Which of the following is Clausius-Clapeyron Equation for vaporisation of an ideal gas under the condition that the molar volume of liquid is negligible compared to that of the vapor? (A) d ln p/dt = Hvap/RT2 (B) d ln p/dt = RT2/Hvap (C) dp/dt = RT2/Hvap (D) dp/dt = Hvap/RT2

Which of the following is Clausius-Clapeyron Equation for vaporisation of an ideal gas under the condition that the molar volume of liquid is negligible compared to that of the vapor?
(A) d ln p/dt = Hvap/RT2
(B) d ln p/dt = RT2/Hvap
(C) dp/dt = RT2/Hvap
(D) dp/dt = Hvap/RT2
by

1 Answer

Answer :

(A) d ln p/dt = Hvap/RT2
by

Related questions

To obtain integrated form of Clausius-Clapeyron equation, ln (P2/P1) = (∆HV/R) (1/T1- 1/T2) from the exact Clapeyron equation, it is assumed that the (A) Volume of the liquid phase is negligible compared to that of vapour phase (B) Vapour phase behaves as an ideal gas (C) Heat of vaporisation is independent of temperature (D) All (A), (B) & (C)

Description : To obtain integrated form of Clausius-Clapeyron equation, ln (P2/P1) = (∆HV/R) (1/T1- 1/T2) from the exact Clapeyron equation, it is assumed that the (A) Volume of the liquid phase is negligible compared to ... gas (C) Heat of vaporisation is independent of temperature (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of vaporisation is constant (C) Volume in the liquid state is negligible compared with that in the vapour state (D) All (A), (B) and (C)

Description : Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of ... is negligible compared with that in the vapour state (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the Clausius-Clapeyron equation from the following: (A) dP/dT = ∆H/T∆V (B) ln P = - (∆H/RT) + constant (C) ∆F = ∆H + T [∂(∆F)/∂T]P (D) None of these

Description : Pick out the Clausius-Clapeyron equation from the following: (A) dP/dT = ∆H/T∆V (B) ln P = - (∆H/RT) + constant (C) ∆F = ∆H + T [∂(∆F)/∂T]P (D) None of these

Last Answer : B) ln P = - (∆H/RT) + constant

Clausius-Clapeyron equation is applicable to __________ equilibrium processes. (A) Solid-vapor (B) Solid-liquid (C) Liquid-vapor (D) All (A), (B) and (C)

Description : Clausius-Clapeyron equation is applicable to __________ equilibrium processes. (A) Solid-vapor (B) Solid-liquid (C) Liquid-vapor (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) Enthalpies of all elements in their standard states are assumed to be zero (B) Combustion reactions are never endothermic in nature (C) Heat of reaction at constant volume is equal to the change in internal energy (D) Clausius-Clapeyron equation is not applicable to melting process

Description : Pick out the wrong statement. (A) Enthalpies of all elements in their standard states are assumed to be zero (B) Combustion reactions are never endothermic in nature (C) Heat of reaction ... to the change in internal energy (D) Clausius-Clapeyron equation is not applicable to melting process

Last Answer : (D) Clausius-Clapeyron equation is not applicable to melting process

If the vapour pressure at two temperatures of a solid phase in equilibrium with its liquid phase are known, then the latent heat of fusion can be calculated by the (A) Maxwell's equation (B) Clausius-Clapeyron Equation (C) Van Laar equation (D) Nernst Heat Theorem

Description : If the vapour pressure at two temperatures of a solid phase in equilibrium with its liquid phase are known, then the latent heat of fusion can be calculated by the (A) Maxwell's equation (B) Clausius-Clapeyron Equation (C) Van Laar equation (D) Nernst Heat Theorem

Last Answer : B) Clausius-Clapeyron Equation

The molar excess Gibbs free energy, gE, for a binary liquid mixture at T and P is given by, (gE/RT) = A . x1. x2, where A is a constant. The corresponding equation for ln y1, where y1is the activity co-efficient of component 1, is (A) A . x22 (B) Ax1 (C) Ax2 (D) Ax12

Description : The molar excess Gibbs free energy, gE, for a binary liquid mixture at T and P is given by, (gE/RT) = A . x1. x2, where A is a constant. The corresponding equation for ln y1, where y1is the activity co-efficient of component 1, is (A) A . x22 (B) Ax1 (C) Ax2 (D) Ax12

Last Answer : (A) A . x22

Which of the following is not an equation of state? (A) Bertholet equation (B) Clausius-Clapeyron equation(C) Beattie-Bridgeman equation(D) None of these

Description : Which of the following is not an equation of state? (A) Bertholet equation (B) Clausius-Clapeyron equation (C) Beattie-Bridgeman equation (D) None of these

Last Answer : (B) Clausius-Clapeyron equation

Gibbs-Helmholtz equation is (A) ∆F = ∆H + T [∂(∆F)/∂T]P (B) ΔF = ΔH - TΔT (C) d(E - TS) T, V < 0 (D) dP/dT = ∆Hvap/T.∆Vvap

Description : Gibbs-Helmholtz equation is (A) ∆F = ∆H + T [∂(∆F)/∂T]P (B) ΔF = ΔH - TΔT (C) d(E - TS) T, V < 0 (D) dP/dT = ∆Hvap/T.∆Vvap

Last Answer : (A) ∆F = ∆H + T [∂(∆F)/∂T]P

Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation (B) Film co-efficient for vaporisation decreases as a result of vapor binding (C) In industrial practice, sub-cooling of condensate is required, when thecondensate is a volatile liquid and is to be transferred for storage(D) Overall heat transfer co-efficient in a heat exchanger is controlled by thevalue of the film co-efficient, which is higher

Description : Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation ( ... in a heat exchanger is controlled by the value of the film co-efficient, which is higher

Last Answer : (D) Overall heat transfer co-efficient in a heat exchanger is controlled by the value of the film co-efficient, which is higher

The expression, nRT ln(P1/P2), is for the __________of an ideal gas. (A) Compressibility (B) Work done under adiabatic condition (C) Work done under isothermal condition (D) Co-efficient of thermal expansion

Description : The expression, nRT ln(P1/P2), is for the __________of an ideal gas. (A) Compressibility (B) Work done under adiabatic condition (C) Work done under isothermal condition (D) Co-efficient of thermal expansion

Last Answer : C) Work done under isothermal condition

The expression, ∆G = nRT. ln(P2/P1), gives the free energy change (A) With pressure changes at constant temperature (B) Under reversible isothermal volume change (C) During heating of an ideal gas (D) During cooling of an ideal gas

Description : The expression, ∆G = nRT. ln(P2/P1), gives the free energy change (A) With pressure changes at constant temperature (B) Under reversible isothermal volume change (C) During heating of an ideal gas (D) During cooling of an ideal gas

Last Answer : (A) With pressure changes at constant temperature

McCabe-Thiele method of binary distillation does not assume that the (A) Sensible heat changes are negligible compared with latent heat changes (B) Molar latent heats of all components are equal (C) Heat of mixing is negligible (D) None of these

Description : McCabe-Thiele method of binary distillation does not assume that the (A) Sensible heat changes are negligible compared with latent heat changes (B) Molar latent heats of all components are equal (C) Heat of mixing is negligible (D) None of these

Last Answer : (D) None of these

High __________ is an undesirable property for a good refrigerant. (A) Specific heat (B) Latent heat of vaporisation (C) Viscosity (D) Specific vapor volume

Description : High __________ is an undesirable property for a good refrigerant. (A) Specific heat (B) Latent heat of vaporisation (C) Viscosity (D) Specific vapor volume

Last Answer : (C) Viscosity

The expression for entropy change given by, ΔS = - nR ln (P2/P1), holds good for (A) Expansion of a real gas (B) Reversible isothermal volume change (C) Heating of an ideal gas (D) Cooling of a real gas

Description : The expression for entropy change given by, ΔS = - nR ln (P2/P1), holds good for (A) Expansion of a real gas (B) Reversible isothermal volume change (C) Heating of an ideal gas (D) Cooling of a real gas

Last Answer : (B) Reversible isothermal volume change

The expression for entropy change given by, ΔS = nR ln (V2/V1) + nCvln (T2/T1) is valid for (A) Reversible isothermal volume change (B) Heating of a substance (C) Cooling of a substance (D) Simultaneous heating and expansion of an ideal gas

Description : The expression for entropy change given by, ΔS = nR ln (V2/V1) + nCvln (T2/T1) is valid for (A) Reversible isothermal volume change (B) Heating of a substance (C) Cooling of a substance (D) Simultaneous heating and expansion of an ideal gas

Last Answer : (D) Simultaneous heating and expansion of an ideal gas

For an ideal gas, the chemical potential is given by (A) RT d ln P (B) R d ln P (C) R d ln f (D) None of these

Description : For an ideal gas, the chemical potential is given by (A) RT d ln P (B) R d ln P (C) R d ln f (D) None of these

Last Answer : (A) RT d ln P

What horse power is required to isothermally compress 800 ft^3 of Air per minute from 14.7 psia to 120 psia?  A. 28 hp  B.108 hp  C.256 hp  D.13900 hp Formula: W= p1V1 ln (p1/p2) Power = dW / dt

Description : What horse power is required to isothermally compress 800 ft^3 of Air per minute from 14.7 psia to 120 psia?  A. 28 hp  B.108 hp  C.256 hp  D.13900 hp Formula: W= p1V1 ln (p1/p2) Power = dW / dt

Last Answer : 108 hp

Clapeyron equation is a relation between (a) temperature, pressure and enthalpy (b) specific volume and enthalpy (c) temperature and enthalpy (d) temperature, pressure, specific vapour and enthalpy.

Description : Clapeyron equation is a relation between (a) temperature, pressure and enthalpy (b) specific volume and enthalpy (c) temperature and enthalpy (d) temperature, pressure, specific vapour and enthalpy.

Last Answer : Ans: D

Clapeyron equation is applicable for registration at (a) saturation point of vapour (b) saturation point of liquid (c) sublimation temperature (d) triple point.

Description : Clapeyron equation is applicable for registration at (a) saturation point of vapour (b) saturation point of liquid (c) sublimation temperature (d) triple point.

Last Answer : Ans: a

Clapeyron Equation deals with the (A) Rate of change of vapour pressure with temperature (B) Effect of an inert gas on vapour pressure (C) Calculation of ΔF for spontaneous phase change (D) Temperature dependence of heat of phase transition

Description : Clapeyron Equation deals with the (A) Rate of change of vapour pressure with temperature (B) Effect of an inert gas on vapour pressure (C) Calculation of ΔF for spontaneous phase change (D) Temperature dependence of heat of phase transition

Last Answer : (A) Rate of change of vapour pressure with temperature

As compared to the volume occupied by gas, the volume of particles is A. more B. infinite C. negligible D. less than the volume of gas

Description : As compared to the volume occupied by gas, the volume of particles is A. more B. infinite C. negligible D. less than the volume of gas

Last Answer : negligible

What are the assumptions of the kinetic gas theory?  A. Gas molecules do not attract each other  B. The volume of the gas molecules is negligible compared to the volume of the gas  C. The molecules behave like hard spheres  D. All of the above

Description : What are the assumptions of the kinetic gas theory?  A. Gas molecules do not attract each other  B. The volume of the gas molecules is negligible compared to the volume of the gas  C. The molecules behave like hard spheres  D. All of the above

Last Answer : All of the above

The partial molar enthalpy of a component in an ideal binary gas mixture of composition Z, at a temperature T and pressure P, is a function only of (A) T (B) T and P (C) T, P and Z (D) T and Z

Description : The partial molar enthalpy of a component in an ideal binary gas mixture of composition Z, at a temperature T and pressure P, is a function only of (A) T (B) T and P (C) T, P and Z (D) T and Z

Last Answer : (B) T and P

The McCabe ΔL law states that the (A) Molar heats of vaporisation of components are nearly equal (B) Linear crystal growth rate depends on the degree of super-saturation (C) Linear crystal growth rate does not depend on the crystal size (D) Linear crystal growth rate depends on the crystal size

Description : The McCabe ΔL law states that the (A) Molar heats of vaporisation of components are nearly equal (B) Linear crystal growth rate depends on the degree of super-saturation (C) Linear ... does not depend on the crystal size (D) Linear crystal growth rate depends on the crystal size

Last Answer : (C) Linear crystal growth rate does not depend on the crystal size

Specific/molar Gibbs free energy for a pure substance does not change during (A) Sublimation (B) Vaporisation (C) Melting (D) Either (A), (B) or (C)

Description : Specific/molar Gibbs free energy for a pure substance does not change during (A) Sublimation (B) Vaporisation (C) Melting (D) Either (A), (B) or (C)

Last Answer : (D) Either (A), (B) or (C)

At normal boiling point, molar entropy of vaporisation is __________ Joule/K°.mole. (A) 72 (B) 92 (C) 142 (D) 192

Description : At normal boiling point, molar entropy of vaporisation is __________ Joule/K°.mole. (A) 72 (B) 92 (C) 142 (D) 192

Last Answer : (B) 92

In reactions involving solids and liquids (where change in volume is negligible), the heat of reaction at constant pressure as compared to that at constant volume is (A) More (B) Less (C) Same (D) Unpredictable; depends on the particular reaction

Description : In reactions involving solids and liquids (where change in volume is negligible), the heat of reaction at constant pressure as compared to that at constant volume is (A) More (B) Less (C) Same (D) Unpredictable; depends on the particular reaction

Last Answer : (C) Same

A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume of the reacting mixture is V and the density of the liquid mixture is constant. The mass balance for A is (A) d(VCA )/dt = -F (CAF - CA ) - kCA 2V (B) d(VCA )/dt = F (CAF - CA ) - kCA 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Description : A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume ... 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Last Answer : (D) d(VCA )/dt = FCAF - kCA 2V

Which of the following is not a reversible process? (A) Expansion of an ideal gas against constant pressure (B) Atmospheric pressure vaporisation of water at 100°C (C) Solution of NaCl in water at 50°C (D) None of these

Description : Which of the following is not a reversible process? (A) Expansion of an ideal gas against constant pressure (B) Atmospheric pressure vaporisation of water at 100°C (C) Solution of NaCl in water at 50°C (D) None of these

Last Answer : C) Solution of NaCl in water at 50°C

. Which of the following equations is Rittinger's crushing law? (Where P = power required by the machine, m = feed rate, k = a constant, Ds̅a & D̅sb = volume surface mean diameter of feed & product respectively.) (A) P/m = K/ √Dp (B) P/m = K . ln D̅sa /D̅sb (C) P/m = K . (1/ D̅sb - 1/Ds̅a ) (D) None of these

Description : . Which of the following equations is Rittinger's crushing law? (Where P = power required by the machine, m = feed rate, k = a constant, Ds̅a & D̅sb = volume surface mean diameter of feed & product respectively.) (A) P/m = K/ ... K . ln D̅sa /D̅sb (C) P/m = K . (1/ D̅sb - 1/Ds̅a ) (D) None of these

Last Answer : (C) P/m = K . (1/ D̅sb - 1/Ds̅a )

Variation of equilibrium pressure with temperature for any two phases of a given substances is given by the __________ equation. (A) Gibbs-Duhem (B) Maxwell's (C) Clapeyron (D) None of these

Description : Variation of equilibrium pressure with temperature for any two phases of a given substances is given by the __________ equation. (A) Gibbs-Duhem (B) Maxwell's (C) Clapeyron (D) None of these

Last Answer : (C) Clapeyron

Which is NOT a correct statement?  A. A superheated vapor will not condense when small amount of heat re removed  B. An ideal gas is a gas that is not a superheated vapor  C. A saturated liquid can absorb as much heat as it can without vaporizing  D. Water at 1 atm and room temperature is subcooled

Description : Which is NOT a correct statement?  A. A superheated vapor will not condense when small amount of heat re removed  B. An ideal gas is a gas that is not a superheated vapor  C. A saturated ... absorb as much heat as it can without vaporizing  D. Water at 1 atm and room temperature is subcooled

Last Answer : An ideal gas is a gas that is not a superheated vapor

At equilibrium condition, the chemical potential of a material in different phases in contact with each other is equal. The chemical potential for a real gas (μ) is given by (where, μ = standard chemical potential at unit fugacity (f° = 1 atm.) and the gas behaves ideally.) (A) μ° + RT ln f (B) μ°+ R ln f (C) μ° + T ln f (D) μ° + R/T ln f

Description : At equilibrium condition, the chemical potential of a material in different phases in contact with each other is equal. The chemical potential for a real gas (μ) is given by (where, μ = standard chemical potential at unit fugacity (f° = 1 atm. ... (B) μ°+ R ln f (C) μ° + T ln f (D) μ° + R/T ln f

Last Answer : (A) μ° + RT ln f

Relative volatility varies with the concentration of component for an ideal solution. The relative volatility of a binary mixture may be defined as the ratio of vapor pressure of component 'A' to that of component 'B', when (A) Only vapor phase follows Raoult's law (B) Only liquid phase obeys Dalton's law (C) Liquid phase obeys Dalton's law and vapor phase obeys Raoult's law (D) Vapor phase obeys Dalton's law and liquid phase obeys Raoult's law

Description : Relative volatility varies with the concentration of component for an ideal solution. The relative volatility of a binary mixture may be defined as the ratio of vapor pressure of component 'A' to that of ... law (D) Vapor phase obeys Dalton's law and liquid phase obeys Raoult's law

Last Answer : (D) Vapor phase obeys Dalton's law and liquid phase obeys Raoult's law

The equilibrium liquid composition compared to the vapor composition in case of Azeotropic mixture is (A) More (B) Less (C) Same (D) Either more or less; depends on the system

Description : The equilibrium liquid composition compared to the vapor composition in case of Azeotropic mixture is (A) More (B) Less (C) Same (D) Either more or less; depends on the system

Last Answer : (C) Same

Entropy change of the reaction, H2O (liquid) → H2O (gas), is termed as the enthalpy of (A) Solution (B) Vaporisation (C) Formation (D) Sublimation

Description : Entropy change of the reaction, H2O (liquid) → H2O (gas), is termed as the enthalpy of (A) Solution (B) Vaporisation (C) Formation (D) Sublimation

Last Answer : (B) Vaporisation

For a real gas, the chemical potential is given by (A) RT d ln P (B) RT d ln f (C) R d ln f (D) None of these

Description : For a real gas, the chemical potential is given by (A) RT d ln P (B) RT d ln f (C) R d ln f (D) None of these

Last Answer : (B) RT d ln f

The 'E' curve for a non-ideal reactor defines the fraction of fluid having age between t and t + dt (A) At the inlet (B) At the outlet (C) In the reactor (D) Averaged over the inlet and outlet

Description : The 'E' curve for a non-ideal reactor defines the fraction of fluid having age between t and t + dt (A) At the inlet (B) At the outlet (C) In the reactor (D) Averaged over the inlet and outlet

Last Answer : (B) At the outlet

The exit age distribution of a fluid leaving a vessel (denoted by E) is used to study the extent of non-ideal flow in the vessel. The value of ∫∞ 0 E.dt is (A) 0 (B) 1 (C) ∞ (D) √2π

Description : The exit age distribution of a fluid leaving a vessel (denoted by E) is used to study the extent of non-ideal flow in the vessel. The value of ∫∞ 0 E.dt is (A) 0 (B) 1 (C) ∞ (D) √2π

Last Answer : (B) 1

What is the value of ln y (where y = activity co-efficient) for ideal gases? (A) Zero (B) Unity (C) Infinity (D) Negative

Description : What is the value of ln y (where y = activity co-efficient) for ideal gases? (A) Zero (B) Unity (C) Infinity (D) Negative

Last Answer : (A) Zero

The equation of motion for a vibrating system with viscous damping is d 2 x/dt 2 + c/m X dx/dt + s/m X x = 0 If the roots of this equation are real, then the system will be A. over damped B. under damped C. critically damped D. none of the mentioned

Description : The equation of motion for a vibrating system with viscous damping is d 2 x/dt 2 + c/m X dx/dt + s/m X x = 0 If the roots of this equation are real, then the system will be A. over damped B. under damped C. critically damped D. none of the mentioned

Last Answer : A. over damped

The equation of motion for a vibrating system with viscous damping is d 2 x/dt 2 + c/m X dx/dt + k/m X x = 0 If the roots of this equation are real, then the system will be a) over damped b) under damped c) critically damped d) none of the mentioned Ans:a

Description : The equation of motion for a vibrating system with viscous damping is d 2 x/dt 2 + c/m X dx/dt + k/m X x = 0 If the roots of this equation are real, then the system will be a) over damped b) under damped c) critically damped d) none of the mentioned Ans:a

Last Answer : a) over damped

Equation which relates pressure, volume and temperature of a gas is called the (A) Equation of state (B) Gibbs Duhem equation (C) Ideal gas equation (D) None of these

Description : Equation which relates pressure, volume and temperature of a gas is called the (A) Equation of state (B) Gibbs Duhem equation (C) Ideal gas equation (D) None of these

Last Answer : (A) Equation of state

Pick out the wrong statement. (A) Trouton's ratio of non-polar liquids is calculated using Kistyakowsky equation (B) Thermal efficiency of a Carnot engine is always less than 1 (C) An equation relating pressure, volume and temperature of a gas is called ideal gas equation (D) None of these

Description : Pick out the wrong statement. (A) Trouton's ratio of non-polar liquids is calculated using Kistyakowsky equation (B) Thermal efficiency of a Carnot engine is always less than 1 (C) An equation relating pressure, volume and temperature of a gas is called ideal gas equation (D) None of these

Last Answer : (C) An equation relating pressure, volume and temperature of a gas is called ideal gas equation

If dp is the equivalent diameter of a non-spherical particle, Vp its volume and sp its surface area, then its sphericity is φs is defined by (A) φs = 6 Vp /dpsp (B) φs = Vp /dpsp (C) φs = 6 dpSp /Vp (D) φs = dpSp /Vp

Description : If dp is the equivalent diameter of a non-spherical particle, Vp its volume and sp its surface area, then its sphericity is φs is defined by (A) φs = 6 Vp /dpsp (B) φs = Vp /dpsp (C) φs = 6 dpSp /Vp (D) φs = dpSp /Vp

Last Answer : (A) φs = 6 Vp /dpsp

Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent) varies linearly as the radial distance (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Description : Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent ... of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Last Answer : (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity

Absolute vapor pressure of petrofuels is found by Reid bomb which is heated in water bath to 100°F. In Reid apparatus, the ratio of the volume of air chamber to that of the liquid fuel chamber is (A) 4 (B) 3 (C) 2 (D) 1

Description : Absolute vapor pressure of petrofuels is found by Reid bomb which is heated in water bath to 100°F. In Reid apparatus, the ratio of the volume of air chamber to that of the liquid fuel chamber is (A) 4 (B) 3 (C) 2 (D) 1

Last Answer : (A) 4

Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium solubility curve in case of a single component stripper (C) The operating pressure in solvent extraction system should be below vapor pressures of all components (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Description : Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium ... (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Last Answer : (C) The operating pressure in solvent extraction system should be below vapor pressures of all components