........... is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

........... is responsible for converting the higher level protocol addresses to physical Network
Addresses.
A) Address Resolution Protocol (ARP)
B) Reverse Address Resolution Protocol (RARP)
C) Bootstrap Protocol (BOOTP)
D) Internet Control Message Protocol (ICMP)
by

1 Answer

Answer :

A) Address Resolution Protocol (ARP)
by

Related questions

………………….. is responsible for converting the higher level protocol addresses (IP addresses) to physical network addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Description : ………………….. is responsible for converting the higher level protocol addresses (IP addresses) to physical network addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Last Answer : A) Address Resolution Protocol (ARP)

........ is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Description : ........ is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Last Answer : D) Internet Control Message Protocol (ICMP)

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) Address Resolution Protocol (ARP) A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) ... C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

State weather the following statement is true or false for Internetwork layer. 1).Other internetwork-layer protocols are IP, ICMP, IGMP, ARP, and RARP. 2). Internet Protocol (IP) is the least important protocol in this layer 3). The internetwork layer, also called the internet layer or the network layer, provides the “virtual network” A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3.true C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false

Description : State weather the following statement is true or false for Internetwork layer. 1).Other internetwork-layer protocols are IP, ICMP, IGMP, ARP, and RARP. 2). Internet Protocol (IP) is the least important protocol in this layer ... 3.true C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false

Last Answer : B. 1. true, 2. false, 3.true

The ………………………. protocol was originally developed as a mechanism to enable diskless hosts to be remotely booted over a network as workstations. A. RARP B. ARP C. DHCP D. BOOTP

Description : The ………………………. protocol was originally developed as a mechanism to enable diskless hosts to be remotely booted over a network as workstations. A. RARP B. ARP C. DHCP D. BOOTP

Last Answer : D. BOOTP

Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? a. ARQ (Automatic Repeat Request) b. ARP (Address Resolution Protocol) c. SLIP (Serial Line Internet Protocol) d. PLIP (Parallel Line Internet Protocol)

Description : Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? a. ARQ (Automatic Repeat Request) b. ARP (Address Resolution Protocol) c. SLIP (Serial Line Internet Protocol) d. PLIP (Parallel Line Internet Protocol)

Last Answer : b. ARP (Address Resolution Protocol)

Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? A. ARQ Automatic Repeat Request B. ARP Address Resolution Protocol C. SLIP Serial Line Internet Protocol D. PLIP Parallel Line Internet Protocol

Description : Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? A. ARQ Automatic Repeat Request B. ARP Address Resolution Protocol C. SLIP Serial Line Internet Protocol D. PLIP Parallel Line Internet Protocol

Last Answer : B. ARP Address Resolution Protocol

Give the name of protocols used by different layers of TCP/IP. Discuss the function of ARP and RARP.

Description : Give the name of protocols used by different layers of TCP/IP. Discuss the function of ARP and RARP.

Last Answer : TCP/IP Model contains following layer. 1) Host-to-Network Layer - It defines characteristics of transmission media. It also concern with delivery of data when two systems are attached to same network ... such broadcasts are not forwarded by routers, so a RARP server is needed on each network. 

In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, ... iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

ICMP (Internet Control Message Protocol) is A. a TCP/IP protocol used todynamically bind ahigh level IP Address to alow-level physical hardware address B. a TCP/IP high level protocol for transferring filesfrom one machine to another C. a protocol used to monitor computersD.a protocol that handles error andcontrol messagesE.None of the above

Description : ICMP (Internet Control Message Protocol) is A. a TCP/IP protocol used todynamically bind ahigh level IP Address to alow-level physical hardware address B. a TCP/IP high level protocol for transferring ... to monitor computers D. a protocol that handles error andcontrol messages E. None of the above

Last Answer : a protocol that handles error andcontrol messages

_______ isa dynamic mapping protocol in which a physical address is found for agiven logicaladdress. A) ARP B) RARP C) botha and b D) noneof the above

Description : _______ isa dynamic mapping protocol in which a physical address is found for agiven logicaladdress. A) ARP B) RARP C) botha and b D) noneof the above

Last Answer : ARP

The _______ is a dynamic mapping protocol in which a physical address is found for a given logical address. A. ARP B. RARP C. both a and b D. none of the above

Description : The _______ is a dynamic mapping protocol in which a physical address is found for a given logical address. A. ARP B. RARP C. both a and b D. none of the above

Last Answer : B. RARP

There are two processes to pair MAC address with IP addresses. Which process finds an IP address from a MAC address? * RARP * ARP * RIP * IGRP

Description : There are two processes to pair MAC address with IP addresses. Which process finds an IP address from a MAC address? * RARP * ARP * RIP * IGRP

Last Answer : Correct answer: A ARP (Address Resolution Protocol) maps an IP address to the MAC address, RARP (Reverse Address Resolution Protocol) maps the MAC address to the IP address. ARP and RARP work at the internet layer of the Internet Model or the network layer of the OSI model.

…………………………………. converts a physical network address into an IP address. A. ARP B. RARP C. DNS D. DHCP

Description : …………………………………. converts a physical network address into an IP address. A. ARP B. RARP C. DNS D. DHCP

Last Answer : B. RARP

Which protocol does hackers use to make their system seems as your system or another allowed host on your network? a. SNMP protocol b. TCP protocol c. ARP protocol d. ICMP protocol

Description : Which protocol does hackers use to make their system seems as your system or another allowed host on your network? a. SNMP protocol b. TCP protocol c. ARP protocol d. ICMP protocol

Last Answer : c. ARP protocol

Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control)c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

Which protocol does switch use at the layer 2 for finding MAC address? a. ICMP b. UDP c. ARP d. TCP

Description : Which protocol does switch use at the layer 2 for finding MAC address? a. ICMP b. UDP c. ARP d. TCP

Last Answer : c. ARP

The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) ... v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : B) i, iii, iv and v only

State whether true or false. i) A connection oriented protocol can only use unicast addresses. ii) The any cast service is included in IPV6. A) True, False B) True, True C) False, True D) False, False

Description : State whether true or false. i) A connection oriented protocol can only use unicast addresses. ii) The any cast service is included in IPV6. A) True, False B) True, True C) False, True D) False, False

Last Answer : B) True, True

In which OSI layers does the FDDI protocol operate? A) Physical B) Data link C) Network D) A and B

Description : In which OSI layers does the FDDI protocol operate? A) Physical B) Data link C) Network D) A and B

Last Answer : D) A and B

The ________ protocol is the transmission mechanism used by the TCP/IP suite. A) ARP B) IP C) RARP D) noneof the above

Description : The ________ protocol is the transmission mechanism used by the TCP/IP suite. A) ARP B) IP C) RARP D) noneof the above

Last Answer : IP

What are the common protocols associated with the network layer? a. Address Resolution Protocol b. Reverse Address Resolution Protocol c. Internet protocol d. Neighbour Discovery Protocol

Description : What are the common protocols associated with the network layer? a. Address Resolution Protocol b. Reverse Address Resolution Protocol c. Internet protocol d. Neighbour Discovery Protocol

Last Answer : c. Internet protocol

……………………………. extends …………………………. to provide the full set of configuration parameters defined in the Requirements for Internet Hosts RFC. A. DHCP, BOOTP B. BOOTP, DHCP C. RARP, BOOTP D. DHCP, RARP

Description : ……………………………. extends …………………………. to provide the full set of configuration parameters defined in the Requirements for Internet Hosts RFC. A. DHCP, BOOTP B. BOOTP, DHCP C. RARP, BOOTP D. DHCP, RARP

Last Answer : A. DHCP, BOOTP

7.How does traceroute work? A. It uses an ICMP destination-unreachable message to elicit the name of a router. B. It sends a specially crafted IP packet to a router to locate the number of hops from the sender to the destination network. C. It uses a protocol that will be rejected by the gateway to determine the location. D. It uses the TTL value in an ICMP message to determine the number of hops from the sender to the router.

Description : 7.How does traceroute work? A. It uses an ICMP destination-unreachable message to elicit the name of a router. B. It sends a specially crafted IP packet to a router to locate the number of hops from ... the TTL value in an ICMP message to determine the number of hops from the sender to the router.

Last Answer : D. It uses the TTL value in an ICMP message to determine the number of hops from the sender to the router.

The Internet Control Message Protocol (ICMP) A. allows gateways to send error acontrol messages toother gateways or hosts B. provides communication between the Internet Protocol Software on one machine and the InternetProtocol Software on another C. reports error conditions tothe original source, the source must relate errors to individual applicationprograms and takeaction to correct theproblem D. All of theabove E. None of the above

Description : The Internet Control Message Protocol (ICMP) A. allows gateways to send error acontrol messages toother gateways or hosts B. provides communication between the Internet Protocol Software on one machine ... and takeaction to correct theproblem D. All of theabove E. None of the above

Last Answer : All of theabove

ICMP stands for __________ a. Internet Coordinate Message Protocol b. Internet Control Message Protocol c. Interconnect Control Message Protocol d. Interconnect Coordinate Message Protocol

Description : ICMP stands for __________ a. Internet Coordinate Message Protocol b. Internet Control Message Protocol c. Interconnect Control Message Protocol d. Interconnect Coordinate Message Protocol

Last Answer : b. Internet Control Message Protocol

.................... is used to carry traffic of one protocol over network that does not support that protocol directly. A) Tunneling

Description : .................... is used to carry traffic of one protocol over network that does not support that protocol directly. A) Tunneling

Last Answer : A) Tunneling

The address resolution protocol (ARP) is used for a. Finding the IP address from the DNS b. Finding the IP address of the default gateway c. Finding the IP address that corresponds to a MAC address d. Finding the MAC address that corresponds to an IP address

Description : The address resolution protocol (ARP) is used for a. Finding the IP address from the DNS b. Finding the IP address of the default gateway c. Finding the IP address that corresponds to a MAC address d. Finding the MAC address that corresponds to an IP address

Last Answer : Finding the MAC address that corresponds to an IP address

The standard suit of protocols used by the Internet, Intranets, extranets andsome other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor

Description : The standard suit of protocols used by the Internet, Intranets, extranets andsome other networks. A) TCP/IP B) Protocol C) Open system D) Internet work processor

Last Answer : A) TCP/IP

The............................. Is a collection of protocols designed by Internet Engineering TaskForce(IETF) to provide security for a packet at the Network level. A) IPsec B) Netsec C) Packetsec D) Protocolsec

Description : The............................. Is a collection of protocols designed by Internet Engineering TaskForce(IETF) to provide security for a packet at the Network level. A) IPsec B) Netsec C) Packetsec D) Protocolsec

Last Answer : A) IPsec

The combination of ........... and ............. is often termed the local address or the local portion of the IP Address. A) Network number and host number B) Network number and subnet number C) Subnet number and host number. D) All of the above

Description : The combination of ........... and ............. is often termed the local address or the local portion of the IP Address. A) Network number and host number B) Network number and subnet number C) Subnet number and host number. D) All of the above

Last Answer : C) Subnet number and host number.

Which of the following statement is true? i) An address with all bits 1 is interpreted as all networks or allhosts. ii) The class A network 128.0.0.0 is defined as the loopbacknetwork. A) i only B) ii only C) Both A and B D) None of the above

Description : Which of the following statement is true? i) An address with all bits 1 is interpreted as all networks or allhosts. ii) The class A network 128.0.0.0 is defined as the loopbacknetwork. A) i only B) ii only C) Both A and B D) None of the above

Last Answer : A) i only

2.address use 7 bits for the <network> and 24 bits for the <host> portion of the IP address. A) Class A B) Class B C) Class C D) Class D

Description : 2.address use 7 bits for the and 24 bits for the portion of the IP address. A) Class A B) Class B C) Class C D) Class D

Last Answer : A) Class A

State the following statement is true or false. i) In class B addresses a total of more than 1 billion addresses can be formed. ii) Class E addresses are reserved for future or experimental use. A) True, False B) True, True C) False, True D) False, False

Description : State the following statement is true or false. i) In class B addresses a total of more than 1 billion addresses can be formed. ii) Class E addresses are reserved for future or experimental use. A) True, False B) True, True C) False, True D) False, False

Last Answer : B) True, True

addresses are reserved for multicasting. A) Class B B) Class C C) Class D D) Class E

Description : addresses are reserved for multicasting. A) Class B B) Class C C) Class D D) Class E

Last Answer : D) Class E

A ..................is an extension of an enterprise’s private intranet across a public Network such as the Internet across a public Network such as the Internet, creating a secure private connection. A) VNP B) VPN C) VSN D) VSPN

Description : A ..................is an extension of an enterprise’s private intranet across a public Network such as the Internet across a public Network such as the Internet, creating a secure private connection. A) VNP B) VPN C) VSN D) VSPN

Last Answer : B) VPN

Regional Internet Registers (RIR) of the following? A) American Registry for Internet Numbers (ARIN) B) Europeans Registry for Internet Numbers (ERIN) C) Reseaux IP Europeans (RIPE) D) Asia Pacific Network Information Centre (APNIC)

Description : Which is not the Regional Internet Registers (RIR) of the following? A) American Registry for Internet Numbers (ARIN) B) Europeans Registry for Which is not the Internet Numbers (ERIN) C) Reseaux IP Europeans (RIPE) D) Asia Pacific Network Information Centre (APNIC)

Last Answer : C) i-c, ii-a, iii-d, iv-b

Which is not the Regional Internet Registers (RIR) of the following? A) American Registry for Internet Numbers (ARIN) B) Europeans Registry for Internet Numbers (ERIN) C) Reseaux IP Europeans (RIPE) D) Asia Pacific Network Information Centre (APNIC)

Description : Which is not the Regional Internet Registers (RIR) of the following? A) American Registry for Internet Numbers (ARIN) B) Europeans Registry for Internet Numbers (ERIN) C) Reseaux IP Europeans (RIPE) D) Asia Pacific Network Information Centre (APNIC)

Last Answer : Europeans Registry for Internet Numbers (ERIN)

On the upper layer of SSL, a protocol for initial authentication and transfer of encryption keys, called the ………………… A) SSL handshake protocol B) SSL authentication protocol

Description : On the upper layer of SSL, a protocol for initial authentication and transfer of encryption keys, called the ………………… A) SSL handshake protocol B) SSL authentication protocol

Last Answer : A) SSL handshake protocol

At the lower layer of SSL, a protocol for transferring data using a variety of predefined cipher and authentication combinations called the ………………. A) SSL handshake protocol B) SSL authentication protocol C) SSL record protocol D) SSL cipher protocol

Description : At the lower layer of SSL, a protocol for transferring data using a variety of predefined cipher and authentication combinations called the ………………. A) SSL handshake protocol B) SSL authentication protocol C) SSL record protocol D) SSL cipher protocol

Last Answer : C) SSL record protocol

The primary goal of the......................protocol is to provide a private channel between communicating application, which ensures privacy of data authentication of the partners, and integrity. A) SSL B) ESP C) TSL D) PSL

Description : The primary goal of the......................protocol is to provide a private channel between communicating application, which ensures privacy of data authentication of the partners, and integrity. A) SSL B) ESP C) TSL D) PSL

Last Answer : A) SSL

The examples of Interior Gateway Protocols (IGP) are. i) Open Short Path First (OSPF) ii) Routing Information Protocol (RIP) iii) Border Gateway Protocol (BGP) A) i only B) i, and ii only C) i and iii only D) All i, ii and iii

Description : The examples of Interior Gateway Protocols (IGP) are. i) Open Short Path First (OSPF) ii) Routing Information Protocol (RIP) iii) Border Gateway Protocol (BGP) A) i only B) i, and ii only C) i and iii only D) All i, ii and iii

Last Answer : B) i, and ii only

Which of the following is not the layer of TCP/IP protocol? A) Application Layer B) Session Layer C) Transport Layer D) Internetwork layer

Description : Which of the following is not the layer of TCP/IP protocol? A) Application Layer B) Session Layer C) Transport Layer D) Internetwork layer

Last Answer : B) Session Layer

The name of the protocol which provides virtual terminal in TCP/IP model is. A) Telnet B) SMTP C) HTTP

Description : The name of the protocol which provides virtual terminal in TCP/IP model is. A) Telnet B) SMTP C) HTTP

Last Answer : A) Telnet

Define Protocol and Encapsulation.

Description : Define Protocol and Encapsulation.

Last Answer : i. Protocol: Protocol is defines as the set of rules and regulations to communicate between layers in networking. OR It is set of rules and conventions sender and receiver in data communication ... of encapsulation. OR Encapsulation is the process of adding the headers and footers to the data.

Explain connectionless and connection oriented protocol. Give the example for each type.

Description : Explain connectionless and connection oriented protocol. Give the example for each type.

Last Answer : Connection less protocol: These protocols do not establish a connection between devices. It is manually achieved by transmitting information in one direction, from source to destination without checking to ... SMTP establish a TCP connection between Sender And port number 25 of receiver

Define protocol. Give the name of any two protocols.

Description : Define protocol. Give the name of any two protocols.

Last Answer : Define protocol: There are certain rules that must be followed to ensure proper communication & a set of such rules is known as protocol. Example: UDP, TCP/IP, SMTP, HTTP, SSL, FTP etc