Write the four factors affecting the resistance of a conductor.

Write the four factors affecting the resistance of a conductor. 
by

1 Answer

Answer :

Factors affecting the resistance of a conductor: - 1.Physical state of a conductor 2.Length of a conductor 3.Area of cross section of a conductor 4.Resistivity of a conductor
by

Related questions

Write any four factors affecting concrete mix design.

Description : Write any four factors affecting concrete mix design.

Last Answer : Factors affecting concrete mix design: The concrete mix design procedure affects by the following factors. 1. Maximum water-cement ratio 2. Minimum cement content 3. Maximum nominal size of aggregate ... fine aggregate 9. Type of admixture to be used 10. Specific gravity of all ingredient materials

Name four factors affecting rate of reduction.

Description : Name four factors affecting rate of reduction. 

Last Answer : 1) Nature of reactants 2) Temperature 3) Concentration 4) Catalyst

Define evaporation and explain any four factors affecting evaporation.

Description : Define evaporation and explain any four factors affecting evaporation.

Last Answer : Definition:   Evaporation is the free escape of vapour from the surface of a liquid bellow its boiling point. Factors affecting evaporation: 1) Temperature: The rate of evaporation ... evaporated: The rate of evaporation is directly proportional to the vapour pressure of the evaporating liquid

Explain any four factors affecting filtration. Draw a well labelled diagram of leaf filter.

Description : Explain any four factors affecting filtration. Draw a well labelled diagram of leaf filter.

Last Answer : Factors which affect the rate of filtration are:   1. Pressure: The rate of filtration of liquid is directly proportional to the pressure difference between the filter medium and filter cake. Thus, the ... cake increases which decreases the rate of filtration.  Diagram of leaf filter :

Explain any four factors affecting size reduction.

Description : Explain any four factors affecting size reduction.

Last Answer : Factors affecting Size Reduction: i. Hardness: Soft material easytobreak than hard. ii. Toughness: Drug with fibrous nature or those having high moisture content are tough and hard to reduce in size ... the size reduction of the material in a machine depends upon the bulk density of the substance.

Explain any four factors affecting size reduction

Description : Explain any four factors affecting size reduction

Last Answer : Factor affecting size reduction are:  1.Hardness: Soft material easy break than hard.  2.Toughness: Drug with fibrous nature or those having high moisture content are tough and hard to reduce in ... of the size reduction of the material in a machine depends upon the bulk density of the substance.

Define evaporation. Explain any four factors affecting rate of evaporation.

Description : Define evaporation. Explain any four factors affecting rate of evaporation.

Last Answer : Definition:  Evaporation is the free escape of vapour from the surface of a liquid bellow its boiling point. Factors affecting rate of evaporation:  1. Temperature: The rate of evaporation is ... The rate of evaporation is maximum at its boiling point when the liquid has maximum vapour pressure.

Define PCU and list four factors affecting passenger car unit.

Description : Define PCU and list four factors affecting passenger car unit.

Last Answer : Passenger car unit: - In order to convert the different vehicles classes to one class such as passenger car conversion factor, is known as passenger car unit. Factors affecting passenger car unit ... vehicle classes. 5) It depends upon the factors like regulations and control of traffic. 

Define Design Speed. Give four factors affecting Design Speed.

Description : Define Design Speed. Give four factors affecting Design Speed.

Last Answer : The maximum safe speed of vehicle assumed for geometrical design of a highway is known as Design Speed. Factors affecting design speed:- 1) Class and condition of the road surface 2)Nature, intensity ... the road 4) Sight distance required 5) Topography of the area 6) Importance of highway.

Enlist four factors affecting selection of cleaning process.

Description : Enlist four factors affecting selection of cleaning process.

Last Answer : 1. Type of Contaminants 2. Composition of metal 3. Thickness of rust and scale 4. Degree of cleanliness required 5. Condition of metal 6. Surface finish tolerances 7. Allowable metal loss.

State any four factors affecting compaction with their effect.

Description : State any four factors affecting compaction with their effect.

Last Answer : Following the different factors affecting compaction of soil with their effect: Water content : When water content is less i.e. dry soil , compaction is not better , but when water ... better compaction. Hence lesser thickness of soil layers can be effectively compacted to required density.

State the factors affecting compaction. State four equipments used for field methods of compaction. Also state its suitability.

Description : State the factors affecting compaction. State four equipments used for field methods of compaction. Also state its suitability.

Last Answer : Factors affecting compaction: i) Type of soil ii) Amount of compaction iii) Water content iv) Admixtures v) Method of compaction Equipment used for compaction with suitability. i) Compaction ...  Suitability: Suitable for compacting granular soils with no fines in layer up to 1 m thickness.

List any four factors affecting selection of surface finishing processes.

Description : List any four factors affecting selection of surface finishing processes.

Last Answer : Following factors will affect the selection of surface finishing processes: 1. Material of component 2. Basic machining operation carried out on component 3. Dimensions of component 4. Final value (in µm) of machined surfaces 5. Application of machined surfaces 

Explain four factors affecting rate of immersed corrosion.

Description : Explain four factors affecting rate of immersed corrosion. 

Last Answer : A) Nature of metal: 1) Position of metal in a galvanic series: A metal having higher position in a galvanic series has more chemical reactivity and therefore, it gets attacked by gaseous ... conducting medium and promotes corrosion. e.g. Rusting of Fe is promoted in humid atmosphere.  

Name any four factors affecting electrochemical corrosion.

Description : Name any four factors affecting electrochemical corrosion.

Last Answer : A) Nature of metal:  1) Position of metal in a galvanic series: A metal having higher position in a galvanic series has more chemical reactivity and therefore, it gets attacked by gaseous and ... as a conducting medium and promotes corrosion. e.g:- Rusting of Fe is promoted in humid atmosphere.

Define weathering and write the factors affecting weathering.

Description : Define weathering and write the factors affecting weathering. 

Last Answer : Weathering: The process by which the rocks is decayed, disintegrated & de-composited with the action of the physical agent of atmosphere like wind, water & ice is called as weathering. Factors affecting ... Steep slope b. Gentle slope. 3. Climate 4. Vegetation cover & organisms. 5. Time

Factors affecting corona

Description : Factors affecting corona

Last Answer : The Following Factors affecting corona:-  1. Magnitude of Voltage : If voltage across two conductors is greater than 30 KV/cm, i.e. breakdown voltage of air than corona formation starts. ... of conductor e.g./ using ACSR, bundled conductor 3. By using smooth body conductor and hardware. 

Define magnetic permeability. State and explain the factors affecting permeability of magnetic materials

Description : Define magnetic permeability. State and explain the factors affecting permeability of magnetic materials

Last Answer : Permeability : The capability of the magnetic material to conduct the magnetic flux is known as permeability. Permeability and hysteresis loss are inversely related to each other. Factors ... impurities affect the geometric pattern of the crystals and are harmful to the magnetic property. 

State the factors affecting hysteresis loss.

Description : State the factors affecting hysteresis loss.

Last Answer : i) Flux density ii) Frequency iii) Volume of the magnetic material iv) Nature of magnetic material

Define degree of Ionisation. Explain the factors affecting degree of Ionisation.

Description : Define degree of Ionisation. Explain the factors affecting degree of Ionisation. 

Last Answer : Degree of Ionization: - The fraction of the total number of molecules of an electrolyte that ionizes in solution called the degree of ionization.  Factors Affecting Degree Ionization ... of Ionisation is directly proportional to temperature. As temperature increases, degree of ionization increases.

State the factors affecting degree of ionization.

Description : State the factors affecting degree of ionization. 

Last Answer : 1. Nature of Solute: - Ionic compounds such as acids, bases & salts are highly ionized in solution. e.g. strong acids like HCl, H2SO4 & strong bases like NaOH, KOH are ... : - At higher temperature, molecules acquire thermal energy hence degree of ionization increases with increase in temperature 

List the three factors used to calculate resistance of a particular conductor in ohms.

Description : List the three factors used to calculate resistance of a particular conductor in ohms.

Last Answer : Length, cross-sectional area, and specific resistance of a unit volume of the substance from which the conductor is made

Explain two factors affecting the development of the cotton textile in India. -Geography

Description : Explain two factors affecting the development of the cotton textile in India. -Geography

Last Answer : Two factors affecting the development of the cotton textile in India are : 1. Competition with synthetic textile. 2. Obsolete Machinery.

Explain any five factors affecting the location of an industry. -SST 10th

Description : Explain any five factors affecting the location of an industry. -SST 10th

Last Answer : Five factors that affect the location of an industry: 1. Raw material: Availability of raw material is very important for the location as it is one of the basic inputs required. 2. ... Market: A nearby market place makes it much easier to sell goods produced and reduces transportation cost.

State any two factors affecting the economic viability of mineral reserves. -SST 10th

Description : State any two factors affecting the economic viability of mineral reserves. -SST 10th

Last Answer : (i) The mineral content of the ore must be in sufficient concentration to make its extraction commercially viable. (ii) The type of formation or structure in which minerals are found determines the relative ease with which mineral ores may be mined. This also determines the cost of extraction.

Explain any five factors affecting the location of an industry. -SST 10th

Description : Explain any five factors affecting the location of an industry. -SST 10th

Last Answer : The factors affecting the location of an industry: (i) Availability of raw material. (ii) Availability of cheap labour. (iii) Availability of capital and bank facilities. (iv) Availability ... . (v) Proximity to markets. (vi) Availability of adequate and swift means of transport.

name the Factors affecting perspectives in communication -Other

Description : name the Factors affecting perspectives in communication -Other

Last Answer : Factors affecting Perspectives in Communication Factor How the factor can become a barrier Language In case of use of incorrect words, unfamiliar language and lack of detail, language can act as a ... thumb may mean ‘good job’ done for some people but may be insulting to others.

What are the factors affecting the rate of diffusion? -Biology

Description : What are the factors affecting the rate of diffusion? -Biology

Last Answer : answer:

Internal factors affecting the rate of respiration plants? -Biology

Description : Internal factors affecting the rate of respiration plants? -Biology

Last Answer : answer:

Environmental factors affecting the rate of respiration. -Biology

Description : Environmental factors affecting the rate of respiration. -Biology

Last Answer : answer:

Factors affecting plant growth. -Biology

Description : Factors affecting plant growth. -Biology

Last Answer : answer:

Factors affecting health. -Biology

Description : Factors affecting health. -Biology

Last Answer : answer:

Factors affecting vernalization. -Biology

Description : Factors affecting vernalization. -Biology

Last Answer : answer:

Factors affecting vernalization. -Biology

Description : Factors affecting vernalization. -Biology

Last Answer : answer:

what are the factors affecting rates of transpiration???? -Biology

Description : what are the factors affecting rates of transpiration???? -Biology

Last Answer : answer:

what are the factors affecting rates of transpiration???? -Biology

Description : what are the factors affecting rates of transpiration???? -Biology

Last Answer : answer:

What are the factors affecting evaporation? Explain how rate of evaporation affects by them. -Maths 9th

Description : What are the factors affecting evaporation? Explain how rate of evaporation affects by them. -Maths 9th

Last Answer : Factors That Affect the Rate of Evaporationtemperature of the liquid. A cup of hot water will evaporate more quickly than a cup of cold water.exposed surface area of the liquid. ...presence or ... substances in the liquid. ...air movement. ...concentration of the evaporating substance in the air.

What are the factors affecting diffusion? -Maths 9th

Description : What are the factors affecting diffusion? -Maths 9th

Last Answer : FactorReasonThe concentration gradientThe greater the difference in concentration, the quicker the rate of diffusion.The temperatureThe higher the temperature, the more kinetic energy the particles will have, so they will move and mix more quickly.

The plant or internal factors affecting photosynthesis are dependent on the (A)_____ and the (B)____ of the plant.

Description : The plant or internal factors affecting photosynthesis are dependent on the (A)_____ and the (B)____ of the plant.

Last Answer : The plant or internal factors affecting photosynthesis are dependent on the (A)_____ and the (B)____ of the plant.

Mention factors affecting adsorption of gas on solids.

Description : Mention factors affecting adsorption of gas on solids.

Last Answer : Mention factors affecting adsorption of gas on solids.

Factors affecting demand?

Description : Factors affecting demand?

Last Answer : Economies

What are the factors affecting viscosity?

Description : What are the factors affecting viscosity?

Last Answer : Temperature, concentration, sometimes also internal fluid velocity. Moreover density, type of liquid, surface where it flows, viscous drag.

Factors affecting enzyme activity: (A) Concentration (B) pH (C) Temperature (D) All of these

Description : Factors affecting enzyme activity: (A) Concentration (B) pH (C) Temperature (D) All of these

Last Answer : Answer : D

What are the factors affecting the selection of Maximum flux density?

Description : What are the factors affecting the selection of Maximum flux density?

Last Answer : 1. Net core weight: Higher the flux density lesser net weight of core. 2.Saving in copper:Higher the flux density lesser mean turn of windings. 3.Overall economy: Higher the flux ... High Flux density results in high losses and hence efficiency decreases 8.Hence high temperature rise and noise

What are the factors affecting voltage regulation?

Description : What are the factors affecting voltage regulation?

Last Answer : Load current Equivalent resistance Equivalent reactance power factor

What are the factors affecting the mobility in electrophoresis?

Description : What are the factors affecting the mobility in electrophoresis?

Last Answer : Net charge on the particles (pI of proteins), mass and shape of the particles, the pH of the medium, strength of electrical field, and properties of the supporting medium.

Which of the following factors or conditions is an auditor least likely to plan an audit to discover? a. High turnover of senior management. b. Inadequate monitoring of significant controls. c. Inability to generate positive cash flows from operations. d. Financial pressures affecting employees

Description : Which of the following factors or conditions is an auditor least likely to plan an audit to discover? a. High turnover of senior management. b. Inadequate monitoring of significant controls. c. Inability to generate positive cash flows from operations. d. Financial pressures affecting employees

Last Answer : Financial pressures affecting employees

PSA 315 requires that the auditor should obtain an understanding' of relevant industry, regulatory and other external factors including the applicable financial reporting framework. Which of the following is not an example of matters relating to regulatory environment that the auditor would usually consider? a. Regulatory framework for a regulated industry. b. Product technology relating to the entity's product. c. Legislation and regulation significantly affecting the entity's operationd. Taxation

Description : PSA 315 requires that the auditor should obtain an understanding' of relevant industry, regulatory and other external factors including the applicable financial reporting framework. Which of the ... product. c. Legislation and regulation significantly affecting the entity's operation d. Taxation

Last Answer : Product technology relating to the entity's product

With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct? (a) Increasing atmospheric CO2 concentration up to 0.05% can enhance CO2 fixation rate.(b) C3 plants respond to higher temperature with enhanced photosynthesis while C4 plants have much lower temperature optimum. (c) Tomato is a greenhouse crop which can be grown in CO2-enriched atmosphere for higher yield. (d) Light saturation for CO2 fixation occurs at 10% of full sunlight.

Description : With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct? (a) Increasing atmospheric CO2 concentration up to 0.05% can enhance CO2 fixation rate. ( ... for higher yield. (d) Light saturation for CO2 fixation occurs at 10% of full sunlight.

Last Answer : (b) C3 plants respond to higher temperature with enhanced photosynthesis while C4 plants have much lower temperature optimum

Factors affecting virulence may include a. The presence of pathogenicity islands. b. Their ability to penetrate the host. c. The infectious dose. d. All the above (a—c) are correct.

Description : Factors affecting virulence may include a. The presence of pathogenicity islands. b. Their ability to penetrate the host. c. The infectious dose. d. All the above (a—c) are correct.

Last Answer : d. All the above (a—c) are correct.