Which of the following statements is TRUE about CSMA/CD a. IEEE 802.11 wireless LAN runs CSMA/CD protocol b. Ethernet is not based on CSMA/CD protocolc. CSMA/CD is not suitable for a high propagation delay network like satellite network d. There is no contention in a CSMA/CD network

Which of the following statements is TRUE
about CSMA/CD
a. IEEE 802.11 wireless LAN
runs CSMA/CD protocol
b. Ethernet is not based on
CSMA/CD protocol
c. CSMA/CD is not suitable for
a high propagation delay
network like satellite network
d. There is no contention in a
CSMA/CD network
by

1 Answer

Answer :

CSMA/CD is not suitable for
a high propagation delay
by

Related questions

The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above

Description : The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above

Last Answer : 1-persistent

Which multiple access technique is used by IEEE 802.11 standard for wireless LAN? a. ALOHA b. CSMA/CA c. CDMA d. none of the mentioned

Description : Which multiple access technique is used by IEEE 802.11 standard for wireless LAN? a. ALOHA b. CSMA/CA c. CDMA d. none of the mentioned

Last Answer : b. CSMA/CA

In IEEE 802.11, the access method used in the DCF sublayer is _________. A) ALOHA B) CSMA/CA C) CSMA/CD D) none of the above

Description : In IEEE 802.11, the access method used in the DCF sublayer is _________. A) ALOHA B) CSMA/CA C) CSMA/CD D) none of the above

Last Answer : CSMA/CA

IEEE hasdefined the specifications fora wireless LAN, called _______, whichcovers the physical and data link layers. A) IEEE 802.3 B) IEEE 802.5 C) IEEE 802.11 D) IEEE 802.2

Description : IEEE hasdefined the specifications fora wireless LAN, called _______, whichcovers the physical and data link layers. A) IEEE 802.3 B) IEEE 802.5 C) IEEE 802.11 D) IEEE 802.2

Last Answer : IEEE 802.11

In IEEE 802.11, the access method used in the PCF sublayer is ______. A) contention B) controlled C) polling D) none of the above

Description : In IEEE 802.11, the access method used in the PCF sublayer is ______. A) contention B) controlled C) polling D) none of the above

Last Answer : polling

Match the following IEEE No to their corresponding Name for IEEE 802 standards for LANs. i) 802.3 a) WiFi ii) 802.11 b) WiMa iii) 802.15.1 c) Ethernet iv) 802.16 d) Bluetooth a. i-b, ii-c, iii-d, iv-a b. i-c, ii-d, iii-a, iv-b c. i-c, ii-a, iii-d, iv-b d. i-b, ii-d, iii-c, iv-a

Description : Match the following IEEE No to their corresponding Name for IEEE 802 standards for LANs. i) 802.3 a) WiFi ii) 802.11 b) WiMa iii) 802.15.1 c) Ethernet iv) 802.16 d) Bluetooth a. i-b, ii-c, iii-d, iv-a b. i-c, ii-d, iii-a, iv-b c. i-c, ii-a, iii-d, iv-b d. i-b, ii-d, iii-c, iv-a

Last Answer : c. i-c, ii-a, iii-d, iv-b

In_______, collisions are avoidedthrough theuse of three strategies: the interframe space, the contention window,and acknowledgments. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Description : In_______, collisions are avoidedthrough theuse of three strategies: the interframe space, the contention window,and acknowledgments. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Last Answer : CSMA/CA

In _______, collisions are avoided through the use of three strategies: the interframe space, the contention window, and acknowledgments. A. CSMA/CA B. CSMA/CD C. either (a) or (b)D. both (a) and (b)

Description : In _______, collisions are avoided through the use of three strategies: the interframe space, the contention window, and acknowledgments. A. CSMA/CA B. CSMA/CD C. either (a) or (b) D. both (a) and (b)

Last Answer : A. CSMA/CA

Which IEEE standard is developed for CSMA/CD a. IEEE 802.1 b. IEEE 802.2 c. IEEE 802.3 d. IEEE 802.4

Description : Which IEEE standard is developed for CSMA/CD a. IEEE 802.1 b. IEEE 802.2 c. IEEE 802.3 d. IEEE 802.4

Last Answer : c. IEEE 802.3

The IEEE 802.11 wireless LANs use ________ types of frames. A) four B) five C) six D) none of the above

Description : The IEEE 802.11 wireless LANs use ________ types of frames. A) four B) five C) six D) none of the above

Last Answer : none of the above

In IEEE 802.11, when a frame isgoingfrom one AP to another AP in a wireless distribution system, the address flag is_____ A) 00 B) 01 C) 10 D) 11

Description : In IEEE 802.11, when a frame isgoingfrom one AP to another AP in a wireless distribution system, the address flag is_____ A) 00 B) 01 C) 10 D) 11

Last Answer : 11

In IEEE 802.11, a___ is made of stationary or mobile wireless stations and anoptional central base station, known as the access point (AP). A) ESS B) BSS C) CSS D) none of the above

Description : In IEEE 802.11, a___ is made of stationary or mobile wireless stations and anoptional central base station, known as the access point (AP). A) ESS B) BSS C) CSS D) none of the above

Last Answer : BSS

IEEE 802.3ab defines Gigabit Ethernet transmission over unshieldedtwisted pair (UTP) category 5, 5e or 6 cabling known as .................... a. 1000 BASE-T b. 1000 BASE-SX c. 1000 BASE-LX d. 1000 BASE-CX

Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... a. 1000 BASE-T b. 1000 BASE-SX c. 1000 BASE-LX d. 1000 BASE-CX

Last Answer : a. 1000 BASE-T

What is the difference between the Ethernet frame preamble field and the IEEE 802.3 preamble and start of frame Delimiter fields? a. 1 byte b. 1 bit c. 4 bit d. 16 bit

Description : What is the difference between the Ethernet frame preamble field and the IEEE 802.3 preamble and start of frame Delimiter fields? a. 1 byte b. 1 bit c. 4 bit d. 16 bit

Last Answer : a. 1 byte

In IEEE 802.11, _______ isan optionalaccess method that can be implemented inan infrastructure network (not in an ad hocnetwork). A) DCF B) PCF C) either (a) or (b) D) neither (a) nor (b)

Description : In IEEE 802.11, _______ isan optionalaccess method that can be implemented inan infrastructure network (not in an ad hocnetwork). A) DCF B) PCF C) either (a) or (b) D) neither (a) nor (b)

Last Answer : PCF

Match the following IEEE No to their corresponding Name for IEEE 802 standards for LANs. i) 802.3 a) WiFi ii) 802.11 b) WiMa iii) 802.15.1 c) Ethernet iv) 802.16 d) Bluetooth A) i-b, ii-c, iii-d, iv-a B) i-c, ii-d, iii-a, iv-b C) i-c, ii-a, iii-d, iv-b D) i-b, ii-d, iii-c, iv-a

Description : Match the following IEEE No to their corresponding Name for IEEE 802 standards for LANs. i) 802.3 a) WiFi ii) 802.11 b) WiMa iii) 802.15.1 c) Ethernet iv) 802.16 d) Bluetooth A) i-b, ii-c, iii-d, iv-a B) i-c, ii-d, iii-a, iv-b C) i-c, ii-a, iii-d, iv-b D) i-b, ii-d, iii-c, iv-a

Last Answer : C) i-c, ii-a, iii-d, iv-b

_____________ is a collection of wired Ethernet standard for the link layer. A. IEEE 802.3 B. IEEE 802.11 C. IEEE 802.16 D. IEEE 802.15.4

Description : _____________ is a collection of wired Ethernet standard for the link layer. A. IEEE 802.3 B. IEEE 802.11 C. IEEE 802.16 D. IEEE 802.15.4

Last Answer : A. IEEE 802.3 

In Ethernet CSMA/CD, the special bit sequence transmitted by media access management to handle collision is called a. Preamble b. Postamble c. Jam d. None of the above

Description : In Ethernet CSMA/CD, the special bit sequence transmitted by media access management to handle collision is called a. Preamble b. Postamble c. Jam d. None of the above

Last Answer : c. Jam

In IEEE 802.11, astation with ________ mobility can move from one ESS toanother. A) no-transition B) BSS-transition C) ESS-transition D) none of the above

Description : In IEEE 802.11, astation with ________ mobility can move from one ESS toanother. A) no-transition B) BSS-transition C) ESS-transition D) none of the above

Last Answer : ESS-transition

In IEEE 802.11, astation with ________mobility can move from one BSS toanother, but the movement is confined inside one ESS. A) no-transition B) BSS-transition C) ESS-transition D) none of the above

Description : In IEEE 802.11, astation with ________mobility can move from one BSS toanother, but the movement is confined inside one ESS. A) no-transition B) BSS-transition C) ESS-transition D) none of the above

Last Answer : no-transition

In IEEE 802.11, astation with ________ mobility iseither stationary (not moving) or moving only insidea BSS. A) no-transition B) BSS-transition C) ESS-transition D) none of the above

Description : In IEEE 802.11, astation with ________ mobility iseither stationary (not moving) or moving only insidea BSS. A) no-transition B) BSS-transition C) ESS-transition D) none of the above

Last Answer : no-transition

The IEEE 802.11standardfor wireless LANs defines twoservices: ______and_______. A) BSS; ASS B) ESS; SSS C) BSS; ESS D) BSS; DCF

Description : The IEEE 802.11standardfor wireless LANs defines twoservices: ______and_______. A) BSS; ASS B) ESS; SSS C) BSS; ESS D) BSS; DCF

Last Answer : BSS; ESS

Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Description : Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Last Answer : d. 256

Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Description : Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Last Answer : c. 464

The minimum frame size required for a CSMA/CD based computer network running at 1 Gbps on a 200m cable with a link speed of 2 × 108m/s is a. 125 bytes b. 250 bytes c. 500 bytes d. None of these

Description : The minimum frame size required for a CSMA/CD based computer network running at 1 Gbps on a 200m cable with a link speed of 2 × 108m/s is a. 125 bytes b. 250 bytes c. 500 bytes d. None of these

Last Answer : b. 250 bytes

IEEE 802.11g, has a datarate of _____Mbps. A) 1 B) 2C) 11 D) 22

Description : IEEE 802.11g, has a datarate of _____Mbps. A) 1 B) 2 C) 11 D) 22

Last Answer : 22

The original IEEE 802.11,has a data rate of _____Mbps. A) 1 B) 6 C) 11 D) 22

Description : The original IEEE 802.11,has a data rate of _____Mbps. A) 1 B) 6 C) 11 D) 22

Last Answer : 1

The original IEEE 802.11,uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)

Description : The original IEEE 802.11,uses _________. A) FHSS B) DSSS C) OFDM D) either (a)or (b)

Last Answer : either (a)or (b)

. In IEEE 802.11, the addressing mechanism can include upto ______addresses. A) four B) five C) six D) none of the above

Description : . In IEEE 802.11, the addressing mechanism can include upto ______addresses. A) four B) five C) six D) none of the above

Last Answer : none of the above

In IEEE 802.11, the MAC layer framehas ______ fields. A) four B) five C) six D) none of the above

Description : In IEEE 802.11, the MAC layer framehas ______ fields. A) four B) five C) six D) none of the above

Last Answer : four

In IEEE 802.11, the ______ is a timerused for collision avoidance. A) NAV B) BSS C) ESS D) none of the above

Description : In IEEE 802.11, the ______ is a timerused for collision avoidance. A) NAV B) BSS C) ESS D) none of the above

Last Answer : NAV

In IEEE 802.11, when a frame isgoingfrom a station to an AP, theaddress flag is _____. A) 00 B) 01 C) 10 D) 11

Description : In IEEE 802.11, when a frame isgoingfrom a station to an AP, theaddress flag is _____. A) 00 B) 01 C) 10 D) 11

Last Answer : 10

In IEEE 802.11, when a frame is coming from an AP and going to astation, the address flag is _______. A) 00 B) 01 C) 10 D) 11

Description : In IEEE 802.11, when a frame is coming from an AP and going to astation, the address flag is _______. A) 00 B) 01 C) 10 D) 11

Last Answer : 01

In IEEE 802.11, when a frame isgoingfrom one station in a BSS toanother without passing through thedistribution system, the address flag is _____ A) 00 B) 01 C) 10 D) 11

Description : In IEEE 802.11, when a frame isgoingfrom one station in a BSS toanother without passing through thedistribution system, the address flag is _____ A) 00 B) 01 C) 10 D) 11

Last Answer : 00

. In IEEE 802.11, communication between two stations in twodifferent BSSs usually occurs viatwo ________. A) BSSs B) ESSs C) APs D) none of the above

Description : . In IEEE 802.11, communication between two stations in twodifferent BSSs usually occurs viatwo ________. A) BSSs B) ESSs C) APs D) none of the above

Last Answer : APs

In IEEE 802.11, a BSS with an AP is sometimes referred toas ____________. A) an ad hocarchitecture B) an infrastructurenetworkC)either (a) or (b)D)neither (a) nor (b)

Description : In IEEE 802.11, a BSS with an AP is sometimes referred toas ____________. A) an ad hocarchitecture B) an infrastructurenetwork C) either (a) or (b) D) neither (a) nor (b)

Last Answer : an infrastructurenetwork

In IEEE 802.11, a BSS without an AP is called an _________. A) an ad hocarchitecture B) an infrastructurenetwork C) either (a) or (b) D) neither (a) nor (b)

Description : In IEEE 802.11, a BSS without an AP is called an _________. A) an ad hocarchitecture B) an infrastructurenetwork C) either (a) or (b) D) neither (a) nor (b)

Last Answer : an ad hocarchitecture

Identify the non suitable medium for 802.3 ethernet?a. A thin coaxial cable b. A twisted pair cable c. A microwave link d. A fiber optical cable

Description : Identify the non suitable medium for 802.3 ethernet? a. A thin coaxial cable b. A twisted pair cable c. A microwave link d. A fiber optical cable

Last Answer : c. A microwave link

Which of the following is the multiple access protocol for channel access control? a. CSMA/CD b. CSMA/CA c. Both CSMA/CD & CSMA/CA d. HDLC

Description : Which of the following is the multiple access protocol for channel access control? a. CSMA/CD b. CSMA/CA c. Both CSMA/CD & CSMA/CA d. HDLC

Last Answer : c. Both CSMA/CD & CSMA/CA

Which of the following is the multiple access protocol for channel access control? A. CSMA/CD B. CSMA/CA C. Both CSMA/CD & CSMA/CA D. HDLC

Description : Which of the following is the multiple access protocol for channel access control? A. CSMA/CD B. CSMA/CA C. Both CSMA/CD & CSMA/CA D. HDLC

Last Answer : C. Both CSMA/CD & CSMA/CA

Which IEEE standards specify the technologies for wireless LANs 802.11 a. IEEE 802.11 b. IEEE 802.10 c. IEEE 279.6 d. IEEE 275.4

Description : Which IEEE standards specify the technologies for wireless LANs 802.11 a. IEEE 802.11 b. IEEE 802.10 c. IEEE 279.6 d. IEEE 275.4

Last Answer : a. IEEE 802.11

Which IEEE standards specify the technologies for wireless LANs 802.11 a. IEEE 802.11 b. IEEE 802.10 c. IEEE 279.6 d. IEEE 275.4

Description : Which IEEE standards specify the technologies for wireless LANs 802.11 a. IEEE 802.11 b. IEEE 802.10 c. IEEE 279.6 d. IEEE 275.4

Last Answer : a. IEEE 802.11

____ is a collection of wireless broadband standards (WiMax). A. IEEE 802.3 B. IEEE 802.11 C. IEEE 802.16 D. IEEE 802.15.4

Description : ____ is a collection of wireless broadband standards (WiMax). A. IEEE 802.3 B. IEEE 802.11 C. IEEE 802.16 D. IEEE 802.15.4

Last Answer : C. IEEE 802.16 

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

Toavoid collisions on wireless networks, ________was invented. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Description : Toavoid collisions on wireless networks, ________was invented. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Last Answer : CSMA/CA

IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... A) 1000 BASE-T B) 1000 BASE-SX C) 1000 BASE-LX D) 1000 BASE-CX

Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... A) 1000 BASE-T B) 1000 BASE-SX C) 1000 BASE-LX D) 1000 BASE-CX

Last Answer : A) 1000 BASE-T

IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... A) 1000 BASE-T B) 1000 BASE-SX C) 1000 BASE-LX D) 1000 BASE-CX

Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... A) 1000 BASE-T B) 1000 BASE-SX C) 1000 BASE-LX D) 1000 BASE-CX

Last Answer : A) 1000 BASE-T

Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Last Answer : d. 20000

Which of the following is not a standard of WLAN? a) HIPER-LAN b) HIPERLAN/2 c) IEEE 802.11b d) AMPS

Description : Which of the following is not a standard of WLAN? a) HIPER-LAN b) HIPERLAN/2 c) IEEE 802.11b d) AMPS

Last Answer : d) AMPS

The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channelcapacity. Assuming that processing delay is negligible, the minimum number of bits for the sequence number field in a frame for maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Description : The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channel capacity. Assuming that processing ... maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Last Answer : c. C