The angle of internal friction, is least for (A) Angular-grained loose sand (B) Angular -grained dense sand (C) Round-grained loose sand (D) Clays

The angle of internal friction, is least for
(A) Angular-grained loose sand
(B) Angular -grained dense sand
(C) Round-grained loose sand
(D) Clays
by

1 Answer

Answer :

Answer: Option D
by

Related questions

The angle of internal friction is maximum for (A) angular-grained loose sand (B) angular-grained dense sand (C) round-grained dense sand (D) round-grained loose sand

Description : The angle of internal friction is maximum for (A) angular-grained loose sand (B) angular-grained dense sand (C) round-grained dense sand (D) round-grained loose sand

Last Answer : Answer: Option B

The coefficient of active earth pressure for a loose sand having an angle of internal friction of 30° is (A) 1/3 (B) 3 (C) 1 (D) 1/2

Description : The coefficient of active earth pressure for a loose sand having an angle of internal friction of 30° is (A) 1/3 (B) 3 (C) 1 (D) 1/2

Last Answer : (A) 1/3

The angle of internal friction of clays, is usually (A) 0° to 5° (B) 5° to 20° (C) 20° to 30° (D) 30° to 45

Description : The angle of internal friction of clays, is usually (A) 0° to 5° (B) 5° to 20° (C) 20° to 30° (D) 30° to 45

Last Answer : Answer: Option B

Which one of the following clays behaves like a dense sand? (A) Over-consolidated clay with a high over-consolidation ratio (B) Over-consolidated clay with a low over-consolidation ratio (C) Normally consolidated clay (D) Under-consolidated clay

Description : Which one of the following clays behaves like a dense sand? (A) Over-consolidated clay with a high over-consolidation ratio (B) Over-consolidated clay with a low over-consolidation ratio (C) Normally consolidated clay (D) Under-consolidated clay

Last Answer : Answer: Option A

Select the incorrect statement. (A) Effective cohesion of a soil can never have a negative value. (B) Effective angle of internal friction for coarse grained soils is rarely below 30°. (C) Effective angle of internal friction for a soil increases as state of compactness increases. (D) Effective angle of internal friction is a complicated function of mineralogy and clay size content.

Description : Select the incorrect statement. (A) Effective cohesion of a soil can never have a negative value. (B) Effective angle of internal friction for coarse grained soils is rarely below 30°. (C ... (D) Effective angle of internal friction is a complicated function of mineralogy and clay size content.

Last Answer : Answer: Option A

For a loose sand sample and a dense sand sample consolidated to the same effective stress (A) Ultimate strength is same and also peak strength is same (B) Ultimate strength is different but peak strength is same (C) Ultimate strength is same but peak strength of dense sand is greater than that of loose sand (D) Ultimate strength is same but peak

Description : For a loose sand sample and a dense sand sample consolidated to the same effective stress (A) Ultimate strength is same and also peak strength is same (B) Ultimate strength is different but peak strength ... of dense sand is greater than that of loose sand (D) Ultimate strength is same but peak

Last Answer : (C) Ultimate strength is same but peak strength of dense sand is greater than that of loose sand

The intensity of active earth pressure at a depth of 10 metres in dry cohesionless sand with an angle of internal friction of 30° and with a weight of 1.8 t/m3 , is (A) 4 t/m2 (B) 5 t/m2 (C) 6 t/m2 (D) 7 t/m2

Description : The intensity of active earth pressure at a depth of 10 metres in dry cohesionless sand with an angle of internal friction of 30° and with a weight of 1.8 t/m3 , is (A) 4 t/m2 (B) 5 t/m2 (C) 6 t/m2 (D) 7 t/m2

Last Answer : Answer: Option C

Negative skin friction on piles (A) Is caused due to relative settlement of the soil (B) Is caused in soft clays (C) Decreases the pile capacity (D) All of the above

Description : Negative skin friction on piles (A) Is caused due to relative settlement of the soil (B) Is caused in soft clays (C) Decreases the pile capacity (D) All of the above

Last Answer : Answer: Option D

A coarse-grained soil has a voids ratio 0.75, and specific gravity as 2.75. The critical gradient at which quick sand condition occurs, is (A) 0.25 (B) 0.50 (C) 0.75 (D) 1.00

Description : A coarse-grained soil has a voids ratio 0.75, and specific gravity as 2.75. The critical gradient at which quick sand condition occurs, is (A) 0.25 (B) 0.50 (C) 0.75 (D) 1.00

Last Answer : (D) 1.00

The internal molecular attraction of a soil, the cohesion (A) Decreases as the moisture content increases (B) Increases as the moisture content decreases (C) Is more in well compacted clays (D) Depends upon the external applied load

Description : The internal molecular attraction of a soil, the cohesion (A) Decreases as the moisture content increases (B) Increases as the moisture content decreases (C) Is more in well compacted clays (D) Depends upon the external applied load

Last Answer : Answer: Option C

Select the incorrect statement. Effective angle of shearing resistance (A) Increases as the size of particles increases (B) Increases as the soil gradation improves (C) Is limited to a maximum value of 45° (D) Is rarely more than 30° for fine grained soil

Description : Select the incorrect statement. Effective angle of shearing resistance (A) Increases as the size of particles increases (B) Increases as the soil gradation improves (C) Is limited to a maximum value of 45° (D) Is rarely more than 30° for fine grained soil

Last Answer : (C) Is limited to a maximum value of 45°

Pick up the correct statement about silt soil from the following: (A) The silt soil has particle size from 0.02 mm to 0.06 mm (B) In organic fine grained silt soil possesses no plasticity (C) The least plastic type normally consists of more or less equidimensional grains of quartz (D) All the above

Description : Pick up the correct statement about silt soil from the following: (A) The silt soil has particle size from 0.02 mm to 0.06 mm (B) In organic fine grained silt soil possesses no ... The least plastic type normally consists of more or less equidimensional grains of quartz (D) All the above

Last Answer : Answer: Option D

The passive earth pressure of a soil is proportional to (where is the angle of internal friction of the soil.) (A) tan (45° - ) (B) tan (45° + ) (C) tan2 (45° - ) (D) tan2 (45° + )

Description : The passive earth pressure of a soil is proportional to (where is the angle of internal friction of the soil.) (A) tan (45° - ) (B) tan (45° + ) (C) tan2 (45° - ) (D) tan2 (45° + )

Last Answer : (D) tan2 (45° + )

Terzaghi's bearing capacity factors Nc, Nq and Nr are functions of (A) Cohesion only (B) Angle of internal friction only (C) Both cohesion and angle of internal friction (D) None of the above

Description : Terzaghi's bearing capacity factors Nc, Nq and Nr are functions of (A) Cohesion only (B) Angle of internal friction only (C) Both cohesion and angle of internal friction (D) None of the above

Last Answer : (B) Angle of internal friction only

The earth pressure of a soil at rest, is proportional to (where is the angle of internal friction of the soil) (A) tan (45° - ) (B) tan (45° + ) (C) tan2 (45° - ) (D) None of these

Description : The earth pressure of a soil at rest, is proportional to (where is the angle of internal friction of the soil) (A) tan (45° - ) (B) tan (45° + ) (C) tan2 (45° - ) (D) None of these

Last Answer : Answer: Option D

A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of internal friction for the soil are respectively (A) 0.5 N/mm² and 30° (B) 0.05 N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Description : A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of ... N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Last Answer : Answer: Option B

Which one of the following statements is true for Mohr-Coulomb envelope? (A) Coulomb suggests that the relationship between shear strength and normal stress, is adequately represented by the straight line (B) The generalised Mohr theory suggests that, though the shear stress depends on the normal stress, the relation is not linear (C) Coulomb and Mohr suggest that a definite relationship exists among the principal stress and the angle of internal friction (D) All the above

Description : Which one of the following statements is true for Mohr-Coulomb envelope? (A) Coulomb suggests that the relationship between shear strength and normal stress, is adequately represented by the straight line ... exists among the principal stress and the angle of internal friction (D) All the above

Last Answer : Answer: Option D

The angle that Coulomb's failure envelope makes with the horizontal is called (A) Cohesion (B) Angle of internal friction (C) Angle of repose (D) None of the above

Description : The angle that Coulomb's failure envelope makes with the horizontal is called (A) Cohesion (B) Angle of internal friction (C) Angle of repose (D) None of the above

Last Answer : Answer: Option A

The shear strength of a soil (A) Is directly proportional to the angle of internal friction of the soil (B) Is inversely proportional to the angle of internal friction of the soil (C) Decreases with increase in normal stress (D) Decreases with decrease in normal stress

Description : The shear strength of a soil (A) Is directly proportional to the angle of internal friction of the soil (B) Is inversely proportional to the angle of internal friction of the soil (C) Decreases with increase in normal stress (D) Decreases with decrease in normal stress

Last Answer : Answer: Option D

Consider the following statements: For pure clay, the shear strength parameters will be 1. Cohesion c = 0; and angle of internal friction  will be maximum. 2. Cohesion c is maximum; and angle of internal friction  is also maximum. 3. Angle of internal friction  is zero, with some value of cohesion c. Which of these statements is/are correct? (a) 1, 2 & 3 (b) 1 only (c) 3 only (d) 2 only

Description : Consider the following statements: For pure clay, the shear strength parameters will be 1. Cohesion c = 0; and angle of internal friction  will be maximum. 2. Cohesion c is maximum; and angle of internal friction  is also maximum. ... is/are correct? (a) 1, 2 & 3 (b) 1 only (c) 3 only (d) 2 only

Last Answer : (c) 3 only

Least force required to draw a body up the inclined plane is W sin (plane inclination + friction angle) applied in the direction (A) Along the plane (B) Horizontally (C) Vertically(D) At an angle equal to the angle of friction to the inclined plane

Description : Least force required to draw a body up the inclined plane is W sin (plane inclination + friction  angle) applied in the direction  (A) Along the plane  (B) Horizontally  (C) Vertically  (D) At an angle equal to the angle of friction to the inclined plane 

Last Answer : (D) At an angle equal to the angle of friction to the inclined plane 

Relative density of a compacted dense sand is approximately equal to (A) 0.4 (B) 0.6 (C) 0.95 (D) 1.20

Description : Relative density of a compacted dense sand is approximately equal to (A) 0.4 (B) 0.6 (C) 0.95 (D) 1.20

Last Answer : (C) 0.95

Consider the following statements: 1. For a saturated soil, Skempton’s B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing strength in case of dense sand. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. For a saturated soil, Skempton's B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing ... 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (a) 1, 2 & 3

If the unit weight of sand particles is 2.696 g/cc. and porosity in loose state is 44%, the critical hydraulic gradient for quick sand condition, is (A) 0.91 (B) 0.92 (C) 0.93 (D) 0.95

Description : If the unit weight of sand particles is 2.696 g/cc. and porosity in loose state is 44%, the critical hydraulic gradient for quick sand condition, is (A) 0.91 (B) 0.92 (C) 0.93 (D) 0.95

Last Answer : (D) 0.95

Which one of the following surfaces will give highest coefficient of traction while using crawler track tractors? (A) Ice (B) Concrete (C) Loose sand (D) Earth

Description : Which one of the following surfaces will give highest coefficient of traction while using crawler track tractors? (A) Ice (B) Concrete (C) Loose sand (D) Earth

Last Answer : (D) Earth

Which of the following surfaces will give highest rolling resistance for a rubber tyred vehicle? (A) Concrete (B) Loose sand (C) Asphalt (D) Firm earth

Description : Which of the following surfaces will give highest rolling resistance for a rubber tyred vehicle? (A) Concrete (B) Loose sand (C) Asphalt (D) Firm earth

Last Answer : (B) Loose sand

Pick up the correct statement from the following: (A) Bulking of sand is caused due to formation of a thin film of surface moisture (B) Fine sand bulks more than coarse sand (C) The volume of fully saturated sand, is equal to the volume of dry and loose sand (D) All the above

Description : Pick up the correct statement from the following: (A) Bulking of sand is caused due to formation of a thin film of surface moisture (B) Fine sand bulks more than coarse sand (C) The volume of fully saturated sand, is equal to the volume of dry and loose sand (D) All the above

Last Answer : Answer: Option D

The steel pile which is generally sunk in soft clay or loose sand of low bearing capacity, is (A) H-pile (B) Pipe pile (C) Screw pile (D) Disc pile

Description : The steel pile which is generally sunk in soft clay or loose sand of low bearing capacity, is (A) H-pile (B) Pipe pile (C) Screw pile (D) Disc pile

Last Answer : Answer: Option C

A keloid is composed predominantly of: B A. Granulation tissue B. Dense collagen C. Loose connective tissue D. None of these

Description : A keloid is composed predominantly of: B A. Granulation tissue B. Dense collagen C. Loose connective tissue D. None of these

Last Answer : Dense collagen

Choose the correctly matched pair. (a) Tendon - Specialized connective tissue (b) Adipose tissue - Dense connective tissue (c) Areolar tissue - Loose connective tissue (d) Cartilage - Loose connective tissue

Description : Choose the correctly matched pair. (a) Tendon - Specialized connective tissue (b) Adipose tissue - Dense connective tissue (c) Areolar tissue - Loose connective tissue (d) Cartilage - Loose connective tissue

Last Answer : (c) Areolar tissue - Loose connective tissue

If a linear traverse follows a sharp curve round a large lake where it is difficult to have long legs, the accuracy of the traverse may be improved by (A) Taking short legs (B) Making repeated observations of angular and linear measurements (C) Making a subsidiary traverse to determine the length of a long leg (D) All the above

Description : If a linear traverse follows a sharp curve round a large lake where it is difficult to have long legs,  the accuracy of the traverse may be improved by  (A) Taking short legs  (B) Making ... (C) Making a subsidiary traverse to determine the length of a long leg  (D) All the above 

Last Answer : (C) Making a subsidiary traverse to determine the length of a long leg 

The angular steps used for changing direction of the stairs, are called (A) Round steps (B) Angular steps (C) Winders (D) Radial step

Description : The angular steps used for changing direction of the stairs, are called (A) Round steps (B) Angular steps (C) Winders (D) Radial steps

Last Answer : Answer: Option C

For the improvement of work ability of concrete , the shape of aggregate recommended is (a) Irregular (b) Angular (c) Round (d) Flaky

Description : For the improvement of work ability of concrete , the shape of aggregate recommended is (a) Irregular (b) Angular (c) Round (d) Flaky

Last Answer : (c) Round

Which one of the following statements is true? (A) Clays are more porous than sands (B) Pressure of organic matter in a soil decreases the bearing capacity of the soil (C) Aluminous cement is used for foundations in soils with chemical deposits (D) All the above

Description : Which one of the following statements is true? (A) Clays are more porous than sands (B) Pressure of organic matter in a soil decreases the bearing capacity of the soil (C) Aluminous cement is used for foundations in soils with chemical deposits (D) All the above

Last Answer : (D) All the above

The ratio of the undrained strength in the undrained state to the undrained strength, at the same water content, in the remoulded state, is called the sensivity of the clay. Its value for quick clays is (A) 4 (B) 8 (C) 12 (D) 20

Description : The ratio of the undrained strength in the undrained state to the undrained strength, at the same water content, in the remoulded state, is called the sensivity of the clay. Its value for quick clays is (A) 4 (B) 8 (C) 12 (D) 20

Last Answer : (D) 20

The vane shear test is used for the in-situ determination of the undrained strength of the intact fully saturated (A) Sands (B) Clays (C) Gravels (D) Highly organic soils

Description : The vane shear test is used for the in-situ determination of the undrained strength of the intact fully saturated (A) Sands (B) Clays (C) Gravels (D) Highly organic soils

Last Answer : (B) Clays

The compressibility of clays is caused due to: (A) Expulsion of double layer water from in between the grains (B) Sliping of particles to new positions of greater density (C) Bending of particles as elastic sheets (D) All the above

Description : The compressibility of clays is caused due to: (A) Expulsion of double layer water from in between the grains (B) Sliping of particles to new positions of greater density (C) Bending of particles as elastic sheets (D) All the above

Last Answer : (D) All the above

Coefficient of consolidation for clays normally (A) Decreases with increase in liquid limit (B) Increases with increase in liquid limit (C) First increases and then decreases with increase in liquid limit (D) Remains constant at all liquid limits

Description : Coefficient of consolidation for clays normally (A) Decreases with increase in liquid limit (B) Increases with increase in liquid limit (C) First increases and then decreases with increase in liquid limit (D) Remains constant at all liquid limits

Last Answer : (A) Decreases with increase in liquid limit

Most suitable material for highway embankments is (A) Granular soil (B) Organic soil (C) Silts (D) Clays

Description : Most suitable material for highway embankments is (A) Granular soil (B) Organic soil (C) Silts (D) Clays

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) The baked earth is called terra-cotta (B) The articles prepared from clay which is burnt at low temperature and cooled down slowly, are called earthen-ware (C) The articles prepared from refractory clays which as mixed with stone and crushed pottery, are called stone ware (D) All the above

Description : Pick up the correct statement from the following: (A) The baked earth is called terra-cotta (B) The articles prepared from clay which is burnt at low temperature and cooled down slowly, are called ... clays which as mixed with stone and crushed pottery, are called stone ware (D) All the above

Last Answer : Answer: Option D

Unconfined compression test it most suitable for determining the : 1. Sensitivity of clays 2. Settlement of embankments 3. ‘Strength’ of partially saturated clay sample 4. ‘Strength’ of fully saturated clay sample (a) 1, 2, 3 and 4 (b) 2 and 3 only (c) 3 and 4 only (d) 1 and 4 only

Description : Unconfined compression test it most suitable for determining the : 1. Sensitivity of clays 2. Settlement of embankments 3. ‘Strength’ of partially saturated clay sample 4. ‘Strength’ of fully saturated clay sample (a) 1, 2, 3 and 4 (b) 2 and 3 only (c) 3 and 4 only (d) 1 and 4 only

Last Answer : (d) 1 and 4 only

Let angular value of one graduation of a tube of length be the radius of its internal curved surface, then (A) = x/206265 R (B) = R/206265 x (C) = 206265/x. R (D) = x. R/206265

Description : Let angular value of one graduation of a tube of length be the radius of its internal curved surface, then (A) = x/206265 R (B) = R/206265 x (C) = 206265/x. R (D) = x. R/206265

Last Answer : (A) = x/206265 R

Coarse grained soils are best compacted by a (A) Drum roller (B) Rubber tyred roller (C) Sheep's foot roller (D) Vibratory roller

Description : Coarse grained soils are best compacted by a (A) Drum roller (B) Rubber tyred roller (C) Sheep's foot roller (D) Vibratory roller

Last Answer : (D) Vibratory roller

Which of the following methods is best suited for determination of permeability of coarse-grained soils? (A) Constant head method (B) Falling head method (C) Both the above (D) None of the above

Description : Which of the following methods is best suited for determination of permeability of coarse-grained soils? (A) Constant head method (B) Falling head method (C) Both the above (D) None of the above

Last Answer : Answer: Option A

For better strength and stability, the fine grained soils and coarse grained soils are compacted respectively as (A) Dry of OMC and wet of OMC (B) Wet of OMC and dry of OMC (C) Wet of OMC and wet of OMC (D) Dry of OMC and dry of OMC where OMC is optimum moisture content

Description : For better strength and stability, the fine grained soils and coarse grained soils are compacted respectively as (A) Dry of OMC and wet of OMC (B) Wet of OMC and dry of OMC (C) Wet of OMC and wet of OMC (D) Dry of OMC and dry of OMC where OMC is optimum moisture content

Last Answer : Answer: Option B

The most suitable method for drainage of fine grained cohesive soils is (A) Well point system (B) Vacuum method (C) Deep well system (D) Electro-osmosis method

Description : The most suitable method for drainage of fine grained cohesive soils is (A) Well point system (B) Vacuum method (C) Deep well system (D) Electro-osmosis method

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The permeability of the coarse-grained soils may be reduced by grouting (B) The process of injecting fluids (i.e. grouts) into the pores space of the soil is called grouting (C) The grouting increases the soil strength (D) All the above

Description : Pick up the correct statement from the following: (A) The permeability of the coarse-grained soils may be reduced by grouting (B) The process of injecting fluids (i.e. grouts) into the pores space of the soil is called grouting (C) The grouting increases the soil strength (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The dry density reduces by addition of water after attaining optimum moisture content (B) The line joining the peak of three moisture content graphs obtained by using three compactive energies, is called line of optimus (C) Well graded coarse grained soils can be compacted to a very high density as compared to fine grained soils (D) All the above

Description : Pick up the correct statement from the following: (A) The dry density reduces by addition of water after attaining optimum moisture content (B) The line joining the peak of three moisture content graphs ... be compacted to a very high density as compared to fine grained soils (D) All the above

Last Answer : Answer: Option D

To obtain a very high strength concrete, use very fine grained (A) Granite (B) Magnetite (C) Barite (D) Volcanic

Description : To obtain a very high strength concrete, use very fine grained (A) Granite (B) Magnetite (C) Barite (D) Volcanic

Last Answer : Answer: Option A