______ refers to the physical or logicalarrangement of a network. A) Data flow B) Mode ofoperation C) Topology D) None of the above

______ refers to the physical or logicalarrangement of a network.
A)
Data flow
B)
Mode ofoperation
C)
Topology
D)
None of the above
by

1 Answer

Answer :

Topology
by

Related questions

Physical or logical arrangement of network is __________ a) Topology b) Routing c) Networking d) Control

Description : Physical or logical arrangement of network is __________ a) Topology b) Routing c) Networking d) Control

Last Answer : a) Topology

The physical layer translates logical communication requests from the ______ into hardware specific operations. a. data link layer b. network layer c. trasnport layer d. application layer

Description : The physical layer translates logical communication requests from the ______ into hardware specific operations. a. data link layer b. network layer c. trasnport layer d. application layer

Last Answer : a. data link layer

________ is actually a multiport repeater. It is normally usedto createconnections between stations in a physical star topology. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Description : ________ is actually a multiport repeater. It is normally usedto createconnections between stations in a physical star topology. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : An activehub

FDDI used which type of physical topology? A) Bus B) Ring C) Star D) Tree

Description : FDDI used which type of physical topology? A) Bus B) Ring C) Star D) Tree

Last Answer : B) Ring

Which network topology is consideredpassive? A. Cross B. Ring C. Star D. Mesh E. Bus

Description : Which network topology is consideredpassive? A. Cross B. Ring C. Star D. Mesh E. Bus

Last Answer : Bus

Which of the following is/ are the drawbacks of Ring Topology? A) Failure of one computer, can affect the whole network B) Adding or removing the computers disturbs the network activity. C) If the central hub fails, the whole network fails to operate. D) Both of A and B

Description : Which of the following is/ are the drawbacks of Ring Topology? A) Failure of one computer, can affect the whole network B) Adding or removing the computers disturbs the network activity. C) If the central hub fails, the whole network fails to operate. D) Both of A and B

Last Answer : D) Both of A and B

State whether the following is True or False. i) In bus topology, heavy Network traffic slows down the bus speed. ii) It is multipoint configuration. A) True, True B) B) True, False C) False, True D) False, False

Description : State whether the following is True or False. i) In bus topology, heavy Network traffic slows down the bus speed. ii) It is multipoint configuration. A) True, True B) B) True, False C) False, True D) False, False

Last Answer : A) True, True

In a topology, if there are n devices in a network, each device has n-1 ports for cables. A) Mesh B) Star C) Bus D) Ring

Description : In a topology, if there are n devices in a network, each device has n-1 ports for cables. A) Mesh B) Star C) Bus D) Ring

Last Answer : A) Mesh

What is the name of the network topology in which there are bi- directional links between eachpossible node? A) Ring B) Star C) Tree D) Mesh

Description : What is the name of the network topology in which there are bi- directional links between eachpossible node? A) Ring B) Star C) Tree D) Mesh

Last Answer : D) Mesh

Dynamic routing protocol enable routers to a. Dynamically discover and maintain routes b. Distribute routing updates to other routers c. Reach agreement with other routers about the network topology d. All of the above

Description : Dynamic routing protocol enable routers to a. Dynamically discover and maintain routes b. Distribute routing updates to other routers c. Reach agreement with other routers about the network topology d. All of the above

Last Answer : d. All of the above

Which one is not a network topology? a. Star b. Ring c. Bus d. Peer to Peer

Description : Which one is not a network topology? a. Star b. Ring c. Bus d. Peer to Peer

Last Answer : d. Peer to Peer

In which topology, if a computer’s network cable is broken, whole network goes down. a. Ring b. Star c. Bus d. token ring

Description : In which topology, if a computer’s network cable is broken, whole network goes down. a. Ring b. Star c. Bus d. token ring

Last Answer : c. Bus

Which network topology requires a central controller or hub? a) Star b) Mesh c) Ring d) Bus

Description : Which network topology requires a central controller or hub? a) Star b) Mesh c) Ring d) Bus

Last Answer : a) Star

The network topology that is bi-directional links between each possible node. a. Star b. Mesh c. Bus d. Ring

Description : The network topology that is bi-directional links between each possible node. a. Star b. Mesh c. Bus d. Ring

Last Answer : b. Mesh

The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram ... IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : thedestination IP address in the datagram header

If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : the IP address of therouter found inthe routing table

The ability of a single network to span multiple physical networks is known as ______ a. Subnettingb. Masking c. Fragmenting d. Hopping

Description : The ability of a single network to span multiple physical networks is known as ______ a. Subnetting b. Masking c. Fragmenting d. Hopping

Last Answer : a. Subnetting

______ refers totwo characteristics: when data should be sent and how fast it can be sent. A) Semantics B) Syntax C) Timing D) none of the above

Description : ______ refers totwo characteristics: when data should be sent and how fast it can be sent. A) Semantics B) Syntax C) Timing D) none of the above

Last Answer : Timing

The overall heat transfer co-efficient for a shell and tube heat exchangerfor clean surfaces is U0 = 400 W/m2.K. The fouling factor after one year ofoperation is found to be hd0 = 2000 W/m2.K. The overall heat transfer co￾efficient at this time is(A) 1200 W/m2.K(B) 894 W/m2.K(C) 333 W/m2.K(D) 287 W/m2.K

Description : The overall heat transfer co-efficient for a shell and tube heat exchangerfor clean surfaces is U0 = 400 W/m2 .K. The fouling factor after one year of operation is found to be hd0 = 2000 W/m2 .K. The overall heat transfer co￾efficient ... 1200 W/m2 .K (B) 894 W/m2 .K (C) 333 W/m2 .K (D) 287 W/m2 .K

Last Answer : (C) 333 W/m2 .K

Touse a cable network for data transmission, we needtwo keydevices:a ______ and a _________ A) CM; CMS B) CT; CMTS C) CM; CMTS D) none of the above

Description : Touse a cable network for data transmission, we needtwo keydevices:a ______ and a _________ A) CM; CMS B) CT; CMTS C) CM; CMTS D) none of the above

Last Answer : CM; CMS

The _______ layer of Ethernet consistsof the LLC sublayer and the MAC sublayer. A) data link B) physical C) network D) none of the above

Description : The _______ layer of Ethernet consistsof the LLC sublayer and the MAC sublayer. A) data link B) physical C) network D) none of the above

Last Answer : data link

A repeater is a connecting devicethat operates in the _______ layer of theInternet model. A) physical B) data link C) network D) all of theabove

Description : A repeater is a connecting devicethat operates in the _______ layer of theInternet model. A) physical B) data link C) network D) all of theabove

Last Answer : physical

Circuit switching takes place at the________ layer. A) data line B) physical C) network D) transport

Description : Circuit switching takes place at the________ layer. A) data line B) physical C) network D) transport

Last Answer : physical

The routing processor of arouter performs the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Description : The routing processor of arouter performs the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Last Answer : network

The inputand output portsof a router perform the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Description : The inputand output portsof a router perform the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Last Answer : physical and data link

The TCP/IP _______ layer is equivalent to the combined session, presentation, and application layers of the OSI model. a.data link b.network c.physical d.application

Description : The TCP/IP _______ layer is equivalent to the combined session, presentation, and application layers of the OSI model. a.data link b.network c.physical d.application

Last Answer : d.application

Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Description : Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Last Answer : a. network layer

Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Description : Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Last Answer : a. network layer

In the TCP/IP protocol architecture, the Network Access Layer includes ………………………………...layers of the OSI Reference Model. A. presentation, session, applicationB. physical, data link, network C. data link, network D. physical, data link

Description : In the TCP/IP protocol architecture, the Network Access Layer includes ………………………………...layers of the OSI Reference Model. A. presentation, session, application B. physical, data link, network C. data link, network D. physical, data link

Last Answer : B. physical, data link, network

The purpose of a proxy server is to control exchange of data between the two networks at …………..instead of ……….. A. an application level , an IP level B. network layer, physical layer C. an application layer, physical layer D. Network layer , an application layer

Description : The purpose of a proxy server is to control exchange of data between the two networks at …………..instead of ……….. A. an application level , an IP level B. network layer, physical layer C. an application layer, physical layer D. Network layer , an application layer

Last Answer : A. an application level , an IP level

Data Link Control Protocol (HDLC) is implemented at the ……… A. Data link layer B. Network layer C. transport layer D. Physical layer

Description : Data Link Control Protocol (HDLC) is implemented at the ……… A. Data link layer B. Network layer C. transport layer D. Physical layer

Last Answer : A. receive sliding window.

The _______ layer provides a well defined service interface to the network layer, determining how the bits of the physical layer are grouped into frames A. Data Link B. Physical C. Network D. Session

Description : The _______ layer provides a well defined service interface to the network layer, determining how the bits of the physical layer are grouped into frames A. Data Link B. Physical C. Network D. Session

Last Answer : A. Data Link

Transport layer aggregates data from different applications into a single stream before passing it to ____________ A. network layer B. data link layer C. application layer D. physical layer

Description : Transport layer aggregates data from different applications into a single stream before passing it to ____________ A. network layer B. data link layer C. application layer D. physical layer

Last Answer : A. network layer

The physical address to each machine is provided by which layer in an OSI reference model? A. Physical layer B. Data Link Layer C. Network Layer D. Transport Layer

Description : The physical address to each machine is provided by which layer in an OSI reference model? A. Physical layer B. Data Link Layer C. Network Layer D. Transport Layer

Last Answer : B. Data Link Layer

The physical address to each machine is provided by which layer in an OSI reference model? A. Physical layer B. Data Link Layer C. Network Layer D. Transport Layer

Description : The physical address to each machine is provided by which layer in an OSI reference model? A. Physical layer B. Data Link Layer C. Network Layer D. Transport Layer

Last Answer : B. Data Link Layer

The _______ layer ensures reliable transmission on a single link A. network B. physical C. data link D. transport

Description : The _______ layer ensures reliable transmission on a single link A. network B. physical C. data link D. transport

Last Answer : C. data link

The data link layer takes the packets from _________ and encapsulates them into frames for transmission. a) network layer b) physical layer c) transport layer d) application layer

Description : The data link layer takes the packets from _________ and encapsulates them into frames for transmission. a) network layer b) physical layer c) transport layer d) application layer

Last Answer : a) network layer

In OSI model at which layer modulator/demodulators are used? A. data link layer B. network layer C. session layer D. physical Layer

Description : In OSI model at which layer modulator/demodulators are used? A. data link layer B. network layer C. session layer D. physical Layer

Last Answer : D. physical Layer

The layer that transmits data in the form of bit streams using electrical and mechanicalsystems is in the OSI model. a. Physical layer b. Transport Layer c. Network Layer d. Data Link Layer

Description : The layer that transmits data in the form of bit streams using electrical and mechanicalsystems is in the OSI model. a. Physical layer b. Transport Layer c. Network Layer d. Data Link Layer

Last Answer : a. Physical layer

Choose the correct layer numbers and names of the OSI model below. a. Layer 3 - Network Layer, Layer 2 - Data Link Layer, Layer 1 - Physical Layer b. Layer 7 - Application Layer, Layer 6 - Presentation Layer c. Layer 5 - Session Layer, Layer 4 - Transport Layerd. All given options

Description : Choose the correct layer numbers and names of the OSI model below. a. Layer 3 - Network Layer, Layer 2 - Data Link Layer, Layer 1 - Physical Layer b. Layer 7 - Application Layer, Layer 6 - Presentation Layer c. Layer 5 - Session Layer, Layer 4 - Transport Layer d. All given options

Last Answer : d. All given options

In astar-topology Ethernet LAN, _______ is just a point where the signals coming from different stations collide; it is thecollision point. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Description : In astar-topology Ethernet LAN, _______ is just a point where the signals coming from different stations collide; it is thecollision point. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : A passivehub

A bridge can use the _________algorithm tocreate aloopless topology. A) binary tree B) spanning tree C) multiway tree D) none of the abov

Description : A bridge can use the _________algorithm tocreate aloopless topology. A) binary tree B) spanning tree C) multiway tree D) none of the abov

Last Answer : spanning tree

Devices may bearrangedin a _____ topology. A) mesh B) ring C) bus D) all of theabove

Description : Devices may bearrangedin a _____ topology. A) mesh B) ring C) bus D) all of theabove

Last Answer : all of theabove

Which topology requires a multipoint connection? A) Mesh B) Star C) Bus D) Ring

Description : Which topology requires a multipoint connection? A) Mesh B) Star C) Bus D) Ring

Last Answer : Bus

Which topology requires acentral controller or hub? A) Mesh B) Star C) Bus D) Ring

Description : Which topology requires acentral controller or hub? A) Mesh B) Star C) Bus D) Ring

Last Answer : Star

Which of the following is the logical topology? A) Bus B) Tree C) Star D) Both A and B

Description : Which of the following is the logical topology? A) Bus B) Tree C) Star D) Both A and B

Last Answer : C) Star

In mesh topology, relationship between one device and another is .............. A) Primary to peer B) Peer to primary C) Primary to secondary D) Peer to Peer

Description : In mesh topology, relationship between one device and another is .............. A) Primary to peer B) Peer to primary C) Primary to secondary D) Peer to Peer

Last Answer : D) Peer to Peer

If all devices are connected to a central hub, then topology is called A) Bus Topology B) Ring Topology C) Star Topology D) Tree Topology

Description : If all devices are connected to a central hub, then topology is called A) Bus Topology B) Ring Topology C) Star Topology D) Tree Topology

Last Answer : C) Star Topology

__________ do not take their decisions on measurements or estimates of the current traffic and topology. a. Static algorithms b. Adaptive algorithms c. Non - adaptive algorithms d. Recursive algorithms

Description : __________ do not take their decisions on measurements or estimates of the current traffic and topology. a. Static algorithms b. Adaptive algorithms c. Non - adaptive algorithms d. Recursive algorithms

Last Answer : c. Non - adaptive algorithms

Find the best suitable topology for large businesses which must capable to control and coordinate the operation of distributed branch outlets? a. Ring b. Local area c. Hierarchical d. Star

Description : Find the best suitable topology for large businesses which must capable to control and coordinate the operation of distributed branch outlets? a. Ring b. Local area c. Hierarchical d. Star

Last Answer : d. Star