Description : Find the resistivity of a material having resistance 20kohm, area 2 units and length of 12m. a) 6666.6 b) 3333.3 c) 1200 d) 2000
Last Answer : b) 3333.3
Description : The resistivity of a material with resistance 200 ohm, length 10m and area twice that of the length is a) 200 b) 300 c) 400 d) 500
Last Answer : c) 400
Description : A infinite resistance is considered as a/an a) Closed path(short circuit) b) Open path c) Not defined d) Ammeter with zero reading
Last Answer : b) Open path
Description : If Laplace equation satisfies, then which of the following statements will be true? a) Potential will be zero b) Current will be infinite c) Resistance will be infinite d) Voltage will be same
Last Answer : b) Current will be infinite
Description : In pure dielectrics, the parameter that is zero is a) Attenuation b) Propagation c) Conductivity d) Resistivity
Last Answer : c) Conductivity
Description : Zero permeability/permittivity implies which state? a) No ions are allowed in the medium b) No current is generated in the medium c) No magnetic or electric energy is permitted in the medium d) No resistivity
Last Answer : c) No magnetic or electric energy is permitted in the medium
Description : In free space, which of the following will be zero? a) Permittivity b) Permeability c) Conductivity d) Resistivity
Description : Calculate the conduction current density when the resistivity of a material with an electric field of 5 units is 4.5 units. a) 22.5 b) 4.5/5 c) 5/4.5 d) 9.5
Last Answer : c) 5/4.5
Description : Calculate the conduction density of a material with resistivity of 0.02 units and electric intensity of 12 units. a) 300 b) 600 c) 50 d) 120
Last Answer : b) 600
Description : Find the current density of a material with resistivity 20 units and electric field intensity 2000 units. a) 400 b) 300 c) 200 d) 100
Last Answer : d) 100
Description : Electric field intensity due to infinite sheet of charge σ is a) Zero b) Unity c) σ/ε d) σ/2ε
Last Answer : d) σ/2ε
Description : When curl of a path is zero, the field is said to be conservative. State True/False. a) True b) False
Last Answer : a) True
Description : A field has zero divergence and it has curls. The field is said to be a) Divergent, rotational b) Solenoidal, rotational c) Solenoidal, irrotational d) Divergent, irrotational
Last Answer : b) Solenoidal, rotational
Description : A vector is said to be solenoidal when its a) Divergence is zero b) Divergence is unity c) Curl is zero d) Curl is unity
Last Answer : a) Divergence is zero
Description : The magnetic field intensity of an infinite sheet of charge with charge density 36.5 units in air will be a) 18.25 b) 11.25 c) 73 d) 1/36.5
Last Answer : a) 18.25
Description : Find the magnetic field intensity due to an infinite sheet of current 5A and charge density of 12j units in the positive y direction and the z component is below the sheet. a) 6 b) 0 c) -6 d) 60k
Last Answer : c) -6
Description : Find the magnetic field intensity due to an infinite sheet of current 5A and charge density of 12j units in the positive y direction and the z component is above the sheet. a) -6 b) 12k c) 60 d) 6
Last Answer : d) 6
Description : Which equation will hold good for a magnetic material? a) Line integral of H is zero b) Surface integral of H is zero c) Line integral of B is zero d) Surface integral of B is zero
Last Answer : d) Surface integral of B is zero
Description : When a material has zero permittivity, the maximum potential that it can possess is a) ∞ b) -∞ c) Unity d) Zero
Last Answer : d) Zero
Description : The effective skin resistance of a material with conductivity 120 and skin depth of 2μm is a) 4.16 kilo ohm b) 4.16 mega ohm c) 41.6 kilo ohm d) 41.6 mega ohm
Last Answer : a) 4.16 kilo ohm
Description : The resistance in a magnetic material is called as a) Capacitance b) Inductance c) Reluctance d) Magnetic resistance
Last Answer : c) Reluctance
Description : The resistance of a material with conductivity 2millimho/m 2 , length 10m and area 50m is a) 500 b) 200 c) 100 d) 1000
Last Answer : c) 100
Description : A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero
Last Answer : a. remains the same
Description : What is specific resistance or resistivity of the material?
Last Answer : Specific resistance of the material is the resistance of a piece of unit length and unit cross-section (unit cube of that material). That is the resistance between the opposite faces of unit cube of the material. ... face of that material. The unit of specific resistance is Ω/cm3 , Ω/inch3 , Ω/m3 .
Description : Define – resistance and resistivity. State relationship between them. Give one material having high resistivity.
Last Answer : Ans: Resistance and Resistivity: Resistance: It is the opposition offered by the conductor to the flow of current. Resistivity: It is property of the substance by virtue of which it opposes to ... high resistivity: Mica, Nichrom, Rubber, Glass, Plastic Porcelain, Dry wood, Insulating material etc.
Description : An open coil in a transformer will be indicated by which of the listed conditions? A. 'zero' resistance accompanied by high inductance B. no resistance accompanied by stray inductance C. infinite resistance in addition to no inductance D. infinite resistance in addition to normal inductance
Last Answer : Answer: C
Description : With both ends of a three conductor cable disconnected and arranged without the conductors touching each other, an ohmmeter reading of 'zero' ohms between the ends of one conductor would indicate _____________. A. continuity B. a partial ground C. the resistance is infinite D. a short circuit
Last Answer : Answer: A
Description : Why the input resistance of an ideal OPAMP is infinite and output resistance is zero? secondly, how can we measure these resistances(input and output) in case of an ideal OPAMPand Real OP-AMP in the following conditions when 1- load is not connected. 2- load is connected.
Last Answer : Ans- Ideal OP-AMP is a power ful concept. If one goes through the history of amplifying devices it becomes clear that less it loads the previous stage better the output signal. ie ... . Can refer application notes by device manufacturer available in internet for more precise and practical solutions.
Description : Terminal potential difference of a battery is greater than its emf when a. the internal resistance of battery is infinite b. the internal resistance of battery is zero c. the battery is charged d. the battery is discharged
Last Answer : c. the battery is charged
Description : The resistance of a conductor at absolute zero (OK) is a. zero almost b. infinite almost c. May increase or decrease d. None
Last Answer : zero almost
Description : Resistance of an ideal insulator is a. Infinite b. Zero c. Finite d. depends upon nature
Last Answer : a. Infinite
Description : Resistance of a super conductor is a. Finite b. Infinite c. Zero d. changes with every conductor
Last Answer : c. Zero
Description : 57 In a transformer the resistance between its primary and secondary is A. Zero B. 1Ω C. 1000 Ω D. Infinite
Last Answer : D. Infinite
Description : A wire having very high value of conductance is said to be a. very good conductor b. moderately good conductor c. an insulator d. None
Last Answer : a. very good conductor
Description : A coil is said to be loosely coupled with which of the following conditions? a) K>1 b) K0.5 d) K
Last Answer : d) K
Description : The lines of force are said to be a) Real b) Imaginary c) Drawn to trace the direction d) Not significant
Last Answer : c) Drawn to trace the direction
Description : When a potential satisfies Laplace equation, then it is said to be a) Solenoidal b) Divergent c) Lamellar d) Harmonic
Last Answer : d) Harmonic
Description : If a function is said to be harmonic, then a) Curl(Grad V) = 0 b) Div(Curl V) = 0 c) Div(Grad V) = 0 d) Grad(Curl V) = 0
Last Answer : c) Div(Grad V) = 0
Description : The mathematical perception of the gradient is said to be a) Tangent b) Chord c) Slope d) Arc
Last Answer : c) Slope
Description : A charge located at point p (5,300,2) is said to be in which coordinate system? a) Cartesian system b) Cylindrical system c) Spherical system d) Space system
Last Answer : b) Cylindrical system
Description : The magnetic field intensity is said to be a) Divergent b) Curl free c) Solenoidal d) Rotational
Last Answer : c) Solenoidal
Description : Justify electromagnetic wave is said to be transverse wave.
Last Answer : Transverse electromagnetic wave:- The electromagnetic waves are oscillations which propagate through free space. In electromagnetic waves the direction of electric field, magnetic field & propagation are ... electric field vector with respect to the surface (i.e. looking at the horizon)
Description : For a non-zero Ex component and zero Ey component, the polarisation is a) Parallel b) Perpendicular c) Elliptical d) Circular
Last Answer : a) Parallel
Description : The attenuation in a good dielectric will be non- zero. State True/False. a) True b) False
Description : The loss tangent of a perfect dielectric will be a) Zero b) Unity c) Maximum d) Minimum
Last Answer : d) Minimum
Description : For conductors, the loss tangent will be a) Zero b) Unity c) Maximum d) Minimum
Last Answer : c) Maximum
Description : The conductivity in free space medium is a) Infinity b) Unity c) Zero d) Negative
Last Answer : c) Zero
Description : For a perfect dielectric, which parameter will be zero? a) Conductivity b) Frequency c) Permittivity d) Permeability
Last Answer : a) Conductivity
Description : The surface integral of which parameter is zero? a) E b) D c) B d) H
Last Answer : c) B
Description : The line integral of which parameter is zero for static fields? a) E b) H c) D d) B
Last Answer : a) E