Equilibrium Method is in accordance with which of the following principle? * 1 point (A) Taylor's principle (B) D'Alembert's principle (C) Energy conservation principle (D) None of the above

Equilibrium Method is in accordance with which of the following principle? *
1 point
(A) Taylor's principle
(B) D'Alembert's principle
(C) Energy conservation principle
(D) None of the above
by

1 Answer

Answer :

(B) D'Alembert's principle
by

Related questions

Equilibrium Method is in accordance with which of the following principle? A. Taylor's principle B. D'Alembert's principle C. Energy conservation principle D. None of the above

Description : Equilibrium Method is in accordance with which of the following principle? A. Taylor's principle B. D'Alembert's principle C. Energy conservation principle D. None of the above

Last Answer : B. D'Alembert's principle

Equilibrium Method is in accordance with which of the following principle? (A) Taylor's principle (B) D'Alembert's principle (C) Energy conservation principle (D) None of the above

Description : Equilibrium Method is in accordance with which of the following principle? (A) Taylor's principle (B) D'Alembert's principle (C) Energy conservation principle (D) None of the above

Last Answer : (B) D'Alembert's principle

The statement ---- if three forces acting at a point are in equilibrium, each force is proportional to the sine of the angle between the other two ---- is known as a.Law of polygon of forces b.D'Alembert's principle c.Newtons law of forces d.Lami's theorem e.Law of triangle of forces

Description : The statement ---- if three forces acting at a point are in equilibrium, each force is proportional to the sine of the angle between the other two ---- is known as a.Law of polygon of forces b.D'Alembert's principle c.Newtons law of forces d.Lami's theorem e.Law of triangle of forces

Last Answer : d. Lami's theorem

According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? * 1 point (A) Energy method (B) Rayleigh's method (C) Equilibrium method (D) All of the above

Description : According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? * 1 point (A) Energy method (B) Rayleigh's method (C) Equilibrium method (D) All of the above

Last Answer : (B) Rayleigh's method

According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? A Energy method B Rayleigh’s method C Equilibrium method D All of the above

Description : According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? A Energy method B Rayleigh’s method C Equilibrium method D All of the above

Last Answer : B Rayleigh’s method

According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position A Energy method B Rayleigh's method C Equilibrium method D None of the mentioned

Description : According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position A Energy method B Rayleigh's method C Equilibrium method D None of the mentioned

Last Answer : B Rayleigh's method

According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? A. Energy method B. Rayleigh's method C. Equilibrium method D. All of the above

Description : According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? A. Energy method B. Rayleigh's method C. Equilibrium method D. All of the above

Last Answer : C. Equilibrium method

According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? A) Energy method B) Rayleigh's method C) Equilibrium method B) All of the above

Description : According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? A) Energy method B) Rayleigh's method C) Equilibrium method B) All of the above

Last Answer : B) Rayleigh's method

According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? A) Energy methodB) Rayleigh's method C) Equilibrium method D) All of the above

Description : According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? A) Energy methodB) Rayleigh's method C) Equilibrium method D) All of the above

Last Answer : B) Rayleigh's method

According to which method, maximum kinetic energy at mean position is equal to B maximum potential energy at extreme position? (A) Energy method (B) Rayleigh’s method (C) Equilibrium method (D) All of the above

Description : According to which method, maximum kinetic energy at mean position is equal to B maximum potential energy at extreme position? (A) Energy method (B) Rayleigh’s method (C) Equilibrium method (D) All of the above

Last Answer : (B) Rayleigh’s method

According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? a. Energy method b. Rayleigh's method c. Equilibrium method d. All of the above

Description : According to which method, maximum kinetic energy at mean position is equal to maximum potential energy at extreme position? a. Energy method b. Rayleigh's method c. Equilibrium method d. All of the above

Last Answer : b. Rayleigh's method

Which of the following methods will give an incorrect relation of the frequency for free vibration? a) Equilibrium method b) Energy method c) Reyleigh’s method d) Klein’s method

Description : Which of the following methods will give an incorrect relation of the frequency for free vibration? a) Equilibrium method b) Energy method c) Reyleigh’s method d) Klein’s method

Last Answer : d) Klein’s method

“Each point on a spherical wavefront may be considered a source of secondary spherical wavefronts”. This is known as the A. Snell’s law B. D’Alembert’s principle C. Appleton’s theory D. Huygen’s principle

Description : “Each point on a spherical wavefront may be considered a source of secondary spherical wavefronts”. This is known as the A. Snell’s law B. D’Alembert’s principle C. Appleton’s theory D. Huygen’s principle

Last Answer : D. Huygen’s principle

The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that A Its natural frequency is very low in comparison to the frequency of vibration B Its natural frequency is very high in comparison to the frequency of vibration C Its natural frequency is equal to the frequency of vibration D Measurement of vibratory motion is without any reference point

Description : The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that A Its natural frequency is very low in comparison to the frequency ... is equal to the frequency of vibration D Measurement of vibratory motion is without any reference point

Last Answer : C Its natural frequency is equal to the frequency of vibration

The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that a) its natural frequency is very low in comparison to the frequency of vibration b) its natural frequency is very high in comparison to the frequency of vibration c) its natural frequency is equal to the frequency of vibration d) measurement of vibratory motion is without any reference point

Description : The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that a) its natural frequency is very low in comparison to the frequency ... is equal to the frequency of vibration d) measurement of vibratory motion is without any reference point

Last Answer : c) its natural frequency is equal to the frequency of vibration

Lenz’s law is in accordance with the law of conservation of: a. momentum b. Angular momentum c. charge d. energy

Description : Lenz’s law is in accordance with the law of conservation of: a. momentum b. Angular momentum c. charge d. energy

Last Answer : a. momentum

The statement --- if forces acting on a point can be represented in magnitude and direction by the sides of a polygon taken in order then their resultant will be represented in magnitude and direction by the closing side of the polygon taken in opposite order ---- is known as a.Law of triangle of forces b.Newton's law of forces c.Law of polygon of forces d.D'Alembert's rule e.Lami's theorem

Description : The statement --- if forces acting on a point can be represented in magnitude and direction by the sides of a polygon taken in order then their resultant will be represented in magnitude and direction by the closing ... 's law of forces c.Law of polygon of forces d.D'Alembert's rule e.Lami's theorem

Last Answer : c. Law of polygon of forces

According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is critically damped? A x = (A + Bt) e – ωt B x = X e – ξωt (sin ω d t + Φ) C x = (A – Bt) e – ωt D x = X e – ξωt (cos ω d t + Φ)

Description : According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is ... Φ) C x = (A - Bt) e - ωt D x = X e - ξωt (cos ω d t + Φ)

Last Answer : A x = (A + Bt) e – ωt

According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is critically damped? A. x = (A + Bt) e – ωt B. x = X e – ξωt (sin ω d t + Φ) C. x = (A – Bt) e – ωt D. x = X e – ξωt (cos ω d t + Φ

Description : According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is ... ) C. x = (A - Bt) e - ωt D. x = X e - ξωt (cos ω d t + Φ

Last Answer : A. x = (A + Bt) e – ωt

According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the A differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is critically damped? ( A ) x = (A + Bt) e – ωt (B)x = X e – ξωt (sin ω d t + Φ) (C)x = (A – Bt) e – ωt ( D )x = X e – ξωt (cos ω d t + Φ

Description : According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the A differential equation for damped free vibrations having single degree of freedom. What will be the solution to this differential equation if the system is ... (C)x = (A - Bt) e - ωt ( D )x = X e - ξωt (cos ω d t + Φ

Last Answer : ( A ) x = (A + Bt) e – ωt

According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equati damped free vibrations having single degree of freedom. What will be the solution to this differ equation if the system is critically damped? a. x = (A + Bt) e – ωt b. x = X e – ξωt (sin ω d t + Φ) c. x = (A – Bt) e – ωt d. x = X e – ξωt (cos ω d t + Φ)

Description : According to D' Alembert's principle, m (d 2 x/ dt 2 ) + c (dx/dt) + Kx =0 is the differential equati damped free vibrations having single degree of freedom. What will be the solution to this differ equation if the system is critically ... c. x = (A - Bt) e - ωt d. x = X e - ξωt (cos ω d t + Φ)

Last Answer : a. x = (A + Bt) e – ωt

The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that ______. (A) its natural frequency is very low in comparison to the frequency of vibration (B) its natural frequency is very high in comparison to the frequency of vibration (C) its natural frequency is equal to the frequency of vibration (D) measurement of vibratory motion is without any reference poin

Description : The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that ______. (A) its natural frequency is very low in comparison to the ... is equal to the frequency of vibration (D) measurement of vibratory motion is without any reference poin

Last Answer : (C) its natural frequency is equal to the frequency of vibration

The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that a) its natural frequency is very low in comparison to the frequency of vibration b) its natural frequency is very high in comparison to the frequency of vibration c) its natural frequency is equal to the frequency of vibration d) measurement of vibratory motion is without any reference poin

Description : The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that a) its natural frequency is very low in comparison to the frequency ... is equal to the frequency of vibration d) measurement of vibratory motion is without any reference poin

Last Answer : c) its natural frequency is equal to the frequency of vibration

As per Energy Method, the summation of kinetic energy and potential energy must be ________ which is same at all the times. A zeroB minimum C maximum D constant

Description : As per Energy Method, the summation of kinetic energy and potential energy must be ________ which is same at all the times. A zeroB minimum C maximum D constant

Last Answer : D constant

In energy method for finding frequency of the system A The sum of kinetic and potential energy is constant B The sum of kinetic and potential energy is zero C Frequency cannot be determined by energy method D None of the mentioned

Description : In energy method for finding frequency of the system A The sum of kinetic and potential energy is constant B The sum of kinetic and potential energy is zero C Frequency cannot be determined by energy method D None of the mentioned

Last Answer : A The sum of kinetic and potential energy is constant

As per Energy Method, the summation of kinetic energy and potential energy must be ________ which is same at all the times. A. zero B. minimum C. maximum D. constant

Description : As per Energy Method, the summation of kinetic energy and potential energy must be ________ which is same at all the times. A. zero B. minimum C. maximum D. constant

Last Answer : D. constant

As per Energy Method, the summation of kinetic energy and potential energy must D be ________ which is same at all the times. ( A ) zero ( B ) minimum ( C ) maximum ( D ) constant

Description : As per Energy Method, the summation of kinetic energy and potential energy must D be ________ which is same at all the times. ( A ) zero ( B ) minimum ( C ) maximum ( D ) constant

Last Answer : ( D ) constant

In Rayleigh’s method, the _____________ at the mean position is equal to the maximum potential energy (or strain energy) at the extreme position. (A) minimum kinetic energy (B) minimum potential energy (C) maximum kinetic energy (D) none of the above

Description : In Rayleigh’s method, the _____________ at the mean position is equal to the maximum potential energy (or strain energy) at the extreme position. (A) minimum kinetic energy (B) minimum potential energy (C) maximum kinetic energy (D) none of the above

Last Answer : (C) maximum kinetic energy

As per Energy Method, the summation of kinetic energy and potential energy must be ________ which is same at all the times. (A) zero (B) minimum (C) maximum (D) constant

Description : As per Energy Method, the summation of kinetic energy and potential energy must be ________ which is same at all the times. (A) zero (B) minimum (C) maximum (D) constant

Last Answer : (D) constant

In damped vibrations, the amplitude of the resulting vibration gradually reduces. This is due to the reason that an amount of energy is always dissipated to overcome the ________ * 1 point (A) Frictional resistance (B) Work done(C) Fluid pressure (D) Air pressure

Description : In damped vibrations, the amplitude of the resulting vibration gradually reduces. This is due to the reason that an amount of energy is always dissipated to overcome the ________ * 1 point (A) Frictional resistance (B) Work done(C) Fluid pressure (D) Air pressure

Last Answer : (A) Frictional resistance

If the body is in a state of equilibrium then the energy is minimum. This statement isconsidered in . a.inverse matrix method b.weighted residual method c.Galerkin’s principle d.the minimum potential energy principle

Description : If the body is in a state of equilibrium then the energy is minimum. This statement isconsidered in . a.inverse matrix method b.weighted residual method c.Galerkin’s principle d.the minimum potential energy principle

Last Answer : d.the minimum potential energy principle

Vibration measuring instruments are classified on the basis of ____________. (A) contact between the vibrating system and measuring instrument (B) the requirement of power source (C) method of measurements (D) all of the above

Description : Vibration measuring instruments are classified on the basis of ____________. (A) contact between the vibrating system and measuring instrument (B) the requirement of power source (C) method of measurements (D) all of the above

Last Answer : (D) all of the above

Which of the above reactions is in accordance with the principle of stoichiometry ?

Description : Which of the above reactions is in accordance with the principle of stoichiometry ?

Last Answer : Observe the following conversions. Which of the above reactions is in accordance with the principle of stoichiometry?

What is June Taylor's birthday?

Description : What is June Taylor's birthday?

Last Answer : June Taylor was born on December 14, 1917.

What where some problems during Zachary taylors presidency?

Description : What where some problems during Zachary taylors presidency?

Last Answer : Feel Free to Answer

Are the Nike Mid Doodle sneakers as comfortable as Converse Chuck Taylors?

Description : Are the Nike Mid Doodle sneakers as comfortable as Converse Chuck Taylors?

Last Answer : Chuck Taylors are much more flimsy so they will provide more comfort for your foot.

Comment on Judge Taylor's attitude to his job. Does he take the trial seriously or not?

Description : Comment on Judge Taylor's attitude to his job. Does he take the trial seriously or not?

Last Answer : Judge Taylor appears to be rather old and tired during the trial. However, the reader knows that he must take his job seriously because he asks Atticus to defend Tom Robinson. As a county judge, he ... Tom a fair defense. And he also knows that by appearing disinterested, he will also keep his job.

Division of labor, authority hierarchy, formal selection, formal rules and regulations, impersonality, and career orientation are all features of: (a) Weber's ideal type bureaucracy. ; (b) General administrative theory. (c) Fayol's principles of management. ; (d) Taylor's principles of management.

Description : Division of labor, authority hierarchy, formal selection, formal rules and regulations, impersonality, and career orientation are all features of: (a) Weber's ideal type bureaucracy. ; (b) General administrative theory. (c) Fayol's principles of management. ; (d) Taylor's principles of management.

Last Answer : (a) Weber's ideal type bureaucracy. ;

Authority, discipline, unity of command, and unity of direction are: (a) Taylor's four principles of management. ; (b) Principles of the human relations movement. (c) Elements of Weber's ideal bureaucratic structure. (d) Four of Fayol's fourteen principles of management.

Description : Authority, discipline, unity of command, and unity of direction are: (a) Taylor's four principles of management. ; (b) Principles of the human relations movement. (c) Elements of Weber's ideal bureaucratic structure. (d) Four of Fayol's fourteen principles of management.

Last Answer : A

Often an unbalance of forces is produced in rotary or reciprocating machinery due to the ______ * 1 point (A) Centripetal forces (B) Centrifugal forces (C) Friction forces (D) Inertia forces

Description : Often an unbalance of forces is produced in rotary or reciprocating machinery due to the ______ * 1 point (A) Centripetal forces (B) Centrifugal forces (C) Friction forces (D) Inertia forces

Last Answer : (D) Inertia forces

If the spring mass system with m and spring stiffness k is taken to very high altitude, the natural frequency of longitudinal vibrations * 1 point (A) increases (B) decreases (C) remain unchanged (D) may increase or decrease depending upon the value of the mass

Description : If the spring mass system with m and spring stiffness k is taken to very high altitude, the natural frequency of longitudinal vibrations * 1 point (A) increases (B) decreases (C) remain unchanged (D) may increase or decrease depending upon the value of the mass

Last Answer : (C) remain unchanged

The speed at which the shaft runs so that the additional deflection from the axis of rotation of the shaft becomes infinite, is known as _________ * 1 point (A) Whirling speed (B) Rotational speed (C) Stabilizing speed (D) Reciprocating speed

Description : The speed at which the shaft runs so that the additional deflection from the axis of rotation of the shaft becomes infinite, is known as _________ * 1 point (A) Whirling speed (B) Rotational speed (C) Stabilizing speed (D) Reciprocating speed

Last Answer : (A) Whirling speed

Frequency is equal to ______. * 1 point (A) time period (B) 1/time period (C) *time period (D) /time period

Description : Frequency is equal to ______. * 1 point (A) time period (B) 1/time period (C) *time period (D) /time period

Last Answer : (B) 1/time period

A mass of 1 kg is attached to two identical springs each with stiffness k = 20 kN/m as shown in the figure. Under frictionless condition, the natural frequency of the system in Hz is close to * 1 point (A) 32 (B) 23 (C) 16 (D) 11

Description : A mass of 1 kg is attached to two identical springs each with stiffness k = 20 kN/m as shown in the figure. Under frictionless condition, the natural frequency of the system in Hz is close to * 1 point (A) 32 (B) 23 (C) 16 (D) 11

Last Answer : (A) 32

What are discrete parameter systems? *1 point (A) Systems which have infinite number of degree of freedom (B) Systems which have finite number of degree of freedom (C) Systems which have no degree of freedom (D) None of the above

Description : What are discrete parameter systems? *1 point (A) Systems which have infinite number of degree of freedom (B) Systems which have finite number of degree of freedom (C) Systems which have no degree of freedom (D) None of the above

Last Answer : (B) Systems which have finite number of degree of freedom

What is meant by critical damping coefficient? * 1 point (A) Frequency of damped free vibrations is less than zero (B). The motion is a periodic in nature (C). Both a. and b. (D). None of the above

Description : What is meant by critical damping coefficient? * 1 point (A) Frequency of damped free vibrations is less than zero (B). The motion is a periodic in nature (C). Both a. and b. (D). None of the above

Last Answer : (C). Both a. and b.

The equivalent stiffness of spring connected in parallel having stiffnesses k1 and k2 can be written as * 1 point (A)(1/k1) + (1/k2) (B) (1/k1) - (1/k2) (C) k1 + k2 (D) None of the above

Description : The equivalent stiffness of spring connected in parallel having stiffnesses k1 and k2 can be written as * 1 point (A)(1/k1) + (1/k2) (B) (1/k1) - (1/k2) (C) k1 + k2 (D) None of the above

Last Answer : (C) k1 + k2

When the body vibrates under the influence of external force, then the body is said to be under ___________ . * 1 point (A) free vibrations (B) natural vibrations (C) forced vibrations (D) damped vibrations

Description : When the body vibrates under the influence of external force, then the body is said to be under ___________ . * 1 point (A) free vibrations (B) natural vibrations (C) forced vibrations (D) damped vibrations

Last Answer : (C) forced vibrations

When a rigid body is suspended vertically and it oscillates with a small amplitude under the action of the force of gravity, the body is known as * 1 point (A) simple pendulum (B) torsional pendulum (C) compound pendulum (D) second’s pendulum

Description : When a rigid body is suspended vertically and it oscillates with a small amplitude under the action of the force of gravity, the body is known as * 1 point (A) simple pendulum (B) torsional pendulum (C) compound pendulum (D) second’s pendulum

Last Answer : (C) compound pendulum