Description : To joining the links of a bicycle chain which of the following joint is used. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint
Last Answer : B. Knuckle joint
Description : Cotter joint is a permanent fastening. a) true b) false
Last Answer : b) false
Description : Cotter joint is going to be use to connect the two rods for torque transmission purpose. a) True b) False
Last Answer : b) False
Description : Cotter joint is connected to parallel roads . A. True B. False
Last Answer : B. False
Description : Cotter joint can be used to connect two rods for torque transmission purpose. true /false. a) True b) False
Description : Cotter joint can be used to connect two rods for torque transmission purpose. a) True b) False
Description : Can the cotter joint be used to connect slide spindle and fork of valve mechanism? a) True b) False
Last Answer : a) True
Description : The principle of wedge action is used in cotter joint. a) True b) False
Description : A cotter joint is used to connect two __________ rods. A. Co-axial B. Perpendicular C. Parallel D. None of these
Last Answer : A. Co-axial
Description : Within the external combination engine, a piston rod is usually connected to the cross head by means of....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing
Last Answer : A. Cotter joints
Description : Cotter joint is employed when the members are subjected to which sort of stresses? a) Axial tensile b) Axial compressive c) Axial tensile or compressive d) None of the above
Last Answer : c) Axial tensile or compressive
Description : Which of the subsequent must not be a section of cotter joint? a) Socket b) Spigot c) Cotter d) Collar
Last Answer : d) Collar
Description : The split - pin is used in... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint
Description : The joints between link of a suspension bridge, which of the following joints used.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint
Description : Forked - pin joints is also called as... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint
Description : The valve rod connected in steam engine by using.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint
Description : In steam engine, the piston rod is usually connected to the cross head by means of a....... A. Cotter joints B. Universal joints C. Knuckle joint D. Bearing
Description : Which of the following is not a part of cotter joint? a) Socket b) Spigot c) Cotter d) Collar
Description : Cotter joint is used when the members are subjected to which type of stresses? a) Axial tensile b) Axial compressive c) Axial tensile or compressive d) None of the mentioned
Description : Cotter joints is used for transforming rotating torque. A. True B. False
Description : Explain Bicycle Rear Wheel Sprocket Working?
Last Answer : Rear wheel sprocket works under the principle of ratchet and pawl.
Description : The taper on cotter and slot is fomed on both the location is agreed or not.. a) agree b) disagree
Last Answer : b) disagree
Description : Cotter joints is used for transforming........... A. Axial compressive load B. Axial tensile load C. Axial tensile or compressive load D. Twisting load
Last Answer : C. Axial tensile or compressive load
Description : Cotter joints is connected two ......... roads. A. Co - axial B. Parallel C. Perpendicular D. Inclined
Last Answer : A. Co - axial
Description : Taper on Cotter is varies from A. 1 in 15 to 1 in 12 B. 1 in 20 to 1 in 15 C. 1 in 25 to 1 in 20 D. 1 in 48 to 1 in 24
Last Answer : D. 1 in 48 to 1 in 24
Description : The draw of cotter should not be more than the........ A. 3 mm B. 4 mm C. 5 mm D. 6 mm
Last Answer : A. 3 mm
Description : Taper is made cotter and slot on both the side. A. Yes B. No
Last Answer : B. No
Description : The real application of knuckle joint is used to connect three rods - two with forks and a third with the eye. A. True B. False
Last Answer : A. True
Description : The knuckle joint is used two joint between the tie bars in roof trusses. A. True B. False
Description : Knuckle Joint is used to connect the two rods whose axes are coincide or intersect and lies in the same plane. A. True B. False
Description : The following bracket is welded to the vertical column. The joint undergoes torsional stresses. a) True b) False
Description : A knuckle joint is also called socket pin joint. a) True b) False
Description : A knuckle joint is unsuitable for two rotating shafts, which transmit torque a) True b) False
Description : A but joint can be defined as a joint between two components lying approximately in a different plane. a) True b) False
Description : What happens when the bicycle rider pushes down on the pedal?
Last Answer : If the rider pushes down on the forward side, the top run of thechain goes tight, the rear Wheel begins to turn and the bike startsto move forward.
Description : How much distance (in cm) will the bicycle shown below travel, if the pedal makes 1.5 revolutions? (Assume π = 22/7).
Last Answer : 330
Description : Splines are commonly used in (A) Machine tool gear box (B) Automobile gear box (C) Hoist and crane gear box (D) Bicycle
Last Answer : (B) Automobile gear box
Description : ______ is used for a shaft that supports rotating elements like wheels, drums or rope sleaves. a) Spindle b) Axle c) Shaf d) None of the listed
Last Answer : a) Spindle
Description : What was the two purpose of providing clearance in cotter joint?
Last Answer : Feel Free to Answer
Description : The knuckle joint is made up of... A. Cast iron B. stainless Steel C. Teflon D. All of the above
Last Answer : D. All of the above
Description : The diameter of knuckle pin in the knuckle joint is usually... A. 0.5 d B. 0.8 d C. 1.5 d D. d
Last Answer : D. d
Description : Which of the following are parts of knuckle joint. A. Eye B. Pin C.Fork D. All of the above
Description : Maximum rod connecting limit by using knuckle joint is . A. 2 B. 3 C. 4 D. 5
Last Answer : B. 3
Description : The knuckle joint is used to connect the... A. Two roads whose Axes are coincide or intersecting and lies in single plane. B. Two roads whose Axes are coincide or intersecting and lies in multiple ... Two roads whose Axes are parallel or intersecting and lies in single plane. D. None of the above
Last Answer : A. Two roads whose Axes are coincide or intersecting and lies in single plane.