Enlist four factors affecting selection of cleaning process.

Enlist four factors affecting selection of cleaning process.
by

1 Answer

Answer :

1. Type of Contaminants

2. Composition of metal

3. Thickness of rust and scale

4. Degree of cleanliness required

5. Condition of metal

6. Surface finish tolerances

7. Allowable metal loss.
by

Related questions

List four advantage of welding.

Description : List four advantage of welding.

Last Answer : Advantages of welding process 1) It produce permanent joint. 2) Large number of metals can be welded. 3) Freedom in design. 4) Strong and tight joining 5) Cost effectiveness 6) Simplicity of welded structures design 7) Welding processes may be mechanized and automated

State any four names of die accessories.

Description : State any four names of die accessories.

Last Answer : List of die accessories:-  1. Stop 2. stripper 3. pilot 4. knock out 5. Pressure pad

List four automotive components manufactured by press work.

Description : List four automotive components manufactured by press work.

Last Answer : Four automotive components produced by press work: Washer, switch panels, automotive body panels, motor cover bracket, steel net, cage, filters, fuel tank, filter cap, brackets, wheel rims, cover plates, clamps, frames, channels, side panel, door panels, bonnets, fenders.

Justify use of tool inserts. State the materials used for inserts. Identify the parameters of insert designated as C – N – M – G – 12 – 04 – 08 as per ISO

Description : Justify use of tool inserts. State the materials used for inserts. Identify the parameters of insert designated as C – N – M – G – 12 – 04 – 08 as per ISO

Last Answer : Justification of tool inserts: The tools with indexible inserts of harder and special grade carbide or ceramic materials. A wear resistant layer of Titanium nitride of Titanium carbide is coated on the ... Symbol for tolerance 08: Turning insert nose radius G: symbol for fixing for chip breaker

Discuss functions of flux used to welding. Identify properties of material suitable for flux and state two materials used as flux.

Description : Discuss functions of flux used to welding. Identify properties of material suitable for flux and state two materials used as flux.

Last Answer : Functions of flux 1. A flux is a material used for removal of oxides and other undesirable substances. 2. Flux is a material used to prevent dissolve or facilitate removal of oxide. 3. ... in liquid 5. For welding alloy steel:- Mixture of boric acid , Dehydrated borax and calcium fluorides

Sketch axis orientation for CNC lathe.

Description : Sketch axis orientation for CNC lathe.

Last Answer : Fig. Axis Orientation of CNC Lathe 

Sketch axis orientation for VMC

Description : Sketch axis orientation for VMC

Last Answer : Fig. Axis orientation for VMC

Define forging.

Description : Define forging.

Last Answer : Definition of Forging: Forging can be defined as the controlled plastic deformation of metals at elevated temperatures in to a predetermined size or shape using compressive forces exerted, through some type ... & shaping it in dies under the pressure of heavy hammers, forging machines & presses.

Enlist the factors affecting on selection of survey station or survey line in chain survey.

Description : Enlist the factors affecting on selection of survey station or survey line in chain survey.

Last Answer : Following are the factors affecting on selection of survey station for chain surveying. 1) As far as possible the survey work should be based upon the basic principle of surveying i.e. working from whole ... level ground. 9) The survey lines should run as far as possible nearer to object.

Enlist any four factors which affect selection of material handling system. Explain which type of material handling system is suitable for: (i) Unloading two wheelers from truck ii) Stacking of pallets in store racks.

Description : Enlist any four factors which affect selection of material handling system. Explain which type of material handling system is suitable for: (i) Unloading two wheelers from truck ii) Stacking of pallets in store racks.

Last Answer : Four Factors affecting Selection of Material Handling System: [1] Adaptability and Flexibility [2] Type of Material to be handled [3] Type of Layout [4] Type of Production [5] ... [11] Cost of installation and handling Suitable Material Handling Devices for Following Activities:

List any four factors affecting selection of surface finishing processes.

Description : List any four factors affecting selection of surface finishing processes.

Last Answer : Following factors will affect the selection of surface finishing processes: 1. Material of component 2. Basic machining operation carried out on component 3. Dimensions of component 4. Final value (in µm) of machined surfaces 5. Application of machined surfaces 

Differentiate filtration and clarification. Enlist the different factors affecting the rate of filtration.

Description : Differentiate filtration and clarification. Enlist the different factors affecting the rate of filtration.

Last Answer : Sr.No. Filtration Clarification 1 It is the separation of an insoluble solid from a fluid or gas by means of a porous medium that retain the solid but allow the fluid to pass. ... be filtered. 6. Particle size: 7. Pore size of filter medium: 8. Nature of solid material:

Enlist the factors affecting on silting of reservoir.

Description : Enlist the factors affecting on silting of reservoir.

Last Answer : a) Catchment area b) Shape of catchment c) Slope of country d) Nature of surface soil e) Climatic conditions f) Rainfall characteristics g) Vegetation cover h) Construction of check dam

What are the factors affecting the selection of Maximum flux density?

Description : What are the factors affecting the selection of Maximum flux density?

Last Answer : 1. Net core weight: Higher the flux density lesser net weight of core. 2.Saving in copper:Higher the flux density lesser mean turn of windings. 3.Overall economy: Higher the flux ... High Flux density results in high losses and hence efficiency decreases 8.Hence high temperature rise and noise

Discuss the factors affecting selection of type of roadside trees.

Description : Discuss the factors affecting selection of type of roadside trees.

Last Answer : Factors affecting selection of type of roadside trees are: i) Trees selected should be such that it provides a large and dense crown with beautiful and uniform shape. ii) Trees must be able to ... pattern etc. viii) Trees like Gulmohar, Ashoka can be planted for landscaping on highways.

State the factors affecting selection of construction materials.

Description : State the factors affecting selection of construction materials.

Last Answer : Following are the various factors being considered for selection of construction material. 1) Prescribed load: It is a design load which can be taken by the construction material. The ... the eco-system of environment and the required material should be eco-friendly or environmentally friendly.

What are the important factors affecting selection of site for a new plant

Description : What are the important factors affecting selection of site for a new plant

Last Answer : Factors affecting selection of site for new industry/plant: 1. Availability of raw material: As far as possible the site selected should be near the source of raw materials so that cost of ... in such a way that a plenty of land other facilities must be available for future expansion.

Name four factors affecting rate of reduction.

Description : Name four factors affecting rate of reduction. 

Last Answer : 1) Nature of reactants 2) Temperature 3) Concentration 4) Catalyst

Define evaporation and explain any four factors affecting evaporation.

Description : Define evaporation and explain any four factors affecting evaporation.

Last Answer : Definition:   Evaporation is the free escape of vapour from the surface of a liquid bellow its boiling point. Factors affecting evaporation: 1) Temperature: The rate of evaporation ... evaporated: The rate of evaporation is directly proportional to the vapour pressure of the evaporating liquid

Explain any four factors affecting filtration. Draw a well labelled diagram of leaf filter.

Description : Explain any four factors affecting filtration. Draw a well labelled diagram of leaf filter.

Last Answer : Factors which affect the rate of filtration are:   1. Pressure: The rate of filtration of liquid is directly proportional to the pressure difference between the filter medium and filter cake. Thus, the ... cake increases which decreases the rate of filtration.  Diagram of leaf filter :

Explain any four factors affecting size reduction.

Description : Explain any four factors affecting size reduction.

Last Answer : Factors affecting Size Reduction: i. Hardness: Soft material easytobreak than hard. ii. Toughness: Drug with fibrous nature or those having high moisture content are tough and hard to reduce in size ... the size reduction of the material in a machine depends upon the bulk density of the substance.

Explain any four factors affecting size reduction

Description : Explain any four factors affecting size reduction

Last Answer : Factor affecting size reduction are:  1.Hardness: Soft material easy break than hard.  2.Toughness: Drug with fibrous nature or those having high moisture content are tough and hard to reduce in ... of the size reduction of the material in a machine depends upon the bulk density of the substance.

Define evaporation. Explain any four factors affecting rate of evaporation.

Description : Define evaporation. Explain any four factors affecting rate of evaporation.

Last Answer : Definition:  Evaporation is the free escape of vapour from the surface of a liquid bellow its boiling point. Factors affecting rate of evaporation:  1. Temperature: The rate of evaporation is ... The rate of evaporation is maximum at its boiling point when the liquid has maximum vapour pressure.

Define PCU and list four factors affecting passenger car unit.

Description : Define PCU and list four factors affecting passenger car unit.

Last Answer : Passenger car unit: - In order to convert the different vehicles classes to one class such as passenger car conversion factor, is known as passenger car unit. Factors affecting passenger car unit ... vehicle classes. 5) It depends upon the factors like regulations and control of traffic. 

Define Design Speed. Give four factors affecting Design Speed.

Description : Define Design Speed. Give four factors affecting Design Speed.

Last Answer : The maximum safe speed of vehicle assumed for geometrical design of a highway is known as Design Speed. Factors affecting design speed:- 1) Class and condition of the road surface 2)Nature, intensity ... the road 4) Sight distance required 5) Topography of the area 6) Importance of highway.

State any four factors affecting compaction with their effect.

Description : State any four factors affecting compaction with their effect.

Last Answer : Following the different factors affecting compaction of soil with their effect: Water content : When water content is less i.e. dry soil , compaction is not better , but when water ... better compaction. Hence lesser thickness of soil layers can be effectively compacted to required density.

State the factors affecting compaction. State four equipments used for field methods of compaction. Also state its suitability.

Description : State the factors affecting compaction. State four equipments used for field methods of compaction. Also state its suitability.

Last Answer : Factors affecting compaction: i) Type of soil ii) Amount of compaction iii) Water content iv) Admixtures v) Method of compaction Equipment used for compaction with suitability. i) Compaction ...  Suitability: Suitable for compacting granular soils with no fines in layer up to 1 m thickness.

Explain four factors affecting rate of immersed corrosion.

Description : Explain four factors affecting rate of immersed corrosion. 

Last Answer : A) Nature of metal: 1) Position of metal in a galvanic series: A metal having higher position in a galvanic series has more chemical reactivity and therefore, it gets attacked by gaseous ... conducting medium and promotes corrosion. e.g. Rusting of Fe is promoted in humid atmosphere.  

Name any four factors affecting electrochemical corrosion.

Description : Name any four factors affecting electrochemical corrosion.

Last Answer : A) Nature of metal:  1) Position of metal in a galvanic series: A metal having higher position in a galvanic series has more chemical reactivity and therefore, it gets attacked by gaseous and ... as a conducting medium and promotes corrosion. e.g:- Rusting of Fe is promoted in humid atmosphere.

Write any four factors affecting concrete mix design.

Description : Write any four factors affecting concrete mix design.

Last Answer : Factors affecting concrete mix design: The concrete mix design procedure affects by the following factors. 1. Maximum water-cement ratio 2. Minimum cement content 3. Maximum nominal size of aggregate ... fine aggregate 9. Type of admixture to be used 10. Specific gravity of all ingredient materials

Write the four factors affecting the resistance of a conductor.

Description : Write the four factors affecting the resistance of a conductor. 

Last Answer : Factors affecting the resistance of a conductor: - 1.Physical state of a conductor 2.Length of a conductor 3.Area of cross section of a conductor 4.Resistivity of a conductor

State the different factors affecting process planning.

Description : State the different factors affecting process planning. 

Last Answer : Factors affecting process planning. a. Size and shape of part: The size and shape of many components decides the basic operations for the manufacturing of pert. For example : For manufacturing ... give process engineer sufficient time to go details of each aspect to select most economical process.

Define process planning. State the factors affecting process planning and explain it.

Description : Define process planning. State the factors affecting process planning and explain it.

Last Answer : Definition of Process planning: Process planning can be defined as the systematic determination of the process by which a product is to be manufactured economically and competitively. Factors ... process engineer sufficient time to go details of each aspect to select most economical process.

State and explain various factors affecting process planning.

Description : State and explain various factors affecting process planning.

Last Answer : Factors affecting process planning:  a. Size and shape of part: The size and shape of many components decides the basic operations for the manufacturing of pert. For example : For ... generally do not allow process engineer to select most economical process and tool for economic production. 

State and explain any four factors governing selection of induction motor.

Description : State and explain any four factors governing selection of induction motor.

Last Answer : The factors governing the selection of Induction motor: 1) Load torque required at normal speed matches with available torque of motor. 2) Break down torque or pull out torque or maximum torque ... If selecting energy efficient motor the cost benefit analysis over the long run must be worked out.

State any four factors for selection of hydro power plant site.

Description : State any four factors for selection of hydro power plant site. 

Last Answer : Following Factors to be kept while site selecting for Hydro power plant: 1) Quantity of water available :-Where high rainfall occures so that sufficent quantity of water can be stored for generation of ... be possible to divert the stream. 11. Sand, gravel, etc., should be available nearby.

State any four factors for selection of site of wind power plant.

Description : State any four factors for selection of site of wind power plant.

Last Answer : The Factors for selection of site for Wind Mills: 1) The site should be selected where winds are strong i.e. where pressure of wind is high and there is continuity (14.4- 16.2 km/h) ... 50m of the turbine which can affect the system's overall performance 10)Possibility to connect to power grid. 

State any four factors governing Selection of site for thermal power station.

Description : State any four factors governing Selection of site for thermal power station. 

Last Answer : Following Factors are to be considered:- 1. It should locate near coal mine. 2. Sufficient quantity of water should be available. 3. Sufficient large space should be available. 4. It should be located ... laws of the land and the town planning. 14. The interests of national defense must be served.

Enlist any four operations carried out in forging process and explain fullering with neat sketch.

Description : Enlist any four operations carried out in forging process and explain fullering with neat sketch.

Last Answer : Operations carried out in forging process:  a) Upsetting b) Drawing Down c) Setting down d) Welding e) Bending f) Cutting g) Punching Fullering: In ... sledge hammer. The force is applied on the top fuller which results in decreasing the cross section at that point.

Enlist any four process parameters in EDM

Description : Enlist any four process parameters in EDM

Last Answer : Ans: Process parameters in EDM are: 1. Peak current 2. Peak Voltage 3. Spark gap 4. Pulse duration 5. Dielectric pressure 6. Material removal rate (MRR) 7. Polarity

The auditor's understanding of the entity and its environment consists of an understanding of the following aspects except a. Industry, regulatory, and other external factors, including the applicable financial reporting framework. b. Nature of the entity, including the entity's selection and application of accounting policies. c. Measurement and review of the entity's financial performance. d. Entity's selection and screening process of marketing and production personnel.

Description : The auditor's understanding of the entity and its environment consists of an understanding of the following aspects except a. Industry, regulatory, and other external factors, including the ... financial performance. d. Entity's selection and screening process of marketing and production personnel.

Last Answer : Entity's selection and screening process of marketing and production personnel.

Give detail classification of welding. State important factors upon which selection of welding process depends.

Description : Give detail classification of welding. State important factors upon which selection of welding process depends. 

Last Answer : Answer: Classification of Welding 1. Arc welding a. Carbon Arc Welding; b. Shielded Metal Arc Welding (SMAW) c. Submerged Arc Welding (SAW) d. Metal Inert Gas Welding (MIG, ... workers 14. Cost of materials 15. Code or specification requirements 16. Mechanical properties desired in joints 

Enlist factors considered for selecting a testing tool for test automation.

Description : Enlist factors considered for selecting a testing tool for test automation.

Last Answer : The following factors are important during tool selection: i. Assessment of the organization's maturity (e.g. readiness for change); ii. Identification of the areas within the organization where ... the tool is another important point to be considered while selecting and deploying the test tool.

Enlist any two factors on which friction coefficient ‘F’ depends.

Description : Enlist any two factors on which friction coefficient ‘F’ depends.

Last Answer : i. Diameter of pipe ii.Velocity of flow  iii. Reynold’s number of the flow  iv.Roughness condition of the pipe surface

Explain two factors affecting the development of the cotton textile in India. -Geography

Description : Explain two factors affecting the development of the cotton textile in India. -Geography

Last Answer : Two factors affecting the development of the cotton textile in India are : 1. Competition with synthetic textile. 2. Obsolete Machinery.

Explain any five factors affecting the location of an industry. -SST 10th

Description : Explain any five factors affecting the location of an industry. -SST 10th

Last Answer : Five factors that affect the location of an industry: 1. Raw material: Availability of raw material is very important for the location as it is one of the basic inputs required. 2. ... Market: A nearby market place makes it much easier to sell goods produced and reduces transportation cost.

State any two factors affecting the economic viability of mineral reserves. -SST 10th

Description : State any two factors affecting the economic viability of mineral reserves. -SST 10th

Last Answer : (i) The mineral content of the ore must be in sufficient concentration to make its extraction commercially viable. (ii) The type of formation or structure in which minerals are found determines the relative ease with which mineral ores may be mined. This also determines the cost of extraction.

Explain any five factors affecting the location of an industry. -SST 10th

Description : Explain any five factors affecting the location of an industry. -SST 10th

Last Answer : The factors affecting the location of an industry: (i) Availability of raw material. (ii) Availability of cheap labour. (iii) Availability of capital and bank facilities. (iv) Availability ... . (v) Proximity to markets. (vi) Availability of adequate and swift means of transport.

name the Factors affecting perspectives in communication -Other

Description : name the Factors affecting perspectives in communication -Other

Last Answer : Factors affecting Perspectives in Communication Factor How the factor can become a barrier Language In case of use of incorrect words, unfamiliar language and lack of detail, language can act as a ... thumb may mean ‘good job’ done for some people but may be insulting to others.

What are the factors affecting the rate of diffusion? -Biology

Description : What are the factors affecting the rate of diffusion? -Biology

Last Answer : answer: