Description : Given that the reflection coefficient is 0.6. Find the SWR. a) 2 b) 4 c) 6 d) 8
Last Answer : b) 4
Description : Find the reflection coefficient of a wave with an incident electric field of 5 units and reflected electric field of 2 units. a) 2.5 b) 0.4 c) 0.8 d) 1.2
Last Answer : b) 0.4
Description : The angle of incidence of a wave of a wave with angle of transmission 45 degree and the refractive indices of the two media given by 2 and 1.3 is a) 41.68 b) 61.86 c) 12.23 d) 27.89
Last Answer : a) 41.68
Description : Calculate the transmission coefficient of a wave with a reflection coefficient of 0.6 a) 0.6 b) 1 c) 0 d) 0.4
Last Answer : d) 0.4
Description : The reflection coefficient in the wave propagation when it is transmitted with the Brewster angle is a) 0 b) 1 c) -1 d) Infinity
Last Answer : a) 0
Description : a) For a transmission line, Find SWR and reflection coefficient R if, i. There is no reflected voltage. ii. Reflected voltage and incident voltage is equal. iii. If reflected voltage=20V and incident voltage=10V. iv. If reflected voltage=10V and incident voltage =20V.
Last Answer : reflection coefficient R=Vr/Vi i. There is no reflected voltage. i.e,Vr=0 R=0 SWR= 1+R/1-R=1 ii. Reflected voltage and incident voltage is equal. Vr=Vi; R=1 SWR= 1+R/1-R=1+1/1-1=infinity iii. If reflected ... and incident voltage =20V. Vr=10 and Vi=20 R=10/20=0.5 SWR= 1+R/1-R=1+.5/1-.5=3
Description : For a transmission line, the incident voltage. Ei = 6V and Er =2V ,Calculate: (i) Reflection Coefficient (ii) SWR
Last Answer : Reflection Coefficient(K) = Er / Ei = 2V / 6V K = 0.333 SWR = 1+K / 1- K = 1+0.333 / 1-0.333 = 1.333 / 0.667 SWR= 1.998
Description : The current reflection coefficient of a line with voltage reflection coefficient of 0.65 is given by a) 0 b) 0.65 c) -0.65 d) 0.35
Last Answer : c) -0.65
Description : The minimum impedance of a 75 ohm transmission line with a SWR of 2.5 is a) 100 b) 50 c) 25 d) 30
Last Answer : d) 30
Description : The maximum impedance of a 50 ohm transmission line with SWR of 3 is a) 50/3 b) 3/50 c) 150 d) 450
Last Answer : c) 150
Description : The transmission coefficient of a wave with incident and transmitted electric field of 5 and 5 respectively is a) 0 b) 1 c) 10 d) 5
Last Answer : b) 1
Description : The transmission coefficient of a wave propagating in the Brewster angle is a) 0 b) 1 c) -1 d) Infinity
Description : The angle at which the wave must be transmitted in air media if the angle of reflection is 45 degree is a) 45 b) 30 c) 60 d) 90
Last Answer : a) 45
Description : A wave incident on a surface at an angle 60 degree is having field intensity of 6 units. The reflected wave is at an angle of 30 degree. Find the field intensity after reflection. a) 9.4 b) 8.4 c) 10.4 d) 7.4
Last Answer : c) 10.4
Description : The power in a electromagnetic wave with electric field and magnetic field intensities 12 and 8 respectively is a) 96 b) 12 c) 8 d) 48
Last Answer : d) 48
Description : The power of a wave in a cylindrical waveguide of radius 2m with electric field 12 units is a) 2.39 b) 3.92 c) 9.23 d) 9.32
Last Answer : a) 2.39
Description : Find the Lorentz force of a charge 2.5C having an electric field of 5 units and magnetic field of 7.25 units with a velocity 1.5m/s. a) 39.68 b) 68.39 c) 86.93 d) 93.68
Last Answer : a) 39.68
Description : The work done by a charge of 10μC with a potential 4.386 is (in μJ) a) 32.86 b) 43.86 c) 54.68 d) 65.68
Last Answer : b) 43.86
Description : The angular separation between the vectors A = 4i + 3j + 5k and B = i – 2j + 2k is (in degrees) a) 65.8 b) 66.8 c) 67.8 d) 68.8
Last Answer : c) 67.8
Description : Calculate the magnetic moment when a field of B= 51 units is subjected to a torque of 20 units. a) 0.39 b) 4.2 c) 2.55 d) 3.21
Last Answer : a) 0.39
Description : Find the electric flux density of a material whose charge density is given by 12 units in a volume region of 0.5 units. a) 12 b) 24 c) 6 d) 48
Last Answer : c) 6
Description : If D = 2xy i + 3yz j + 4xz k, how much flux passes through x = 3 plane for which - 1
Last Answer : c) 36
Description : A load of 200 ohm is used to match 300 ohm transmission line to achieve SWR=1. Find out the required characteristic impedance of a quarter of a quarter wave transformer connected directly to the load.
Last Answer : Solution :
Description : What will be the reflection coefficient of the wave of load connected to transmission line if surge impedance of the line is equal to load ? (a) Zero (b) Unity (c) Infinity (d) None of the above
Last Answer : (a) Zero
Description : For transmission line, the incident voltage Ei = 6V, and Er = 3V. Calculate: (1) Reflection coefficient (2) Standing wave ratio
Last Answer : (1)Reflection coefficient (2) Standing wave ratio (1)Reflection coefficient Reflection coefficient R=Er/Ei =3/6 R=0.5 (2) Standing wave ratio SWR=Ei+Er/Ei-Er =6+3/6-3 SWR =3
Description : If Voltage Standing Wave Ratio, (VSWR) of a wave is 2, its reflection coefficient will be _____.
Last Answer : If Voltage Standing Wave Ratio, (VSWR) of a wave is 2, its reflection coefficient will be 1/3.
Description : The coefficient of reflection for current wave is
Last Answer : The coefficient of reflection for current wave is 1 or -1
Last Answer : Whenever a wave is incident on a perfect conductor then the reflection coefficient is 0.
Description : Find the mobility of the electrons when the drift velocity is 23 units and the electric field is 11 units. a) 1.1 b) 2.2 c) 3.2 d) 0.9
Last Answer : b) 2.2
Description : Standing waves occurs due to a) Impedance match b) Impedance mismatch c) Reflection d) Transmission
Last Answer : b) Impedance mismatch
Description : The angle of incidence is equal to the angle of reflection for perfect reflection. State True/False. a) True b) False
Last Answer : a) True
Description : The critical angle is defined as the angle of incidence at which the total internal reflection starts to occur. State True/False. a) True b) False
Description : The Brewster angle is the angle of a) Incidence b) Reflection c) Refraction d) Transmission
Last Answer : a) Incidence
Description : For total internal reflection to occur, which condition must be satisfied? a) N1 = N2 b) N1 > N2 c) N1 < N2 d) N1 x N2=1
Last Answer : b) N1 > N2
Description : The total charge of a surface with densities 1,2,...,10 is a) 11 b) 33 c) 55 d) 77
Last Answer : c) 55
Description : Calculate the attenuation constant of a conductor of conductivity 200 units, frequency 1M radian/s in air. a) 11.2 b) 1.12 c) 56.23 d) 5.62
Last Answer : a) 11.2
Description : The critical angle for two media with permittivities of 16 and 9 respectively is a) 48.59 b) 54.34 c) 60 d) 45
Last Answer : a) 48.59
Description : A resistor value of colour code orange violet orange will be a) 37 kohm b) 37 Mohm c) 48 kohm d) 48 Mohm
Last Answer : a) 37 kohm
Description : Find the flux density at the boundary when the charge density is given by 24 units. a) 12 b) 24 c) 48 d) 96
Last Answer : b) 24
Description : Find the resistance of a cylinder of area 200 units and length 100m with conductivity of 12 units. a) 1/24 b) 1/48 c) 1/12 d) 1/96
Last Answer : a) 1/24
Description : Calculate the energy in an electric field with flux density 6 units and field intensity of 4 units. a) 12 b) 24 c) 36 d) 48
Last Answer : a) 12
Description : Find the work done moving a charge 2C having potential V = 24volts is a) 96 b) 24 c) 36 d) 48
Description : The total power of a wave with average power 15 units in a surface density of 0.5 units is a) 15 b) 30 c) 7.5 d) 0.75
Last Answer : c) 7.5
Description : The phase constant of a wave with wavelength 2 units is a) 6.28 b) 3.14 c) 0.5 d) 2
Last Answer : b) 3.14
Description : Calculate the wavelength of the wave with phase constant of 3.14 units. a) 1 b) 2 c) 0.5 d) 4
Last Answer : b) 2
Description : Calculate the velocity of a wave with frequency 2 x10 9 rad/s and phase constant of 4 x 10 8 units. a) 0.5 b) 5 c) 0.2 d) 2
Last Answer : b) 5
Description : Calculate the phase constant of a wave with frequency 12 rad/s and velocity 3×10 8 m/s(in 10 -8 order) a) 0.5 b) 72 c) 4 d) 3
Last Answer : c) 4
Description : According to ISI recommendations, the maximum depth of stress block for balanced section of a beam of effective depth d is (A) 0.43 d (B) 0.55 d (C) 0.68 d (D) 0.85 d
Last Answer : Answer: Option A
Description : The torque on a conductor with flux density 23 units, current 1.6A and area 6.75 units will be a) 248.4 b) 192.6 c) 175.4 d) 256.9
Last Answer : a) 248.4
Description : Find the turns in an solenoid of inductance 23.4mH , current 2A and area 15cm. a) 900 b) 400 c) 498 d) 658
Last Answer : c) 498