Magnification factor is the ratio of the maximum displacement due to forced vibrations to the deflection due to _______ a) Static force b) Dynamic force c) Torsion d) Compression

Magnification factor is the ratio of the maximum displacement due to forced
vibrations to the deflection due to _______
a) Static force
b) Dynamic force
c) Torsion
d) Compression
by

1 Answer

Answer :

a) Static force
by

Related questions

Magnification factor is the ratio of the maximum displacement due to forced vibrations to the deflection due to _______ A Static force B Dynamic force C Torsion D Compression

Description : Magnification factor is the ratio of the maximum displacement due to forced vibrations to the deflection due to _______ A Static force B Dynamic force C Torsion D Compression

Last Answer : A Static force

The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as A Damping factor B Damping coefficient C Logarithmic decrement D Magnification factor

Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as A Damping factor B Damping coefficient C Logarithmic decrement D Magnification factor

Last Answer : D Magnification factor

The ratio of the maximum displacement of the forced vibration to the deflection due to the static force is known as A Logarithmic decrement B Magnification factor C Damping factor D None of the mentioned

Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force is known as A Logarithmic decrement B Magnification factor C Damping factor D None of the mentioned

Last Answer : B Magnification factor

The ratio of maximum displacement of the forced vibration to the deflection due to the static force, is known as A. Damping FactorB. Damping Coefficient C. Logarithmic Decrement D. Magnification Factor

Description : The ratio of maximum displacement of the forced vibration to the deflection due to the static force, is known as A. Damping FactorB. Damping Coefficient C. Logarithmic Decrement D. Magnification Factor

Last Answer : D. Magnification Factor

The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as a) Damping factor b) Damping coefficient c) Logarithmic decrement d) Magnification factor

Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as a) Damping factor b) Damping coefficient c) Logarithmic decrement d) Magnification factor

Last Answer : d) Magnification factor

The ratio of the maximum displacement of the forced vibration to the deflection due to the static force is known as (A) damping factor (B) damping coefficient (C) logarithmic decrement (D) magnification factor

Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force is known as (A) damping factor (B) damping coefficient (C) logarithmic decrement (D) magnification factor

Last Answer : (D) magnification factor

The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as a) damping factor b) damping coefficient c) logarithmic decrement d) magnification factor

Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as a) damping factor b) damping coefficient c) logarithmic decrement d) magnification factor

Last Answer : d) magnification factor

Maximum displacement due to forced vibration is dependent on deflection due to static force. a) True b) False

Description : Maximum displacement due to forced vibration is dependent on deflection due to static force. a) True b) False

Last Answer : a) True

Maximum displacement due to forced vibration is ____________ the displacement due to static force. (A) inversely proportional to (B) directly proportional to (C) independent of (D) none of the above

Description : Maximum displacement due to forced vibration is ____________ the displacement due to static force. (A) inversely proportional to (B) directly proportional to (C) independent of (D) none of the above

Last Answer : (B) directly proportional to

The ratio of maximum displacement of the forced vibration to the deflection due to static force is known as :

Description : The ratio of maximum displacement of the forced vibration to the deflection due to static force is known as : (A) Damping Factor (B) Damping Coefficient (C) Logarithmic Decrement (D) Magnification Factor

Last Answer : Magnification Factor

A weight of 50 N is suspended from a spring of stiffness 4000N/m and subjected to a harmonic force of magnitude 60N and frequency 60 Hz. what will be the static displacement of the spring due to maximum applied force A. 0.015m B. 0.15 m C. 15 m D. 150m

Description : A weight of 50 N is suspended from a spring of stiffness 4000N/m and subjected to a harmonic force of magnitude 60N and frequency 60 Hz. what will be the static displacement of the spring due to maximum applied force A. 0.015m B. 0.15 m C. 15 m D. 150m

Last Answer : B. 0.15 m

Transmissibility in a force excitation system is defined by the ratio of the A) Maximum excitation force to the force transmitted to the foundation B) Force transmitted to the foundation, to the maximum excitation force C) Maximum static deflection of the ass to the deflection of the foundation D) None of the above

Description : Transmissibility in a force excitation system is defined by the ratio of the A) Maximum excitation force to the force transmitted to the foundation B) Force transmitted to the foundation, to the maximum ... Maximum static deflection of the ass to the deflection of the foundation D) None of the above

Last Answer : B) Force transmitted to the foundation, to the maximum excitation force

Calculate the static deflection in μm of transverse vibrations if the frequency is 200Hz. A. 6.21 B. 0.621 C. 62.1 D. 0.006

Description : Calculate the static deflection in μm of transverse vibrations if the frequency is 200Hz. A. 6.21 B. 0.621 C. 62.1 D. 0.006

Last Answer : A. 6.21

Calculate the static deflection in μm of transverse vibrations if the frequency is 200Hz. a) 6 b) 0.6 c) 60 d) 0.006

Description : Calculate the static deflection in μm of transverse vibrations if the frequency is 200Hz. a) 6 b) 0.6 c) 60 d) 0.006

Last Answer : a) 6

Calculate the natural frequency of transverse vibrations if the static deflection is 0.01mm. a) 157.6 b) 144.8 c) 173.2 d) 154.1

Description : Calculate the natural frequency of transverse vibrations if the static deflection is 0.01mm. a) 157.6 b) 144.8 c) 173.2 d) 154.1

Last Answer : a) 157.6

_______ torsional vibrations will occur in a two-rotor system only if both rotors have the same frequency. (A) Free (B) Forced (C) Unbalanced (D) None of the above

Description : _______ torsional vibrations will occur in a two-rotor system only if both rotors have the same frequency. (A) Free (B) Forced (C) Unbalanced (D) None of the above

Last Answer : (A) Free

A single degree of freedom spring-mass system is subjected to a harmonic force of constant amplitude. For an excitation frequency of √3k/m , the ratio of the amplitude of steady state response to the static deflection of the spring is __________ A. 0.2 B. 0.5 C. 0.8 D. None of the above

Description : A single degree of freedom spring-mass system is subjected to a harmonic force of constant amplitude. For an excitation frequency of √3k/m , the ratio of the amplitude of steady state response to the static deflection of the spring is __________ A. 0.2 B. 0.5 C. 0.8 D. None of the above

Last Answer : B. 0.5

When the body vibrates under the influence of external force, then the body is said to be under ___________ . * 1 point (A) free vibrations (B) natural vibrations (C) forced vibrations (D) damped vibrations

Description : When the body vibrates under the influence of external force, then the body is said to be under ___________ . * 1 point (A) free vibrations (B) natural vibrations (C) forced vibrations (D) damped vibrations

Last Answer : (C) forced vibrations

When no external force is acting on the vibrating body, the vibrations are said to be A. Free Vibrations B. Forced Vibrations C. Loaded Vibrations D. Undamped Vibrations

Description : When no external force is acting on the vibrating body, the vibrations are said to be A. Free Vibrations B. Forced Vibrations C. Loaded Vibrations D. Undamped Vibrations

Last Answer : A. Free Vibrations

When the external force is acting on the vibrating body, the vibrations are said to be A. Natural Vibrations B. Forced Vibrations C. Loaded Vibrations D. Undamped Vibrations

Description : When the external force is acting on the vibrating body, the vibrations are said to be A. Natural Vibrations B. Forced Vibrations C. Loaded Vibrations D. Undamped Vibrations

Last Answer : B. Forced Vibrations

The ratio of actual damping coefficient to the critical damping coefficient is known as A Magnification Factor B Damping Factor C Logarithmic decrementD None of the mentioned

Description : The ratio of actual damping coefficient to the critical damping coefficient is known as A Magnification Factor B Damping Factor C Logarithmic decrementD None of the mentioned

Last Answer : B Damping Factor

Transmissibility in a support excitation system is defined by A) Ratio of absolute amplitude of the mass to the excitation amplitude of the support B) Reciprocal of (a) C) Ratio of the force transmitted to the foundation, to the equivalent force corresponding to maximum displacement excitation D) None of the above

Description : Transmissibility in a support excitation system is defined by A) Ratio of absolute amplitude of the mass to the excitation amplitude of the support B) Reciprocal of (a) C) Ratio of the ... the foundation, to the equivalent force corresponding to maximum displacement excitation D) None of the above

Last Answer : B) Reciprocal of (a)

f the mass is of 10 Kg, find the natural frequency in Hz of the free longitudinal vibrations. The displacement is 0.01mm. a) 44.14 b) 49.85 c) 43.43 d) 46.34

Description : f the mass is of 10 Kg, find the natural frequency in Hz of the free longitudinal vibrations. The displacement is 0.01mm. a) 44.14 b) 49.85 c) 43.43 d) 46.34

Last Answer : b) 49.85

Find the displacement in mm of the free longitudinal vibrations if the Natural frequency is 20 Hz. a) 0.1 b) 0.2 c) 0.5 d) 0.6

Description : Find the displacement in mm of the free longitudinal vibrations if the Natural frequency is 20 Hz. a) 0.1 b) 0.2 c) 0.5 d) 0.6

Last Answer : d) 0.6

Find the displacement in mm of the free longitudinal vibrations if the Natural frequency is 15 Hz. a) 1.1 b) 1.2 c) 1.5 d) 1.6

Description : Find the displacement in mm of the free longitudinal vibrations if the Natural frequency is 15 Hz. a) 1.1 b) 1.2 c) 1.5 d) 1.6

Last Answer : a) 1.1

Find the natural frequency in Hz of the free longitudinal vibrations if the displacement is 2mm. a) 11.14 b) 12.38 c) 11.43 d) 11.34

Description : Find the natural frequency in Hz of the free longitudinal vibrations if the displacement is 2mm. a) 11.14 b) 12.38 c) 11.43 d) 11.34

Last Answer : a) 11.14

The static deflection of a spring under gravity, when a mass of 1 kg is suspended from it, is 1 mm. Assume the acceleration due to gravity g = 10 m/s^2. The natural frequency of this spring-mass system (in rad/s) is A 100 B 150 C 200 D 250

Description : The static deflection of a spring under gravity, when a mass of 1 kg is suspended from it, is 1 mm. Assume the acceleration due to gravity g = 10 m/s^2. The natural frequency of this spring-mass system (in rad/s) is A 100 B 150 C 200 D 250

Last Answer : A 100

In steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. A equal to B directly proportional to C inversely proportional to D independent of

Description : In steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. A equal to B directly proportional to C inversely proportional to D independent of

Last Answer : C inversely proportional to

In steady state forced vibrations, the amplitude of vibrations at resonance is __________ damping coefficient. A. Equal to B. Directly proportional to C. Inversely proportional toD. Independent of

Description : In steady state forced vibrations, the amplitude of vibrations at resonance is __________ damping coefficient. A. Equal to B. Directly proportional to C. Inversely proportional toD. Independent of

Last Answer : C. Inversely proportional to

n steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. a) equal to b) directly proportional to c) inversely proportional to d) independent of

Description : n steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. a) equal to b) directly proportional to c) inversely proportional to d) independent of

Last Answer : c) inversely proportional to

In steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. (A) equal to (B) directly proportional to (C) inversely proportional to (D) independent of

Description : In steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. (A) equal to (B) directly proportional to (C) inversely proportional to (D) independent of

Last Answer : (C) inversely proportional to

In steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. a) equal to b) directly proportional toc) inversely proportional to d) independent of

Description : In steady state forced vibrations, the amplitude of vibrations at resonance is _____________ damping coefficient. a) equal to b) directly proportional toc) inversely proportional to d) independent of

Last Answer : c) inversely proportional to

What are deterministic vibrations? * (A)Vibrations caused due to known exciting force (B)Vibrations caused due to unknown exciting force (c) Vibrations which are aperiodic in nature (D) None of the above

Description : What are deterministic vibrations? * (A)Vibrations caused due to known exciting force (B)Vibrations caused due to unknown exciting force (c) Vibrations which are aperiodic in nature (D) None of the above

Last Answer : (A)Vibrations caused due to known exciting force

Deterministic vibrations are A Vibrations caused due to unknown exciting force B Vibrations caused due to known exciting force C Vibrations which are aperiodic in nature D None of the mentioned

Description : Deterministic vibrations are A Vibrations caused due to unknown exciting force B Vibrations caused due to known exciting force C Vibrations which are aperiodic in nature D None of the mentioned

Last Answer : B Vibrations caused due to known exciting force

What are deterministic vibrations? a. Vibrations caused due to known exciting force b. Vibrations caused due to unknown exciting force c. Vibrations which are aperiodic in nature d. None of the above

Description : What are deterministic vibrations? a. Vibrations caused due to known exciting force b. Vibrations caused due to unknown exciting force c. Vibrations which are aperiodic in nature d. None of the above

Last Answer : a. Vibrations caused due to known exciting force

Transmissibility is the ratio of a. force transmitted and exciting force b. force applied and the resulting displacement c. input displacement and output displacement

Description : Transmissibility is the ratio of a. force transmitted and exciting force b. force applied and the resulting displacement c. input displacement and output displacement

Last Answer : a. force transmitted and exciting force

A cantilever shaft having 50 mm diameter and a length of 300mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m^2. Determine the static deflection of shaft in mm. A 0.144 B 0.244 C 0.344 D 0.444

Description : A cantilever shaft having 50 mm diameter and a length of 300mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m^2. Determine the static deflection of shaft in mm. A 0.144 B 0.244 C 0.344 D 0.444

Last Answer : A 0.144

A mass of 10 kg when suspended from a spring causes a static deflection of 0.01m. Find the spring stiffness for the same system. A 9810 N/m B 8910 N/m C 1098 N/m D 9801 N/m

Description : A mass of 10 kg when suspended from a spring causes a static deflection of 0.01m. Find the spring stiffness for the same system. A 9810 N/m B 8910 N/m C 1098 N/m D 9801 N/m

Last Answer : A 9810 N/m

Which among the following is the value of static deflection (δ) for a fixed beam with central point load? A ( Wl 3 ) /(192 EI) B ( Wl 2 ) /(192 EI) C (Wl 3 ) /(384 EI) D None of the above

Description : Which among the following is the value of static deflection (δ) for a fixed beam with central point load? A ( Wl 3 ) /(192 EI) B ( Wl 2 ) /(192 EI) C (Wl 3 ) /(384 EI) D None of the above

Last Answer : A ( Wl 3 ) /(192 EI)

From above numerical find the static deflection A 0.0245 mm B 0.0025 mm C 0.0245 m D 0.0245 cm

Description : From above numerical find the static deflection A 0.0245 mm B 0.0025 mm C 0.0245 m D 0.0245 cm

Last Answer : C 0.0245 m

A mass of 10 kg when suspended from a spring causes a static deflection of 0.01m. Find the spring stiffness for the same system. A 9810 N/m B 8910 N/m C 1098 N/m D 9801 N/m

Description : A mass of 10 kg when suspended from a spring causes a static deflection of 0.01m. Find the spring stiffness for the same system. A 9810 N/m B 8910 N/m C 1098 N/m D 9801 N/m

Last Answer : D 9801 N/m

If the static deflection is 1.665×10 -3 m, calculate the critical speed of the shaft in rps. Centre of disc at 0.25m away from centre of axis of shaft. A. 8.64 B. 9.64 C. 10.64 D. 12.2

Description : If the static deflection is 1.665×10 -3 m, calculate the critical speed of the shaft in rps. Centre of disc at 0.25m away from centre of axis of shaft. A. 8.64 B. 9.64 C. 10.64 D. 12.2

Last Answer : D. 12.2

Calculate coefficient of viscous damper, if the system is critically damped. Consider the following data: 1. Mass of spring mass damper system = 350 kg 2. Static deflection = 2 x 10 –3 m 3. Natural frequency of the system = 60 rad/sec A. 100.5 x 10 3 N-s/m B. 80 x 10 3 N-s/m C. 42 x 10 3 N-s/m D. None of the above

Description : Calculate coefficient of viscous damper, if the system is critically damped. Consider the following data: 1. Mass of spring mass damper system = 350 kg 2. Static deflection = 2 x 10 -3 m 3. Natural frequency of the system = 60 rad/sec ... /m B. 80 x 10 3 N-s/m C. 42 x 10 3 N-s/m D. None of the above

Last Answer : C. 42 x 10 3 N-s/m

A mass of 10 kg when suspended from a spring causes a static deflection of A 0.01m. Find the spring stiffness for the same system. (A) 9810 N/m (B) 8910 N/m (C)1098 N/m (D) 9801 N/m

Description : A mass of 10 kg when suspended from a spring causes a static deflection of A 0.01m. Find the spring stiffness for the same system. (A) 9810 N/m (B) 8910 N/m (C)1098 N/m (D) 9801 N/m

Last Answer : A) 9810 N/m

Which among the following is the value of static deflection (δ) for a fixed beam with central point load? a. (Wl 3 ) /(192 EI) b. (Wl 2 ) /(192 EI) c. (Wl 3 ) /(384 EI)

Description : Which among the following is the value of static deflection (δ) for a fixed beam with central point load? a. (Wl 3 ) /(192 EI) b. (Wl 2 ) /(192 EI) c. (Wl 3 ) /(384 EI)

Last Answer : a. (Wl 3 ) /(192 EI)

Calculate coefficient of viscous damper, if the system is critically damped. Consider the following data: 1. Mass of spring mass damper system = 350 kg 2. Static deflection = 2 x 10 –3 m 3. Natural frequency of the system = 60 rad/sec a. 100.5 x 10 3 N-s/m b. 80 x 10 3 N-s/m c. 42 x 10 3 N-s/m d. None of the above

Description : Calculate coefficient of viscous damper, if the system is critically damped. Consider the following data: 1. Mass of spring mass damper system = 350 kg 2. Static deflection = 2 x 10 -3 m 3. Natural frequency of the system = 60 rad/sec ... /m b. 80 x 10 3 N-s/m c. 42 x 10 3 N-s/m d. None of the above

Last Answer : c. 42 x 10 3 N-s/m

A cantilever shaft having 50 mm diameter and a length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 3 . Determine the static deflection of the shaft in mm. a) 0.147 b) 0.213 c) 0.132 d) 0.112

Description : A cantilever shaft having 50 mm diameter and a length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 3 . Determine the static deflection of the shaft in mm. a) 0.147 b) 0.213 c) 0.132 d) 0.112

Last Answer : a) 0.147

Static deflection and frequency are independent of each other. a) True b) False

Description : Static deflection and frequency are independent of each other. a) True b) False

Last Answer : b) False