Description : _______ isa dynamic mapping protocol in which a physical address is found for agiven logicaladdress. A) ARP B) RARP C) botha and b D) noneof the above
Last Answer : ARP
Description : State weather the following statement is true or false for Internetwork layer. 1).Other internetwork-layer protocols are IP, ICMP, IGMP, ARP, and RARP. 2). Internet Protocol (IP) is the least important protocol in this layer ... 3.true C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false
Last Answer : B. 1. true, 2. false, 3.true
Description : The ………………………. protocol was originally developed as a mechanism to enable diskless hosts to be remotely booted over a network as workstations. A. RARP B. ARP C. DHCP D. BOOTP
Last Answer : D. BOOTP
Description : A _______is an ARP thatacts on behalf of a set of hosts. A) ARP B) RARP C) proxy ARP D) noneof the above
Last Answer : proxy ARP
Description : . A technique called______ isused tocreate a subnetting effect. A) ARP B) RARP C) proxy ARP D) noneof the above
Description : Give the name of protocols used by different layers of TCP/IP. Discuss the function of ARP and RARP.
Last Answer : TCP/IP Model contains following layer. 1) Host-to-Network Layer - It defines characteristics of transmission media. It also concern with delivery of data when two systems are attached to same network ... such broadcasts are not forwarded by routers, so a RARP server is needed on each network.
Description : Which protocol does HTTP (Hyper Text Transfer Protocol) - use for transferring web pages at the Transport layer a. IP b. UDP c. TCP d. ARP
Last Answer : c. TCP
Description : _______ is the protocol suite for thecurrent Internet. A) TCP/IP B) NCP C) UNIX D) ACM
Last Answer : TCP/IP
Description : In the TCP/IP protocol suite, which one of the following is NOT part of the IP header? a. Fragment Offset b. Source IP address c. Destination IP address d. Destination port number
Last Answer : d. Destination port number
Description : …………………………………. converts a physical network address into an IP address. A. ARP B. RARP C. DNS D. DHCP
Last Answer : B. RARP
Description : ………………….. is responsible for converting the higher level protocol addresses (IP addresses) to physical network addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)
Last Answer : A) Address Resolution Protocol (ARP)
Description : The _______ is a dynamic mapping protocol in which a physical address is found for a given logical address. A. ARP B. RARP C. both a and b D. none of the above
Description : The term ________ means that IP provides no error checking or tracking. IP assumes the unreliabilityof the underlying layers and does its best to get a transmission throughto its destination,but with ... ) reliable delivery B) connection-oriented delivery C) best-effort delivery D) noneof the above
Last Answer : best-effort delivery
Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) ... C) ii, iii, iv and v only D) All i, ii, iii, iv and v
Last Answer : D) All i, ii, iii, iv and v
Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only
Last Answer : D) All i, ii, iii, iv and v only
Description : Which protocol does switch use at the layer 2 for finding MAC address? a. ICMP b. UDP c. ARP d. TCP
Last Answer : c. ARP
Description : FTP utilizes TCP/IP protocol suite. -Technology
Last Answer : True FTP is the easiest way to transfer files between computers via an Internet and utilizes TCP (Transmission Control Protocol)/IP (Internet Protocol) systems to perform uploading and downloading tasks.
Description : There are two processes to pair MAC address with IP addresses. Which process finds an IP address from a MAC address? * RARP * ARP * RIP * IGRP
Last Answer : Correct answer: A ARP (Address Resolution Protocol) maps an IP address to the MAC address, RARP (Reverse Address Resolution Protocol) maps the MAC address to the IP address. ARP and RARP work at the internet layer of the Internet Model or the network layer of the OSI model.
Description : ........ is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)
Last Answer : D) Internet Control Message Protocol (ICMP)
Description : ........... is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)
Description : Which of the following statement is incorrect? A. The Addresses Resolution Protocol, ARP, allows a host to find the physicaladdress ofa target host on the samephysical network, given only the target IP address. ... -addresses of our choice to every machine. D. All of theabove E. None of the above
Last Answer : All of theabove
Description : The address resolution protocol (ARP) is used for a. Finding the IP address from the DNS b. Finding the IP address of the default gateway c. Finding the IP address that corresponds to a MAC address d. Finding the MAC address that corresponds to an IP address
Last Answer : Finding the MAC address that corresponds to an IP address
Description : Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? a. ARQ (Automatic Repeat Request) b. ARP (Address Resolution Protocol) c. SLIP (Serial Line Internet Protocol) d. PLIP (Parallel Line Internet Protocol)
Last Answer : b. ARP (Address Resolution Protocol)
Description : Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? A. ARQ Automatic Repeat Request B. ARP Address Resolution Protocol C. SLIP Serial Line Internet Protocol D. PLIP Parallel Line Internet Protocol
Last Answer : B. ARP Address Resolution Protocol
Description : IP is _________ datagram protocol. A) an unreliable B) a connectionless C) botha and b D) noneof the above
Last Answer : botha and b
Description : The IP packet that carries an IGMP packet has a value of _______ in its protocol field. A) 3 B) 2 C) 1 D) noneof the above
Last Answer : 2
Description : An ARP request is normally _______. A) broadcast B) multicast C) unicast D) noneof the above
Last Answer : broadcast
Description : An ARP reply isnormally_______. A) broadcast B) multicast C) unicast D) noneof the above
Last Answer : unicast
Description : A list of protocols used by a system, one protocol per layer, is called ________ a) protocol architecture b) protocol stack c) protocol suite d) protocol system
Last Answer : b) protocol stack
Description : HMP (Host Monitoring Protocol) is: A. a TCP/IP protocol used todynamically bind ahigh level IP Address to alow-level physical hardware address B. a TCP/IP high level protocol for transferring ... used to monitor computers D. a protocol that handles error andcontrol messages E. None of the above
Last Answer : a protocol used to monitor computers
Description : ICMP (Internet Control Message Protocol) is A. a TCP/IP protocol used todynamically bind ahigh level IP Address to alow-level physical hardware address B. a TCP/IP high level protocol for transferring ... to monitor computers D. a protocol that handles error andcontrol messages E. None of the above
Last Answer : a protocol that handles error andcontrol messages
Description : Which of the following TCP/IP protocol is used for transferring electronic mail messages from one machine to another? A. FTP B. SNMP C. SMTP D. RPC E. None of the above
Last Answer : SMTP
Description : Which of the following is not the layer of TCP/IP protocol? a. Application Layer b. Session Layer c. Transport Layer d. Internetwork layer
Last Answer : b. Session Layer
Description : The standard suit of protocols used by the Internet, Intranets, extranets and some other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor
Last Answer : A) TCP/IP
Description : The name of the protocol which provides virtual terminal in TCP/IP model is. A) Telnet B) SMTP C) HTTP
Last Answer : A) Telnet
Description : The ……… protocol is based on end-to- end delivery. a. SMTP b. TCP c. IP d. SCTP
Last Answer : a. SMTP
Description : A layer-4 firewall (a device that can look at all protocol headers up to the transport layer) CANNOT a. block entire HTTP traffic during 9:00PM and 5 :0OAM b. block all ICMP traffic c. stop ... address d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM
Last Answer : d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM
Description : .How many layers are present in the Internet protocol stack (TCP/IP model)? a. 5 b. 7 c. 6 d. 10
Last Answer : a. 5
Description : In the TCP/IP protocol architecture, the Network Access Layer includes ………………………………...layers of the OSI Reference Model. A. presentation, session, application B. physical, data link, network C. data link, network D. physical, data link
Last Answer : B. physical, data link, network
Description : ………………...is a minimal protocol that allows isolated hosts to link via TCP/IP over the telephone network and ………………..uses a proposed international standard for transmitting HDLC over asynchronous lines. A. LCP, PPP B. PPP, LCP C. SLIP, PPP D. PPP, SLIP
Last Answer : C. SLIP, PPP
Description : State weather the following statement is true or false for Point-to-Point Protocol 1). It is still in widespread use for dial-up TCP/IP connections 2) Point-to-point circuits in the form of asynchronous lines have long been ... . false C. 1. false, 2. false, 3. false D. 1. true, 2. false, 3. true
Last Answer : D. 1. true, 2. false, 3. true
Description : The _______ is a unidirectional protocol that has no flow or error control. A. Simplest B. Simplex C. TCP/IP protocol D. Simplest or Simplex
Last Answer : D. Simplest or Simplex
Description : State whether the following statements are true/false: 1) The standards of TCP/IP are published in a series of documents called NFC. 2) A Protocol is an agreement between the communicating parties on how communication is to proceed. a. 1.F,2.T b. 1.F, 2.F c. 1.T, 2.T d. 1.T, 2.F
Last Answer : a. 1.F,2.T
Description : Give function of the following TCP/IP protocols. i. ARP ii. FTP
Last Answer : i. ARP ARP:(Address resolution protocol) Networking H/W demands that a datagram contain the physical address of the intended recipient. If problem Address Resolution protocol (ARP) was developed. ARP ... . FTP uses port 21 for the control connection and port 20 for the data connection.
Description : Which is a link layer protocol? a) ARP b) TCP c) UDP d) HTTP
Last Answer : b) TCP
Description : Which protocol does hackers use to make their system seems as your system or another allowed host on your network? a. SNMP protocol b. TCP protocol c. ARP protocol d. ICMP protocol
Last Answer : c. ARP protocol
Description : A ________ is a 16-bit number used by the host-to-host protocol to identify to which higher- level protocol or application program (process) it must deliver incoming messages A. connection B. UDP C. port D. TCP
Last Answer : C. port
Description : Silly Window Syndrome is related to a. Error during transmission b. File transfer protocol c. Degrade in TCP performance d. Interface problem
Last Answer : c. Degrade in TCP performance
Description : State weather the following statement is true or false for Stream Control Transmission Protocol (SCTP). 1). SCTP uses only few known ports in the TCP space. 2).SCTP is a new transport protocol at the same layer as TCP and ... , 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true
Last Answer : D. 1.false, 2. true, 3. true