Description : _______ is the protocol suite for thecurrent Internet. A) TCP/IP B) NCP C) UNIX D) ACM
Last Answer : TCP/IP
Description : Match the following IEEE No to their corresponding Name for IEEE 802 standards for LANs. i) 802.3 a) WiFi ii) 802.11 b) WiMa iii) 802.15.1 c) Ethernet iv) 802.16 d) Bluetooth a. i-b, ii-c, iii-d, iv-a b. i-c, ii-d, iii-a, iv-b c. i-c, ii-a, iii-d, iv-b d. i-b, ii-d, iii-c, iv-a
Last Answer : c. i-c, ii-a, iii-d, iv-b
Description : When the continuing auditor intends to use information about the entity and its environment obtained in prior periods, the auditor should a. Assess control risk as "high" for the assertions ... whether to equitably reduce the audit fee due to lower audit effort expended during the engagement
Last Answer : Determine whether changes have occurred that may affect the relevance of such information in the current audit.
Description : In Bluetooth, the_____ link is used when data integrity is more important than avoiding latency. A) SCO B) ACL C) ACO D) SCL
Last Answer : ACL
Description : In Bluetooth, the_____ link is used when avoiding latency (delay in data delivery) is more important than integrity (error-free delivery). A) SCO B) ACL C) ACO D) SCL
Last Answer : SCO
Description : Bluetooth uses ______method in thephysical layer to avoid interference from other devicesor othernetworks. A) DSSS B) FHSS C) FDMA D) none of the above
Last Answer : FHSS
Description : The access method in Bluetooth is________. A) FDMA B) TDD-TDMA C) CDMA D) none of the above
Last Answer : TDD-TDMA
Description : In Bluetooth, theL2CAP sublayer, is roughly equivalent to the LLC sublayer inLANs. A) radio B) baseband C) L2CAP D) none of the above
Last Answer : L2CAP
Description : In Bluetooth, the_____layer is roughlyequivalent tothe MAC sublayer in LANs. A) radio B) baseband C) L2CAP D) none of the above
Last Answer : baseband
Description : In Bluetooth, the_______ layer is roughly equivalent to thephysical layer of theInternet model. A) radio B) baseband C) L2CAP D) none of the above
Last Answer : radio
Description : A Bluetooth network consists of _____primary device(s)and up to____ secondary devices. A) one; five B) five; three C) two; six D) one; seven
Last Answer : one; seven
Description : In Bluetooth, multiple ________ form a network called a _________. A) scatternet; piconets B) piconets: scatternet C) piconets:bluenet D) bluenet; scatternet
Last Answer : piconets: scatternet
Description : A Bluetooth network is called a ________. A) piconet B) scatternet C) bluenet D) none of the above
Last Answer : piconet
Description : Bluetooth is a _______ technology that connects devices (called gadgets) ina small area. A) wired LAN B) wirelessLAN C) VLAN D) none of the above
Last Answer : wirelessLAN
Description : Bluetooth is an example of __________ a) personal area network b) local area network c) virtual private network d) wide area network
Last Answer : a) personal area network
Description : IEEE hasdefined the specifications fora wireless LAN, called _______, whichcovers the physical and data link layers. A) IEEE 802.3 B) IEEE 802.5 C) IEEE 802.11 D) IEEE 802.2
Last Answer : IEEE 802.11
Description : The original IEEE 802.11,has a data rate of _____Mbps. A) 1 B) 6 C) 11 D) 22
Last Answer : 1
Description : Match the following IEEE No to their corresponding Name for IEEE 802 standards for LANs. i) 802.3 a) WiFi ii) 802.11 b) WiMa iii) 802.15.1 c) Ethernet iv) 802.16 d) Bluetooth A) i-b, ii-c, iii-d, iv-a B) i-c, ii-d, iii-a, iv-b C) i-c, ii-a, iii-d, iv-b D) i-b, ii-d, iii-c, iv-a
Last Answer : C) i-c, ii-a, iii-d, iv-b
Description : To guarantee correction ofup to 5 errors in all cases, the minimum Hamming distance in a block code must be________. A) 5 B) 6 C) 11 D) none of the above
Last Answer : 11
Description : To guarantee the detectionof up to 5errors in all cases, the minimum Hamming distance in a block code mustbe _______. A) 5 B) 6 C) 11 D) none of the above
Last Answer : 6
Description : To guarantee the detection of up to 5 errors in all cases, the minimum Hamming distance in a block code must be _______ A. 5 B. 6 C. 11 D. none of the above
Last Answer : B. 6
Description : Which was the world’s first minicomputer and when was it introduced? a. PDP-I, 1958 b. IBM System/36, 1960 c. PDP-II, 1961 d. VAX 11/780, 1962
Last Answer : PDP-I, 1958
Description : how many address lines are needed to address each machine location in a 2048 x 4 memory chip? a. 10 b. 11 c. 8 d. 12
Description : The IEEE 802.11 wireless LANs use ________ types of frames. A) four B) five C) six D) none of the above
Last Answer : none of the above
Description : IEEE 802.11g, has a datarate of _____Mbps. A) 1 B) 2 C) 11 D) 22
Last Answer : 22
Description : The original IEEE 802.11,uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)
Last Answer : either (a)or (b)
Description : . In IEEE 802.11, the addressing mechanism can include upto ______addresses. A) four B) five C) six D) none of the above
Description : In IEEE 802.11, the MAC layer framehas ______ fields. A) four B) five C) six D) none of the above
Last Answer : four
Description : In IEEE 802.11, the ______ is a timerused for collision avoidance. A) NAV B) BSS C) ESS D) none of the above
Last Answer : NAV
Description : In IEEE 802.11, the access method used in the PCF sublayer is ______. A) contention B) controlled C) polling D) none of the above
Last Answer : polling
Description : In IEEE 802.11, the access method used in the DCF sublayer is _________. A) ALOHA B) CSMA/CA C) CSMA/CD D) none of the above
Last Answer : CSMA/CA
Description : In IEEE 802.11, when a frame isgoingfrom one AP to another AP in a wireless distribution system, the address flag is_____ A) 00 B) 01 C) 10 D) 11
Description : In IEEE 802.11, when a frame isgoingfrom a station to an AP, theaddress flag is _____. A) 00 B) 01 C) 10 D) 11
Last Answer : 10
Description : In IEEE 802.11, when a frame is coming from an AP and going to astation, the address flag is _______. A) 00 B) 01 C) 10 D) 11
Last Answer : 01
Description : In IEEE 802.11, when a frame isgoingfrom one station in a BSS toanother without passing through thedistribution system, the address flag is _____ A) 00 B) 01 C) 10 D) 11
Last Answer : 00
Description : In IEEE 802.11, _______ isan optionalaccess method that can be implemented inan infrastructure network (not in an ad hocnetwork). A) DCF B) PCF C) either (a) or (b) D) neither (a) nor (b)
Last Answer : PCF
Description : In IEEE 802.11, astation with ________ mobility can move from one ESS toanother. A) no-transition B) BSS-transition C) ESS-transition D) none of the above
Last Answer : ESS-transition
Description : In IEEE 802.11, astation with ________mobility can move from one BSS toanother, but the movement is confined inside one ESS. A) no-transition B) BSS-transition C) ESS-transition D) none of the above
Last Answer : no-transition
Description : In IEEE 802.11, astation with ________ mobility iseither stationary (not moving) or moving only insidea BSS. A) no-transition B) BSS-transition C) ESS-transition D) none of the above
Description : . In IEEE 802.11, communication between two stations in twodifferent BSSs usually occurs viatwo ________. A) BSSs B) ESSs C) APs D) none of the above
Last Answer : APs
Description : In IEEE 802.11, a BSS with an AP is sometimes referred toas ____________. A) an ad hocarchitecture B) an infrastructurenetwork C) either (a) or (b) D) neither (a) nor (b)
Last Answer : an infrastructurenetwork
Description : In IEEE 802.11, a BSS without an AP is called an _________. A) an ad hocarchitecture B) an infrastructurenetwork C) either (a) or (b) D) neither (a) nor (b)
Last Answer : an ad hocarchitecture
Description : In IEEE 802.11, a___ is made of stationary or mobile wireless stations and anoptional central base station, known as the access point (AP). A) ESS B) BSS C) CSS D) none of the above
Last Answer : BSS
Description : . What is the hexadecimal equivalentof the Ethernet address 01011010 0001000101010101 00011000 10101010 00001111? A) 5A:88:AA:18:55:F0 B) 5A:81:BA:81:AA:0F C) 5A:18:5A:18:55:0F D) 5A:11:55:18:AA:0F
Last Answer : 5A:11:55:18:AA:0F
Description : In modulo-11 arithmetic, we use only the integers inthe range ______, inclusive. A) 1to 10 B) 1to 11 C) 0to 10 D) none of the above
Last Answer : 0to 10
Description : In the network 200.10.11.144/27, the fourth octet (in decimal) of the last IP address of the network which can be assigned to a host is ________ a. 158 b. 255 c. 222 d. 223
Last Answer : a. 158
Description : Which of the following statements is TRUE about CSMA/CD a. IEEE 802.11 wireless LAN runs CSMA/CD protocol b. Ethernet is not based on CSMA/CD protocol c. CSMA/CD is not suitable for a high propagation delay network like satellite network d. There is no contention in a CSMA/CD network
Last Answer : CSMA/CD is not suitable for a high propagation delay
Description : Which of the following is standardized as part of GSM phase 2+ that can offer theoretical data speeds of upto 115 kbit/s? A. EDGE B. GPRS C. WAP D. Bluetooth
Last Answer : B. GPRS
Description : Which of the following is a push mechanism for publishing Web site data that is device- specific? A. WAP B. GPRS C. Bluetooth D. GAP
Last Answer : WAP
Description : Which one out of these is not a data link layer technology: a. Bluetooth b. UART c. WIFI d. HTTP
Last Answer : d. HTTP