The real application of knuckle joint is used to connect three rods - two with forks and a

third with the eye.

A. True

B. False

1 Answer

Answer :

A. True

Related questions

Description : Knuckle Joint is used to connect the two rods whose axes are coincide or intersect and lies in the same plane. A. True B. False

Last Answer : A. True

Description : Knuckle Joint can’t be used to connect two intersecting rods. a) Yes b) No, it can’t be used c) It can be used with some modificatios d) It is expensive and hence isn’t used

Last Answer : b) No, it can’t be used

Description : Cotter joint is going to be use to connect the two rods for torque transmission purpose. a) True b) False

Last Answer : b) False

Description : Cotter joint can be used to connect two rods for torque transmission purpose. true /false. a) True b) False

Last Answer : b) False

Description : Cotter joint can be used to connect two rods for torque transmission purpose. a) True b) False

Last Answer : b) False

Description : The knuckle joint is used two joint between the tie bars in roof trusses. A. True B. False

Last Answer : A. True

Description : A knuckle joint is unsuitable for two rotating shafts, which transmit torque a) True b) False

Last Answer : a) True

Description : A knuckle joint is also called socket pin joint. a) True b) False

Last Answer : b) False

Description : The knuckle joint is used to connect the... A. Two roads whose Axes are coincide or intersecting and lies in single plane. B. Two roads whose Axes are coincide or intersecting and lies in multiple ... Two roads whose Axes are parallel or intersecting and lies in single plane. D. None of the above

Last Answer : A. Two roads whose Axes are coincide or intersecting and lies in single plane.

Description : Which of the following are parts of knuckle joint. A. Eye B. Pin C.Fork D. All of the above

Last Answer : D. All of the above

Description : Which of the following are important parts of knuckle joint? a) Eye b) Pin c) Fork d) Each of the mentioned

Last Answer : d) Each of the mentioned

Description : A cotter joint is used to connect two __________ rods. A. Co-axial B. Perpendicular C. Parallel D. None of these

Last Answer : A. Co-axial

Description : Within the external combination engine, a piston rod is usually connected to the cross head by means of....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Last Answer : A. Cotter joints

Description : The knuckle joint is made up of... A. Cast iron B. stainless Steel C. Teflon D. All of the above

Last Answer : D. All of the above

Description : The split - pin is used in... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

Description : The joints between link of a suspension bridge, which of the following joints used.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

Description : The diameter of knuckle pin in the knuckle joint is usually... A. 0.5 d B. 0.8 d C. 1.5 d D. d

Last Answer : D. d

Description : To joining the links of a bicycle chain which of the following joint is used. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

Description : Forked - pin joints is also called as... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

Description : The valve rod connected in steam engine by using.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

Description : Maximum rod connecting limit by using knuckle joint is . A. 2 B. 3 C. 4 D. 5

Last Answer : B. 3

Description : In steam engine, the piston rod is usually connected to the cross head by means of a....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing

Last Answer : A. Cotter joints

Description : A knuckle joint can be used in valve mechanism of a reciprocating engine. a) Yes b) No c) Yes but there are stress probles d) No as it is very dangerous to use

Last Answer : a) Yes

Description : A maximum of how many roads may be connected using a knuckle joint? a) 2 b) 3 c) 4 d) 5

Last Answer : b) 3

Description : Teflon can be used for manufacturing of knuckle joints. A. True B. False

Last Answer : A. True

Description : Can the cotter joint be used to connect slide spindle and fork of valve mechanism? a) True b) False

Last Answer : a) True

Description : A but joint can be defined as a joint between two components lying approximately in a different plane. a) True b) False

Last Answer : b) False

Description : Cotter joint is used in bicycle to join pedal with sprocket wheels. A. True B. False

Last Answer : A. True

Description : Cotter joint is a permanent fastening. a) true b) false

Last Answer : b) false

Description : Cotter joint is connected to parallel roads . A. True B. False

Last Answer : B. False

Description : Cotter joint is connected to parallel roads . A. True B. False

Last Answer : B. False

Description : The following bracket is welded to the vertical column. The joint undergoes torsional stresses. a) True b) False

Last Answer : b) False

Description : The principle of wedge action is used in cotter joint. a) True b) False

Last Answer : a) True

Description : Oldham coupling i used to connect two shafts having intersecting axes. a) True b) False

Last Answer : b) False

Description : Oldham coupling i used to connect two shafts having intersecting axes. a) True b) False

Last Answer : b) False

Description : Belleville spring can be used in clutch application. a) True b) False

Last Answer : a) True

Description : What is the primary measurement application for tuning forks?

Last Answer : They are used to monitor fixed motor speeds.

Description : Cotter joint is employed when the members are subjected to which sort of stresses? a) Axial tensile b) Axial compressive c) Axial tensile or compressive d) None of the above

Last Answer : c) Axial tensile or compressive

Description : Which of the subsequent must not be a section of cotter joint? a) Socket b) Spigot c) Cotter d) Collar

Last Answer : d) Collar

Description : The angle of V-welded joint in a pressure vessel 30 to 45 0 40 to 55 0 55 to 70 0 None

Last Answer : 55 to 70 0

Description : Welded joints are a. Hinged joint b. Rigid joint c. Freely supported joint

Last Answer : b. Rigid joint

Description : Welded structures with respect to riveted joint is a. Weakened in tension b. Strengthened in tension c. No change in tension strength d. None

Last Answer : c. No change in tension strength

Description : The strength of a welded joint with respect to a riveted joint is a. Greater b. Smaller c. Equal d. None

Last Answer : a. Greater

Description : Efficiency of a welded joint with respect to a riveted joint is a. Smaller b. Equal c. Greater

Last Answer : c. Greater

Description : Which welded joint used in the circumferential joint of a cylindrical pressure vessel is (i) Butt joint (ii) Lap joint (iii)Screwed joint (iv) None

Last Answer : (ii) Lap joint

Description : Welded joint used in the longitudinal joint of a cylindrical pressure vessel is (i) Butt joint (ii) Lap joint (iii)Screwed joint (iv) None

Last Answer : (i) Butt joint

Description : The advantage of a welded joint over a riveted joint is (i) Introduce residual stresses (ii) Requires highly skilled labor and supervision (iii) Lighter in weight (iv) None

Last Answer : (iii) Lighter in weight

Description : The name of the welded joint made by placing the plates edge to edge is (i) Fillet welded joint (ii) Butt welded joint (iii) Fillet-Butt welded joint (iv) None

Last Answer : (ii) Butt welded joint

Description : By overlapping the plates, which type of welded joint is made (i) Fillet welded joint (ii) Butt welded joint (iii) Fillet-Butt welded joint (iv) None

Last Answer : (i) Fillet welded joint

Description : Internal defects in a welded joint can be found by a process called (i) Tension test (ii) Visual inspection (iii) Radio graphing (iv) None

Last Answer : (iii) Radio graphing