Standing waves occurs due to
a) Impedance match
b) Impedance mismatch
c) Reflection
d) Transmission

1 Answer

Answer :

b) Impedance mismatch

Related questions

Description : The presence of standing waves on a transmission line is the result of A. a high level of attenuation on the line. B. terminating the line by a resistive load equal in value to the surge impedance ... input power to below its critical level. D. an impedance mismatch between the load and the line.

Last Answer : D. an impedance mismatch between the load and the line.

Description : Find the standing wave ratio, when a load impedance of 250 ohm is connected to a 75 ohm line. a) 0.3 b) 75 c) 250 d) 3.33

Last Answer : d) 3.33

Description : What is the result of an impedance mismatch between a receiver or transmitter and its transmission line or antenna?

Last Answer : High vswr, which equates to poor reception or a loss of power output.

Description : The minimum impedance of a 75 ohm transmission line with a SWR of 2.5 is a) 100 b) 50 c) 25 d) 30

Last Answer : d) 30

Description : The maximum impedance of a 50 ohm transmission line with SWR of 3 is a) 50/3 b) 3/50 c) 150 d) 450

Last Answer : c) 150

Description : Calculate the transmission coefficient of a wave with a reflection coefficient of 0.6 a) 0.6 b) 1 c) 0 d) 0.4

Last Answer : d) 0.4

Description : The Brewster angle is the angle of a) Incidence b) Reflection c) Refraction d) Transmission

Last Answer : a) Incidence

Description : Draw waveform for standing waves on an open and shorted line. Prove that impedance is inverted at every quarter wavelength interval.

Last Answer : Waveform- Explanation When the transmission line is short circuited voltage is zero and current is maximum.The variation is according to the wavelength. When the ... The pattern repeats for every half wavelength. Thus impedance is inverted at every quarter wavelength interval.

Description : In some cases, it’s also hard to map an object to XML (e.g., an object graph with cyclic references) because there’s actually an impedance mismatch between an object model and an XML model. a) True b) False

Last Answer : True

Description : What is the result of an impedance mismatch in a waveguide?

Last Answer : Standing waves that cause power losses, a reduction in power handling capability, and an increase in frequency and sensitivity.

Description : Which of the following characterizes a properly terminated transmission line? A. The line loss is minimum. B. The standing wave ratio is minimum. C. The input impedance is twice the load impedance. D. The standing wave ratio is one.

Last Answer : D. The standing wave ratio is one.

Description : What will be the reflection coefficient of the wave of load connected to transmission line if surge impedance of the line is equal to load ? (a) Zero (b) Unity (c) Infinity (d) None of the above

Last Answer : (a) Zero

Description : A 50Ω transmission line is terminated in an impedance of 20-j50. What will be the reflection coefficient? A) 0.69 B) 1.69 C) 6.9 D) 16.9 

Last Answer : A 50Ω transmission line is terminated in an impedance of 20-j50. What will be the reflection coefficient? A) 0.69 B) 1.69 C) 6.9 D) 16.9 

Description : A transmission line is terminated at its characteristic impedance. The reflection coefficient is  (a) 1 (b) –1 (c) 0 (d) ∞

Last Answer : A transmission line is terminated at its characteristic impedance. The reflection coefficient is  0

Description : For transmission line, the incident voltage Ei = 6V, and Er = 3V. Calculate: (1) Reflection coefficient (2) Standing wave ratio

Last Answer : (1)Reflection coefficient  (2) Standing wave ratio (1)Reflection coefficient Reflection coefficient R=Er/Ei  =3/6  R=0.5 (2) Standing wave ratio SWR=Ei+Er/Ei-Er  =6+3/6-3  SWR =3

Description : The expression for intrinsic impedance is given by a) √(με) b) (με) c) √(μ/ε) d) (μ/ε)

Last Answer : c) √(μ/ε)

Description : The phase shift in the electric and magnetic fields in an EM wave is given by which parameter? a) phase constant b) attenuation constant c) propagation constant d) intrinsic impedance

Last Answer : d) intrinsic impedance

Description : The intrinsic impedance of free space is a) 489 b) 265 c) 192 d) 377

Last Answer : d) 377

Description : The intrinsic impedance is the ratio of square root of a) Permittivity to permeability b) Permeability to permittivity c) Phase constant to wavelength d) Wavelength to phase constant

Last Answer : b) Permeability to permittivity

Description : The intrinsic impedance of free space is given by a) 272 ohm b) 412 ohm c) 740 ohm d) 377 ohm

Last Answer : d) 377 ohm

Description : The standing wave ratio of short circuited and open circuited lines will be a) 0 b) 1 c) -1 d) ∞

Last Answer : d) ∞

Description : For matched line, the standing wave ratio will be a) 0 b) ∞ c) -1 d) 1

Last Answer : d) 1

Description : The range of the standing wave ratio is a) 0 < S < 1 b) -1 < S < 1 c) 1 < S < ∞ d) 0 < S < ∞

Last Answer : c) 1 < S < ∞

Description : The maxima and minima voltage of the standing wave are 6 and 2 respectively. The standing wave ratio is a) 2 b) 3 c) 1/2 d) 4

Last Answer : b) 3

Description : Standing wave ratio is defined as the a) Ratio of voltage maxima to voltage minima b) Ratio of current maxima to current minima c) Product of voltage maxima and voltage minima d) Product of current maxima and current minima

Last Answer : a) Ratio of voltage maxima to voltage minima

Description : A load of 200 ohm is used to match 300 ohm transmission line to achieve SWR=1. Find out the required characteristic impedance of a quarter of a quarter wave transformer connected directly to the load.

Last Answer : Solution :

Description : The current reflection coefficient of a line with voltage reflection coefficient of 0.65 is given by a) 0 b) 0.65 c) -0.65 d) 0.35

Last Answer : c) -0.65

Description : Find the reflection coefficient of the wave with SWR of 3.5. a) 0.55 b) 0.23 c) 0.48 d) 0.68

Last Answer : a) 0.55

Description : Given that the reflection coefficient is 0.6. Find the SWR. a) 2 b) 4 c) 6 d) 8

Last Answer : b) 4

Description : Find the reflection coefficient of a wave with an incident electric field of 5 units and reflected electric field of 2 units. a) 2.5 b) 0.4 c) 0.8 d) 1.2

Last Answer : b) 0.4

Description : The angle at which the wave must be transmitted in air media if the angle of reflection is 45 degree is a) 45 b) 30 c) 60 d) 90

Last Answer : a) 45

Description : The angle of incidence is equal to the angle of reflection for perfect reflection. State True/False. a) True b) False

Last Answer : a) True

Description : The critical angle is defined as the angle of incidence at which the total internal reflection starts to occur. State True/False. a) True b) False

Last Answer : a) True

Description : The reflection coefficient in the wave propagation when it is transmitted with the Brewster angle is a) 0 b) 1 c) -1 d) Infinity

Last Answer : a) 0

Description : For total internal reflection to occur, which condition must be satisfied? a) N1 = N2 b) N1 > N2 c) N1 < N2 d) N1 x N2=1

Last Answer : b) N1 > N2

Description : A wave incident on a surface at an angle 60 degree is having field intensity of 6 units. The reflected wave is at an angle of 30 degree. Find the field intensity after reflection. a) 9.4 b) 8.4 c) 10.4 d) 7.4

Last Answer : c) 10.4

Description : 1. Which nitrogen fixing bacteria is found in leguminuous plant? 2. A person to be qualified for standing in a panchayat election what age must have he attained? 3. Mirage is observed in ... coal reserves of India are found in which state? 20. Which Sultan provided employment to unemployeds?

Last Answer : Answer : 1. Rizobium 2. 21 years 3. Total reflection 4. Granite 5. Jahangir 6. Karnataka 7. Foreign Institutional Investors 8. Mycorrhizae 9. Barren Island 10. Aurobindo Ghosh 11. M. Hidayatullah 12. ... 16. New Delhi 17. Muscles ear lobe 18. Neelam Sanjiva Reddy 19. Jharkhand 20. Firoz shah Tughlaq

Description : The propagation of the electromagnetic waves can be illustrated by a) Faraday law b) Ampere law c) Flemming rule d) Coulomb law

Last Answer : c) Flemming rule

Description : Electromagnetic waves are longitudinal in nature. State True/False. a) True b) False

Last Answer : b) False

Description : For time varying currents, the field or waves will be a) Electrostatic b) Magneto static c) Electromagnetic d) Electrical

Last Answer : c) Electromagnetic

Description : In electromagnetic waves, the electric field will be perpendicular to which of the following? a) Magnetic field intensity b) Wave propagation c) Both H and wave direction d) It propagates independently

Last Answer : c) Both H and wave direction

Description : What is the frequency range of VHF electromagnetic waves? A) 30-300 kHz B) 30-3000 kHz C) 30-300 MHz D) 30-3000 MHz

Last Answer : What is the frequency range of VHF electromagnetic waves? A) 30-300 kHz B) 30-3000 kHz C) 30-300 MHz D) 30-3000 MHz

Description : The transmission coefficient of a wave with incident and transmitted electric field of 5 and 5 respectively is a) 0 b) 1 c) 10 d) 5

Last Answer : b) 1

Description : The angle of incidence of a wave of a wave with angle of transmission 45 degree and the refractive indices of the two media given by 2 and 1.3 is a) 41.68 b) 61.86 c) 12.23 d) 27.89

Last Answer : a) 41.68

Description : The transmission coefficient of a wave propagating in the Brewster angle is a) 0 b) 1 c) -1 d) Infinity

Last Answer : b) 1

Description : The work done in the power transmission with E and H given by 50 and 65 respectively. The velocity of propagation is 20m/s. a) 162.5 b) 621.5 c) 562.1 d) 261.5

Last Answer : a) 162.5

Description : The velocity of a wave travelling in the air medium without transmission lines or waveguides(wireless) is a) 6 x 10 8 b) 3 x 10 8 c) 1.5 x 10 8 d) 9 x 10 8

Last Answer : b) 3 x 10 8

Description : The benefit of Maxwell equation is that a) Any parameter can be calculated b) Antenna can be designed c) Polarisation of the wave can be calculated d) Transmission line constants can be found

Last Answer : a) Any parameter can be calculated

Description : Alternating current measured in a transmission line will be a) Peak value b) Average value c) RMS value d) Zero

Last Answer : c) RMS value

Description : A man is sitting by the side of a large lake. He hears the utterances of bathers with their mouth close to water surface more clearly than if they were at same distance away on land. This ... due to sound waves undergoing (a) Reflection (b) Refraction (c) Dispersion (d) Total internal reflection

Last Answer : Ans:(c)