Why do we grease the bearings?

Why do we grease the bearings?
by

1 Answer

Answer :

a) Grease lubricant gives good protection against ingress of moisture and dirt into motor.

b) Easy to seal against leakage of grease into motor compared to oil.

c) Low friction torque at starting. 
by

Related questions

The failure of ball bearings used in electric motors can result from _____________. A. failure to clean the bearing before repacking B. failure to maintain proper alignment C. excess lubrication forcing the bearing full of grease and eliminating all areas of expansion D. all of the above

Description : The failure of ball bearings used in electric motors can result from _____________. A. failure to clean the bearing before repacking B. failure to maintain proper alignment C. excess lubrication forcing the bearing full of grease and eliminating all areas of expansion D. all of the above

Last Answer : Answer: D

Before reassembling any machinery, you should _____________. A. replace all bearings regardless of length of service B. apply a heavy coat of oil to all mating surfaces C. clean any corroded surfaces and file all burrs smooth D. coat all parts with alemite grease

Description : Before reassembling any machinery, you should _____________. A. replace all bearings regardless of length of service B. apply a heavy coat of oil to all mating surfaces C. clean any corroded surfaces and file all burrs smooth D. coat all parts with alemite grease

Last Answer : Answer: C

In hydrostatic bearings (A) The Oil film pressure is generated only by the rotation of the journal (B) The oil film is maintained by supplying oil under pressure (C) Do not require external supply of lubricant (D) Grease is used for lubrication

Description : In hydrostatic bearings (A) The Oil film pressure is generated only by the rotation of the journal (B) The oil film is maintained by supplying oil under pressure (C) Do not require external supply of lubricant (D) Grease is used for lubrication

Last Answer : (B) The oil film is maintained by supplying oil under pressure

Which of the listed conditions will occur if dirt and grease are allowed to accumulate between the commutator segments of a motor? A. A partial short circuit. B. A dead short circuit. C. Misalignment of the motor shaft. D. Overspeeding of the motor.

Description : Which of the listed conditions will occur if dirt and grease are allowed to accumulate between the commutator segments of a motor? A. A partial short circuit. B. A dead short circuit. C. Misalignment of the motor shaft. D. Overspeeding of the motor.

Last Answer : Answer: A

Magnet chatter or 'pumping' occurring in a magnetic contactor can be caused by ______________. A. dirt or grease on pole faces B. mechanical interference in the contacts C. chattering contacts on the control relay D. magnetic lock out of the contacts

Description : Magnet chatter or 'pumping' occurring in a magnetic contactor can be caused by ______________. A. dirt or grease on pole faces B. mechanical interference in the contacts C. chattering contacts on the control relay D. magnetic lock out of the contacts

Last Answer : Answer: C

Grease coatings on electrical contact surfaces increase contact resistance and should be removed with a/an _______________. A. small wire brush B. compressed air jet C. clean dry cloth D. 10% solution carbon solvent and water

Description : Grease coatings on electrical contact surfaces increase contact resistance and should be removed with a/an _______________. A. small wire brush B. compressed air jet C. clean dry cloth D. 10% solution carbon solvent and water

Last Answer : Answer: C

When replacing a power transistor fitted with a heat sink in a circuit, a coating of silicone grease is applied between the transistor case and the heat sink. This is done to ____________. A. lubricate the transistor B. lubricate the heat sink C. aid in the removal of the heat sink D. provide maximum heat transfer

Description : When replacing a power transistor fitted with a heat sink in a circuit, a coating of silicone grease is applied between the transistor case and the heat sink. This is done to ____________. A. lubricate ... the heat sink C. aid in the removal of the heat sink D. provide maximum heat transfer

Last Answer : Answer: D

Where oil lubrication is preferred over grease lubrication?

Description : Where oil lubrication is preferred over grease lubrication?

Last Answer : a) Determined by speed and operating temperature. b) Oil lubrication recommended. c) When speed and temperature is high. d) When heat to be conducted away from bearing. e) When adjacent machine ... High viscous oil for low speed machine, low viscous oil for high speed machine. g) At temp

On large generators, space heaters are used to ____________. A. keep the machine at ambient tmperature of the machinery space B. maintain rotor and stator winding temperatures above the dew point to prevent the formation of condensation C. prevent condensation in the lube oil D. prevent electrolysis due to condensation in the bearings

Description : On large generators, space heaters are used to ____________. A. keep the machine at ambient tmperature of the machinery space B. maintain rotor and stator winding temperatures above the dew point ... C. prevent condensation in the lube oil D. prevent electrolysis due to condensation in the bearings

Last Answer : Answer: B

To protect the rotor of a motor disassembled for maintenance or overhaul, it should be ___________________. A. suspended by wire slings in one corner of the shop B. stowed upright on its shaft C. supported by two 'V' notched wood blocks D. returned to the frame as soon as the bearings are removed

Description : To protect the rotor of a motor disassembled for maintenance or overhaul, it should be ___________________. A. suspended by wire slings in one corner of the shop B. stowed upright on its shaft C. supported by two 'V' notched wood blocks D. returned to the frame as soon as the bearings are removed

Last Answer : Answer: C

On electrical generators one of the bearings is isolated from the bedplate. This insulating block should not be painted and must be kept clean to ___________. A. protect operating personnel from shock B. create an isolated ground for the instrumentation C. allow for the expansion of the generator away from the prime mover as it warms up D. eliminate shaft currents to prevent damaging the bearings

Description : On electrical generators one of the bearings is isolated from the bedplate. This insulating block should not be painted and must be kept clean to ___________. A. protect operating personnel from shock ... the prime mover as it warms up D. eliminate shaft currents to prevent damaging the bearings

Last Answer : Answer: D

If the bearings of an electrical generator are failing more frequently than expected and the lubricating oil is sludging then you should ______________. A. check the connections to the output leads B. check the bearing insulating block on one end of the unit C. replace the bearing with a sealed roller type D. replace the thrust bearing of the prime mover

Description : If the bearings of an electrical generator are failing more frequently than expected and the lubricating oil is sludging then you should ______________. A. check the connections to the output leads B. ... replace the bearing with a sealed roller type D. replace the thrust bearing of the prime mover

Last Answer : Answer: B

The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END-AFT END, Top .045 - .049, Right Side .045 - .047, Left Side .045 - .047, Bottom .045 - .041 Which of the f A. both the aft and foward bearings should be replaced. B. Shims should be removed from the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Description : The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END-AFT END, Top .045 - .049, Right Side .045 - .047, Left ... the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Last Answer : Answer: A

Air gap readings should be taken on electrical generation machinery periodicly to _________. I. determine the need for cleaning II. check the condition of the bearings A. I only B. II only C. both I and II D. neither I or II

Description : Air gap readings should be taken on electrical generation machinery periodicly to _________. I. determine the need for cleaning II. check the condition of the bearings A. I only B. II only C. both I and II D. neither I or II

Last Answer : Answer: B

Air gap readings for electrical generating equipment should be taken periodicly. This is to _______. I. determine the condition of the bearings II. prevent damage to the rotor and stator A. I only B. II only C. both I and II D. neither I or II

Description : Air gap readings for electrical generating equipment should be taken periodicly. This is to _______. I. determine the condition of the bearings II. prevent damage to the rotor and stator A. I only B. II only C. both I and II D. neither I or II

Last Answer : Answer: C

If air gap readings for an electical generating machine have changed significantly from the last reading, you should check _________. A. the bearings B. insulation readings and machine cleanliness C. the prime mover thrust bearing D. the field coil bolts for the proper torque values

Description : If air gap readings for an electical generating machine have changed significantly from the last reading, you should check _________. A. the bearings B. insulation readings and machine cleanliness C. the prime mover thrust bearing D. the field coil bolts for the proper torque values

Last Answer : Answer: A

Air gap readings should be taken periodicly on electrical generation equipment to __________. A. determine the amount of varnish that can be applied to correct insulation problems B. determine the condition of the bearings C. provide for the correct proper tightening of the field coil bolts and correct lateral adjustment of the field coils D. increase machine efficiency

Description : Air gap readings should be taken periodicly on electrical generation equipment to __________. A. determine the amount of varnish that can be applied to correct insulation problems B. determine the ... field coil bolts and correct lateral adjustment of the field coils D. increase machine efficiency

Last Answer : Answer: B

To protect the rotor of a motor disassembled for maintenance or overhaul, it should be ___________________. A. suspended by wire slings in one corner of the shop B. wrapped in several layers of heavy paper or cardboard C. supported by flat wood blocks on the workbench D. returned to the frame as soon as the bearings are removed

Description : To protect the rotor of a motor disassembled for maintenance or overhaul, it should be ___________________. A. suspended by wire slings in one corner of the shop B. wrapped in several layers of heavy ... flat wood blocks on the workbench D. returned to the frame as soon as the bearings are removed

Last Answer : Answer: B

A split-phase induction squirrel-cage motor will not come up to speed, even though the rated voltage, rated frequency, and rated load are applied. The suspected trouble could be due to _____________. A. a faulty centrifugal switch B. broken rotor bars C. worn bearings D. all of the above

Description : A split-phase induction squirrel-cage motor will not come up to speed, even though the rated voltage, rated frequency, and rated load are applied. The suspected trouble could be due to _____________. A. a faulty centrifugal switch B. broken rotor bars C. worn bearings D. all of the above

Last Answer : Answer: D

When disassembling electric motors for maintenance or overhaul, ________________. A. punch mark frame and end bells for proper assembly B. wrap bearings in lint free cloths if they are to be reused C. tag and store small parts in a box D. all of the above

Description : When disassembling electric motors for maintenance or overhaul, ________________. A. punch mark frame and end bells for proper assembly B. wrap bearings in lint free cloths if they are to be reused C. tag and store small parts in a box D. all of the above

Last Answer : Answer: D

The reactive power drawn by a motor from an AC generator is the power which is _____________. A. used to establish the magnetic field of the motor B. lost in overcoming friction in the bearings C. strictly converted to heat generated by current flow through the windings D. transmitted directly through the rotor shaft to perform useful work

Description : The reactive power drawn by a motor from an AC generator is the power which is _____________. A. used to establish the magnetic field of the motor B. lost in overcoming friction in the ... by current flow through the windings D. transmitted directly through the rotor shaft to perform useful work

Last Answer : Answer: A

One of the generator or motor bearings is generally insulated from the end housing in order to prevent ________. A. rapid brush wear B. current leakage from the shaft C. excessive field winding heat D. circulation of shaft currents induced in the machine's frame

Description : One of the generator or motor bearings is generally insulated from the end housing in order to prevent ________. A. rapid brush wear B. current leakage from the shaft C. excessive field winding heat D. circulation of shaft currents induced in the machine's frame

Last Answer : Answer: D

The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END -AFT END, Top .045 - .049 , Right Side .045 - .047, Left Side .045 - .047 , Bottom .045 - .041 Which of the fo A. The aft bearing should be realigned or replaced. B. Shims should be removed from the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Description : The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END -AFT END, Top .045 - .049 , Right Side .045 - .047, Left ... the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Last Answer : Answer: A

In the illustrated motor, roller bearings are used because __________. EL-0001 A. of their ability to absorb moderate thrust loads B. they electrically insulate the rotor from the frame reducing cross-currents C. the shafting and end bells do not require as close a tolerance to properly fit this type of bearing D. the clearance between the rotor and stator is generally as close as mechanical tolerance will permit

Description : In the illustrated motor, roller bearings are used because __________. EL-0001 A. of their ability to absorb moderate thrust loads B. they electrically insulate the rotor from the frame reducing ... clearance between the rotor and stator is generally as close as mechanical tolerance will permit

Last Answer : Answer: D

The air gap in an induction motor should be periodically checked with a feeler gage to prevent possible ___________. A. rotor contact with the stator B. axial misalignment of the rotor C. damage to the motor bearings D. electrical damage to the bearings

Description : The air gap in an induction motor should be periodically checked with a feeler gage to prevent possible ___________. A. rotor contact with the stator B. axial misalignment of the rotor C. damage to the motor bearings D. electrical damage to the bearings

Last Answer : Answer: A

When removing ball or roller bearings from the shaft of a motor, you should use a _____________. A. rawhide hammer B. brass mallet C. wheel puller D. soft iron pry bar

Description : When removing ball or roller bearings from the shaft of a motor, you should use a _____________. A. rawhide hammer B. brass mallet C. wheel puller D. soft iron pry bar

Last Answer : Answer: C

The only point in the steering stand shown in the illustration which needs periodic lubrication is the ______________. EL-0098 A. repeater assembly ball bearings B. steering wheel bearing C. operation selector switch D. course selector pointer

Description : The only point in the steering stand shown in the illustration which needs periodic lubrication is the ______________. EL-0098 A. repeater assembly ball bearings B. steering wheel bearing C. operation selector switch D. course selector pointer

Last Answer : Answer: B

What are the causes of failure of bearings?

Description : What are the causes of failure of bearings?

Last Answer : a) Faulty mounting b) Faulty lubrication c) Foreign matter in lubrication d) Water in the bearing arrangement e) Vibration f) Inoccurrences of form of shaft or housing seating. g) Passage of electric current. h) Metal fatigue

Which bearings preferred for all large power motor?

Description : Which bearings preferred for all large power motor?  

Last Answer : Plain bearings  

Where preloaded ball bearings used?

Description : Where preloaded ball bearings used? 

Last Answer : If more vibration exists even when machine is not in running conditions.  

What is the operating life of bearings?

Description : What is the operating life of bearings? 

Last Answer : a) Continuous 24 hrs operation – 40000 to 50000 hrs. b) Affected by load axially or radial. c) Operating temperature. 

What are the types of bearings are adopted for small motors and large motors?

Description : What are the types of bearings are adopted for small motors and large motors?

Last Answer : Small motors (LT motors) Horizontal mounted - deep groove ball bearing at both ends. Medium motors Roller bearing at DE and deep groove bearing at NDE. Large motors (HT motors above 750 kW) Horizontal ... mounted - face to face angular contact ball bearing at NDE and roller or ball bearing at DE.

Can we use servo gem Ep3 grease instead of Esso unirex N3?

Description : Can we use servo gem Ep3 grease instead of Esso unirex N3?

Last Answer : Feel Free to Answer

Do you have any suggestions for a great grease cutting agent?

Description : Do you have any suggestions for a great grease cutting agent?

Last Answer : rojo IMHO liquid Dawn is what they used to save wild birds after oil spills. That says a lot!

Does digested grease plug up toilets?

Description : Does digested grease plug up toilets?

Last Answer : Grease is usually not “digested” it just passes through, some of the fat is absorbed but not all of it. So yes, grease is grease. So yup !

Has anyone invented a way to pour grease down the drain?

Description : Has anyone invented a way to pour grease down the drain?

Last Answer : No. Unless you have a garbage disposal. What do you mean anymore ? Is your pipe getting clogged with solidified grease? You might need some Drano or Liquid Plumr. And stop using your sink to put grease in ... in the season for that, but you can just wipe it with a paper towel and reuse the tin.)

How can bacon grease be repurposed?

Description : How can bacon grease be repurposed?

Last Answer : I understand that soap can be made from grease, although I don’t know exactly how.

Have you ever successfully removed a grease stain from a garment after it was washed?

Description : Have you ever successfully removed a grease stain from a garment after it was washed?

Last Answer : answer:I throw them out. I may keep one if it's not too bad, for around the house, paint projects, etc. Seriously, life is too short to wear stuff that looks like crap. Also, my house is too small ... stain out. You can try soaking it in a pre-wash treatment but it's not likely to be entirely gone.

Recycling question: Why can't they come up with a process to remove the grease from the slurry when recycling papers and cardboards that have food on them?

Description : Recycling question: Why can't they come up with a process to remove the grease from the slurry when recycling papers and cardboards that have food on them?

Last Answer : answer:I didn't know that. Really? Who is going to bother to cut out the greasy portion of the pizza box. I recycle pizza boxes and paper plates by burning them in my wood burning stove and ... sure attractant for raccoons and other critters. You will wake up to a mess all over your front lawn.

What is the best way to get a grease spot off of brick pavers?

Description : What is the best way to get a grease spot off of brick pavers?

Last Answer : answer:Dump a lot of baking soda on the spot, add a tiny amount of water enough to make a paste (don't add too much because you're using it like a scouring powder). Work away at it with a ... it all up, you could consider using a sealer on your bricks. Grease and other stains will come up faster.

Would window/door screen material work to filter particles out of grease?

Description : Would window/door screen material work to filter particles out of grease?

Last Answer : I’d think cheesecloth is the way to go. Unless maybe you could line up several layers of screening, with the holes slightly offset.

How can I get built-up old grease off of wooden kitchen cabinets?

Description : How can I get built-up old grease off of wooden kitchen cabinets?

Last Answer : answer:Spic and Span in the box is very good for this type of cleaning. It comes in a box of granuales. You can use what is necesarry to complete the job.

Do you throw bacon grease down the drain?

Description : Do you throw bacon grease down the drain?

Last Answer : yes, it can make a real mess, not only does it clog but other things adhere to it even following it with hot water may not be enough. play it safe and let it cool and toss it in the trash.

My cookie recipe says grease sheet but I don't have Crisco. what can I substitue?

Description : My cookie recipe says grease sheet but I don't have Crisco. what can I substitue?

Last Answer : The pam is fine and so is the butter, just use lightly.

Is there any way to clean up grease stains on an external surface?

Description : Is there any way to clean up grease stains on an external surface?

Last Answer : How about vinegar and water, in a pail and use a sponge? Hope the trail isn’t too long.

How do you dispose of fried bacon grease?

Description : How do you dispose of fried bacon grease?

Last Answer : “Line a heat tolerant bowl with aluminum foil. Pour the hot grease you’ve drained off into the lined bowl. When it has hardened, simply gather the edges of the foil and toss it into the garbage.” It is bad for your sink and what not, but i’m sure theres some use for it somewhere.

Where can I buy grease paint in NYC?

Description : Where can I buy grease paint in NYC?

Last Answer : Try Ricky’s…there are several locations.

Do you grease the pan while baking cookies?

Description : Do you grease the pan while baking cookies?

Last Answer : Grease doesn’t allow cookies to ‘grip’ onto the sheet. If you grease a sheet pan for, lets say, chocolate chip cookies, they will flat and crispy. An ungreased sheet will produce taller, moist, squishy cookies.

How do I get grease stains out of a favorite sweater?

Description : How do I get grease stains out of a favorite sweater?

Last Answer : From a cursory internet expedition, I am seeing that spraying WD-40 on the grease spots, rubbing it in, and then cleaning it with dish detergent (Dawn), is a good way to get it out of cotton garments. I wouldn’t worry about the nylon and spandex.