Line overhead consists of ________bytes.
A)
1
B)
6
C)
9
D)
18

1 Answer

Answer :

18

Related questions

Description : The section overhead consists of ______octets. A) 1 B) 6 C) 9 D) 18

Last Answer : 9

Description : An IPv6address consistsof ________bytes (octets); A) 4 B) 8 C) 16 D) none of the above

Last Answer : 16

Description : The pathoverheadconsists of ______bytes. A) 1 B) 6 C) 9 D) 18

Last Answer : 9

Description : What is the number of read-write heads in the drive for a 9-trac magnetic tape? a. 9 b. 16 c. 18 d. 27

Last Answer : 27

Description : To completely write the program in FORTRAN and rewrite the 1% code in assembly language, if the project needs 13 days, theteam consists of ? 13 programmers 10 programmers 8 programmers 100/13 programmers

Last Answer : 10 programmers

Description : A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Last Answer : Eight bits

Description : The central processing unit (CPU) consists of a. Input, output and processing b. Control unit, primary storage, and secondary storage c. Control unit, arithmetic-logic unit and primary storage d. Control unit, processing, and primary storage

Last Answer : Control unit, arithmetic-logic unit and primary storage

Description : The storage subsystem in a microcomputer consists mainly of “ or “ media with varying capacities a. Memory or video b. Magnetic or optical c. Optical or memory d. Video or magnetic

Last Answer : Magnetic or optical

Description : A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Last Answer : Eight bits

Description : The central processing unit (CPU) consists of a. Input, output and processing b. Control unit, primary storage, and secondary storage c. Control unit, arithmetic-logic unit and primary storage d. Control unit, processing, and primary storage

Last Answer : Control unit, arithmetic-logic unit and primary storage

Description : The storage subsystem in a microcomputer consists mainly of “ or “ media with varying capacities a. Memory or video b. Magnetic or optical c. Optical or memory d. Video or magnetic

Last Answer : Magnetic or optical

Description : Instruction in computer languages consists of a. OPCODE b. OPERAND c. Both of above d. None of above

Last Answer : Both of above

Description : A Bluetooth network consists of _____primary device(s)and up to____ secondary devices. A) one; five B) five; three C) two; six D) one; seven

Last Answer : one; seven

Description : Which error detection method consists of just one redundant bit per data unit? A) Simple parity check B) Two-dimensionalparity check C) CRC D) Checksum

Last Answer : Simple parity check

Description : __________ consists of a central conductor and a shield. A) Coaxial B) Fiber-optic C) Twisted-pair D) none of the above

Last Answer : Coaxial

Description : ________cable consists of two insulated copper wires twistedtogether. A) Coaxial B) Fiber-optic C) Twisted-pair D) none of the above

Last Answer : Twisted-pair

Description : ______ cable consists of an inner copper core and asecond conductingouter sheath. A) Twisted-pair B) Coaxial C) Fiber-optic D) Shielded twisted-pair

Last Answer : Coaxial

Description : A network consists of eight NT servers. You are planning to move servers to different segments of yournetwork, what utility should be used at eachserver to determine which server generates the most traffic? A. NBTSTAT B. NETSTAT.EXE C. Performance Monitor D. Network Monitor E. ARP.EXE

Last Answer : Network Monitor

Description : A 4 byte IP address consists of __________ a. only network address b. only host address c. network address & host address d. network address & MAC address

Last Answer : c. network address & host address

Description : State weather the following statement is true or false for IPV6 Addressing 1). IPV6 is a routable protocol that addresses, routes, fragments, and reassembles packets 2).IPV6 is a connectionless, unreliable datagram protocol. 3). ... C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Last Answer : A. 1. True, 2. true, 3. true

Description : Distance Vector Routing is a……... routing algorithm, it consists of a data structure called a ……… A. Static , routing table B. Dynamic, look-up table C. Dynamic, routing table D. Static, look-up table

Last Answer : C. Dynamic, routing table

Description : In most Wide Area Networks, the subnet consists of two distinct components: which are they? A. Transmission Lines and Switching Elements. B. host and subnet C. Transmission Lines and host D. subnet and Switching Elements.

Last Answer : A. Transmission Lines and Switching Elements.

Description : The _______ is a server whose zone consists of the whole tree. A. domain server B. zone server C. root server D. none of the above

Last Answer : C. root server

Description : Consists of 2 conductors twisted round each other. a. Twisted pair cable b. Fiber optic cable c. Coaxial cable d. Microwave

Last Answer : a. Twisted pair cable

Description : According to the Fenske equation, what will be the minimum number of plates required in a distillation column to separate an equimolar binary mixture of components A and B into an overhead fraction containing 99 mol% A and a ... in the column. (A) 5 (B) 9 (C) 12 (D) 28

Last Answer : (C) 12

Description : The end points of a given line are (0, 0) and (6, 18). Compute each value of y as x steps from 0 to 3, by using equation of straight line : (A) For x=0, y=0; x=1, y=3; x=2, y=6; x=3, y=9 (B) For x=0, y=1; x=1, y=3; x=2, ... x=1, y=3; x=2, y=6; x=3, y=9 (D) For x=0, y=0; x=1, y=3; x=2, y=4; x=3, y=6

Last Answer : Answer: A

Description : What is the requirement of cross arm in overhead line ?

Last Answer : Cross arm steel is made of angle section or wood. Nut-bolts , clamps, etc. are firmly attached to the head of the pole. Cross arm s insulators and conductors carry the wire.

Description : For an overhead line, the surge impedance is taken as (a) 20-30 ohms (b) 70—80 ohms (c) 100—200 ohms (d) 500—1000 ohms (e) none of the above

Last Answer : (c) 100—200 ohms

Description : A single-line-to-ground fault on a overhead transmission line creates (A) voltage sag (B) voltage swell (C) over voltage (D) voltage flicker 

Last Answer : Creates  overvoltage.

Description : Effect of increase in temperature in an overhead transmission line is (a) to increase stress and length both (b) to decrease stress and length both (c) to decrease stress and increase length (d) None of the above 

Last Answer : D

Description : An overhead transmission line has a span of 260 m. The weight of the conductor is 0.68 kg/m. The maximum allowable tension in the line is 1550 kg. Maximum sag of the line should be (a) 5.8 m (b) 4.6 m (c) 2.7 m (d) 3.7 m 

Last Answer : Maximum sag = (l^2)/8c So c = T/W c = 1550/0.68 c= 2279.4 Now Maximum sag = (260^2)/8(2279.4) = 3.7 (d)

Description : Earth wire on EHV overhead transmission line is provided to protect the line against:

Last Answer : Earth wire on EHV overhead transmission line is provided to protect the line against: lightening surge

Description : lf a travelling-wave travelling along a loss-less overhead line does not result in any reflection after it has reached the far end, then the far end of the line is

Last Answer : lf a travelling-wave travelling along a loss-less overhead line does not result in any reflection after it has reached the far end, then the far end of the line is terminated into a resistance equal to surge impedance of the line

Description : Surge impedance of overhead transmission line is normally in the order of (a) 1- 5 ohms (c) 300 - 500 ohms (b) 20 - 30 ohms (d) 300000 - 500000 ohms

Last Answer : Surge impedance of overhead transmission line is normally in the order of 300 - 500 ohms

Description : A long overhead transmission line is terminated by its characteristic impedance. Under this operating condition, the ratio of the voltage to the current at different points along the line will?

Last Answer : A long overhead transmission line is terminated by its characteristic impedance. Under this operating condition, the ratio of the voltage to the current at different points along the line will progressively increase from the receiving end to the sending end.

Description : The time taken for a surge to travel a 600 km long overhead transmission line is?

Last Answer : The time taken for a surge to travel a 600 km long overhead transmission line is 0.002s.

Description : A voltage of 1000 kV is applied to an overhead line with its receiving end open. If the surge impedance of the line is 500 ohm, then the total surge power in the line ill

Last Answer : A voltage of 1000 kV is applied to an overhead line with its receiving end open. If the surge impedance of the line is 500 ohm, then the total surge power in the line ill 2000 MW .

Description : An overhead transmission line has a span of 240m between level supports. What is the maximum sag if the conductor weight 727 kg/km and has a breaking strength of 6880 kg? Allow the factor of safety of 2. Neglecting wind and ice loading.

Last Answer : An overhead transmission line has a span of 240m between level supports. 1.52 m is the maximum sag if the conductor weight 727 kg/km and has a breaking strength of 6880 kg? Allow the factor of safety of 2. Neglecting wind and ice loading.

Description : To increase the visual critical voltage of cporona for an overhead line, one solid phase-conductor is replaced by a "bundle" of four smaller conductors per phase, having an aggregate cross- ... solid conductor is 40 mm, then the radius of each of the bundle conductors would be?

Last Answer : To increase the visual critical voltage of cporona for an overhead line, one solid phase-conductor is replaced by a "bundle" of four smaller conductors per phase, having an aggregate cross- ... conductor is 40 mm, then the radius of each of the bundle conductors would be 30 mm.

Description : For a single phase overhead line having solid copper conductors of diameter 1 cm, spaced 60 cm between centers, the inductance in mH/km is?

Last Answer : For a single phase overhead line having solid copper conductors of diameter 1 cm, spaced 60 cm between centers, the inductance in mH/km is 0.05 + 0.2 ln (6010.5).

Description : The maximum throughput for pure ALOHA is________per cent. A) 12.2 B) 18.4 C) 36.8 D) none of the above

Last Answer : 18.4

Description : . What is the hexadecimal equivalentof the Ethernet address 01011010 0001000101010101 00011000 10101010 00001111? A) 5A:88:AA:18:55:F0 B) 5A:81:BA:81:AA:0F C) 5A:18:5A:18:55:0F D) 5A:11:55:18:AA:0F

Last Answer : 5A:11:55:18:AA:0F

Description : Based onthe Clos criteria, if N = 200, then the minimum number of crosspoints isgreater thanor equal to _______. A) 15,200 B) 18,000 C) 42,000 D) 20,000

Last Answer : 15,200

Description : In a block, the mask is 255.255.192.0; what is the prefix length? A) /20 B) /28 C) /18 D) none of the above

Last Answer : /18

Description : FTP server listens for connection on which port number? a) 18 b) 21 c) 22 d) 26

Last Answer : b) 21

Description : 3. Overhead projector is superior to short circuit TV in a classroom teaching because (a) It is cheap and self devised (6) Pictures in it may be shown in a desired sequence and with a minimum of lost motion (material) (c) Information presented though it is easily retained (d) it is easy to use

Last Answer : (c) Information presented though it is easily retained

Description : A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are :  (A) less than 66 kV (B) lie between 66 kV and 110 kV (C) more than 165 kV (D) lie between 110 kV and 165 kV

Last Answer : A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are : lie between 66 kV and 110 kV

Description : A committee is to be formed comprising 7 members such that there is a simple majority of men and at-least 1 woman. The shortlist consists of 9 men and 6 women. In how many ways can this committee be formed? a) 3724 b) 4914 c) 3928 d) 4913

Last Answer : b) 4914

Description : Consider a program that consists of 8 pages (from 0 to 7) and we have 4 page frames in the physical memory for the pages. The page reference string is :  1 2 3 2 5 6 3 4 6 3 7 3 1 5 3 6 3 4 2 4 3 4 5 ... to fill available page frames with pages): (A) 9 and 6 (B) 10 and 7 (C) 9 and 7 (D) 10 and 6

Last Answer : (B) 10 and 7

Description : System 1 : The first column of the RH array consists of the terms 6,3,9,-2, and 4. System 2 : The first column of the RH array consists of the terms 3,6,9,2, and -4. The number of unstable poles for system1, and system 2, are respectively, (A) 1,1 (B) none, none (C) 2,2 (D) 2,1

Last Answer : System 1 : The first column of the RH array consists of the terms 6,3,9,-2, and 4. System 2 : The first column of the RH array consists of the terms 3,6,9,2, and -4. The number of unstable poles for system1, and system 2, are respectively, (A) 1,1 (B) none, none (C) 2,2 (D) 2,1