If the discharge of a centrifugal pump is throttled, then its suction lift (A) Increases (B) Decreases (C) Remains unchanged (D) Data insufficient to predict

If the discharge of a centrifugal pump is throttled, then its suction lift
(A) Increases
(B) Decreases
(C) Remains unchanged
(D) Data insufficient to predict
by

1 Answer

Answer :

(A) Increases
by

Related questions

The main drawback of centrifugal pump is a)necessity of priming b) discharge from pump varies with the load of water c) For high heads efficiency is low up to 50% d) the suction lift is limited to 6 metre e) all of the above*

Description : The main drawback of centrifugal pump is a)necessity of priming b) discharge from pump varies with the load of water c) For high heads efficiency is low up to 50% d) the suction lift is limited to 6 metre e) all of the above*

Last Answer : e) all of the above*

For an isothermal process, the internal energy of a gas (A) Increases (B) Decreases (C) Remains unchanged (D) Data insufficient, can't be predicted

Description : For an isothermal process, the internal energy of a gas (A) Increases (B) Decreases (C) Remains unchanged (D) Data insufficient, can't be predicted

Last Answer : (C) Remains unchanged

A centrifugal pump used to pump water is used to pump an oil withspecific gravity of 0.8 at the same rate. The power consumption will now (A) Increase (B) Decrease (C) Remain same (D) Data insufficient to predict

Description : A centrifugal pump used to pump water is used to pump an oil withspecific gravity of 0.8 at the same rate. The power consumption will now (A) Increase (B) Decrease (C) Remain same (D) Data insufficient to predict

Last Answer : (B) Decrease

When the wet steam is throttled but still remains wet at the exit of the throttle valve, then its temperature & dryness fraction respectively (A) Decreases & increases (B) Increases & increases (C) Increases & decreases (D) Decreases & decreases

Description : When the wet steam is throttled but still remains wet at the exit of the throttle valve, then its temperature & dryness fraction respectively (A) Decreases & increases (B) Increases & increases (C) Increases & decreases (D) Decreases & decreases

Last Answer : (A) Decreases & increases

A centrifugal pump loses prime after starting. The reason of this trouble may be (A) Incomplete priming (B) Too high a suction lift (C) Low available NPSH and air leaks in the suction pipe (D) All (A), (B), and (C)

Description : A centrifugal pump loses prime after starting. The reason of this trouble may be (A) Incomplete priming (B) Too high a suction lift (C) Low available NPSH and air leaks in the suction pipe (D) All (A), (B), and (C)

Last Answer : (D) All (A), (B), and (C)

Maximum theoretical suction lift for water at 15°C by a centrifugal pump is 34 ft. The same for water at 90°C will be __________ ft. (A) 40 (B) 34 (C) 8 (D) 37

Description : Maximum theoretical suction lift for water at 15°C by a centrifugal pump is 34 ft. The same for water at 90°C will be __________ ft. (A) 40 (B) 34 (C) 8 (D) 37

Last Answer : (C) 8

The net positive suction head (NPSH) of a centrifugal pump is defined as the sum of the velocity head and the pressure head at the (A) Discharge (B) Suction (C) Suction minus vapor pressure of the liquid at suction temperature (D) Discharge minus vapor pressure of the liquid at the discharge temperature

Description : The net positive suction head (NPSH) of a centrifugal pump is defined as the sum of the velocity head and the pressure head at the (A) Discharge (B) Suction (C) Suction minus vapor ... of the liquid at suction temperature (D) Discharge minus vapor pressure of the liquid at the discharge temperature

Last Answer : (C) Suction minus vapor pressure of the liquid at suction temperature

The net positive suction head (NPSH) of a centrifugal pump is defined as the sum of the velocity head and the pressure head at the (A) Discharge (B) Suction (C) Suction minus vapor pressure of the liquid at suction temperature (D) Discharge minus vapor pressure of the liquid at the discharge temperature

Description : The net positive suction head (NPSH) of a centrifugal pump is defined as the sum of the velocity head and the pressure head at the (A) Discharge (B) Suction (C) Suction minus vapor ... of the liquid at suction temperature (D) Discharge minus vapor pressure of the liquid at the discharge temperature

Last Answer : (C) Suction minus vapor pressure of the liquid at suction temperature

Foot valves are provided in the suction line of a centrifugal pump to (A) Avoid priming, every time we start the pump (B) Remove the contaminant present in the liquid (C) Minimise the fluctuation in discharge (D) Control the liquid discharge

Description : Foot valves are provided in the suction line of a centrifugal pump to (A) Avoid priming, every time we start the pump (B) Remove the contaminant present in the liquid (C) Minimise the fluctuation in discharge (D) Control the liquid discharge

Last Answer : (A) Avoid priming, every time we start the pump

In case of unsteady fluid flow, conditions & flow pattern change with the passage of time at a position in a flow situation. Which of the following is an example of unsteady flow? (A) Discharge of water by a centrifugal pump being run at a constant rpm (B) Water flow in the suction and discharge pipe of a reciprocating pump (C) Water discharge from a vertical vessel in which constant level is maintained (D) Low velocity flow of a highly viscous liquid through a hydraulically smooth pipe

Description : In case of unsteady fluid flow, conditions & flow pattern change with the passage of time at a position in a flow situation. Which of the following is an example of unsteady flow? (A) ... level is maintained (D) Low velocity flow of a highly viscous liquid through a hydraulically smooth pipe

Last Answer : (B) Water flow in the suction and discharge pipe of a reciprocating pump

Horsepower requirement for given pump capacity depends upon the (A) Specific gravity of the liquid (B) Suction lift (C) Discharge head (D) All (A), (B) and (C)

Description : Horsepower requirement for given pump capacity depends upon the (A) Specific gravity of the liquid (B) Suction lift (C) Discharge head (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

With increasing flow rate, the hydraulic efficiency of a centrifugal pump (A) Monotonically decreases (B) Decreases and then increases(C) Remains constant(D) Increases and then decreases

Description : With increasing flow rate, the hydraulic efficiency of a centrifugal pump (A) Monotonically decreases (B) Decreases and then increases (C) Remains constant (D) Increases and then decreases

Last Answer : (A) Monotonically decreases

Two fluids are flowing through two similar pipes of the same diameter. The Reynold's number is same. For the same flow rate if the viscosity of a fluid is reduced to half the value of the first fluid, the pressure drop will (A) Increase (B) Decrease (C) Remain unchanged (D) Data insufficient to predict relative pressure drop

Description : Two fluids are flowing through two similar pipes of the same diameter. The Reynold's number is same. For the same flow rate if the viscosity of a fluid is reduced to half the value of the ... (A) Increase (B) Decrease (C) Remain unchanged (D) Data insufficient to predict relative pressure drop

Last Answer : (B) Decrease

Fractional conversion __________ with increase in pressure for ammonia synthesis reaction i.e., N2 + 3H2 ⇌ 2NH3 . (A) Increases (B) Decreases (C) Remains unchanged (D) Unpredictable from the data

Description : Fractional conversion __________ with increase in pressure for ammonia synthesis reaction i.e., N2 + 3H2 ⇌ 2NH3 . (A) Increases (B) Decreases (C) Remains unchanged (D) Unpredictable from the data

Last Answer : (A) Increases

Fractional conversion __________ for an exothermic reversible chemical reaction, when the temperature is maximum. (A) Increases (B) Remains unchanged (C) Decreases (D) Unpredictable from the data

Description : Fractional conversion __________ for an exothermic reversible chemical reaction, when the temperature is maximum. (A) Increases (B) Remains unchanged (C) Decreases (D) Unpredictable from the data

Last Answer : (C) Decreases

Consider a centrifugal pump having a specific impeller diameter, fixed impeller speed pumping a liquid of constant density at a particular discharge capacity. With decrease in the capacity of the pump, the __________ decreases. (A) NPSH required (B) BHP required by the pump (C) Head of the liquid pumped (D) All (A), (B) and (C)

Description : Consider a centrifugal pump having a specific impeller diameter, fixed impeller speed pumping a liquid of constant density at a particular discharge capacity. With decrease in the capacity of the pump, the __________ decreases. (A) ... the pump (C) Head of the liquid pumped (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

If we increase the pressure on a substance (which is at its triple point), then the triple point (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Description : If we increase the pressure on a substance (which is at its triple point), then the triple point (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Last Answer : (C) Remains unchanged

Acceleration head in a reciprocating pump (A) Increases the work done during delivery stroke (B) Decreases the work done during suction stroke (C) Does not change the work requirement of the pump (D) Increases the work done during suction stroke

Description : Acceleration head in a reciprocating pump (A) Increases the work done during delivery stroke (B) Decreases the work done during suction stroke (C) Does not change the work requirement of the pump (D) Increases the work done during suction stroke

Last Answer : (C) Does not change the work requirement of the pump

If the baffle spacing in a shell and tube heat exchanger increases, then the Reynolds number of the shell side fluid (A) Remains unchanged (B) Increases (C) Increases or decreases depending on number of shell passes (D) Decreases

Description : If the baffle spacing in a shell and tube heat exchanger increases, then the Reynolds number of the shell side fluid (A) Remains unchanged (B) Increases (C) Increases or decreases depending on number of shell passes (D) Decreases

Last Answer : (D) Decreases

With increase in pressure (above atmospheric pressure), the Cp of a gas (A) Increases (B) Decreases (C) Remains unchanged (D) First decreases and then increases

Description : With increase in pressure (above atmospheric pressure), the Cp of a gas (A) Increases (B) Decreases (C) Remains unchanged (D) First decreases and then increases

Last Answer : (A) Increases

Specific speed of a centrifugal pump depends upon the __________ head. (A) Suction (B) Delivery (C) Manometric (D) None of these

Description : Specific speed of a centrifugal pump depends upon the __________ head. (A) Suction (B) Delivery (C) Manometric (D) None of these

Last Answer : (D) None of these

Net positive suction head (NPSH) of a centrifugal pump must be (A) Greater than the vapour pressure of the liquid (B) Less than the vapour pressure of the liquid(C) Equal to the vapour pressure of the liquid(D) Less than barometric pressure

Description : Net positive suction head (NPSH) of a centrifugal pump must be (A) Greater than the vapour pressure of the liquid (B) Less than the vapour pressure of the liquid (C) Equal to the vapour pressure of the liquid (D) Less than barometric pressure

Last Answer : (A) Greater than the vapour pressure of the liquid

What causes cavitation in centrifugal pump? (A) High suction pressure (B) Low barometric pressure(C) Low suction pressure(D) High suction velocity

Description : What causes cavitation in centrifugal pump? (A) High suction pressure (B) Low barometric pressure (C) Low suction pressure (D) High suction velocity

Last Answer : (C) Low suction pressure

Cavitation occurs in a centrifugal pump when the suction pressure is (A) Less than the vapour pressure of the liquid at that temperature (B) Greater than the vapour pressure of the liquid at that temperature (C) Equal to the vapour pressure (D) Equal to the developed head

Description : Cavitation occurs in a centrifugal pump when the suction pressure is (A) Less than the vapour pressure of the liquid at that temperature (B) Greater than the vapour pressure of the liquid at that temperature (C) Equal to the vapour pressure (D) Equal to the developed head

Last Answer : (A) Less than the vapour pressure of the liquid at that temperature

What is the maximum theoretical suction lift (metres) of a reciprocating pump? (A) 5 (B) 10(C) 50 (D) 100

Description : What is the maximum theoretical suction lift (metres) of a reciprocating pump? (A) 5 (B) 10(C) 50 (D) 100

Last Answer : (B) 10

In a consolidated drained test on a normally consolidated clay, the volume of the soil sample during shear (A) Decreases (B) Increases (C) Remains unchanged (D) First increases and then decreases

Description : In a consolidated drained test on a normally consolidated clay, the volume of the soil sample during shear (A) Decreases (B) Increases (C) Remains unchanged (D) First increases and then decreases

Last Answer : (A) Decreases

A source produces sound waves under water. Waves travel through water and then into air. Which of the following statements about the frequency (f) and the wavelength () is correct and sound passes from water to air? (1) f remains unchanged but  decreases. (2) f remains unchanged but  increases. (3)  remains unchanged but f decreases. (4)  remains unchanged but f increases.

Description : A source produces sound waves under water. Waves travel through water and then into air. Which of the following statements about the frequency (f) and the wavelength () is correct and sound passes from ... increases. (3)  remains unchanged but f decreases. (4)  remains unchanged but f increases.

Last Answer : 3)  remains unchanged but f decreases.

Delivery of insufficient quantity of liquid by a pump may be caused by (A) Air leak in the inlet (B) Low rpm (C) Too high a lift (D) All (A), (B) and (C)

Description : Delivery of insufficient quantity of liquid by a pump may be caused by (A) Air leak in the inlet (B) Low rpm (C) Too high a lift (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

For gases, the thermal conductivity increases with temperature rise. For liquids, with increase in concentration, its thermal conductivity generally (A) Decreases (B) Increases (C) Remains unchanged (D) Increases exponentially

Description : For gases, the thermal conductivity increases with temperature rise. For liquids, with increase in concentration, its thermal conductivity generally (A) Decreases (B) Increases (C) Remains unchanged (D) Increases exponentially

Last Answer : (A) Decreases

With increase in temperature, the thermal conductivity of fresh lubricating oil (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on its composition

Description : With increase in temperature, the thermal conductivity of fresh lubricating oil (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on its composition

Last Answer : (B) Decreases

During electrical desalting of crude oil, the electrical conductivity of a mixture of crude oil and water (which ranges between 3 to 8% water) __________ with increase in the amount of water. (A) Decreases (B) Increases (C) Remains unchanged (D) Decreases linearly

Description : During electrical desalting of crude oil, the electrical conductivity of a mixture of crude oil and water (which ranges between 3 to 8% water) __________ with increase in the amount of water. (A) Decreases (B) Increases (C) Remains unchanged (D) Decreases linearly

Last Answer : (B) Increases

Production rate __________ with increased fineness, with a given energy input to the size reduction machine. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the machine

Description : Production rate __________ with increased fineness, with a given energy input to the size reduction machine. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the machine

Last Answer : (A) Decreases

With increase in the capacity of screens, the screen effectiveness (A) Remains unchanged (B) Increases (C) Decreases (D) Decreases exponentially

Description : With increase in the capacity of screens, the screen effectiveness (A) Remains unchanged (B) Increases (C) Decreases (D) Decreases exponentially

Last Answer : (C) Decreases

As the impurities are oxidised, the melting point of iron (A) Decreases (B) Remains unchanged (C) Increases (D) May increase or decrease; unpredictable

Description : As the impurities are oxidised, the melting point of iron (A) Decreases (B) Remains unchanged (C) Increases (D) May increase or decrease; unpredictable

Last Answer : (C) Increases

With increase in absolute humidity, the dew point of an unsaturated mixture of air and water vapor (at constant pressure and temperature). (A) Increases (B) Remains unchanged (C) Decreases (D) Decreases linearly

Description : With increase in absolute humidity, the dew point of an unsaturated mixture of air and water vapor (at constant pressure and temperature). (A) Increases (B) Remains unchanged (C) Decreases (D) Decreases linearly

Last Answer : (A) Increases

In a counter-current extractor, as the axial mixing increases, the extraction efficiency (A) Increases (B) Decreases (C) Remains unchanged (D) Depends on the pressure of the system

Description : In a counter-current extractor, as the axial mixing increases, the extraction efficiency (A) Increases (B) Decreases (C) Remains unchanged (D) Depends on the pressure of the system

Last Answer : (B) Decreases

If the amount of the steam used in steam distillation is increased, the temperature of distillation (A) Increases (B) Decreases (C) Remains unchanged (D) Depends on relative volatility

Description : If the amount of the steam used in steam distillation is increased, the temperature of distillation (A) Increases (B) Decreases (C) Remains unchanged (D) Depends on relative volatility

Last Answer : (B) Decreases

With increase in the concentration of the adsorbate, the integral heat of adsorption (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the type of adsorbate

Description : With increase in the concentration of the adsorbate, the integral heat of adsorption (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the type of adsorbate

Last Answer : (B) Decreases

At a given equilibrium pressure, with increase in temperature, the concentration of adsorbed gas on solid adsorbent (A) Increases (B) Decreases (C) Remains unchanged (D) Increases exponentially

Description : At a given equilibrium pressure, with increase in temperature, the concentration of adsorbed gas on solid adsorbent (A) Increases (B) Decreases (C) Remains unchanged (D) Increases exponentially

Last Answer : (B) Decreases

With increase in temperature, the mutual solubility of two liquids (A) Increases (B) Decreases (C) Remains unchanged (D) Decreases exponentially

Description : With increase in temperature, the mutual solubility of two liquids (A) Increases (B) Decreases (C) Remains unchanged (D) Decreases exponentially

Last Answer : (A) Increases

In extraction, as the temperature increases, the area of heterogeneity (area covered by binodal curve) (A) Decreases (B) Increases (C) Remains unchanged (D) None of these

Description : In extraction, as the temperature increases, the area of heterogeneity (area covered by binodal curve) (A) Decreases (B) Increases (C) Remains unchanged (D) None of these

Last Answer : (A) Decreases

The boiling points of pure components of a binary system __________ with increase in total pressure of the system. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease, depends on the system

Description : The boiling points of pure components of a binary system __________ with increase in total pressure of the system. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease, depends on the system

Last Answer : (B) Increases

With increase in the liquid flow rate at a fixed gas velocity in a randomly packed counter current gas-liquid absorption column, the gas pressure drop (A) Decreases (B) Remains unchanged (C) Increases (D) Decreases exponentially

Description : With increase in the liquid flow rate at a fixed gas velocity in a randomly packed counter current gas-liquid absorption column, the gas pressure drop (A) Decreases (B) Remains unchanged (C) Increases (D) Decreases exponentially

Last Answer : (C) Increases

With increase in temperature, the thermal conductivity of steel (A) Increases (B) Decreases (C) Remains unchanged (D) Increases exponentially

Description : With increase in temperature, the thermal conductivity of steel (A) Increases (B) Decreases (C) Remains unchanged (D) Increases exponentially

Last Answer : (B) Decreases

With the increase of temperature, the Col-burn jH factor (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depending on temperature

Description : With the increase of temperature, the Col-burn jH factor (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depending on temperature

Last Answer : (A) Increases

Thermal conductivities of most of the liquids __________ with rise in temperature.(A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the liquid

Description : Thermal conductivities of most of the liquids __________ with rise in temperature. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the liquid

Last Answer : (B) Decreases

With increase in porosity, the thermal conductivity of a solid substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the solid

Description : With increase in porosity, the thermal conductivity of a solid substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the solid

Last Answer : (B) Decreases

Thermal conductivity of a gas at low density, __________ with increase in temperature. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Description : Thermal conductivity of a gas at low density, __________ with increase in temperature. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Last Answer : (B) Increases

With increase in the ratio of orifice diameter to pipe diameter, the fraction of the orifice pressure differential that is permanently lost (A) Increases(B) Decreases(C) Remains unchanged(D) Increases exponentially

Description : With increase in the ratio of orifice diameter to pipe diameter, the fraction of the orifice pressure differential that is permanently lost (A) Increases (B) Decreases (C) Remains unchanged (D) Increases exponentially

Last Answer : (B) Decreases

Bulk diffusion in catalyst pore __________ with increase in pressure. (A) Increases (B) Decreases (C) Remains unchanged (D) Increases exponentially

Description : Bulk diffusion in catalyst pore __________ with increase in pressure. (A) Increases (B) Decreases (C) Remains unchanged (D) Increases exponentially

Last Answer : (B) Decreases