Description : Which is used for manufacturing chips? a. Bus b. Control unit c. Semiconductors d. A and b only
Last Answer : . Semiconductors
Description : Which is used for manufacturing chips? A) Bus B) Control unit C) Semiconductors D) A and b only
Last Answer : Answer : C
Last Answer : c. Semiconductors
Description : Which of the following is used for manufacturing chips? A) Control bus B) Control unit C) Parity unit D) Semiconductor
Last Answer : Answer : D
Description : Which of the following is used for manufacturing chips? a. Control bus b. Control unit c. Parity unit d. Semiconductor
Last Answer : d. Semiconductor
Description : Which of the following are the two main components of the CPU? a. Control unit and registers b. Registers and main memory c. Control Unit and ALU d. ALU and bus
Last Answer : Control Unit and ALU
Description : which chips using special external equipment can reprogram a. ROM b. PROM c. SAM d. RAM
Last Answer : PROM
Description : The two major types of computer chips are a. External memory chip b. Primary memory chip c. Microprocessor chip d. Both b and c
Last Answer : Both b and c
Description : Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard
Last Answer : Motherboard
Description : IMB launched its first personal computer called IBM-PC in 1981. It had chips from Intel, disk drives from Tandon, operating system from Microsoft, the printer from Epson and the application software from ... the country which contributed the video display? a. India b. China c. Germany d. Taiwan
Last Answer : Taiwan
Description : ______ is based oncoding theory and uses sequencesof numbers called chips. A) FDMA B) TDMA C) CDMA D) none of the above
Last Answer : CDMA
Description : State weather the following statement is true or false for Token Bus 1).It is a linear or tree- shaped cable onto which the stations are attached. 2). the token propagates around the logical ring, with only the token holder ... 3. false C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false
Last Answer : D. 1. true, 2. true, 3. false
Description : Your company has a LAN in its downtown officeandhas now set upa LAN inthe manufacturing plant inthe suburbs. Toenable everyoneto sharedata and resources between the two LANs, what type of device(s) are neededto connect them? Choose the most correct answer. A. Modem B. Cable C. Hub D. Router
Last Answer : Router
Description : Dot-matrix is a type of a. Tape e. Printer f. Disk g. Bus
Last Answer : Printer
Description : Which of the following transmission systems provide the highest data rate to in individual device? a. computer bus b. telephone lines c. voice and mode d. lease lines
Last Answer : computer bus
Description : ______ is the most widelyused local area networkprotocol. A) Token Ring B) Token Bus C) Ethernet D) none of the above
Last Answer : Ethernet
Description : A backbone is usually a ______. A) bus B) star C) either (a)or (b) D) neither (a) nor (b)
Last Answer : either (a)or (b)
Description : Which ports connect special typesof music instruments tosound cards ? (A) BUS (B) CPU (C) USB (D) MIDI (E) MINI
Last Answer : USB
Description : Devices may bearrangedin a _____ topology. A) mesh B) ring C) bus D) all of theabove
Last Answer : all of theabove
Description : Which topology requires a multipoint connection? A) Mesh B) Star C) Bus D) Ring
Last Answer : Bus
Description : Which topology requires acentral controller or hub? A) Mesh B) Star C) Bus D) Ring
Last Answer : Star
Description : Which network topology is consideredpassive? A. Cross B. Ring C. Star D. Mesh E. Bus
Description : A central computer surrounded by one or more satellite computers is called a A. bus network B. ring network C. star network D. All of theabove E. None of the above
Last Answer : star network
Description : FDDI isa A. ring network B. star network C. mesh network D. bus based network E. None of the above
Last Answer : ring network
Description : A distributed network configurationin which all data/information pass througha central computer is A. bus network B. star network C. ring network D. Point-to-point network E. None of the above
Description : was the first step in the evolution of Ethernet from a coaxial cable bus to hub managed, twisted pair network. a. Star LAN b. Ring LAN c. Mesh LAN d. All of the above
Last Answer : a. Star LAN
Description : Which of the following is the logical topology? A) Bus B) Tree C) Star D) Both A and B
Last Answer : C) Star
Description : State whether the following is True or False. i) In bus topology, heavy Network traffic slows down the bus speed. ii) It is multipoint configuration. A) True, True B) B) True, False C) False, True D) False, False
Last Answer : A) True, True
Description : In a topology, if there are n devices in a network, each device has n-1 ports for cables. A) Mesh B) Star C) Bus D) Ring
Last Answer : A) Mesh
Description : A network that needs human beings to manually route signals is called.... A) Fiber Optic Network B) Bus Network C) T-switched network D) Ring network
Last Answer : C) T-switched network
Description : If all devices are connected to a central hub, then topology is called A) Bus Topology B) Ring Topology C) Star Topology D) Tree Topology
Last Answer : C) Star Topology
Description : Ethernet system uses which of the following technology. A) Bus B) Ring C) Star D) Tree
Last Answer : A) Bus
Description : FDDI used which type of physical topology? A) Bus B) Ring C) Star D) Tree
Last Answer : B) Ring
Description : Which one is not a network topology? a. Star b. Ring c. Bus d. Peer to Peer
Last Answer : d. Peer to Peer
Description : For large networks, which topology is used? a. Bus b. Tree c. Ring d. Mesh
Last Answer : b. Tree
Description : In which topology, if a computer’s network cable is broken, whole network goes down. a. Ring b. Star c. Bus d. token ring
Last Answer : c. Bus
Description : Terminators are used in which topology? a. Bus b. Star c. Ring d. token ring
Last Answer : a. Bus
Description : Which network topology requires a central controller or hub? a) Star b) Mesh c) Ring d) Bus
Last Answer : a) Star
Description : Multipoint topology is a. Ring b. Mesh c. Bus d. Star
Description : The network topology that is bi-directional links between each possible node. a. Star b. Mesh c. Bus d. Ring
Last Answer : b. Mesh
Description : In ------ topology cable is broken, networks get down. a. Star b. Mesh c. Bus d. Ring
Description : Terminators are used intopology a. Ring b. Bus c. Star d. Mesh
Last Answer : b. Bus
Description : Explain the frame format for token ring and token bus
Last Answer : Access method: Token passing _ Priority and reservation _ Time limits _ Monitor stations
Description : In ________APS, there is only one protection line for many workinglines. When afailure occurs in oneof the working lines, the protectionline takes control until the failedline is repaired. A) one-plus-one B) one-to-one C) one-to-many D) none of the above
Last Answer : one-to-many
Description : In asynchronous serial communication the physical layer provides ___________ a. start and stop signalling b. flow control c. both start & stop signalling and flow control d. only start signalling
Last Answer : c. both start & stop signalling and flow control
Description : State weather the following statement is true or false for Stream Control Transmission Protocol (SCTP). 1). SCTP uses only few known ports in the TCP space. 2).SCTP is a new transport protocol at the same layer as TCP and ... , 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true
Last Answer : D. 1.false, 2. true, 3. true
Description : You are attempting to parallel two AC generators and the synchroscope pointer is revolving slowly in the fast direction. You should _____________. A. use the governor control switch to adjust the incoming ... the 0° position D. use the field rheostat to adjust the speed of the incoming machine
Last Answer : Answer: C
Description : The ________ ensures that only one IC is active at a time to avoid a bus conflict caused by two ICs writing different data to the same bus.A.control busB.control instructionsC. address decoder D.CPU
Last Answer : C. address decoder