In ________APS, there is only one protection line for many workinglines. When afailure occurs in oneof the working lines, the protectionline takes control until the failedline is repaired. A) one-plus-one B) one-to-one C) one-to-many D) none of the above

In ________APS, there is only one protection line for many workinglines. When afailure occurs in oneof the working lines, the protectionline takes
control until the failedline is repaired.
A)
one-plus-one
B)
one-to-one
C)
one-to-many
D)
none of the above
by

1 Answer

Answer :

one-to-many
by

Related questions

. In ______ APS, there is one working line and one protection line. Thedata arenormally senton the working line until it fails. A) one-plus-one B) one-to-one C) one-to-many D) none of the above

Description : . In ______ APS, there is one working line and one protection line. Thedata arenormally senton the working line until it fails. A) one-plus-one B) one-to-one C) one-to-many D) none of the above

Last Answer : one-to-one

In ________ APS, there arenormally two lines: one workingline andone protection line. Bothlines areactive all the time. A) one-plus-one B) one-to-one C) one-to-many D) none of the above

Description : In ________ APS, there arenormally two lines: one workingline andone protection line. Bothlines areactive all the time. A) one-plus-one B) one-to-one C) one-to-many D) none of the above

Last Answer : one-plus-one

Are the balck spots on the leaves of oneof our maple trees harmful to the tree?

Description : Are the balck spots on the leaves of oneof our maple trees harmful to the tree?

Last Answer : Need Answer

Inthe _________ method, after the station finds the lineidle, it sends its frame immediately. If the line isnot idle, it continuously senses theline until it finds it idle. A) nonpersistent B) 1-persistent C) p-persistent D) none of the above

Description : Inthe _________ method, after the station finds the lineidle, it sends its frame immediately. If the line isnot idle, it continuously senses theline until it finds it idle. A) nonpersistent B) 1-persistent C) p-persistent D) none of the above

Last Answer : 1-persistent

Where can I get my brake lines repaired at?

Description : Where can I get my brake lines repaired at?

Last Answer : Pep Boys is a good place to go for brake system repairs. Look in the Yellow pages for your local listings of brake repair specialists. If Midas is located near you, they are another well known brake repair shop.

Circuit switching takes place at the________ layer. A) data line B) physical C) network D) transport

Description : Circuit switching takes place at the________ layer. A) data line B) physical C) network D) transport

Last Answer : physical

A remote batch-processing operation in which data is solely input to a central computer would require a. telegraphp line b. simplex lines c. mixed bad channel d. all of above

Description : A remote batch-processing operation in which data is solely input to a central computer would require a. telegraphp line b. simplex lines c. mixed bad channel d. all of above

Last Answer : simplex lines

The TCP sliding window a. can be used to control the flow of information b. always occurs when the field value is 0 c. always occurs when the field value is 1 d. occurs horizontally

Description : The TCP sliding window a. can be used to control the flow of information b. always occurs when the field value is 0 c. always occurs when the field value is 1 d. occurs horizontally

Last Answer : a. can be used to control the flow of information

In open-loop control, policies are applied to __________ A. Remove after congestion occurs B. Remove after sometime C. Prevent before congestion occurs D. Prevent before sending packets

Description : In open-loop control, policies are applied to __________ A. Remove after congestion occurs B. Remove after sometime C. Prevent before congestion occurs D. Prevent before sending packets

Last Answer : C. Prevent before congestion occurs

Inthe _____ Protocol, the sender sends one frame, stops until it receives confirmation from the receiver, and then sends the next frame. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Description : Inthe _____ Protocol, the sender sends one frame, stops until it receives confirmation from the receiver, and then sends the next frame. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Last Answer : Stop-and-Wait

In _______, the resources need to bereserved during the setup phase; the resources remain dedicated for the entire durationof data transfer phase until the teardownphase. A) datagram switching B) circuit switching C) frame switching D) none of the above

Description : In _______, the resources need to bereserved during the setup phase; the resources remain dedicated for the entire durationof data transfer phase until the teardownphase. A) datagram switching B) circuit switching C) frame switching D) none of the above

Last Answer : circuit switching

In the ________ algorithm of TCP, the size of the congestion window increases exponentially until it reaches a threshold A. slow-start B. congestion avoidance C. congestion detection D. none of the above

Description : In the ________ algorithm of TCP, the size of the congestion window increases exponentially until it reaches a threshold A. slow-start B. congestion avoidance C. congestion detection D. none of the above

Last Answer : A. slow-start

Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control)c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

Transmission control protocol ___________ a) is a connection-oriented protocol b) is a connectionless protocol c) is a protocol working on application layer d) all of the mentioned

Description : Transmission control protocol ___________ a) is a connection-oriented protocol b) is a connectionless protocol c) is a protocol working on application layer d) all of the mentioned

Last Answer : a) is a connection-oriented protoco

Any method for controlling access to or use of memory is known a. Memory map b. Memory protection c. Memory management d. Memory instruction

Description : Any method for controlling access to or use of memory is known a. Memory map b. Memory protection c. Memory management d. Memory instruction

Last Answer : Memory protection

SSL is not responsible for a. Mutual authentication of client & server b. Secret communication c. Data Integrity protection d. Error detection and correction

Description : SSL is not responsible for a. Mutual authentication of client & server b. Secret communication c. Data Integrity protection d. Error detection and correction

Last Answer : d. Error detection and correction

A husband and wife are seated facing each other with a barrier between them. Each one takes turns communicating with the other, each speaking only two words at a time. After each two-word message is conveyed, the other person answers with a one-word response. This goes on for some time, until at last, either the husband or his wife suddenly shouts out a four-word phrase which ends this scenario; however, this often causes either the husband or the wife to become angry or frustrated with the person who shouted the four-word phrase. What is going on here? -Riddles

Description : A husband and wife are seated facing each other with a barrier between them. Each one takes turns communicating with the other, each speaking only two words at a time. After each two-word message is ... or frustrated with the person who shouted the four-word phrase. What is going on here? -Riddles

Last Answer : The husband and wife are playing the old game of BATTLESHIP. The two-word communications consist of a letter and a number for the coordinates of where the ships are hidden, and the one-word responses are ... ' or 'Miss'. The final four word phrase which ends the game is, 'You Sank My Battleship!

When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errorsd. all of the above

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit

Description : HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit

Last Answer : High-leveldata link control

Which of the following devices takes data sent from one network device and forwards it to the destination node based on MAC address ? a. Hub b. Modem c. Switch d. Gateway

Description : Which of the following devices takes data sent from one network device and forwards it to the destination node based on MAC address ? a. Hub b. Modem c. Switch d. Gateway

Last Answer : c. Switch

The data link layer takes the packets from _________ and encapsulates them into frames for transmission. a) network layer b) physical layer c) transport layer d) application layer

Description : The data link layer takes the packets from _________ and encapsulates them into frames for transmission. a) network layer b) physical layer c) transport layer d) application layer

Last Answer : a) network layer

In a telephone system, the customer’s telephone directory numbering is from 000 to 999, what is the capacity of the system? A. 1000 lines B. 100,000 lines C. D. 100 lines lines

Description : In a telephone system, the customer’s telephone directory numbering is from 000 to 999, what is the capacity of the system? A. 1000 lines B. 100,000 lines C. 10,000 lines D. 100 lines

Last Answer : A. 1000 lines

Different components on the motherboard of a PC processor unit are linked together by sets or parallel electrical conducting lines. What are these lines called? a. Conductors b. Buses c. Connectors d. Connectively

Description : Different components on the motherboard of a PC processor unit are linked together by sets or parallel electrical conducting lines. What are these lines called? a. Conductors b. Buses c. Connectors d. Connectively

Last Answer : Buses

Which of the following does not affect the resolution of a video display image? a. Bandwidth b. Raster scan rage c. Vertical and horizontal lines of resolution d. Screen size

Description : Which of the following does not affect the resolution of a video display image? a. Bandwidth b. Raster scan rage c. Vertical and horizontal lines of resolution d. Screen size

Last Answer : Screen size

how many address lines are needed to address each machine location in a 2048 x 4 memory chip? a. 10 b. 11 c. 8 d. 12

Description : how many address lines are needed to address each machine location in a 2048 x 4 memory chip? a. 10 b. 11 c. 8 d. 12

Last Answer : 11

Which of the following transmission systems provide the highest data rate to in individual device? a. computer bus b. telephone lines c. voice and mode d. lease lines

Description : Which of the following transmission systems provide the highest data rate to in individual device? a. computer bus b. telephone lines c. voice and mode d. lease lines

Last Answer : computer bus

The channel in the data communication model can be a. postal mail services b. telephone lines c. radio lines d. any of the above

Description : The channel in the data communication model can be a. postal mail services b. telephone lines c. radio lines d. any of the above

Last Answer : any of the above

Which of the following communications lines is best suited to interactive processing applications? a. narrow band channel b. simplex lines c. full duplex lines d. mixed band channels

Description : Which of the following communications lines is best suited to interactive processing applications? a. narrow band channel b. simplex lines c. full duplex lines d. mixed band channels

Last Answer : full duplex lines

Most data communications involving telegraph lines use: a. simplex lines b. wideband channel c. narrowband channel d. dialed service

Description : Most data communications involving telegraph lines use: a. simplex lines b. wideband channel c. narrowband channel d. dialed service

Last Answer : narrowband channel

Which of the following is not a transmission medium? a. telephone lines b. coaxial cables c. modem d. microwave systems

Description : Which of the following is not a transmission medium? a. telephone lines b. coaxial cables c. modem d. microwave systems

Last Answer : microwave systems

The interactive transmission of data within a time sharing system may be best suited to a. simplex lines b. half-duplex lines c. full duplex lines d. biflex-lines

Description : The interactive transmission of data within a time sharing system may be best suited to a. simplex lines b. half-duplex lines c. full duplex lines d. biflex-lines

Last Answer : half-duplex lines

In a multiplexed system,__ lines share thebandwidthof ____ link. A) 1; n B) 1; 1 C) n; 1 D) n; n

Description : In a multiplexed system,__ lines share thebandwidthof ____ link. A) 1; n B) 1; 1 C) n; 1 D) n; n

Last Answer : n; 1

The pieceof hardware that converts your computer'sdigital signal to ananalog signal that cantravel over telephone lines is called (A) red wire (B) blue cord (C) tower (D) modem (E) None of these

Description : The pieceof hardware that converts your computer'sdigital signal to ananalog signal that cantravel over telephone lines is called (A) red wire (B) blue cord (C) tower (D) modem (E) None of these

Last Answer : modem

Codes consisting of lines of varying widths or lengths that arecomputer-readable are known as– (A) an ASCII code (B) a magnetic tape (C) an OCR scanner (D) a bar code (E) None of these

Description : Codes consisting of lines of varying widths or lengths that arecomputer-readable are known as– (A) an ASCII code (B) a magnetic tape (C) an OCR scanner (D) a bar code (E) None of these

Last Answer : a bar code

The receive equalizer reduces delaydistortions usinga A. tapped delay lines B. gearshift C. descrambler D. difference engine E. None of the above

Description : The receive equalizer reduces delaydistortions usinga A. tapped delay lines B. gearshift C. descrambler D. difference engine E. None of the above

Last Answer : tapped delay lines

Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog conversion at the start of a long distance transmission? A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Description : Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog ... A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Last Answer : Modem

A remote batch-processing operation in which datais solely input toa central computer would requirea: A. telegraphline B. simplex lines C. mixed-band channel D. All the above E. None of the above

Description : A remote batch-processing operation in which datais solely input toa central computer would requirea: A. telegraphline B. simplex lines C. mixed-band channel D. All the above E. None of the above

Last Answer : simplex lines

………………...is a minimal protocol that allows isolated hosts to link via TCP/IP over the telephone network and ………………..uses a proposed international standard for transmitting HDLC over asynchronous lines. A. LCP, PPP B. PPP, LCP C. SLIP, PPP D. PPP, SLIP

Description : ………………...is a minimal protocol that allows isolated hosts to link via TCP/IP over the telephone network and ………………..uses a proposed international standard for transmitting HDLC over asynchronous lines. A. LCP, PPP B. PPP, LCP C. SLIP, PPP D. PPP, SLIP

Last Answer : C. SLIP, PPP

State weather the following statement is true or false for Point-to-Point Protocol 1). It is still in widespread use for dial-up TCP/IP connections 2) Point-to-point circuits in the form of asynchronous lines have long been the mainstay for data communications. 3). Point-to-Point Protocol (PPP) is a network-specific standard protocol with STD number 51. A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1. true, 2. false, 3. true

Description : State weather the following statement is true or false for Point-to-Point Protocol 1). It is still in widespread use for dial-up TCP/IP connections 2) Point-to-point circuits in the form of asynchronous lines have long been ... . false C. 1. false, 2. false, 3. false D. 1. true, 2. false, 3. true

Last Answer : D. 1. true, 2. false, 3. true

In most Wide Area Networks, the subnet consists of two distinct components: which are they? A. Transmission Lines and Switching Elements. B. host and subnet C. Transmission Lines and host D. subnet and Switching Elements.

Description : In most Wide Area Networks, the subnet consists of two distinct components: which are they? A. Transmission Lines and Switching Elements. B. host and subnet C. Transmission Lines and host D. subnet and Switching Elements.

Last Answer : A. Transmission Lines and Switching Elements.

Transmission Lines are also called as…………………. A. circuits B. channels C. trunks D. circuits channels, or trunks

Description : Transmission Lines are also called as…………………. A. circuits B. channels C. trunks D. circuits channels, or trunks

Last Answer : D. circuits channels, or trunks

Do you know anyone with Diabetic Nerve damage who not only stopped its advance but whose nerves then repaired themselves and normalized?

Description : Do you know anyone with Diabetic Nerve damage who not only stopped its advance but whose nerves then repaired themselves and normalized?

Last Answer : answer:I was hoping someone would have an answer, as my father has nuerophathy caused by having a vein removed from his leg to do a heart bypass. He's gone to the pain clinic and tried just ... so far everything I've read about that drug suggests that it can cause permanent nerve damage. Yikes!

. In IEEE 802.11, communication between two stations in twodifferent BSSs usually occurs viatwo ________. A) BSSs B) ESSs C) APs D) none of the above

Description : . In IEEE 802.11, communication between two stations in twodifferent BSSs usually occurs viatwo ________. A) BSSs B) ESSs C) APs D) none of the above

Last Answer : APs

When a beam of light travels through media of two different densities, if theangle of incidence isgreater than the critical angle, _______ occurs. A) reflection B) refraction C) incidence D) criticism

Description : When a beam of light travels through media of two different densities, if theangle of incidence isgreater than the critical angle, _______ occurs. A) reflection B) refraction C) incidence D) criticism

Last Answer : reflection

What occurs in the session layer? a.Data compression and encryption b.MAC address are handled c.binary to decimal conversion d.sessions are created

Description : What occurs in the session layer? a.Data compression and encryption b.MAC address are handled c.binary to decimal conversion d.sessions are created

Last Answer : d.sessions are created

Consider an instance of TCP’s Additive Increase Multiplicative Decrease (AIMD) algorithm where the window size at the start of the slow start phase is 2 MSS and the threshold at the start of the first transmission is 8 MSS. Assume that a timeout occurs during the fifth transmission. Find the congestion window size at the end of the tenth transmission. a. 8 MSS b. 14 MSS c. 7 MSS d. 12 MSS

Description : Consider an instance of TCP's Additive Increase Multiplicative Decrease (AIMD) algorithm where the window size at the start of the slow start phase is 2 MSS and the threshold at the start of the first transmission is ... the end of the tenth transmission. a. 8 MSS b. 14 MSS c. 7 MSS d. 12 MSS

Last Answer : c. 7 MSS

Which mode of Communication occurs between a computer and a keyboard. a. Automatic b. Half-duplex c. Full-duplex d. Simplex

Description : Which mode of Communication occurs between a computer and a keyboard. a. Automatic b. Half-duplex c. Full-duplex d. Simplex

Last Answer : d. Simplex

Congestion in a network or internetwork occurs because routers and switches have _______. A. tables B. queues C. crosspoints D. none of the above

Description : Congestion in a network or internetwork occurs because routers and switches have _______. A. tables B. queues C. crosspoints D. none of the above

Last Answer : B. queues

What is meant by congestion? Why the congestion occurs in network?

Description : What is meant by congestion? Why the congestion occurs in network?

Last Answer : Congestion in a network occurs if user sends data into the network at a rate greater than that allowed by network resources. Congestion occurs because the switches in a network have a limited buffer size to store arrived packets.