Description : In ______, the chanceof collisioncan be reduced if a station senses the medium beforetrying touse it. A) MA B) CSMA C) FDMA D) CDMA
Last Answer : CSMA
Description : Thestandard for datatransmission over an HFC network is called _______. A) MCNS B) DOCSIS C) CMTS D) ADSL
Last Answer : DOCSIS
Description : The data link layer takes the packets from _________ and encapsulates them into frames for transmission. a) network layer b) physical layer c) transport layer d) application layer
Last Answer : a) network layer
Description : What kind of transmission medium is most appropriate to carry data in a computer network that is exposed to electrical interferences? a) Unshielded twisted pair b) Optical fiber c) Coaxial cable d) Microwave
Last Answer : b) Optical fiber
Description : In cable modem internet access, cable modem terminations system (CMTS) is at: a) cable provider's end b) customer end c) Both of Above d) None of The Above
Last Answer : c) Both of Above
Description : The secondgeneration of cable networks is called a(n) _________ network. A) HFC B) HCF C) CFH D) none of the above
Last Answer : HFC
Description : In a token ring network the transmission speed is 10^7 bps and the propagation speed is 200 metres/micro second. The 1- bit delay in this network is equivalent to: a. 500 metres of cable. b. 200 metres of cable. c. 20 metres of cable. d. 50 metres of cable
Last Answer : c. 20 metres of cable.
Description : Which transmission media provides the highest transmission speed in a network? a. coaxial cable b. twisted pair cable c. optical fiber d. electrical cable
Last Answer : c. optical fiber
Description : Which transmission media provides the highest transmission speed in a network? a) coaxial cable b) twisted pair cable c) optical fiber d) electrical cable
Last Answer : c) optical fiber
Description : A traditional cable TV network transmits signals ______. A) upstream B) downstream C) upstream and downstream D) none of the above
Last Answer : downstream
Description : ______ cable is used for voice and data communications. A) Coaxial B) Fiber-optic C) Twisted-pair D) none of the above
Last Answer : Twisted-pair
Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000
Last Answer : d. 20000
Description : Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above
Last Answer : a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame
Description : Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above
Last Answer : one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size
Description : The performance of data communications network depends on .............. A) Number of users B) The hardware and software C) The transmission D) All of the above
Last Answer : D) All of the above
Description : The _______ layer ensures reliable transmission on a single link A. network B. physical C. data link D. transport
Last Answer : C. data link
Description : ______ refers to the physical or logicalarrangement of a network. A) Data flow B) Mode ofoperation C) Topology D) None of the above
Last Answer : Topology
Description : The physical layer translates logical communication requests from the ______ into hardware specific operations. a. data link layer b. network layer c. trasnport layer d. application layer
Last Answer : a. data link layer
Description : _________ uses thin coaxial cable. A) 10Base5 B) 10Base2 C) 10Base-T D) 10Base-F
Last Answer : 10Base2
Description : Transport layer is implemented in _________ a. End system b. NIC c. Ethernet d. Signal transmission
Last Answer : a. End system
Description : Inthe _________ method, a special packet called a ______ circulates through the ring. A) reservation: control frame B) polling: poll request C) token passing: token D) none of the above
Last Answer : token passing: token
Description : ______ cable consists of an inner copper core and asecond conductingouter sheath. A) Twisted-pair B) Coaxial C) Fiber-optic D) Shielded twisted-pair
Last Answer : Coaxial
Description : Where Portion sample tests(test piece) should be conducted? (i) At desire by RDSO (ii) At Zonal CMT’s organisation or the Flash Butt Welding plant. * (iii) In RDSO campus (iv) As decided by in charge of the plant
Last Answer : At Zonal CMT’s organisation or the Flash Butt Welding plant.
Description : If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS
Last Answer : c. 32 Kbps
Description : In Bluetooth, multiple ________ form a network called a _________. A) scatternet; piconets B) piconets: scatternet C) piconets:bluenet D) bluenet; scatternet
Last Answer : piconets: scatternet
Description : A _________ network is across between a circuit-switchednetworkand a datagram network. It has some characteristics ofboth. A) virtual-circuit B) packet-switched C) frame-switched D) none of the above
Last Answer : virtual-circui
Description : A ring SONET network can be _________. A) unidirectional B) bidirectional. C) either (a) or (b) D) neither (a) nor (b)
Last Answer : bidirectional.
Description : ICMP is a _________ layer protocol. A) datalink B) transport C) network D) noneof the above
Last Answer : network
Description : Congestion control can control traffic entry into a telecommunications network, so to avoid _________ a. Congestive connection b. Connection collapse c. Congestive collapse d. Collapse congestive
Last Answer : c. Congestive collapse
Description : Network layer protocol exits in _________ a. Host b. Switches c. Packets d. Bridges
Last Answer : a. Host
Description : A network router joins two _________ together? A. Computers B. Switches C. Networks D. Gateway
Last Answer : C. Networks
Description : A _________ sine wave is not useful in data communications; we need to send a _______signal. A) composite; single-frequency B) single-frequency; composite C) single-frequency;double-frequency D) none of the above
Last Answer : single-frequency; composite
Description : ______ finds the value of thesignal amplitudefor eachsample; ____ finds the change from the previous sample. A) DM; PCM B) PCM; DM C) DM; CM D) none of the abov
Last Answer : PCM; DM
Description : The HFC network uses _______ cable. A) twisted-pair B) coaxial C) fiber-optic D) acombination of (b) and (c)
Last Answer : fiber-optic
Description : was the first step in the evolution of Ethernet from a coaxial cable bus to hub managed, twisted pair network. a. Star LAN b. Ring LAN c. Mesh LAN d. All of the above
Last Answer : a. Star LAN
Description : The computer network is A) Network computer with cable B) Network computer without cable C) Both of the above D) None of the above
Last Answer : C) Both of the above
Description : The minimum frame size required for a CSMA/CD based computer network running at 1 Gbps on a 200m cable with a link speed of 2 × 108m/s is a. 125 bytes b. 250 bytes c. 500 bytes d. None of these
Last Answer : b. 250 bytes
Description : In which topology, if a computer’s network cable is broken, whole network goes down. a. Ring b. Star c. Bus d. token ring
Last Answer : c. Bus
Description : S/NET is another kind of ………….network with an ………….for switching. A. fiber optic, active star B. active star , fiber optic C. twisted cable, active network D. active network, twisted cable
Last Answer : A. fiber optic, active star
Description : Transmission media lie below the_______ layer. A) physical B) network C) transport D) application
Last Answer : physical
Description : Which of the following statements is correct for the use of packet switching? A. the subdivision of information into individuallyaddressed packets in conjunction with alternativerouting arrangementenabled the transmission path ... capacity could be achieved. D. All of theabove E. None of the above
Last Answer : All of theabove
Description : Consider a source computer(S) transmitting a file of size 106 bits to a destination computer (D)over a network of two routers (R1 and R2) and three links(L1, L2, and L3). L1connects S to R1; L2 connects R1 to ... file from S to D? a. 1005 ms b. 1010 ms c. 3000 ms d. 3003 ms Answer: Option(a)
Last Answer : a. 1005 ms
Description : Transmission media lie below thelayer. a. transport b. application c. physical d. network
Last Answer : c. physical
Description : Theprotocol that isused for signaling in the telephone network is called ______. A) POP B) SSS C) SS7 D) none of the above
Last Answer : SS7
Description : The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram ... IP address of therouter found inthe routing table C) either a or b D) noneof the above
Last Answer : thedestination IP address in the datagram header
Description : If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above
Last Answer : the IP address of therouter found inthe routing table
Description : A pure ALOHA Network transmits 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is ______. a. 0.384 b. 0.184 c. 0.286 d. 0.58
Last Answer : b. 0.184
Description : The ability of a single network to span multiple physical networks is known as ______ a. Subnetting b. Masking c. Fragmenting d. Hopping
Last Answer : a. Subnetting
Description : The equivalent diameter of channel of a constant non-circular crosssection of 3 cm by 6 cm will be __________ cms. (A) 20 (B) 12 (C) 8 (D) 2
Last Answer : (D) 2
Description : Following is (are) the tool(s) for changing a process (A)Change Management System (CMS) (B)Configuration Management (CM) (C)Both (A) and (B) (D)None of the above
Last Answer : (C)Both (A) and (B)