Description : ______ is used for a shaft that supports rotating elements like wheels, drums or rope sleaves. a) Spindle b) Axle c) Shaf d) None of the listed
Last Answer : a) Spindle
Description : ______ is used for a shaft that supports rotating elements like wheels, drums or rope sleaves. a) Spindle b) Axle c) Shaf d) cylinder
Description : Is it necessary for an axle to be ______ with respect to rotating element? a) Stationary b) Moving c) Moving or stationary d) None of the listed
Last Answer : c) Moving or stationary
Description : Static load is defined as the load acting on the bearing when shaft is _____ a) Stationary b) Rotating at rpm
Last Answer : a) Stationary
Description : Which of the following is not designed under torsion equation? a. Spindle b. Axle c. Low cost shaft d. Shaft with variable diameter
Last Answer : b. Axle
Description : Critical speed is expressed as ______. A) rotation of the shaft in degrees (B) rotation of the shaft in radians (C) rotation of the shaft in minutes (D) the natural frequency of the shaf
Last Answer : (D) the natural frequency of the shaft
Description : A full journal bearing having clearance to radius ratio of 1/100, using a lubricant with μ=28×10-3 Pa s supports the shaft journal running at N = 2400 rpm If bearing pressure is 1.4 MPa, the Somerfield number is [IES-2001] (a) 8×10-3 (b) 8×10-5 (c) 0.48 (d) 0.48×10
Last Answer : (a) S = (μN s /p) (r/c) 2
Description : A_______ bearing supports the load acting along the axis of the shaft. a) Thrust b) Radial c) Longitudinal d) Transversal
Last Answer : a) Thrust
Description : A radial bearing supports the load that acts along the axis of the shaft. a) True b) False
Last Answer : b) False
Description : Calculate the bearing life if expected life for 90% bearings is 9000 hr and the shaft is rotating at 1500 rpm. (a) 850 million rev (b) 810 million rev (c) 810 hr (d) 850 hr
Last Answer : (b) 810 million rev
Description : The static load is defined as the load acting on the bearing when the shaft is _____. (a) stationary (b) rotating at rpm
Last Answer : (a) stationary
Description : Which one of the following parts of a ball bearing is mounted on the rotating shafts and tends to rotate the shaft? (a) Inner race (b) Outer race (c) Rolling element (d) Cage
Last Answer : (a) Inner race
Description : Shaft is rotating machine element. A. True B. False
Last Answer : A. True
Description : Which of the following are functions of bearings? a) Ensure free rotation of shaft with minimum friction b) Holding shaft in a correct position c) Transmit the force of the shaft to the frame d) All of the listed
Last Answer : d) All of the listed
Description : If a circular shaft is welded to the plate by means of circumferential fillet, then the shaft is subjected to torsional moment M. If throat of weld is t, then torsional shear stress is given by a) M/2πtr2 b) M/πtr2 c) M/4πtr2 d) None of the listed
Last Answer : a) M/2πtr2
Description : If 8 bolts are emplaced in a clamp coupling with shaft diameter 80mm d, calculate the tensile force on each bolt if coefficient of friction is 0.3 and torque transmitted is 4000N-m. a) 51234.4N b) 45968.3N c) 41666.7N d) None of the listed
Last Answer : c) 41666.7N
Description : A muff coupling is connecting two shafts. The torque involved is 650N-m. The shaft diameter is 45mm with length and height of the key being 14mm and 80mm respectively. Find the compressive stress induced in the key. a) 70.1 N/mm2 b) 51.6N/mm2 c) 45.5N/mm2 d) None of the listed
Last Answer : b) 51.6N/mm2
Description : A muff coupling is connecting two shafts. The torque involved is 650N-m. The shaft diameter is 45mm with length and breadth of the key being 14mm and 80mm respectively. Find the shear stress induced in the key. a) 30.2N/mm2 b) 25.8N/mm2 c) 34.4N/mm2 d) None of the listed
Last Answer : b) 25.8N/mm2
Description : Woodruff key permits _____ movement b/w shaft and the hub. a) Axial b) Radial c) Eccentric d) None of the listed
Last Answer : b) Radial
Description : Calculate the shaft diameter on rigidity basis if torsional moment is 196000N-mm, length of shaft is 1000mm. Permissible angle of twist per meter is 0.5’ and take G=79300N/mm2. a) None of the listed b) 41.2mm c) 35.8mm d) 38.8mm
Last Answer : b) 41.2mm
Description : When the shaft is subjected to pure torsional moment, the torsional stress is given by? a) None of the listed b) 32M/πdɜ c) 16M/πdɜ d) 8M/πdɜ
Last Answer : c) 16M/πdɜ
Description : When the shaft is subjected to pure bending moment, the bending stress is given by? a) None of the listed b) 32M/πdɜ c) 16M/πdɜ d) 8M/πdɜ
Last Answer : b) 32M/πdɜ
Description : Is it necessary for an axle to be ______ with respect to rotating element? a) Stationary b) Moving c) Moving or stationary d) fixed
Description : A journal bearing is a ______ contact bearing working on the hydrodynamic lubrication and which supports load in____ direction. a) Sliding, Axial b) Rolling, Radial c) Sliding, Radial d) Rolling, Axial
Last Answer : c) Sliding, Radial
Description : Shafts are subjected to ______ forces. a) Compressive b) Tensile c) Shear d) None of the listed
Last Answer : b) Tensile
Description : An antifriction bearing consists of (a) rolling elements (b) races (c) cages (d) all of the listed
Last Answer : (d) all of the listed
Description : Axle is frequently used in torque transmission. a) True b) False
Description : Can the cotter joint be used to connect slide spindle and fork of valve mechanism? a) True b) False
Last Answer : a) True
Description : Why ABC is considered electro-mechanical computer? A) Because it was invented before electronic computers were developed B) Because there are wheels, drums, bars to rotate and move to produce result C) Because they use the flow of electrons in different component D) None of above
Last Answer : Answer : B
Description : Archaeologists have found spindle wheels, made of terracotta and …………………. -Social Science
Last Answer : answer:
Description : Taper rolling supports a) Axial loads b) Thrust loads c) Both axial and thrust loads d) None of the mentioned
Last Answer : c) Both axial and thrust loads
Description : Cotter joint is used in bicycle to join pedal with sprocket wheels. A. True B. False
Description : When the torque required by the machine is more than the torque supplied by the motor, the flywheel is (A) Accelerated (B) Retarded (C) Rotating with constant speed (D) Any of the above
Last Answer : (B) Retarded
Description : Assertion (A): In hydrodynamic journal bearings, the rotating journal is held in floating condition by the hydrodynamic pressure developed in the lubricant. Reason (R): Lubricant flows in a converging-diverging channel. [IES-1994] ... A (c) A is true but R is false (d) A is false but R is true
Last Answer : (a) Both A and R are individually true and R is the correct explanation of A
Description : Consider the following statements: [IES 2007] For a journal rotating in a bearing under film lubrication conditions, the frictional resistance is- 1. Proportional to the area of contact 2. Proportional to the viscosity of lubricant 3. ... 4 (b) 1 and 4 only (c) 2, 3 and 4 only (d) 2 and 3 only
Last Answer : (a) 1, 2, 3 and 4
Description : Assertion (A): In steady rotating condition the journal inside a hydrodynamic journal bearing remains floating on the oil film. [IES-2008] Reason (R): The hydrodynamic pressure developed in steady rotating conditions in journal ... A (c) A is true but R is false (d) A is false but R is true
Last Answer : (a) Both A and R are true and R is the correct explanation of A
Description : Cotter joints is used for transforming rotating torque. A. True B. False
Last Answer : B. False
Description : A knuckle joint is unsuitable for two rotating shafts, which transmit torque a) True b) False
Description : A coupling is a mechanical device that temporarily joins two rotating shafts to each other. a) True b) False
Description : A bushed-pin type flange coupling is used (A) For intersecting shafts (B) When the shafts are not in exact alignment (C) For small shafts rotating at slow speeds (D) For parallel shafts
Last Answer : (B) When the shafts are not in exact alignment
Description : Molybdenum steels containing 0.15 to 0.40% molybdenum (A) Are prone to temper brittleness (B) Are used for automobile parts like gears, axle, shaft, bearings etc. (C) Have very poor fatigue resistance
Last Answer : (B) Are used for automobile parts like gears, axle, shaft, bearings etc