The angle between spring force and damping force is A 180 0 B 120 0 C 90 0 D 0 0

The angle between spring force and damping force is
A 180 0
B 120 0
C 90 0
D 0 0
by

1 Answer

Answer :

C 90 0
by

Related questions

The angle between spring force and damping force is A. 180 0 B. 90 0 C. 0 0 D. None of the above

Description : The angle between spring force and damping force is A. 180 0 B. 90 0 C. 0 0 D. None of the above

Last Answer : B. 90 0

At resonance the phase angle is equal to A 0 0B 180 0 C 120 0 D 90 0

Description : At resonance the phase angle is equal to A 0 0B 180 0 C 120 0 D 90 0

Last Answer : D 90 0

Calculate damped natural frequency, if a spring mass damper system is subjected to periodic disturbing force of 30 N. Damping coefficient is equal to 0.76 times of critical damping coefficient and undamped natural frequency is 5 rad/sec A. 3.99 rad/sec B. 2.13 rad/sec C. 4.12 rad/sec D. 3.24 rad/sec

Description : Calculate damped natural frequency, if a spring mass damper system is subjected to periodic disturbing force of 30 N. Damping coefficient is equal to 0.76 times of critical damping coefficient and undamped natural frequency is 5 rad/sec A. 3.99 rad/sec B. 2.13 rad/sec C. 4.12 rad/sec D. 3.24 rad/sec

Last Answer : D. 3.24 rad/sec

In a spring-mass system, which of the following force is not considered? A Spring force B Damping force C Accelerating force D A and B

Description : In a spring-mass system, which of the following force is not considered? A Spring force B Damping force C Accelerating force D A and B

Last Answer : B Damping force

Which of the following is true regarding Ɛ>1? A. Transmitted force is greater than applied force B. Transmitted force is less than applied force C. Spring force is less than applied force D. Damping force is less than applied force

Description : Which of the following is true regarding Ɛ>1? A. Transmitted force is greater than applied force B. Transmitted force is less than applied force C. Spring force is less than applied force D. Damping force is less than applied force

Last Answer : A. Transmitted force is greater than applied force

In a spring-mass system, which of the following force is not considered? B ( A ) Spring force ( B ) Damping force ( C ) Accelerating force ( D ) A and B

Description : In a spring-mass system, which of the following force is not considered? B ( A ) Spring force ( B ) Damping force ( C ) Accelerating force ( D ) A and B

Last Answer : B ) Damping force

Which of the following is true regarding Ɛ>1? a) Transmitted force is greater than applied force b) Transmitted force is less than applied force c) Spring force is less than applied force d) Damping force is less than applied forc

Description : Which of the following is true regarding Ɛ>1? a) Transmitted force is greater than applied force b) Transmitted force is less than applied force c) Spring force is less than applied force d) Damping force is less than applied forc

Last Answer : a) Transmitted force is greater than applied force

A vehicle suspension system consists of a spring and a damper. Stiffness of spring is 3.5 KN/m and damping constant of damper is 400Ns/m. If mass is 50 kg, then damping factor is A 0.606 B 0.10 C 0.666 D 0.471

Description : A vehicle suspension system consists of a spring and a damper. Stiffness of spring is 3.5 KN/m and damping constant of damper is 400Ns/m. If mass is 50 kg, then damping factor is A 0.606 B 0.10 C 0.666 D 0.471

Last Answer : D 0.471

A vibrating system having mass 1kg, a spring of stiffness 1000N/m and damping factor of 0.632 and it is put to harmonic excitation of 10N. Find the amplitude at resonance. A 0.079 B 7.9C 0.056 D 0.00791

Description : A vibrating system having mass 1kg, a spring of stiffness 1000N/m and damping factor of 0.632 and it is put to harmonic excitation of 10N. Find the amplitude at resonance. A 0.079 B 7.9C 0.056 D 0.00791

Last Answer : D 0.00791

A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural frequency (f n ), respectively, are a) 0.471 and 1.19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz

Description : A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural ... , are a) 0.471 and 1.19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz

Last Answer : a) 0.471 and 1.19 Hz

A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural frequency (f n ), respectively, are a) 0.471 and 1.19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz d) 0.666 and 8.50 Hz

Description : A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural ... .19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz d) 0.666 and 8.50 Hz

Last Answer : a) 0.471 and 1.19 Hz

The velocity vector in a vector diagram for a harmonic motion A Lags the displacement vector by 180 0 B Lags the displacement vector by 90 0 C Leads the displacement vector by 90 0 D Leads the displacement vector by 180 0

Description : The velocity vector in a vector diagram for a harmonic motion A Lags the displacement vector by 180 0 B Lags the displacement vector by 90 0 C Leads the displacement vector by 90 0 D Leads the displacement vector by 180 0

Last Answer : C Leads the displacement vector by 90 0

The velocity vector in a vector diagram for a harmonic motion A Lags the displacement vector by 180 0 B Lags the displacement vector by 90 0 C Leads the displacement vector by 90 0 D Leads the displacement vector by 180 0

Description : The velocity vector in a vector diagram for a harmonic motion A Lags the displacement vector by 180 0 B Lags the displacement vector by 90 0 C Leads the displacement vector by 90 0 D Leads the displacement vector by 180 0

Last Answer : C Leads the displacement vector by 90 0

The velocity vector in a vector diagram for a harmonic motion C (A) Lags the displacement vector by 180 0 (B) Lags the displacement vector by 90 0 (C) Leads the displacement vector by 90 0 (D) Leads the displacement vector by 180 0

Description : The velocity vector in a vector diagram for a harmonic motion C (A) Lags the displacement vector by 180 0 (B) Lags the displacement vector by 90 0 (C) Leads the displacement vector by 90 0 (D) Leads the displacement vector by 180 0

Last Answer : (C) Leads the displacement vector by 90 0

At which frequency ratio, phase angle increases as damping factor increases? A. When frequency ratio is less than unity B. When frequency ratio is more than unity C. When frequency ratio is zero D. All of the above

Description : At which frequency ratio, phase angle increases as damping factor increases? A. When frequency ratio is less than unity B. When frequency ratio is more than unity C. When frequency ratio is zero D. All of the above

Last Answer : A. When frequency ratio is less than unity

Which of the following is a type of transmitted force to the foundation? (A) Damping force (B) Undamping force (C) Tensile force (D) Torsional force

Description : Which of the following is a type of transmitted force to the foundation? (A) Damping force (B) Undamping force (C) Tensile force (D) Torsional force

Last Answer : (A) Damping force

The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as A Damping factor B Damping coefficient C Logarithmic decrement D Magnification factor

Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as A Damping factor B Damping coefficient C Logarithmic decrement D Magnification factor

Last Answer : D Magnification factor

The ratio of the maximum displacement of the forced vibration to the deflection due to the static force is known as A Logarithmic decrement B Magnification factor C Damping factor D None of the mentioned

Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force is known as A Logarithmic decrement B Magnification factor C Damping factor D None of the mentioned

Last Answer : B Magnification factor

Which of the following relations is true for viscous damping? A) Force α relative displacement B) Force α relative velocity C) Force α (1 / relative velocity) D) None of the above

Description : Which of the following relations is true for viscous damping? A) Force α relative displacement B) Force α relative velocity C) Force α (1 / relative velocity) D) None of the above

Last Answer : B) Force α relative velocity

The ratio of maximum displacement of the forced vibration to the deflection due to the static force, is known as A. Damping FactorB. Damping Coefficient C. Logarithmic Decrement D. Magnification Factor

Description : The ratio of maximum displacement of the forced vibration to the deflection due to the static force, is known as A. Damping FactorB. Damping Coefficient C. Logarithmic Decrement D. Magnification Factor

Last Answer : D. Magnification Factor

The damping is used to control the __________ of body. A. Force B. Viscosity C. Motion D. None

Description : The damping is used to control the __________ of body. A. Force B. Viscosity C. Motion D. None

Last Answer : C. Motion

Which of the following relations is true for viscous damping? a. Force α relative displacement b. Force α relative velocity c. Force α (1 / relative velocity) d. None of the above

Description : Which of the following relations is true for viscous damping? a. Force α relative displacement b. Force α relative velocity c. Force α (1 / relative velocity) d. None of the above

Last Answer : b. Force α relative velocity

Which of the following statements is/are true for coulomb damping? 1. Coulomb damping occurs due to friction between two lubricated surfaces2. Damping force is opposite to the direction of motion of vibrating body 3. For smooth surfaces, coefficient of friction depends upon velocity 4. Damping force depends upon the rubbing velocity between two rubbing surfaces a. Only statement 1 b. Statement 2, 3 and statement 4 c. Only statement 2 d. All the above statements are true

Description : Which of the following statements is/are true for coulomb damping? 1. Coulomb damping occurs due to friction between two lubricated surfaces2. Damping force is opposite to the direction of motion of vibrating body ... 2, 3 and statement 4 c. Only statement 2 d. All the above statements are true

Last Answer : c. Only statement 2

The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as a) Damping factor b) Damping coefficient c) Logarithmic decrement d) Magnification factor

Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as a) Damping factor b) Damping coefficient c) Logarithmic decrement d) Magnification factor

Last Answer : d) Magnification factor

Reduction in vibration amplitude after one complete cycle of single degree free vibration with dry friction damping is_____, if where F"= frictional force between mass and surface and k =stiffness of the system. a)4F/k a b) 2f/K C) 3F/k D)8F/k

Description : Reduction in vibration amplitude after one complete cycle of single degree free vibration with dry friction damping is_____, if where F"= frictional force between mass and surface and k =stiffness of the system. a)4F/k a b) 2f/K C) 3F/k D)8F/k

Last Answer : a)4F/k

Which of the following is a type of transmitted force to the foundation? (A) Damping force (B) Undamping force (C) Tensile force (D) Torsional force

Description : Which of the following is a type of transmitted force to the foundation? (A) Damping force (B) Undamping force (C) Tensile force (D) Torsional force

Last Answer : (A) Damping force

The ratio of the maximum displacement of the forced vibration to the deflection due to the static force is known as (A) damping factor (B) damping coefficient (C) logarithmic decrement (D) magnification factor

Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force is known as (A) damping factor (B) damping coefficient (C) logarithmic decrement (D) magnification factor

Last Answer : (D) magnification factor

Which of the following is a type of transmitted force to the foundation? a) Damping force b) Undamping force c) Tensile force d) Torsional force

Description : Which of the following is a type of transmitted force to the foundation? a) Damping force b) Undamping force c) Tensile force d) Torsional force

Last Answer : a) Damping force

In which direction does the damping force acts? a) Opposite to the motion b) Along the motion c) Perpendicular to motion d) Variable

Description : In which direction does the damping force acts? a) Opposite to the motion b) Along the motion c) Perpendicular to motion d) Variable

Last Answer : a) Opposite to the motion

The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as a) damping factor b) damping coefficient c) logarithmic decrement d) magnification factor

Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as a) damping factor b) damping coefficient c) logarithmic decrement d) magnification factor

Last Answer : d) magnification factor

A weight of 50 N is suspended from a spring of stiffness 4000N/m and subjected to a harmonic force of magnitude 60N and frequency 60 Hz. what will be the static displacement of the spring due to maximum applied force A. 0.015m B. 0.15 m C. 15 m D. 150m

Description : A weight of 50 N is suspended from a spring of stiffness 4000N/m and subjected to a harmonic force of magnitude 60N and frequency 60 Hz. what will be the static displacement of the spring due to maximum applied force A. 0.015m B. 0.15 m C. 15 m D. 150m

Last Answer : B. 0.15 m

A single degree of freedom spring-mass system is subjected to a harmonic force of constant amplitude. For an excitation frequency of √3k/m , the ratio of the amplitude of steady state response to the static deflection of the spring is __________ A. 0.2 B. 0.5 C. 0.8 D. None of the above

Description : A single degree of freedom spring-mass system is subjected to a harmonic force of constant amplitude. For an excitation frequency of √3k/m , the ratio of the amplitude of steady state response to the static deflection of the spring is __________ A. 0.2 B. 0.5 C. 0.8 D. None of the above

Last Answer : B. 0.5

A simple pendulum is found to vibrate at a frequency of 0.5Hz in vacuum and0.45 Hz in a viscous fluid medium. Find the damping factor. 0.5122 (B) 0.9272 (C) 0.4359 (D) 0.2568

Description : A simple pendulum is found to vibrate at a frequency of 0.5Hz in vacuum and0.45 Hz in a viscous fluid medium. Find the damping factor. 0.5122 (B) 0.9272 (C) 0.4359 (D) 0.2568

Last Answer : (C) 0.4359

Calculate logarithmic decrement if damping factor is 0.33. A 1.36 B 3.23 C 5.16D 2.19

Description : Calculate logarithmic decrement if damping factor is 0.33. A 1.36 B 3.23 C 5.16D 2.19

Last Answer : D 2.19

Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 25.62 rad/sec B 20.78 rad/sec C 14.4 rad/sec D 15.33 rad/sec

Description : Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 25.62 rad/sec B 20.78 rad/sec C 14.4 rad/sec D 15.33 rad/sec

Last Answer : A 25.62 rad/sec

Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 21 rad/sec B 25.62 rad/sec C 20.22 Hz D 3.15 Hz

Description : Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 21 rad/sec B 25.62 rad/sec C 20.22 Hz D 3.15 Hz

Last Answer : B 25.62 rad/sec

A simple pendulum is found to vibrate at a frequency of 0.5Hz in vacuum and 0.45Hz in a viscous fluid medium. Find the damping factor. A 0.5122 B 0.9237 C 0.4359 D 0.2568

Description : A simple pendulum is found to vibrate at a frequency of 0.5Hz in vacuum and 0.45Hz in a viscous fluid medium. Find the damping factor. A 0.5122 B 0.9237 C 0.4359 D 0.2568

Last Answer : C 0.4359

Determine the viscous damping coefficient if damper offers resistance 0.05N at constant velocity 0.04m/sec A 0.8N-sec/m B 1.5N-sec/m C 2.5N-sec/m D 1.25N-sec/m

Description : Determine the viscous damping coefficient if damper offers resistance 0.05N at constant velocity 0.04m/sec A 0.8N-sec/m B 1.5N-sec/m C 2.5N-sec/m D 1.25N-sec/m

Last Answer : D 1.25N-sec/m

Calculate logarithmic decrement if damping factor is 0.086 A 0.245 B 0.425 C 0.542 D 0.252

Description : Calculate logarithmic decrement if damping factor is 0.086 A 0.245 B 0.425 C 0.542 D 0.252

Last Answer : C 0.542

Calculate damping ratio if mass = 200Kg, ω = 20rad/s and damping coefficient = 800 N/m/s A. 0.03 B. 0.04 C. 0.05 D. 0.06

Description : Calculate damping ratio if mass = 200Kg, ω = 20rad/s and damping coefficient = 800 N/m/s A. 0.03 B. 0.04 C. 0.05 D. 0.06

Last Answer : A. 0.03

The equation of motion for a vibrating system with viscous damping is d 2 x/dt 2 + c/m X dx/dt + s/m X x = 0 If the roots of this equation are real, then the system will be A. over damped B. under damped C. critically damped D. none of the mentioned

Description : The equation of motion for a vibrating system with viscous damping is d 2 x/dt 2 + c/m X dx/dt + s/m X x = 0 If the roots of this equation are real, then the system will be A. over damped B. under damped C. critically damped D. none of the mentioned

Last Answer : A. over damped

Calculate logarithmic decrement if damping factor is 0.33. D ( A ) 1.36 ( B ) 3.23 ( C ) 5.16 ( D ) 2.19

Description : Calculate logarithmic decrement if damping factor is 0.33. D ( A ) 1.36 ( B ) 3.23 ( C ) 5.16 ( D ) 2.19

Last Answer : D ) 2.19

Calculate natural frequency of damped vibration, if damping factor is 0.52 and A natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. ( A )25.62 rad/sec ( B )20.78 rad/sec ( C )14.4 rad/sec ( D )15.33 rad/sec

Description : Calculate natural frequency of damped vibration, if damping factor is 0.52 and A natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. ( A )25.62 rad/sec ( B )20.78 rad/sec ( C )14.4 rad/sec ( D )15.33 rad/sec

Last Answer : ( A )25.62 rad/sec

Calculate logarithmic decrement if damping factor is 0.33. a. 1.36 b. 3.23 c. 5.16 d. 2.19

Description : Calculate logarithmic decrement if damping factor is 0.33. a. 1.36 b. 3.23 c. 5.16 d. 2.19

Last Answer : d. 2.19

Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequ the system is 30 rad/sec which consists of machine supported on springs and dashpots. a. 25.62 rad/secb. 20.78 rad/sec c. 14.4 rad/sec d. 15.33 rad/sec

Description : Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequ the system is 30 rad/sec which consists of machine supported on springs and dashpots. a. 25.62 rad/secb. 20.78 rad/sec c. 14.4 rad/sec d. 15.33 rad/sec

Last Answer : a. 25.62 rad/sec

find the value of logarithmic decrement of a vibratory system if its natural frequency is 10rad/sec, its mass is 10kg and its damping constant is 100N.s/m a) 36.27 b)362.7 c)0.3627 d)3.627

Description : find the value of logarithmic decrement of a vibratory system if its natural frequency is 10rad/sec, its mass is 10kg and its damping constant is 100N.s/m a) 36.27 b)362.7 c)0.3627 d)3.627

Last Answer : d)3.627

In which of the cases the factor c = 0? a) When there is damping b) No damping c) Resonance d) c is never 0

Description : In which of the cases the factor c = 0? a) When there is damping b) No damping c) Resonance d) c is never 0

Last Answer : b) No damping

Calculate damping ratio from the following data: mass = 200Kg ω = 20rad/s damping coefficient = 1000 N/m/s a) 0.03 b) 0.04 c) 0.05 d) 0.06

Description : Calculate damping ratio from the following data: mass = 200Kg ω = 20rad/s damping coefficient = 1000 N/m/s a) 0.03 b) 0.04 c) 0.05 d) 0.06

Last Answer : b) 0.04

Calculate damping ratio from the following data: mass = 200Kg ω = 20rad/s damping coefficient = 800 N/m/s a) 0.03 b) 0.04 c) 0.05 d) 0.06

Description : Calculate damping ratio from the following data: mass = 200Kg ω = 20rad/s damping coefficient = 800 N/m/s a) 0.03 b) 0.04 c) 0.05 d) 0.06

Last Answer : a) 0.03