Explain Bicycle Rear Wheel Sprocket Working?

Explain Bicycle Rear Wheel Sprocket Working?
by

1 Answer

Answer :

Rear wheel sprocket works under the principle of ratchet and pawl.
by

Related questions

Cotter joint is used in bicycle to join pedal with sprocket wheels. A. True B. False

Description : Cotter joint is used in bicycle to join pedal with sprocket wheels. A. True B. False

Last Answer : A. True

How does the rear gear selector on a Jeep Comanche bicycle attach?

Description : How does the rear gear selector on a Jeep Comanche bicycle attach?

Last Answer : A bike forum thread about Jeep Comanche. http://www.bikeforums.net/showthread.php?132348-jeep-comanche-tsi Here is a guy who runs a Jeep Tech website, featuring the Jeep Bikes. Here is the connect form, for I ... a thing or two. http://www.jeep-tech-tips.com/contact-me.html Hope some of this helps.

What's the best bicycle rear derailleur of all time and why?

Description : What's the best bicycle rear derailleur of all time and why?

Last Answer : answer:For my money, on a mountain bike, it's been the Shimano Deore LX. (It's gotten some alright reviews, too.) Twelve years and still going strong on my full-suspension, even when practically ... , I've always heard it was Campagnalo. But I'd also like to hear anyone's personal experience.

The car has a locked rear wheel.

Description : The back wheel of the Favorit has blocked and is not moving.

Last Answer : Take a log about 30 cm long with a diameter of 2-3 cm. (eg a long extension from the Gola set) Lean it against the brake drum through a hole in the disc and tap it with a larger hammer. ... The brake will release at 90 percent. All this on a car with the parking brake enabled and number one engaged.

Is my 2016 Chrysler Town and Country front or rear wheel drive?

Description : Is my 2016 Chrysler Town and Country front or rear wheel drive?

Last Answer : A 2016 Chrysler Town and Country is front wheel drive.

Front and rear wheel axle bearings may be washed and replaced once in a) four years b) three years c) two years d) one year

Description : Front and rear wheel axle bearings may be washed and replaced once in a) four years b) three years c) two years d) one year

Last Answer : d) one year

pressure should be less in rear wheel as compare to front wheel because of a) high traction b) low draft c) high draft d) none of these Ans. a

Description : pressure should be less in rear wheel as compare to front wheel because of a) high traction b) low draft c) high draft d) none of these Ans. a

Last Answer : ans a

Handbrake is applicable to A. Only front wheels B. Only rear wheels C. Both front and rear wheel. D. All of the above.

Description : Handbrake is applicable to A. Only front wheels B. Only rear wheels C. Both front and rear wheel. D. All of the above.

Last Answer : B. Only rear wheels

Sketch a layout of Front Engine Rear Wheel Drive vehicle & label the major parts

Description : Sketch a layout of Front Engine Rear Wheel Drive vehicle & label the major parts

Last Answer : Fig:- Front EngineRear Wheel Drive Vehicle Layout

The motion of a bicycle wheel is a.Curvilinear b.Translatory c.Linear d.Rotary as well as translatory e.Rotary

Description : The motion of a bicycle wheel is a.Curvilinear b.Translatory c.Linear d.Rotary as well as translatory e.Rotary

Last Answer : d. Rotary as well as translatory

What is the angle between the wheel of a bicycle and the friction of the road ?

Description : What is the angle between the wheel of a bicycle and the friction of the road ?

Last Answer : Friction always acts against the velocity of the object. Here, when the bicycle moves on a flat road, the mass of all bicycles acts downwards , at a steep 90 degree angle. This causes the ... rotational speed of a bicycle wheel is called rotational friction and the angle between them is 180 degrees.

How are the motions of a wheel of a moving bicycle and a mark on the blade of a moving electric fan different?

Description : How are the motions of a wheel of a moving bicycle and a mark on the blade of a moving electric fan different?

Last Answer : The main difference is that, while both rotate, the wheel has anadditional translational movement. That is, the entire wheel movesforward.

“The position of a Company Secretary is like that of a hub in a bicycle wheel.” This statement shows the– (A) Importance of Company Secretary (B) Rights of Company Secretary (C) Duties of Company Secretary (D) Liabilities of Company Secretary

Description : “The position of a Company Secretary is like that of a hub in a bicycle wheel.” This statement shows the– (A) Importance of Company Secretary (B) Rights of Company Secretary (C) Duties of Company Secretary (D) Liabilities of Company Secretary

Last Answer : Answer: Importance of Company Secretary

The spokes used in the wheel of a bicycle increase its – (1) Moment of inertia (2) Velocity (3) Acceleration (4) Momentum

Description : The spokes used in the wheel of a bicycle increase its – (1) Moment of inertia (2) Velocity (3) Acceleration (4) Momentum

Last Answer : (1) Moment of inertia Explanation: A spoke is one of some number of rods radiating from the center of a wheel (the hub where the axle connects), connecting the hub with the round ... synthetic fibers, are also occasionally used. Metal spokes used in bicycles also increase the moment of inertia.

The spokes used in the wheel of a bicycle increase its (1) Moment of inertia (2) Velocity (3) Acceleration (4) Momentum

Description : The spokes used in the wheel of a bicycle increase its (1) Moment of inertia (2) Velocity (3) Acceleration (4) Momentum

Last Answer : Moment of inertia

How do you measure the dimension of chain sprocket?

Description : How do you measure the dimension of chain sprocket?

Last Answer : External diameter, internal diameter, and tooth count.

The commonly used power transmission system in ferti seed drills are: a) China-sprocket and gears b) Gears and belt pulleys c) Belt pulleys and cams d) Belt pulleys and chain sprocket

Description : The commonly used power transmission system in ferti seed drills are: a) China-sprocket and gears b) Gears and belt pulleys c) Belt pulleys and cams d) Belt pulleys and chain sprocket

Last Answer : d) Belt pulleys and chain sprocket

ate of wear chain drive system a) Directly related to speed of chain b) Inversely related to size of sprocket of chain length c) Both (a) and (b) d) None of the above

Description : ate of wear chain drive system a) Directly related to speed of chain b) Inversely related to size of sprocket of chain length c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

A closed system is one in which heat and work crosses the boundary of the system but the mass of the working substance does not crosses the boundary of the system.  A. Yes  B. No

Description : A closed system is one in which heat and work crosses the boundary of the system but the mass of the working substance does not crosses the boundary of the system.  A. Yes  B. No

Last Answer : Answer: A

A process, in which the temperature of the working substance remains constant during its expansion or compression, is called  A. isothermal process  B. hyperbolic process  C. adiabatic process  D. polytropic process

Description : A process, in which the temperature of the working substance remains constant during its expansion or compression, is called  A. isothermal process  B. hyperbolic process  C. adiabatic process  D. polytropic process

Last Answer : Answer: A

The thermodynamic difference between a Rankine cycle working with saturated steam and the Carnot cycle is that  (a) carnot cycle can’t work with saturated steam  (b) heat is supplied to water at temperature below the maximum temperature of the cycle  (c) a rankine cycle receives heat at two places  (d) rankine cycle is hypothetical  (e) none of the above.

Description : The thermodynamic difference between a Rankine cycle working with saturated steam and the Carnot cycle is that  (a) carnot cycle can't work with saturated steam  (b) heat is supplied to water at temperature ... heat at two places  (d) rankine cycle is hypothetical  (e) none of the above.

Last Answer : Answer : b

The efficiency of a Carnot engine depends on  (a) working substance  (b) design of engine  (c) size of engine  (d) type of fuel fired  (e) temperatures of source and sink.

Description : The efficiency of a Carnot engine depends on  (a) working substance  (b) design of engine  (c) size of engine  (d) type of fuel fired  (e) temperatures of source and sink.

Last Answer : Answer : e

A manufacturer claims to have a heat engine capable of developing 20 h.p. by receiving heat input of 400 kcal/mt and working between the temperature limits of 227° C and 27° C. His claim is  (a) justified  (b) not possible  (c) may be possible with lot of sophistications  (d) cost will be very high  (e) theroretically possible.

Description : A manufacturer claims to have a heat engine capable of developing 20 h.p. by receiving heat input of 400 kcal/mt and working between the temperature limits of 227° C and 27° C. His claim is  ( ... be possible with lot of sophistications  (d) cost will be very high  (e) theroretically possible.

Last Answer : Answer : b

If heat be exchanged in a reversible manner, which of the following property of the working substance will change accordingly  (a) temperature  (b) enthalpy  (c) internal energy  (d) entropy  (e) all of the above.

Description : If heat be exchanged in a reversible manner, which of the following property of the working substance will change accordingly  (a) temperature  (b) enthalpy  (c) internal energy  (d) entropy  (e) all of the above.

Last Answer : Answer : d

Carnot cycle efficiency depends upon  (a) properties of the medium/substance used  (b) condition of engine  (c) working condition  (d) temperature range of operation  (e) effectiveness of insulating material around the engine.

Description : Carnot cycle efficiency depends upon  (a) properties of the medium/substance used  (b) condition of engine  (c) working condition  (d) temperature range of operation  (e) effectiveness of insulating material around the engine.

Last Answer : Answer : d

For a thermodynamic process to be reversible, the temperature difference between hot body and working substance should be  (a) zero  (b) minimum  (d) maximum  (d) infinity  (e) there is no such criterion.

Description : For a thermodynamic process to be reversible, the temperature difference between hot body and working substance should be  (a) zero  (b) minimum  (d) maximum  (d) infinity  (e) there is no such criterion.

Last Answer : Answer : a

In order that a cycle be reversible, following must be satisfied  (a) free expansion or friction resisted expansion/compression process should not be encountered  (b) when heat is being absorbed, temperature of hot source and working sub¬stance should be same  (c) when beat is being rejected, temperature of cold source and working sub-stance should be same  (d) all of the above  (e) none of the above.

Description : In order that a cycle be reversible, following must be satisfied  (a) free expansion or friction resisted expansion/compression process should not be encountered  (b) when heat is being absorbed, temperature of hot ... sub-stance should be same  (d) all of the above  (e) none of the above.

Last Answer : Answer : d

Why might my rear wiper blade have stopped working?

Description : Why might my rear wiper blade have stopped working?

Last Answer : It will need to go into the shop is my guess. I rarely used my rear wiper so it would not be that horrible to have to do without it for a while. Your vehicle may actually need the rear wiper. ... working due to not having a blade in it, call a dealership and ask them or check your owner manual.

Explain The Nomenclature Of A 6203-zz Bearing?

Description : Explain The Nomenclature Of A 6203-zz Bearing?

Last Answer : 6 is the type code, which shows it is a single-row ball bearing, 2 is the series, means light, 03 is the bore, which is 17 mm and ZZ is the suffix meaning double shielded bearing.

Explain Otto Cycle?

Description : Explain Otto Cycle?

Last Answer : Otto cycle can be explained by a pressure volume relationship diagram. It shows the functioning cycle of a four stroke engine. The cycle starts with an intake stroke, closing the intake and moving to ... heat is rejected and the exhaust stroke. It was designed by Nicolas Otto, a German engineer.

Explain The Second Law Of Thermodynamics?

Description : Explain The Second Law Of Thermodynamics?

Last Answer : The entropy of the universe increases over time and moves towards a maximum value.

Explain The Following Terms: Isolated System, Open System And Closed System And Give Example Where Ever Possible.?

Description : Explain The Following Terms: Isolated System, Open System And Closed System And Give Example Where Ever Possible.?

Last Answer : 1. Isolated system: A system that can neither exchange matter nor heat with the surrounding is known as an isolated system. For example: Water placed in a vessel that is closed as well as insulated. ... is said to be a closed system. For example: A reaction taking place in a closed metallic vessel.

Explain The Laws Of Thermodynamics.?

Description : Explain The Laws Of Thermodynamics.?

Last Answer : 1. Zeroth law: If any two systems are in thermal equilibrium with the third system, then they are also in thermal equilibrium with each other. 2. First law: First law of thermodynamic states that ... that The entropy of a perfect crystal of each element and a compound is zero at absolute zero.

Depth of working of a tillage implement is controlled by a) Furrow Wheel b) Gauge Wheel c) Cage Wheel d) Star Wheel

Description : Depth of working of a tillage implement is controlled by a) Furrow Wheel b) Gauge Wheel c) Cage Wheel d) Star Wheel

Last Answer : d) Star Wheel

In centrifugal pump operation, the cavitation can be eliminated by maintaining suction pressure __________ the vapor pressure of the liquid at the suction temperature. (A) Lower than (B) Higher than (C) Equal to (D) None of these

Description : In centrifugal pump operation, the cavitation can be eliminated by maintaining suction pressure __________ the vapor pressure of the liquid at the suction temperature. (A) Lower than (B) Higher than (C) Equal to (D) None of these

Last Answer : (B) Higher than

What Is The Function Of Forebay?

Description : What Is The Function Of Forebay?

Last Answer : Forebay is considered as naturally provided surge tank. It is temporary water storage when the load on the plant is reduced and provides water for initial increment on increasing load.

What Is The Use Of Surge Tank?

Description : What Is The Use Of Surge Tank?

Last Answer : The surge tank is used to provide better regulation of water pressure in the system. The surge tank controls the water when the load on the turbine decreases and supplies water when the ... variations resulting from the rapid changes in water flow in penstock and hence prevents water hammer.

Why Trash Rack Is Used?

Description : Why Trash Rack Is Used?

Last Answer : The trash rack is used to prevent the entry of debris, which might damage the turbine runners and chock up the nozzle of impulse turbine.

What Is The Main Purpose Of The Dam?

Description : What Is The Main Purpose Of The Dam?

Last Answer : The main purpose of the dam is to increase the height of water level and also to increase the working head of the hydraulic power plant.

What Is The Main Purpose Of The Reservoir?

Description : What Is The Main Purpose Of The Reservoir?

Last Answer : The main purpose of reservoir is to store water received from catchments areas during the rainy seasons and supply the same during the dry season.

What Consists Of Cooling Water Circuit And Coal & Ash Circuit In Steam Power Plant?

Description : What Consists Of Cooling Water Circuit And Coal & Ash Circuit In Steam Power Plant?

Last Answer : The cooling water circuit consists of a pump, condenser and cooling tower. The coal and ash circuit consists of coal delivery, preparation of coal, handling of coal to the boiler furnace, ash handling and ash storage.

What Consists Of Feed Water And Steam Flow Circuit In Steam Power?

Description : What Consists Of Feed Water And Steam Flow Circuit In Steam Power?

Last Answer : The feed water and steam flow circuit consists of feed pump, economizer boiler drum super heater, turbine and condenser.

What Consists Of Air And Flue Gas Circuit?

Description : What Consists Of Air And Flue Gas Circuit?

Last Answer : Air and flue gas circuit consists of forced draught fan, air preheater, boiler, furnace, superheater, economizer, dust collector, induced draught fan and chimney.

Name The Four Major Circuits In Steam Power Plant?

Description : Name The Four Major Circuits In Steam Power Plant?

Last Answer :  Coal and ash circuit  Air and flue gas circuit  Feed water and steam circuit  Cooling water circuit

What Is Ductile-brittle Transition Temperature?

Description : What Is Ductile-brittle Transition Temperature?

Last Answer : It is the temperature below which the tendency of a material to fracture increases rather than forming. Below this temperature the material loses its ductility. It is also called Nil Ductility Temperature

Define Torque.?

Description : Define Torque.?

Last Answer : Torque is defined as a force applied to an object that results in rotational motion.

What Is Annealing?

Description : What Is Annealing?

Last Answer : It is a process of heating a material above the re-crystallization temperature and cooling after a specific time interval. This increases the hardness and strength if the material.

What Is Gear Ratio?

Description : What Is Gear Ratio?

Last Answer : It is the ratio of the number of revolutions of the pinion gear to one revolution of the idler gear.