Which of the following is not a reversible process? (A) Expansion of an ideal gas against constant pressure (B) Atmospheric pressure vaporisation of water at 100°C (C) Solution of NaCl in water at 50°C (D) None of these

Which of the following is not a reversible process?
(A) Expansion of an ideal gas against constant pressure
(B) Atmospheric pressure vaporisation of water at 100°C
(C) Solution of NaCl in water at 50°C
(D) None of these
by

1 Answer

Answer :

C) Solution of NaCl in water at 50°C
by

Related questions

A closed system is cooled reversibly from 100°C to 50°C. If no work is done on the system (A) its internal energy (U) decreases and its entropy (S) increases (B) U and S both decreases (C) U decreases but S is constant (D) U is constant but S decreases

Description : A closed system is cooled reversibly from 100°C to 50°C. If no work is done on the system (A) its internal energy (U) decreases and its entropy (S) increases (B) U and S both decreases (C) U decreases but S is constant (D) U is constant but S decreases

Last Answer : (B) U and S both decreases

Pick out the wrong statement: (A) The expansion of a gas in vacuum is an irreversible process (B) An isometric process is a constant pressure process (C) Entropy change for a reversible adiabatic process is zero (D) Free energy change for a spontaneous process is negative

Description : Pick out the wrong statement: (A) The expansion of a gas in vacuum is an irreversible process (B) An isometric process is a constant pressure process (C) Entropy change for a reversible adiabatic process is zero (D) Free energy change for a spontaneous process is negative

Last Answer : (B) An isometric process is a constant pressure process

Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of vaporisation is constant (C) Volume in the liquid state is negligible compared with that in the vapour state (D) All (A), (B) and (C)

Description : Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of ... is negligible compared with that in the vapour state (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

What happens in a reversible adiabatic expansion process? (A) Heating takes place (B) Cooling takes place (C) Pressure is constant (D) Temperature is constant

Description : What happens in a reversible adiabatic expansion process? (A) Heating takes place (B) Cooling takes place (C) Pressure is constant (D) Temperature is constant

Last Answer : (B) Cooling takes place

The boiling point of ammonia is (a) -100°C (b) -50°C (c) - 33.3°C (d) 33.3°C.

Description : The boiling point of ammonia is (a) -100°C (b) -50°C (c) - 33.3°C (d) 33.3°C.

Last Answer : Ans: c

The life expectancy of electrical insulation, is approximately halved for an increased operating temperature of _______________. A. 10°C B. 25°C C. 50°C D. 100°C

Description : The life expectancy of electrical insulation, is approximately halved for an increased operating temperature of _______________. A. 10°C B. 25°C C. 50°C D. 100°C

Last Answer : Answer: A

A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2 MN/mm2 , the tensile force developed at a temperature of 50°C, is (A) 80 N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option

Description : A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the  ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2  MN/mm2 , the ... N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option 

Last Answer : (C) 120 N/mm

The turn-off time of a thyristor is 30 is at 50°C. What is its turn-off time at 100°C ?

Description : The turn-off time of a thyristor is 30 is at 50°C. What is its turn-off time at 100°C ?

Last Answer : The turn-off time of a thyristor is 30 is at 50°C. What is its turn-off time at 100°C ? 60 microsecond

The expression for entropy change given by, ΔS = - nR ln (P2/P1), holds good for (A) Expansion of a real gas (B) Reversible isothermal volume change (C) Heating of an ideal gas (D) Cooling of a real gas

Description : The expression for entropy change given by, ΔS = - nR ln (P2/P1), holds good for (A) Expansion of a real gas (B) Reversible isothermal volume change (C) Heating of an ideal gas (D) Cooling of a real gas

Last Answer : (B) Reversible isothermal volume change

Which of the following processes cannot be made reversible even under ideal condition of operation? (A) Free expansion of a gas (B) Compression of air in a compressor (C) Expansion of steam in a turbine (D) All (A), (B) & (C)

Description : Which of the following processes cannot be made reversible even under ideal condition of operation? (A) Free expansion of a gas (B) Compression of air in a compressor (C) Expansion of steam in a turbine (D) All (A), (B) & (C)

Last Answer : (A) Free expansion of a gas

The expression for entropy change given by, ΔS = nR ln (V2/V1) + nCvln (T2/T1) is valid for (A) Reversible isothermal volume change (B) Heating of a substance (C) Cooling of a substance (D) Simultaneous heating and expansion of an ideal gas

Description : The expression for entropy change given by, ΔS = nR ln (V2/V1) + nCvln (T2/T1) is valid for (A) Reversible isothermal volume change (B) Heating of a substance (C) Cooling of a substance (D) Simultaneous heating and expansion of an ideal gas

Last Answer : (D) Simultaneous heating and expansion of an ideal gas

For an ideal gas mixture undergoing a reversible gaseous phase chemical reaction, the equilibrium constant(A) Is independent of pressure(B) Increases with pressure(C) Decreases with pressure(D) Increases /decreases with pressure depending on the stoichiometric co￾efficients of the reaction

Description : For an ideal gas mixture undergoing a reversible gaseous phase chemical reaction, the equilibrium constant (A) Is independent of pressure (B) Increases with pressure (C) Decreases with pressure (D) Increases /decreases with pressure depending on the stoichiometric co￾efficients of the reaction

Last Answer : (B) Increases with pressure

The expression, ∆G = nRT. ln(P2/P1), gives the free energy change (A) With pressure changes at constant temperature (B) Under reversible isothermal volume change (C) During heating of an ideal gas (D) During cooling of an ideal gas

Description : The expression, ∆G = nRT. ln(P2/P1), gives the free energy change (A) With pressure changes at constant temperature (B) Under reversible isothermal volume change (C) During heating of an ideal gas (D) During cooling of an ideal gas

Last Answer : (A) With pressure changes at constant temperature

The workdone in ergs for the reversible expansion of one mole of an ideal gas from a volume of 10 litres to 20 litres at `25^(@)C` is

Description : The workdone in ergs for the reversible expansion of one mole of an ideal gas from a volume of 10 litres to 20 litres at `25^(@)C` is

Last Answer : The workdone in ergs for the reversible expansion of one mole of an ideal gas from a volume of 10 ... 0821xx298xx` log 0.5 D. `-2.303xx2xx298` log2

For the reversible isothermal expansion of one mole of an ideal gas at 300 K, from a volume of `10 dm^(3)` to `20 dm^(3), Delta H` is -

Description : For the reversible isothermal expansion of one mole of an ideal gas at 300 K, from a volume of `10 dm^(3)` to `20 dm^(3), Delta H` is -

Last Answer : For the reversible isothermal expansion of one mole of an ideal gas at 300 K, from a volume of `10 dm^(3)` to ` ... . `-1.73 KJ` C. `3.46 KJ` D. Zero

Which of the following processes are thermodynamically reversible  (a) throttling  (b) free expansion  (c) constant volume and constant pressure  (d) hyperbolic and pV = C  (e) isothermal and adiabatic.

Description : Which of the following processes are thermodynamically reversible  (a) throttling  (b) free expansion  (c) constant volume and constant pressure  (d) hyperbolic and pV = C  (e) isothermal and adiabatic.

Last Answer : Answer : e

To obtain integrated form of Clausius-Clapeyron equation, ln (P2/P1) = (∆HV/R) (1/T1- 1/T2) from the exact Clapeyron equation, it is assumed that the (A) Volume of the liquid phase is negligible compared to that of vapour phase (B) Vapour phase behaves as an ideal gas (C) Heat of vaporisation is independent of temperature (D) All (A), (B) & (C)

Description : To obtain integrated form of Clausius-Clapeyron equation, ln (P2/P1) = (∆HV/R) (1/T1- 1/T2) from the exact Clapeyron equation, it is assumed that the (A) Volume of the liquid phase is negligible compared to ... gas (C) Heat of vaporisation is independent of temperature (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Which of the following is Clausius-Clapeyron Equation for vaporisation of an ideal gas under the condition that the molar volume of liquid is negligible compared to that of the vapor? (A) d ln p/dt = Hvap/RT2 (B) d ln p/dt = RT2/Hvap (C) dp/dt = RT2/Hvap (D) dp/dt = Hvap/RT2

Description : Which of the following is Clausius-Clapeyron Equation for vaporisation of an ideal gas under the condition that the molar volume of liquid is negligible compared to that of the vapor? (A) d ln p/dt = Hvap/RT2 (B) d ln p/dt = RT2/Hvap (C) dp/dt = RT2/Hvap (D) dp/dt = Hvap/RT2

Last Answer : (A) d ln p/dt = Hvap/RT2

A piston filled with `0.04` mole of an ideal gas expands reversible from `50.0mL` at a constant temperature of `37.0^(@)C` . As it does so, it absorbs

Description : A piston filled with `0.04` mole of an ideal gas expands reversible from `50.0mL` at a constant temperature of `37.0^(@)C` . As it does so, it absorbs

Last Answer : A piston filled with `0.04` mole of an ideal gas expands reversible from `50.0mL` at a constant temperature of `37. ... J` D. `q= +208 J, w=+208 J`

Pick out the correct statement. (A) Like internal energy and enthalpy, the absolute value of standard entropy for elementary substances is zero (B) Melting of ice involves increase in enthalpy and a decrease in randomness (C) The internal energy of an ideal gas depends only on its pressure (D) Maximum work is done under reversible conditions

Description : Pick out the correct statement. (A) Like internal energy and enthalpy, the absolute value of standard entropy for elementary substances is zero (B) Melting of ice involves increase in enthalpy and ... of an ideal gas depends only on its pressure (D) Maximum work is done under reversible conditions

Last Answer : (D) Maximum work is done under reversible conditions

The thermodynamic law, PVy = constant, is not applicable in case of (A) Ideal compression of air (B) Free expansion of an ideal gas (C) Adiabatic expansion of steam in a turbine (D) Adiabatic compression of a perfect gas

Description : The thermodynamic law, PVy = constant, is not applicable in case of (A) Ideal compression of air (B) Free expansion of an ideal gas (C) Adiabatic expansion of steam in a turbine (D) Adiabatic compression of a perfect gas

Last Answer : (B) Free expansion of an ideal gas

The thermodynamic law, PVy = constant, is not followed by the (A) Free expansion of an ideal gas (B) Adiabatic expansion of steam in turbine (C) Adiabatic compression of air (D) Ideal compression of air

Description : The thermodynamic law, PVy = constant, is not followed by the (A) Free expansion of an ideal gas (B) Adiabatic expansion of steam in turbine (C) Adiabatic compression of air (D) Ideal compression of air

Last Answer : Option A

. The entropy change in a reversible isothermal process, when an ideal gas expands to four times its initial volume is (A) R loge 4 (B) R log10 4 (C) Cv log10 4 (D) Cv loge 4

Description : . The entropy change in a reversible isothermal process, when an ideal gas expands to four times its initial volume is (A) R loge 4 (B) R log10 4 (C) Cv log10 4 (D) Cv loge 4

Last Answer : (A) R loge 4

. The entropy change in a reversible isothermal process, when an ideal gas expands to four times its initial volume is (A) R loge 4 (B) R log10 4 (C) Cv log10 4 (D) Cv loge 4

Description : . The entropy change in a reversible isothermal process, when an ideal gas expands to four times its initial volume is (A) R loge 4 (B) R log10 4 (C) Cv log10 4 (D) Cv loge 4

Last Answer : (A) R loge 4

Air enters an adiabatic compressor at 300K. The exit temperature for a compression ratio of 3, assuming air to be an ideal gas (Y = Cp/Cv = 7/5) and the process to be reversible, is (A) 300 × (32/7) (B) 300 × (33/5) (C) 300 × (333/7) (D) 300 × (35/7)

Description : Air enters an adiabatic compressor at 300K. The exit temperature for a compression ratio of 3, assuming air to be an ideal gas (Y = Cp/Cv = 7/5) and the process to be reversible, is (A) 300 × (32/7) (B) 300 × (33/5) (C) 300 × (333/7) (D) 300 × (35/7)

Last Answer : A) 300 × (32/7)

When the expansion of compression of gas takes place without transfer of heat to or from the gas the process is called  a. reversible  b. adiabatic  c. polytropic  d. isothermal

Description : When the expansion of compression of gas takes place without transfer of heat to or from the gas the process is called  a. reversible  b. adiabatic  c. polytropic  d. isothermal

Last Answer : adiabatic

Fugacity of a component in an ideal gas mixture is equal to the partial pressure of that component in the mixture. The fugacity of each component in a stable homogeneous solution at constant pressure and temperature __________ as its mole fraction increases. (A) Decreases (B) Decreases exponentially (C) Increases (D) Remain constant

Description : Fugacity of a component in an ideal gas mixture is equal to the partial pressure of that component in the mixture. The fugacity of each component in a stable homogeneous solution at constant pressure and ... increases. (A) Decreases (B) Decreases exponentially (C) Increases (D) Remain constant

Last Answer : (C) Increases

Entropy change of the reaction, H2O (liquid) → H2O (gas), is termed as the enthalpy of (A) Solution (B) Vaporisation (C) Formation (D) Sublimation

Description : Entropy change of the reaction, H2O (liquid) → H2O (gas), is termed as the enthalpy of (A) Solution (B) Vaporisation (C) Formation (D) Sublimation

Last Answer : (B) Vaporisation

Claude process of gas liquefaction employs (A) Merely compression of gas beyond its critical pressure (B) Joule-Thomson expansion cooling (C) Heat exchange with colder stream (D) Adiabatic expansion against a piston or in a turbine

Description : Claude process of gas liquefaction employs (A) Merely compression of gas beyond its critical pressure (B) Joule-Thomson expansion cooling (C) Heat exchange with colder stream (D) Adiabatic expansion against a piston or in a turbine

Last Answer : (D) Adiabatic expansion against a piston or in a turbine

Linde process of gas liquefaction employs (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Adiabatic expansion against a piston or in a turbine (D) Merely compressing the gas beyond its critical pressure

Description : Linde process of gas liquefaction employs (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Adiabatic expansion against a piston or in a turbine (D) Merely compressing the gas beyond its critical pressure

Last Answer : (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion)

Which of the following has the minimum value of COP for a given refrigeration effect? (A) Reverse Carnot cycle (B) Ordinary vapour-compression cycle (C) Vapour-compression process with a reversible expansion engine (D) Air refrigeration cycle

Description : Which of the following has the minimum value of COP for a given refrigeration effect? (A) Reverse Carnot cycle (B) Ordinary vapour-compression cycle (C) Vapour-compression process with a reversible expansion engine (D) Air refrigeration cycle

Last Answer : (D) Air refrigeration cycle

Claude gas liquefaction process employs cooling (A) At constant pressure (B) By throttling (C) By expansion in an engine (D) None of these

Description : Claude gas liquefaction process employs cooling (A) At constant pressure (B) By throttling (C) By expansion in an engine (D) None of these

Last Answer : (C) By expansion in an engine

Linde gas liquefaction process employs cooling (A) By throttling (B) By expansion in an engine (C) At constant pressure (D) None of these

Description : Linde gas liquefaction process employs cooling (A) By throttling (B) By expansion in an engine (C) At constant pressure (D) None of these

Last Answer : (A) By throttling

In a totally irreversible isothermal expansion process for an ideal gas, ΔE = 0, ΔH = 0. Then ΔQ and ΔS will be (A) ΔQ = 0, ΔS=0 (B) ΔQ = 0, ΔS = +ve (C) ΔQ = 0, ΔS = -ve (D) ΔQ = +ve, ΔS= +ve

Description : In a totally irreversible isothermal expansion process for an ideal gas, ΔE = 0, ΔH = 0. Then ΔQ and ΔS will be (A) ΔQ = 0, ΔS=0 (B) ΔQ = 0, ΔS = +ve (C) ΔQ = 0, ΔS = -ve (D) ΔQ = +ve, ΔS= +ve

Last Answer : (B) ΔQ = 0, ΔS = +ve

In a reversible chemical reaction (where, Δx = number of moles of products-number of moles of reactants) (A) Addition of inert gas favours the forward reaction, when Δx is positive (B) Pressure has no effect on equilibrium, when Δn = 0 (C) Addition of inert gas has no effect on the equilibrium constant at constant volume for any value of Δx (+ ve, - ve) or zero) (D) All 'a', 'b' & 'c'

Description : In a reversible chemical reaction (where, Δx = number of moles of products-number of moles of reactants) (A) Addition of inert gas favours the forward reaction, when Δx is positive (B) Pressure has no effect on equilibrium, when Δn = ... any value of Δx (+ ve, - ve) or zero) (D) All 'a', 'b' & 'c'

Last Answer : D) All 'a', 'b' & 'c'

For a constant pressure reversible process, the enthalpy change (ΔH) of the system is (A) Cv.dT (B) Cp.dT (C) ∫ Cp.dT (D) ∫ Cv.dT

Description : For a constant pressure reversible process, the enthalpy change (ΔH) of the system is (A) Cv.dT (B) Cp.dT (C) ∫ Cp.dT (D) ∫ Cv.dT

Last Answer : (C) ∫ Cp.dT

On a P-V diagram of an ideal gas, suppose a reversible adiabatic line intersects a reversible isothermal line at point A. Then at a point A, the slope of the reversible adiabatic line (∂P/∂V)s and the slope of the reversible isothermal line (∂P/∂V)T are related as (where, y = Cp/Cv) (A) (∂P/∂V)S = (∂P/∂V)T (B) (∂P/∂V)S = [(∂P/∂V)T]Y (C) (∂P/∂V)S = y(∂P/∂V)T (D) (∂P/∂V)S = 1/y(∂P/∂V)T

Description : On a P-V diagram of an ideal gas, suppose a reversible adiabatic line intersects a reversible isothermal line at point A. Then at a point A, the slope of the reversible adiabatic line (∂P/∂V)s and the slope of the reversible isothermal line ... Y (C) (∂P/∂V)S = y(∂P/∂V)T (D) (∂P/∂V)S = 1/y(∂P/∂V)T

Last Answer : (C) (∂P/∂V)S = y(∂P/∂V)T

For an isothermal reversible compression of an ideal gas (A) Only ΔE = 0 (B) Only ΔH =0 (C) ΔE = ΔH = 0 (D) dQ = dE

Description : For an isothermal reversible compression of an ideal gas (A) Only ΔE = 0 (B) Only ΔH =0 (C) ΔE = ΔH = 0 (D) dQ = dE

Last Answer : C) ΔE = ΔH = 0

One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Description : One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Last Answer : (B) Evaporate the water

Chlorine gas is produced by the electrolysis of brine (NaCl solution with solid NaCl make up) in mercury electrolytic cell. Which of the following is the anodic reaction? (A) Oxidation of Na + ions (B) Oxidation of Cl - ions (C) Reduction of Na + ions (D) Reduction of Cl - ions

Description : Chlorine gas is produced by the electrolysis of brine (NaCl solution with solid NaCl make up) in mercury electrolytic cell. Which of the following is the anodic reaction? (A) Oxidation of Na + ions (B) Oxidation of Cl - ions (C) Reduction of Na + ions (D) Reduction of Cl - ions

Last Answer : (B) Oxidation of Cl - ions

The free expansion process is __________ non-flow process.  A. reversible  B. irreversible

Description : The free expansion process is __________ non-flow process.  A. reversible  B. irreversible

Last Answer : Answer: B

In order that a cycle be reversible, following must be satisfied  (a) free expansion or friction resisted expansion/compression process should not be encountered  (b) when heat is being absorbed, temperature of hot source and working sub¬stance should be same  (c) when beat is being rejected, temperature of cold source and working sub-stance should be same  (d) all of the above  (e) none of the above.

Description : In order that a cycle be reversible, following must be satisfied  (a) free expansion or friction resisted expansion/compression process should not be encountered  (b) when heat is being absorbed, temperature of hot ... sub-stance should be same  (d) all of the above  (e) none of the above.

Last Answer : Answer : d

The value of n = 1 in the polytropic process indicates it to be  (a) reversible process  (b) isothermal process  (c) adiabatic process  (d) irreversible process  (e) free expansion process.

Description : The value of n = 1 in the polytropic process indicates it to be  (a) reversible process  (b) isothermal process  (c) adiabatic process  (d) irreversible process  (e) free expansion process.

Last Answer : Answer : b

An ideal gas of volume 1liter and pressure 10 bar undergoes a quasistatic adiabatic expansion until the pressure drops to 1 bar. Assume γ to be 1.4 what is the final volume?  a. 3.18 l  b. 4.18 l  c. 5.18 l  d. 6.18 l

Description : An ideal gas of volume 1liter and pressure 10 bar undergoes a quasistatic adiabatic expansion until the pressure drops to 1 bar. Assume γ to be 1.4 what is the final volume?  a. 3.18 l  b. 4.18 l  c. 5.18 l  d. 6.18 l

Last Answer : 5.18 l

Change in internal energy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Description : Change in internal energy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Last Answer : Answer : c

Change in enthalpy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Description : Change in enthalpy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Last Answer : Answer : a

A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal to 50J/mole.K. The temperature rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Description : A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal ... rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Last Answer : (B) 10°C

Temperature and gage pressure maintained during the manufacture of hot SBR (styrene butadiene rubber) are (A) 50°C and 3 - 4 kg/cm2 (B) 50°C and 1 kgf/cm2 (C) 250°C and 10 kgf/cm2 (D) 250°C and 1 kgf/cm

Description : Temperature and gage pressure maintained during the manufacture of hot SBR (styrene butadiene rubber) are (A) 50°C and 3 - 4 kg/cm2 (B) 50°C and 1 kgf/cm2 (C) 250°C and 10 kgf/cm2 (D) 250°C and 1 kgf/cm

Last Answer : (A) 50°C and 3 - 4 kg/cm

Humidity chart is useful for the solution of problems concerning condensation, vaporisation and air conditioning. At a given dry bulb temperature, value of humidity obtained from the humidity chart directly, is in terms of __________ humidity. (A) Molal (B) Relative (C) Percentage (D) None of these

Description : Humidity chart is useful for the solution of problems concerning condensation, vaporisation and air conditioning. At a given dry bulb temperature, value of humidity obtained from the humidity chart directly, is in ... (A) Molal (B) Relative (C) Percentage (D) None of these

Last Answer : (A) Mola

It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of vaporisation is 2100 kJ/kg and the specific heat of the solution is 4 kJ/kg.K. The rate at which the heat has to be supplied in (kJ/min) to the evaporator is (A) 3.06 × 10 5 (B) 6.12 × 10 5 (C) 7.24 × 10 5 (D) 9.08 × 10

Description : It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of ... 3.06 10 5 (B) 6.12 10 5 (C) 7.24 10 5 (D) 9.08 10

Last Answer : (A) 3.06 × 10