The ………………………. protocol was originally developed as a mechanism to enable diskless hosts to be remotely booted over a network as workstations. A. RARP B. ARP C. DHCP D. BOOTP

The ………………………. protocol was originally developed as a mechanism to enable diskless
hosts to be remotely booted over a network as workstations.
A. RARP
B. ARP
C. DHCP
D. BOOTP
by

1 Answer

Answer :

D. BOOTP
by

Related questions

……………………………. extends …………………………. to provide the full set of configuration parameters defined in the Requirements for Internet Hosts RFC. A. DHCP, BOOTP B. BOOTP, DHCP C. RARP, BOOTP D. DHCP, RARP

Description : ……………………………. extends …………………………. to provide the full set of configuration parameters defined in the Requirements for Internet Hosts RFC. A. DHCP, BOOTP B. BOOTP, DHCP C. RARP, BOOTP D. DHCP, RARP

Last Answer : A. DHCP, BOOTP

DHCP stands for……………………………….. A. Dynamic Host Control Protocol B. Diskless Hosts Control protocol C. Diskless Hosts Configuration protocol D. Dynamic Host configuration Protocol

Description : DHCP stands for……………………………….. A. Dynamic Host Control Protocol B. Diskless Hosts Control protocol C. Diskless Hosts Configuration protocol D. Dynamic Host configuration Protocol

Last Answer : D. Dynamic Host configuration Protocol

………………….. is responsible for converting the higher level protocol addresses (IP addresses) to physical network addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Description : ………………….. is responsible for converting the higher level protocol addresses (IP addresses) to physical network addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Last Answer : A) Address Resolution Protocol (ARP)

........ is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Description : ........ is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Last Answer : D) Internet Control Message Protocol (ICMP)

........... is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Description : ........... is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Last Answer : A) Address Resolution Protocol (ARP)

…………………………………. converts a physical network address into an IP address. A. ARP B. RARP C. DNS D. DHCP

Description : …………………………………. converts a physical network address into an IP address. A. ARP B. RARP C. DNS D. DHCP

Last Answer : B. RARP

Find out the components of DHCP: 1) A protocol that delivers host-specific configuration parameters from a server to a host. 2) The client determines its own hardware address; this is normally in a ROM on the hardware. 3) A mechanism for the allocation of temporary or permanent network addresses to hosts. A. 1,2 B. 1,3 C. 2,3 D. 1,2,3

Description : Find out the components of DHCP: 1) A protocol that delivers host-specific configuration parameters from a server to a host. 2) The client determines its own hardware address; this is normally in a ROM on the hardware. 3) ... or permanent network addresses to hosts. A. 1,2 B. 1,3 C. 2,3 D. 1,2,3

Last Answer : B. 1,3

The ________ protocol is the transmission mechanism used by the TCP/IP suite. A) ARP B) IP C) RARP D) noneof the above

Description : The ________ protocol is the transmission mechanism used by the TCP/IP suite. A) ARP B) IP C) RARP D) noneof the above

Last Answer : IP

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) Address Resolution Protocol (ARP) A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) ... C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

State weather the following statement is true or false for Internetwork layer. 1).Other internetwork-layer protocols are IP, ICMP, IGMP, ARP, and RARP. 2). Internet Protocol (IP) is the least important protocol in this layer 3). The internetwork layer, also called the internet layer or the network layer, provides the “virtual network” A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3.true C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false

Description : State weather the following statement is true or false for Internetwork layer. 1).Other internetwork-layer protocols are IP, ICMP, IGMP, ARP, and RARP. 2). Internet Protocol (IP) is the least important protocol in this layer ... 3.true C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false

Last Answer : B. 1. true, 2. false, 3.true

A _______is an ARP thatacts on behalf of a set of hosts. A) ARP B) RARP C) proxy ARP D) noneof the above

Description : A _______is an ARP thatacts on behalf of a set of hosts. A) ARP B) RARP C) proxy ARP D) noneof the above

Last Answer : proxy ARP

Which among the below mentioned protocols provides a mechanism of acquiring an IP address without manual intervention in addition to plug and play type of networking? a. BOOTP b. DHCP c. Both a & b d. None of the above

Description : Which among the below mentioned protocols provides a mechanism of acquiring an IP address without manual intervention in addition to plug and play type of networking? a. BOOTP b. DHCP c. Both a & b d. None of the above

Last Answer : b. DHCP

_______ isa dynamic mapping protocol in which a physical address is found for agiven logicaladdress. A) ARP B) RARP C) botha and b D) noneof the above

Description : _______ isa dynamic mapping protocol in which a physical address is found for agiven logicaladdress. A) ARP B) RARP C) botha and b D) noneof the above

Last Answer : ARP

The _______ is a dynamic mapping protocol in which a physical address is found for a given logical address. A. ARP B. RARP C. both a and b D. none of the above

Description : The _______ is a dynamic mapping protocol in which a physical address is found for a given logical address. A. ARP B. RARP C. both a and b D. none of the above

Last Answer : B. RARP

. A technique called______ isused tocreate a subnetting effect. A) ARP B) RARP C) proxy ARP D) noneof the above

Description : . A technique called______ isused tocreate a subnetting effect. A) ARP B) RARP C) proxy ARP D) noneof the above

Last Answer : proxy ARP

Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? a. ARQ (Automatic Repeat Request) b. ARP (Address Resolution Protocol) c. SLIP (Serial Line Internet Protocol) d. PLIP (Parallel Line Internet Protocol)

Description : Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? a. ARQ (Automatic Repeat Request) b. ARP (Address Resolution Protocol) c. SLIP (Serial Line Internet Protocol) d. PLIP (Parallel Line Internet Protocol)

Last Answer : b. ARP (Address Resolution Protocol)

Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? A. ARQ Automatic Repeat Request B. ARP Address Resolution Protocol C. SLIP Serial Line Internet Protocol D. PLIP Parallel Line Internet Protocol

Description : Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? A. ARQ Automatic Repeat Request B. ARP Address Resolution Protocol C. SLIP Serial Line Internet Protocol D. PLIP Parallel Line Internet Protocol

Last Answer : B. ARP Address Resolution Protocol

………………...is a minimal protocol that allows isolated hosts to link via TCP/IP over the telephone network and ………………..uses a proposed international standard for transmitting HDLC over asynchronous lines. A. LCP, PPP B. PPP, LCP C. SLIP, PPP D. PPP, SLIP

Description : ………………...is a minimal protocol that allows isolated hosts to link via TCP/IP over the telephone network and ………………..uses a proposed international standard for transmitting HDLC over asynchronous lines. A. LCP, PPP B. PPP, LCP C. SLIP, PPP D. PPP, SLIP

Last Answer : C. SLIP, PPP

Dynamic routing protocol enable routers to a. Dynamically discover and maintain routes b. Distribute routing updates to other routers c. Reach agreement with other routers about the network topology d. All of the above

Description : Dynamic routing protocol enable routers to a. Dynamically discover and maintain routes b. Distribute routing updates to other routers c. Reach agreement with other routers about the network topology d. All of the above

Last Answer : d. All of the above

There are two processes to pair MAC address with IP addresses. Which process finds an IP address from a MAC address? * RARP * ARP * RIP * IGRP

Description : There are two processes to pair MAC address with IP addresses. Which process finds an IP address from a MAC address? * RARP * ARP * RIP * IGRP

Last Answer : Correct answer: A ARP (Address Resolution Protocol) maps an IP address to the MAC address, RARP (Reverse Address Resolution Protocol) maps the MAC address to the IP address. ARP and RARP work at the internet layer of the Internet Model or the network layer of the OSI model.

Give the name of protocols used by different layers of TCP/IP. Discuss the function of ARP and RARP.

Description : Give the name of protocols used by different layers of TCP/IP. Discuss the function of ARP and RARP.

Last Answer : TCP/IP Model contains following layer. 1) Host-to-Network Layer - It defines characteristics of transmission media. It also concern with delivery of data when two systems are attached to same network ... such broadcasts are not forwarded by routers, so a RARP server is needed on each network. 

The address resolution protocol (ARP) is used for a. Finding the IP address from the DNS b. Finding the IP address of the default gateway c. Finding the IP address that corresponds to a MAC address d. Finding the MAC address that corresponds to an IP address

Description : The address resolution protocol (ARP) is used for a. Finding the IP address from the DNS b. Finding the IP address of the default gateway c. Finding the IP address that corresponds to a MAC address d. Finding the MAC address that corresponds to an IP address

Last Answer : Finding the MAC address that corresponds to an IP address

Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control)c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

Which protocol does HTTP (Hyper Text Transfer Protocol) - use for transferring web pages at the Transport layer a. IP b. UDP c. TCP d. ARP

Description : Which protocol does HTTP (Hyper Text Transfer Protocol) - use for transferring web pages at the Transport layer a. IP b. UDP c. TCP d. ARP

Last Answer : c. TCP

Which protocol does switch use at the layer 2 for finding MAC address? a. ICMP b. UDP c. ARP d. TCP

Description : Which protocol does switch use at the layer 2 for finding MAC address? a. ICMP b. UDP c. ARP d. TCP

Last Answer : c. ARP

The Internet Control Message Protocol (ICMP) A. allows gateways to send error acontrol messages toother gateways or hosts B. provides communication between the Internet Protocol Software on one machine and the InternetProtocol Software on another C. reports error conditions tothe original source, the source must relate errors to individual applicationprograms and takeaction to correct theproblem D. All of theabove E. None of the above

Description : The Internet Control Message Protocol (ICMP) A. allows gateways to send error acontrol messages toother gateways or hosts B. provides communication between the Internet Protocol Software on one machine ... and takeaction to correct theproblem D. All of theabove E. None of the above

Last Answer : All of theabove

A network consists of eight NT servers. You are planning to move servers to different segments of yournetwork, what utility should be used at eachserver to determine which server generates the most traffic? A. NBTSTAT B. NETSTAT.EXE C. Performance Monitor D. Network Monitor E. ARP.EXE

Description : A network consists of eight NT servers. You are planning to move servers to different segments of yournetwork, what utility should be used at eachserver to determine which server generates the most traffic? A. NBTSTAT B. NETSTAT.EXE C. Performance Monitor D. Network Monitor E. ARP.EXE

Last Answer : Network Monitor

Which protocol does hackers use to make their system seems as your system or another allowed host on your network? a. SNMP protocol b. TCP protocol c. ARP protocol d. ICMP protocol

Description : Which protocol does hackers use to make their system seems as your system or another allowed host on your network? a. SNMP protocol b. TCP protocol c. ARP protocol d. ICMP protocol

Last Answer : c. ARP protocol

Most of the inexpensive personal computers do not have any disk or diskette drive. What is the name of such computes? a. Home computers b. Diskless computers c. Dedicated computers d. General purpose computers

Description : Most of the inexpensive personal computers do not have any disk or diskette drive. What is the name of such computes? a. Home computers b. Diskless computers c. Dedicated computers d. General purpose computers

Last Answer : Home computers

A one-to-all communication between one source and all hosts on a network is classified as a_______ communication. A) unicast B) multicast C) broadcast D) none of the above

Description : A one-to-all communication between one source and all hosts on a network is classified as a_______ communication. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : broadcast

You are working with a network thathas the network ID 192.168.10.0. What subnet should you use that supportsup to 25 hosts and a maximum number of subnets? A. 255.255.255.192 B. 255.255.255.224 C. 255.255.255.240 D. 255.255.255.248 E. 255.255.255.252

Description : You are working with a network thathas the network ID 192.168.10.0. What subnet should you use that supportsup to 25 hosts and a maximum number of subnets? A. 255.255.255.192 B. 255.255.255.224 C. 255.255.255.240 D. 255.255.255.248 E. 255.255.255.252

Last Answer : 255.255.255.224

Which of the following statement is true? I. An address with all bits 1 is interpreted as all networks or all hosts. II. The class A network 128.0.0.0 is defined as the loopback network. a. i only b. ii onlyc. Both A and B d. None of the above

Description : Which of the following statement is true? I. An address with all bits 1 is interpreted as all networks or all hosts. II. The class A network 128.0.0.0 is defined as the loopback network. a. i only b. ii only c. Both A and B d. None of the above

Last Answer : a. i only

A packet filtering firewall can a. deny certain users from accessing a service b. block worms and viruses from entering the network c. disallow some files from being accessed through FTP d. block some hosts from accessing the network

Description : A packet filtering firewall can a. deny certain users from accessing a service b. block worms and viruses from entering the network c. disallow some files from being accessed through FTP d. block some hosts from accessing the network

Last Answer : d. block some hosts from accessing the network

A central computer that holds collections of data and programs for many PCs, workstations, and other computers is a(n) – (A) supercomputer (B) minicomputer (C) laptop (D) server (E) None of these

Description : A central computer that holds collections of data and programs for many PCs, workstations, and other computers is a(n) – (A) supercomputer (B) minicomputer (C) laptop (D) server (E) None of these

Last Answer : serve

What is the name of the softwarepackage that allows peopleto sendelectronic mail along anetworkof computers and workstations? A. Memory residentpackage B. Project management package C. Data communication package D. Electronic mail package E. None of the above

Description : What is the name of the softwarepackage that allows peopleto sendelectronic mail along anetworkof computers and workstations? A. Memory residentpackage B. Project management package C. Data communication package D. Electronic mail package E. None of the above

Last Answer : Data communication package

You have just installed a new network card on RHEL 5 server. When the server is booted up, it does not appear to recognize the new card. What steps do you take to diagnose and correct the issue?

Description : You have just installed a new network card on RHEL 5 server. When the server is booted up, it does not appear to recognize the new card. What steps do you take to diagnose and correct the issue?

Last Answer : Typically this is a driver issue. Check first that the card is visible on the PCI bus with lspci . Check to see if necessary kernel modules are loaded (with lsmod ). If they are not, ... module from HW vendor keep asking to see if the candidate is familiar with the tainted kernel concept.

Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : B) Static allocation

Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : B) Static allocation

Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : A) Automatic allocation

Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : B) Static allocation

What cangreatly reduce TCP/IP configuration problems? A. WINS Server B. WINS Proxy C. DHCP Server D. PDC E. None of the above

Description : What cangreatly reduce TCP/IP configuration problems? A. WINS Server B. WINS Proxy C. DHCP Server D. PDC E. None of the above

Last Answer : DHCP Server

Discuss DHCP in detail.

Description : Discuss DHCP in detail.

Last Answer : Dynamic Host Configuration Protocol. A protocol used by a host, as it boots, to learn various network information, such as its IP address. - relies on the existence of a DHCP ... receives a broadcast DHCPDISCOVER message from a host - sends a unicast DHCPDISCOVER message to the DHCP server

DHCP stands for: a) Defferred Host Comparable Protocol b) Diode Host Counter Protocol c) Dynamic Host Configuration Protocol d) None of These

Description : DHCP stands for: a) Defferred Host Comparable Protocol b) Diode Host Counter Protocol c) Dynamic Host Configuration Protocol d) None of These

Last Answer : c) Dynamic Host Configuration Protocol

Which one of the following protocol is not used in internet?  HTTP  DHCP  DNS  None of the Above

Description : Which one of the following protocol is not used in internet?  HTTP  DHCP  DNS  None of the Above

Last Answer :  None of the Above

An ARP request is normally _______. A) broadcast B) multicast C) unicast D) noneof the above

Description : An ARP request is normally _______. A) broadcast B) multicast C) unicast D) noneof the above

Last Answer : broadcast

An ARP reply isnormally_______. A) broadcast B) multicast C) unicast D) noneof the above

Description : An ARP reply isnormally_______. A) broadcast B) multicast C) unicast D) noneof the above

Last Answer : unicast

The target hardware address on an Ethernet is _______ in an ARP request. A) 0x000000000000 B) 0.0.0.0 C) variable D) class dependent

Description : The target hardware address on an Ethernet is _______ in an ARP request. A) 0x000000000000 B) 0.0.0.0 C) variable D) class dependent

Last Answer : 0x000000000000