Description : ________ is actually a multiport repeater. It is normally usedto createconnections between stations in a physical star topology. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)
Last Answer : An activehub
Description : ______ isa standard developed by ITU-T. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)
Last Answer : either (a) or (b)
Description : In Frame Relay, when. ______ is selected, it requires establishing andterminatingphases A) a PVC B) an SVC C) either (a) or (b) D) neither (a) nor (b)
Last Answer : an SVC
Description : In IEEE 802.11, _______ isan optionalaccess method that can be implemented inan infrastructure network (not in an ad hocnetwork). A) DCF B) PCF C) either (a) or (b) D) neither (a) nor (b)
Last Answer : PCF
Description : In IEEE 802.11, a BSS with an AP is sometimes referred toas ____________. A) an ad hocarchitecture B) an infrastructurenetwork C) either (a) or (b) D) neither (a) nor (b)
Last Answer : an infrastructurenetwork
Description : In IEEE 802.11, a BSS without an AP is called an _________. A) an ad hocarchitecture B) an infrastructurenetwork C) either (a) or (b) D) neither (a) nor (b)
Last Answer : an ad hocarchitecture
Description : _______ ispart of the media; its location in the Internet model is below thephysical layer. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)
Last Answer : A passivehub
Description : In astar-topology Ethernet LAN, _______ is just a point where the signals coming from different stations collide; it is thecollision point. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)
Description : _________is just aconnector. A) An activehub B) A passive hub C) either (a)or (b) D) neither (a)nor (b)
Last Answer : A passive hub
Description : Analog-to-analog conversionis needed if the available bandwidthis _______. A) low-pass B) band-pass C) either (a)or (b) D) neither (a) nor (b)
Last Answer : band-pass
Description : A(n)_________ signal is a composite analogsignal with an infinite bandwidth. A) digital B) analog C) either (a)or (b) D) neither (a) nor (b
Last Answer : digital
Description : Signals can be ________. A) analog B) digital C) either (a)or (b) D) neither (a) nor (b)
Last Answer : either (a)or (b)
Description : A ring SONET network can be _________. A) unidirectional B) bidirectional. C) either (a) or (b) D) neither (a) nor (b)
Last Answer : bidirectional.
Description : A linear SONET network can be __________. A) point-to-point B) multipoint C) either (a) or (b) D) neither (a) nor (b)
Last Answer : point-to-point
Description : SDH hasdefined ahierarchy of signals called ________. A) STSs B) STMs C) either (a) or (b) D) neither (a) nor (b)
Last Answer : STSs
Description : isa standard developed by ANSI for fiber-opticnetworks. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)
Last Answer : SDH
Description : At the data link layer, Frame Relayusesa protocol that supports _____control. A) flow B) error C) either (a) or (b D) neither (a) nor (b)
Last Answer : neither (a) nor (b)
Description : In Frame Relay, when a _____ is selected, the correspondingtable entry is recorded for all switches by the administrator A) PVC B) SVC C) either (a) or (b) D) neither (a) nor (b)
Last Answer : PVC
Description : Frame Relay provides ________. A) PVCs B) SVCs C) either (a) or (b) D) neither (a) nor (b)
Last Answer : Frame Relay
Description : The …………………... option tells netstat to display the status of all configured network interfaces. A. -n B. -i C. either a or b D. neither a nor b
Last Answer : B. -i
Description : When internet data leaves your campus, it normallygoes toa(n) ______ before moving towardits destination. A) Internet backbone B) Networkaccesspoint C) Base station D) Communication system
Last Answer : Networkaccesspoint
Description : A data terminal serves as an a. Effector b. sensor c. both a and b d. neither a nor b
Last Answer : both a and b
Description : In__________, eachstation is forced to send only at the beginning of the time slot. A) pure ALOHA B) slotted ALOHA C) both (a) and (b) D) neither (a) nor (b)
Last Answer : slotted ALOHA
Description : Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)
Last Answer : both (a) and (b)
Description : In___________ thereis alwaysa transition at the middle of the bit, but thebit values are determined at the beginningof the bit. If the nextbit is 0, there is a transition; if the next bit is 1, there is none. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)
Last Answer : differential Manchester
Description : In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit ... Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)
Description : The idea of RZ andthe ideaof NRZ-I are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)
Description : The idea of RZ andthe ideaof NRZ-L are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)
Last Answer : Manchester
Description : In______, the changeor lackof change in the level of the voltagedetermines the value of the bit. A) NRZ-I B) NRZ-L C) both (a)and (b) D) neither (a) nor (b)
Last Answer : NRZ-I
Description : In_____, the level of the voltagedetermines the valueof the bit. A) NRZ-I B) NRZ-L C) both (a) and (b) D) neither (a) nor (b)
Last Answer : NRZ-L
Description : _________ does not provide reliable end to end communication. a. TCP b. UDP c. Both TCP and UDP d. Neither TCP nor UDP
Last Answer : b. UDP
Description : A ……………………….. is built from the information exchanged by routing protocols. A. static routing table B. dynamic routing table C. both a and b D. neither a nor b
Last Answer : B. dynamic routing table
Description : . A ………………………... is constructed manually by the system administrator using the route command. A. static routing table B. dynamic routing table C. both a and b D. neither a nor b
Last Answer : A. static routing table
Description : Which topology requires a multipoint connection? A) Mesh B) Star C) Bus D) Ring
Last Answer : Bus
Description : Which topology requires acentral controller or hub? A) Mesh B) Star C) Bus D) Ring
Last Answer : Star
Description : Which network topology is consideredpassive? A. Cross B. Ring C. Star D. Mesh E. Bus
Description : A central computer surrounded by one or more satellite computers is called a A. bus network B. ring network C. star network D. All of theabove E. None of the above
Last Answer : star network
Description : FDDI isa A. ring network B. star network C. mesh network D. bus based network E. None of the above
Last Answer : ring network
Description : A distributed network configurationin which all data/information pass througha central computer is A. bus network B. star network C. ring network D. Point-to-point network E. None of the above
Description : was the first step in the evolution of Ethernet from a coaxial cable bus to hub managed, twisted pair network. a. Star LAN b. Ring LAN c. Mesh LAN d. All of the above
Last Answer : a. Star LAN
Description : Which of the following is the logical topology? A) Bus B) Tree C) Star D) Both A and B
Last Answer : C) Star
Description : In a topology, if there are n devices in a network, each device has n-1 ports for cables. A) Mesh B) Star C) Bus D) Ring
Last Answer : A) Mesh
Description : If all devices are connected to a central hub, then topology is called A) Bus Topology B) Ring Topology C) Star Topology D) Tree Topology
Last Answer : C) Star Topology
Description : Ethernet system uses which of the following technology. A) Bus B) Ring C) Star D) Tree
Last Answer : A) Bus
Description : FDDI used which type of physical topology? A) Bus B) Ring C) Star D) Tree
Last Answer : B) Ring
Description : Which one is not a network topology? a. Star b. Ring c. Bus d. Peer to Peer
Last Answer : d. Peer to Peer
Description : In which topology, if a computer’s network cable is broken, whole network goes down. a. Ring b. Star c. Bus d. token ring
Last Answer : c. Bus
Description : Terminators are used in which topology? a. Bus b. Star c. Ring d. token ring
Last Answer : a. Bus
Description : Which network topology requires a central controller or hub? a) Star b) Mesh c) Ring d) Bus
Last Answer : a) Star
Description : Multipoint topology is a. Ring b. Mesh c. Bus d. Star