A modem- 1) Translates along Signals from a computer into digital Signals that can travel along conventional telephone lines 2) Translates digital Signals from a computer into analog Signals that can travel along conventional telephone lines 3) Demodulates digital Signals from a computer. 4) None of these

A modem-
1) Translates along Signals from a computer into digital Signals that can travel along
conventional
telephone lines
2) Translates digital Signals from a computer into analog Signals that can travel along
conventional
telephone lines
3) Demodulates digital Signals from a computer.
4) None of these
by

1 Answer

Answer :

4) None of these
by

Related questions

The piece of hardware that converts your computers digital signal to an analog signal that can travel over telephone lines is called a: a) Red Wire b) Blue Cord c) Tower d) Modem e) None of These

Description : The piece of hardware that converts your computers digital signal to an analog signal that can travel over telephone lines is called a: a) Red Wire b) Blue Cord c) Tower d) Modem e) None of These

Last Answer : d) Modem

The device that converts digital signals to analog signals at the start of long distance transmissions is (1) peripheral (2) modem (3) telephone (4) antenna

Description : The device that converts digital signals to analog signals at the start of long distance transmissions is (1) peripheral (2) modem (3) telephone (4) antenna

Last Answer : modem

The digital signals to analog signals are carried out by ………., so that data can travel over telephone lines. -Technology

Description : The digital signals to analog signals are carried out by ………., so that data can travel over telephone lines. -Technology

Last Answer : The digital signals to analog signals are carried out by MODEMso that data can travel over telephone lines.

Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog conversion at the start of a long distance transmission? A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Description : Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog ... A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Last Answer : Modem

The conversion of digital signal into analog for purposes of transmitting into the telephone line is done through ______. A. ISDN B. Radio C. RS232C D. Modem

Description : The conversion of digital signal into analog for purposes of transmitting into the telephone line is done through ______. A. ISDN B. Radio C. RS232C D. Modem

Last Answer : D. Modem

The device that converts computer output for transmission over telephone lines is called (1) interface (2) interpreter (3) modem (4) I/O port

Description : The device that converts computer output for transmission over telephone lines is called (1) interface (2) interpreter (3) modem (4) I/O port

Last Answer : modem

Different computers are connected to a LAN by a cable and a (1) modem (2) interface card (3) special wires (4) telephone lines

Description : Different computers are connected to a LAN by a cable and a (1) modem (2) interface card (3) special wires (4) telephone lines

Last Answer : interface card

The computer that can input analog signals and return result in digital form A) Analog Computers B) Digital Computers C) Hybrid Computers D) Mainframe Computers

Description : The computer that can input analog signals and return result in digital form A) Analog Computers B) Digital Computers C) Hybrid Computers D) Mainframe Computers

Last Answer : Answer : C

Signals can be analog or digital and a computer that processes the both type of signals is known as A) Analog computer B) Digital Computer C) Hybrid Computer D) Mainframe Computer

Description : Signals can be analog or digital and a computer that processes the both type of signals is known as A) Analog computer B) Digital Computer C) Hybrid Computer D) Mainframe Computer

Last Answer : Answer : C

Which of the following statement is correct ? (A) Modem is a software (B) Modem helps in stabilizing the voltage (C) Modem is the operating system (D) Modem converts the analog signal into digital signal and vice-versa

Description : Which of the following statement is correct ? (A) Modem is a software (B) Modem helps in stabilizing the voltage (C) Modem is the operating system (D) Modem converts the analog signal into digital signal and vice-versa

Last Answer : (D) Modem converts the analog signal into digital signal and vice-versa

The process of converting analog signals into digital signals so they can be processed by a receiving computer is referred to as: a. modulation b. demodulation c. synchronizing d. digitising

Description : The process of converting analog signals into digital signals so they can be processed by a receiving computer is referred to as: a. modulation b. demodulation c. synchronizing d. digitising

Last Answer : digitising

The process of converting analog signals into digital signals so they can be processed by a receiving computer is referred to as a. modulation b. demodulation c. synchronizing d. Digitizing

Description : The process of converting analog signals into digital signals so they can be processed by a receiving computer is referred to as a. modulation b. demodulation c. synchronizing d. Digitizing

Last Answer : b. demodulation

The primary purpose of the data modem is to A. interface analog terminal equipment to analog communications channel B. interface digital terminal equipment to analog communications channel C. interface analog terminal equipment to digital communications channel D. interface digital terminal equipment to digital communications channel

Description : The primary purpose of the data modem is to A. interface analog terminal equipment to analog communications channel B. interface digital terminal equipment to analog communications ... to digital communications channel D. interface digital terminal equipment to digital communications channel

Last Answer : B. interface digital terminal equipment to analog communications channel

In a synchronous modem, the digital-to-analog converter transmits signal to the a. equilizer b. modulator c. demodulator d. terminal e. none of aobve

Description : In a synchronous modem, the digital-to-analog converter transmits signal to the a. equilizer b. modulator c. demodulator d. terminal e. none of aobve

Last Answer : equilizer

Which of the following is not a transmission medium? (a) Telephone lines (b) Co_axial cable (c) Modem (d) Microwave system -Technology

Description : Which of the following is not a transmission medium? (a) Telephone lines (b) Co_axial cable (c) Modem (d) Microwave system -Technology

Last Answer : (c) All are communication channel but modem is a dev that convert analog signals to digital signals or vice-versa

Which of the following is not a transmission medium? a. telephone lines b. coaxial cables c. modem d. microwave systems

Description : Which of the following is not a transmission medium? a. telephone lines b. coaxial cables c. modem d. microwave systems

Last Answer : microwave systems

The pieceof hardware that converts your computer'sdigital signal to ananalog signal that cantravel over telephone lines is called (A) red wire (B) blue cord (C) tower (D) modem (E) None of these

Description : The pieceof hardware that converts your computer'sdigital signal to ananalog signal that cantravel over telephone lines is called (A) red wire (B) blue cord (C) tower (D) modem (E) None of these

Last Answer : modem

What distinguishes digital radio systems from conventional analog communications system?

Description : What distinguishes digital radio systems from conventional analog communications system?

Last Answer : the nature of the modulating signal

Data from a computer are_______; the local loop handles _______ signals. A) analog; analog B) analog; digital C) digital; digital D) digital; analog

Description : Data from a computer are_______; the local loop handles _______ signals. A) analog; analog B) analog; digital C) digital; digital D) digital; analog

Last Answer : digital; analog

Which of the following statements is NOT correct ? (A) Computer is capable of processing only digital signal (B) Computer is capable of analysing both quantitative and qualitative data (C) Appropriate software is required for processing the data (D) Computer is capable of processing digital as well as analog signals

Description : Which of the following statements is NOT correct ? (A) Computer is capable of processing only digital signal (B) Computer is capable of analysing both quantitative and qualitative data (C) Appropriate ... for processing the data (D) Computer is capable of processing digital as well as analog signals

Last Answer : Answer: A

What are the four things needed to connect to the Internet? 1) Telephone line, modem, computer, and an ISP 2) Modem, computer, PDA and ISP 3) Telephone line, PDA, modem and computer 4) monitor, keyboard, mouse, modem

Description : What are the four things needed to connect to the Internet? 1) Telephone line, modem, computer, and an ISP 2) Modem, computer, PDA and ISP 3) Telephone line, PDA, modem and computer 4) monitor, keyboard, mouse, modem

Last Answer : 1) Telephone line, modem, computer, and an ISP

What are the four things needed to connect to the Internet? 1 Telephone line, modem, computer, and an ISP 2 Modem, computer, PDA and ISP 3 Telephone line, PDA, modem and computer 4 monitor, keyboard, mouse, modem

Description : What are the four things needed to connect to the Internet? 1 Telephone line, modem, computer, and an ISP 2 Modem, computer, PDA and ISP 3 Telephone line, PDA, modem and computer 4 monitor, keyboard, mouse, modem

Last Answer : 1 Telephone line, modem, computer, and an ISP

The telephone line is connected through the ____on the computer. (1) USB (2) Modem (3) Ethernet (4) PS2

Description : The telephone line is connected through the ____on the computer. (1) USB (2) Modem (3) Ethernet (4) PS2

Last Answer : Modem

None Network Of use As a result Analog Telephone Of Place Possession By Takes Digital Telephone ?

Last Answer : Wireless Or Wireless Network Of use As a result Analog Telephone Of Place Possession By Takes Digital Telephone.

The original telephone network, which is referred to as the plainold telephone system (POTS), was an ________system. A) digital B) analog C) digital as well as analog D) none of the above

Description : The original telephone network, which is referred to as the plainold telephone system (POTS), was an ________system. A) digital B) analog C) digital as well as analog D) none of the above

Last Answer : analog

A computer system recognizes only: a) Software b) 0s and 1s c) Modem Signals d) ASCII e) None of These

Description : A computer system recognizes only: a) Software b) 0s and 1s c) Modem Signals d) ASCII e) None of These

Last Answer : b) 0s and 1s

What is the difference between analog and digital signals in Arduino?

Description : What is the difference between analog and digital signals in Arduino?

Last Answer : Analog signals in Arduino are continuous and can have any value within a range, while digital signals are discrete and can only have two states: on or off.

Digital transmission provides a higher level of signal quality than analog transmission because A. repeaters regenerate digital pulses and remove distorstion B. digital signals are easier to sample than analog signals C. digital signals are smaller than analog signals and cannot easily be distorted D. analog signals are continuous and not easily distorted.

Description : Digital transmission provides a higher level of signal quality than analog transmission because A. repeaters regenerate digital pulses and remove distorstion B. digital signals are easier to sample than ... and cannot easily be distorted D. analog signals are continuous and not easily distorted.

Last Answer : A. repeaters regenerate digital pulses and remove distorstion

_______ signals canhave only alimited number of values. A) Analog B) Digital C) (a) or (b) D) None of the above

Description : _______ signals canhave only alimited number of values. A) Analog B) Digital C) (a) or (b) D) None of the above

Last Answer : Digital

_____ signals can have an infinite number of values ina range. A) Analog B) Digital C) (a) or (b) D) None of the above

Description : _____ signals can have an infinite number of values ina range. A) Analog B) Digital C) (a) or (b) D) None of the above

Last Answer : Analog

Compared to analog signals, digital signals A. allow faster transmission B. are moreaccurate C. both (a)and (b) D. All of theabove E. None of the above

Description : Compared to analog signals, digital signals A. allow faster transmission B. are moreaccurate C. both (a)and (b) D. All of theabove E. None of the above

Last Answer : both (a)and (b)

Demodulation is aprocessof A. converting analog to digital signals B. converting digital to analogsignals C. multiplexing various signals intoone high speed line signals D. performing data description

Description : Demodulation is aprocessof A. converting analog to digital signals B. converting digital to analogsignals C. multiplexing various signals intoone high speed line signals D. performing data description

Last Answer : converting analog to digital signals

A single channel is shared by multiple signals by _____ a. analog modulation b. digital modulation c. multiplexing d. phase modulation

Description : A single channel is shared by multiple signals by _____ a. analog modulation b. digital modulation c. multiplexing d. phase modulation

Last Answer : c. multiplexing

30) Which of the following signals are essential forA. Digital signals B. Analog signals C. Both A and B D. None of the above Digital Marketing?

Description : 30) Which of the following signals are essential for Digital Marketing? A. Digital signals  B. Analog signals  C. Both A and B  D. None of the above

Last Answer : A. Digital signals

One advantage of dial-up-internet access is ___ 1) It utilises broadband technology 2) It utilizes existing telephone service 3) It uses a router for security 4) Modem speeds are very fast 5) None of these

Description : One advantage of dial-up-internet access is ___ 1) It utilises broadband technology 2) It utilizes existing telephone service 3) It uses a router for security 4) Modem speeds are very fast 5) None of these

Last Answer : Answer :2

Which one of the following allows computers to transfer data using a telephone line ? (1) Keyboard (2) CPU (3) Modem (4) Printer

Description : Which one of the following allows computers to transfer data using a telephone line ? (1) Keyboard (2) CPU (3) Modem (4) Printer

Last Answer : Modem

A modem is connected in between a telephone line and a (a) computer -Technology

Description : A modem is connected in between a telephone line and a (a) computer -Technology

Last Answer : (a) Modem is a device that enables computers and other equipment to communicate with each other using telephone lines.

Which of the following is not referred to as data terminal equipment? A. Telephone set B. Printers C. Modem D. Computer

Description : Which of the following is not referred to as data terminal equipment? A. Telephone set B. Printers C. Modem D. Computer

Last Answer : C. Modem

The local loop of the telephone system is understood to be A. a single piece of wire connecting the subscriber’s telephone set to another telephone set in an adjacent room B. a two-wire or four-wire communication circuit between the customer’s premise and central office C. a four-wire circuit connecting a facsimile machine to a computer D. a group of wires connecting a telephone set to a modem

Description : The local loop of the telephone system is understood to be A. a single piece of wire connecting the subscriber's telephone set to another telephone set in an adjacent room B. a two-wire or four- ... a facsimile machine to a computer D. a group of wires connecting a telephone set to a modem

Last Answer : B. a two-wire or four-wire communication circuit between the customer’s premise and central office

Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Description : Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Last Answer : (B) Serial

A computer Program that translates one program instruction at a time into machine language is called a/an A) Interpreter B) CPU C) Compiler D) Simulator

Description : A computer Program that translates one program instruction at a time into machine language is called a/an A) Interpreter B) CPU C) Compiler D) Simulator

Last Answer : Answer : A

A computer program that translates one program instruction one at a time into machine language is called a/an (1) Interpreter (2) Compiler (3) Simulator (4) Commander

Description : A computer program that translates one program instruction one at a time into machine language is called a/an (1) Interpreter (2) Compiler (3) Simulator (4) Commander

Last Answer : Interpreter

What is the difference between analog and digital computer ?

Description : What is the difference between analog and digital computer ?

Last Answer : Analog computer 1. Analog computers are largely dependent on external conditions. 2. It is commonly used in observational work to gather and record information. 3. Analog computers use constantly changing signals ... is shown on the screen. 5. Personal computer , mini computer , micro computer etc.

The computer that process both analog and digital is called A) Analog computer B) Digital computer C) Hybrid computer D) Mainframe computer

Description : The computer that process both analog and digital is called A) Analog computer B) Digital computer C) Hybrid computer D) Mainframe computer

Last Answer : Answer : C

Which of the following is a class of computers based on model? A) Digital Computer B) Hybrid Computers C) Analog Computers D) AT Computers

Description : Which of the following is a class of computers based on model? A) Digital Computer B) Hybrid Computers C) Analog Computers D) AT Computers

Last Answer : Answer : D

In analog computer A) Input is first converted to digital form B) Input is never converted to digital form C) Output is displayed in digital form D) All of the above

Description : In analog computer A) Input is first converted to digital form B) Input is never converted to digital form C) Output is displayed in digital form D) All of the above

Last Answer : Answer : B

A digital computer did not score over an analog computer in terms of A) Speed B) Accuracy C) Reliability D) Cost

Description : A digital computer did not score over an analog computer in terms of A) Speed B) Accuracy C) Reliability D) Cost

Last Answer : Answer : B

A hybrid computer is the one having combined properties of ________ (A) Micro & Mini computers (B) Mini & Super Computers (C) Mainframe & Super Computers (D) Analog & Digital computers

Description : A hybrid computer is the one having combined properties of ________ (A) Micro & Mini computers (B) Mini & Super Computers (C) Mainframe & Super Computers (D) Analog & Digital computers

Last Answer : (D) Analog & Digital computers

Which is true for Digital Computer: a) It is less accurate than analog computer b) It is used primarily in scientific applications c) It represents the decimal numbers through a string of binary digits d) None of The Above

Description : Which is true for Digital Computer: a) It is less accurate than analog computer b) It is used primarily in scientific applications c) It represents the decimal numbers through a string of binary digits d) None of The Above

Last Answer : b) It is used primarily in scientific applications