pure nickel is (A) Ferromagnetic above its curie point (i.e., 415°C) (B) Having h.c.p. crystal lattice (C) Ferromagnetic at room temperature (D) Not resistant to oxidation at high temperature

Last Answer : (C) Ferromagnetic at room temperature

Plutonium (A) Is recovered from spent fuel from thermal nuclear reactor (B) Has much lower melting point (640°C ) compared to thorium (1690°C) (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Plutonium (A) Is recovered from spent fuel from thermal nuclear reactor (B) Has much lower melting point (640°C ) compared to thorium (1690°C) (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B

Wrought iron is not (A) Ductile & resistant to corrosion/rusting (B) Weldable easily (C) Having uniform strength in all directions (D) Having maximum tensile strength along the lines of slag distribution

Description : Wrought iron is not (A) Ductile & resistant to corrosion/rusting (B) Weldable easily (C) Having uniform strength in all directions (D) Having maximum tensile strength along the lines of slag distribution

Last Answer : Option C

Brazing filler metal used for joining steel plates (A) Melts below the melting points of base metals (B) Melts below 300°C (C) Is copper phosphorous alloy

Description : Brazing filler metal used for joining steel plates (A) Melts below the melting points of base metals (B) Melts below 300°C (C) Is copper phosphorous alloy

Last Answer : (A) Melts below the melting points of base metals

Which of the following low melting alloy containing bismuth and lead is used for electric fuse? (A) Wood's metal (B) Babbitt metal (C) Monel metal (D) Duralumin

Description : Which of the following low melting alloy containing bismuth and lead is used for electric fuse? (A) Wood's metal (B) Babbitt metal (C) Monel metal (D) Duralumin

Last Answer : Option A

The most corrosion-resistant metal?

Description : The most corrosion-resistant metal?

Last Answer : Iridium

Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making(C) Copper has poor weldability(D) Reinforced plastics are made from both thermoplastic as well asthermosetting plastics

Description : Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is ... has poor weldability (D) Reinforced plastics are made from both thermoplastic as well as thermosetting plastics

Last Answer : (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making

Alloy having low melting point?

Description : Alloy having low melting point?

Last Answer : Solder

Ceramic recuperators compared to metallic recuperators for the same duty (A) Are lighter (B) Occupy more space (C) Are less costly (D) Have higher pressure differential between flue gas & air side

Description : Ceramic recuperators compared to metallic recuperators for the same duty (A) Are lighter (B) Occupy more space (C) Are less costly (D) Have higher pressure differential between flue gas & air side

Last Answer : (B) Occupy more space

Solvay process as compared to dual process (i.e. modified Solvay process). (A) Can use low grade brine (B) Has less corrosion problems (C) Involves higher investment in NH3 recovery units than that for crystallisation units for NH4Cl(D) Both (B) and (C)

Description : Solvay process as compared to dual process (i.e. modified Solvay process). (A) Can use low grade brine (B) Has less corrosion problems (C) Involves higher investment in NH3 recovery units than that for crystallisation units for NH4Cl (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Babbitt metal is not a (A) Tin base alloy (B) White metal (C) Lead base alloy (D) Pure metal

Description : Babbitt metal is not a (A) Tin base alloy (B) White metal (C) Lead base alloy (D) Pure metal

Last Answer : (D) Pure metal