The coefficient of fluctuation of speed of Flywheel is given by 1. (N1-N2)/N 2. (N1+N2)/N 3. (N1-N2) x N

The coefficient of fluctuation of speed of Flywheel is given by

1. (N1-N2)/N

2. (N1+N2)/N

3. (N1-N2) x N
by

1 Answer

Answer :

1. (N1-N2)/N
by

Related questions

The coefficient of fluctuation of speed of flywheel is given by, (A) (ωmax - ωmin)/ω (B) 2 (ωmax - ωmin)/ (ωmax + ωmin) (C) 2 (nmax - nmin)/ (nmax + nmin) (D) Any one of the above

Description : The coefficient of fluctuation of speed of flywheel is given by, (A) (ωmax - ωmin)/ω (B) 2 (ωmax - ωmin)/ (ωmax + ωmin) (C) 2 (nmax - nmin)/ (nmax + nmin) (D) Any one of the above

Last Answer : (D) Any one of the above

The coefficient of fluctuation of speed of flywheel is 1. ratio of maximum and minimum speeds during the cycle 2. ratio of maximum fluctuation of speed to the mean speed 3. ratio of mean speed to maximum fluctuation of speed during the cycle 4. sum of maximum fluctuation of speed and the mean speed

Description : The coefficient of fluctuation of speed of flywheel is 1. ratio of maximum and minimum speeds during the cycle 2. ratio of maximum fluctuation of speed to the mean speed 3. ratio of mean ... maximum fluctuation of speed during the cycle 4. sum of maximum fluctuation of speed and the mean speed

Last Answer : 2. ratio of maximum fluctuation of speed to the mean speed

The coefficient of fluctuation of speed of flywheel is, (A) Ratio of maximum and minimum speeds during the cycle (B) Ratio of maximum fluctuation of speed to the mean speed (C) Ratio of mean speed to maximum fluctuation of speed during the cycle (D) Sum of maximum fluctuation of speed and the mean speed

Description : The coefficient of fluctuation of speed of flywheel is, (A) Ratio of maximum and minimum speeds during the cycle (B) Ratio of maximum fluctuation of speed to the mean speed (C) Ratio of ... maximum fluctuation of speed during the cycle (D) Sum of maximum fluctuation of speed and the mean speed

Last Answer : (B) Ratio of maximum fluctuation of speed to the mean speed

The coefficient of fluctuation of energy of flywheel is 1. ratio of maximum fluctuation of energy to work done per cycle 2. ratio of to work done per cycle to maximum fluctuation of energy 3. difference between maximum and minimum kinetic energy during the cycle 4. ratio of maximum and minimum kinetic energy during the cycle

Description : The coefficient of fluctuation of energy of flywheel is 1. ratio of maximum fluctuation of energy to work done per cycle 2. ratio of to work done per cycle to maximum fluctuation of energy ... minimum kinetic energy during the cycle 4. ratio of maximum and minimum kinetic energy during the cycle

Last Answer : 1. ratio of maximum fluctuation of energy to work done per cycle

The coefficient of fluctuation of energy of flywheel is, (A) Ratio of maximum fluctuation of energy to work done per cycle (B) Ratio of to work done per cycle to maximum fluctuation of energy (C) Difference between maximum and minimum kinetic energy during the cycle (D) Ratio of maximum and minimum kinetic energy during the cycle

Description : The coefficient of fluctuation of energy of flywheel is, (A) Ratio of maximum fluctuation of energy to work done per cycle (B) Ratio of to work done per cycle to maximum fluctuation of ... minimum kinetic energy during the cycle (D) Ratio of maximum and minimum kinetic energy during the cycle

Last Answer : (A) Ratio of maximum fluctuation of energy to work done per cycle

A flywheel of moment of inertia 9.8kgm 2 fluctuates by 30 rpm for a fluctuation in energy of 1936 joules. The means speed of flywheel is (in rpm) 1. 600 2. 900 3. 968 4. 2940

Description : A flywheel of moment of inertia 9.8kgm 2 fluctuates by 30 rpm for a fluctuation in energy of 1936 joules. The means speed of flywheel is (in rpm) 1. 600 2. 900 3. 968 4. 2940

Last Answer : 1. 600

A flywheel connected to a punching machine has to supply energy of 400 Nm while running at a mean angular speed of 20 rad/s. If the total fluctuation of speed is not exceed to in kgm 2 is 1. 25 2. 50 3. 100 4. 125

Description : A flywheel connected to a punching machine has to supply energy of 400 Nm while running at a mean angular speed of 20 rad/s. If the total fluctuation of speed is not exceed to in kgm 2 is 1. 25 2. 50 3. 100 4. 125

Last Answer : 1. 25

A flywheel is used 1. to limit the fluctuation of speed during each cycle 2. to control the mean speed of the engine 3. to maintain a constant speed 4. to come into action when the speed varies

Description : A flywheel is used 1. to limit the fluctuation of speed during each cycle 2. to control the mean speed of the engine 3. to maintain a constant speed 4. to come into action when the speed varies

Last Answer : 1. to limit the fluctuation of speed during each cycle

The maximum fluctuation of speed of flywheel is, (A) Difference between maximum and minimum speeds during the cycle (B) Difference between maximum and mean speeds during the cycle (C) Difference between mean and minimum speeds during the cycle (D) Mean of maximum and minimum speeds during the cycle

Description : The maximum fluctuation of speed of flywheel is, (A) Difference between maximum and minimum speeds during the cycle (B) Difference between maximum and mean speeds during the cycle (C) Difference ... and minimum speeds during the cycle (D) Mean of maximum and minimum speeds during the cycle

Last Answer : (A) Difference between maximum and minimum speeds during the cycle

The maximum fluctuation of energy of flywheel is 1. difference between maximum and minimum kinetic energy during the cycle 2. difference between maximum and mean kinetic energy during the cycle 3. difference between mean and minimum kinetic energy during the cycle 4. mean of maximum and minimum kinetic energy during the cycle

Description : The maximum fluctuation of energy of flywheel is 1. difference between maximum and minimum kinetic energy during the cycle 2. difference between maximum and mean kinetic energy during the cycle 3. ... kinetic energy during the cycle 4. mean of maximum and minimum kinetic energy during the cycle

Last Answer : 1. difference between maximum and minimum kinetic energy during the cycle

The maximum fluctuation of energy of flywheel is, (A) Difference between maximum and minimum kinetic energy during the cycle (B) Difference between maximum and mean kinetic energy during the cycle (C) Difference between mean and minimum kinetic energy during the cycle (D) Mean of maximum and minimum kinetic energy during the cycle

Description : The maximum fluctuation of energy of flywheel is, (A) Difference between maximum and minimum kinetic energy during the cycle (B) Difference between maximum and mean kinetic energy during the cycle ... kinetic energy during the cycle (D) Mean of maximum and minimum kinetic energy during the cycle

Last Answer : (A) Difference between maximum and minimum kinetic energy during the cycle

Calculate the coefficient of fluctuation of speed if maximum speed is 2500rpm and minimum speed is 1800rpm. 1. 1.44 2. 1.33 3. 0.33 4. 0.44

Description : Calculate the coefficient of fluctuation of speed if maximum speed is 2500rpm and minimum speed is 1800rpm. 1. 1.44 2. 1.33 3. 0.33 4. 0.44

Last Answer : 3. 0.33

Reciprocal of coefficient of fluctuation of speed is called 1. fluctuation of energy 2. fluctuation of speed 3. maximum fluctuation of speed 4. coefficient of fluctuation of speed

Description : Reciprocal of coefficient of fluctuation of speed is called 1. fluctuation of energy 2. fluctuation of speed 3. maximum fluctuation of speed 4. coefficient of fluctuation of speed

Last Answer : 4. coefficient of fluctuation of speed

The coefficient of fluctuation of speed, when the maximum and minimum speeds are 300rpm and 290 rpm (A) 0.034 (B) 0.017 (C) 0.008 (D) 0/004

Description : The coefficient of fluctuation of speed, when the maximum and minimum speeds are 300rpm and 290 rpm (A) 0.034 (B) 0.017 (C) 0.008 (D) 0/004

Last Answer : (A) 0.034

The coefficient of fluctuation of energy = (A) Maximum fluctuation of energy / work done per cycle (B) Fluctuation of energy / Work done per cycle (C) Maximum fluctuation of energy / Mean speed (D) Fluctuation of energy / Mean speed

Description : The coefficient of fluctuation of energy = (A) Maximum fluctuation of energy / work done per cycle (B) Fluctuation of energy / Work done per cycle (C) Maximum fluctuation of energy / Mean speed (D) Fluctuation of energy / Mean speed

Last Answer : (A) Maximum fluctuation of energy / work done per cycle

Reciprocal of Coefficient of fluctuation of speed is called (A) Fluctuation of speed (B) Coefficient of steadiness (C) Maximum fluctuation of speed (D) None of the above

Description : Reciprocal of Coefficient of fluctuation of speed is called (A) Fluctuation of speed (B) Coefficient of steadiness (C) Maximum fluctuation of speed (D) None of the above

Last Answer : (B) Coefficient of steadiness

The ratio of maximum fluctuation of speed to the mean speed is called (A) Fluctuation of speed (B) Maximum fluctuation of speed (C) Coefficient of fluctuation of speed (D) None of the above

Description : The ratio of maximum fluctuation of speed to the mean speed is called (A) Fluctuation of speed (B) Maximum fluctuation of speed (C) Coefficient of fluctuation of speed (D) None of the above

Last Answer : (C) Coefficient of fluctuation of speed

The difference the maximum and minimum speeds during a cycle is called (A) Fluctuation of speed (B) Maximum fluctuation of speed (C) Coefficient of fluctuation of speed (D) None of the above

Description : The difference the maximum and minimum speeds during a cycle is called (A) Fluctuation of speed (B) Maximum fluctuation of speed (C) Coefficient of fluctuation of speed (D) None of the above

Last Answer : (B) Maximum fluctuation of speed

The Brewster angle is expressed as a) Tan -1 (n) b) Tan -1 (n1/n2) c) Tan -1 (n2/n1) d) Tan (n)

Description : The Brewster angle is expressed as a) Tan -1 (n) b) Tan -1 (n1/n2) c) Tan -1 (n2/n1) d) Tan (n)

Last Answer : c) Tan -1 (n2/n1)

The Snell’s law is given by a) N1 sin θi = N2 sin θt b) N2 sin θi = N1 sin θt c) sin θi = sin θt d) N1 cos θi = N2 cos θt

Description : The Snell’s law is given by a) N1 sin θi = N2 sin θt b) N2 sin θi = N1 sin θt c) sin θi = sin θt d) N1 cos θi = N2 cos θt

Last Answer : a) N1 sin θi = N2 sin θt

In the reaction `A^(-n2)+xe^(-)rarrA^(-n1)` . Here, x will be :

Description : In the reaction `A^(-n2)+xe^(-)rarrA^(-n1)` . Here, x will be :

Last Answer : In the reaction `A^(-n2)+xe^(-)rarrA^(-n1)` . Here, x will be : A. `n_(1)+n_(2)` B. `n_(2)-n_(1)` C. `n_(1)-n_(2)` D. `n_(1).n_(2)`

For total internal reflection to occur, which condition must be satisfied? a) N1 = N2 b) N1 > N2 c) N1 < N2 d) N1 x N2=1

Description : For total internal reflection to occur, which condition must be satisfied? a) N1 = N2 b) N1 > N2 c) N1 < N2 d) N1 x N2=1

Last Answer : b) N1 > N2

Which of the following is used to control the speed variations of the engine caused by the fluctuations of the engine turning moment? 1. D-slide valve 2. Governor 3. Flywheel 4. Meyer’s expansion valve

Description : Which of the following is used to control the speed variations of the engine caused by the fluctuations of the engine turning moment? 1. D-slide valve 2. Governor 3. Flywheel 4. Meyer’s expansion valve

Last Answer : 3. Flywheel

When the torque required by the machine is more than the torque supplied by the motor, the flywheel is (A) Accelerated (B) Retarded (C) Rotating with constant speed (D) Any of the above

Description : When the torque required by the machine is more than the torque supplied by the motor, the flywheel is (A) Accelerated (B) Retarded (C) Rotating with constant speed (D) Any of the above

Last Answer : (B) Retarded

If the load on the engine is constant, the mean speed will be constant from the cycle, then (A) The governor will not operate but flywheel will be acting (B) The flywheel will be acting but governor will not operate (C) Both flywheel and governor will be acting (D) Both flywheel and governor will not be acting

Description : If the load on the engine is constant, the mean speed will be constant from the cycle, then (A) The governor will not operate but flywheel will be acting (B) The flywheel will be acting but ... (C) Both flywheel and governor will be acting (D) Both flywheel and governor will not be acting

Last Answer : (A) The governor will not operate but flywheel will be acting

A flywheel is used, (A) To limit the fluctuations of speed during each cycle (B) To control the mean speed of the engine (C) To maintain a constant speed (D) To come into action when the speed varies

Description : A flywheel is used, (A) To limit the fluctuations of speed during each cycle (B) To control the mean speed of the engine (C) To maintain a constant speed (D) To come into action when the speed varies

Last Answer : (A) To limit the fluctuations of speed during each cycle

A flywheel is used, (A) To store and release energy when required during the work cycle (B) To reduce the power capacity of electric motor (C) To reduce the amplitude of speed fluctuations (D) Any one of above functions

Description : A flywheel is used, (A) To store and release energy when required during the work cycle (B) To reduce the power capacity of electric motor (C) To reduce the amplitude of speed fluctuations (D) Any one of above functions

Last Answer : (D) Any one of above functions

If load on the engine is constant, the mean speed will be constant and ___ will not operate. a) Flywheel b) Governor c) Both flywheel and governor d) None of the mentioned

Description : If load on the engine is constant, the mean speed will be constant and ___ will not operate. a) Flywheel b) Governor c) Both flywheel and governor d) None of the mentioned

Last Answer : b) Governor

Which of the following are functions of flywheel? a) Store and release energy during work cycle b) Reduce power capacity of the electric motor c) Reduce amplitude of speed fluctuations d) All of the listed

Description : Which of the following are functions of flywheel? a) Store and release energy during work cycle b) Reduce power capacity of the electric motor c) Reduce amplitude of speed fluctuations d) All of the listed

Last Answer : d) All of the listed

The radius of Gyration (k) for Rim Type Flywheel having radius ‘r’ is given by 1. k = 2r 2. k = r/2 3. k = r 4. k = r/3

Description : The radius of Gyration (k) for Rim Type Flywheel having radius ‘r’ is given by 1. k = 2r 2. k = r/2 3. k = r 4. k = r/3

Last Answer : 3. k = r

In case of solid disk flywheel, the mass (m) of disk is given by (A) πR 2 tρ (B) (π/2)R 2 tρ (C) 3πR 2 tρ (D) (3/2)πR 2 tρ

Description : In case of solid disk flywheel, the mass (m) of disk is given by (A) πR 2 tρ (B) (π/2)R 2 tρ (C) 3πR 2 tρ (D) (3/2)πR 2 tρ

Last Answer : (A) πR 2 tρ

The tensile stress in the rim of the flywheel is given by, Where, ρ is mass density and v is linear velocity at the mean radius of the rim. (A) ρv2/2 (B) πρv2 (C) ρv2 (D) 2 ρv2

Description : The tensile stress in the rim of the flywheel is given by, Where, ρ is mass density and v is linear velocity at the mean radius of the rim. (A) ρv2/2 (B) πρv2 (C) ρv2 (D) 2 ρv2

Last Answer : (C) ρv2

In the second system of pulleys, if there are two pulley blocks having 'n1' and 'n2' pulleys in the first and second pulley blocks respectively, then the velocity ratio of the whole system will be equal to a.2n1 + n2 b.n1 - n2 c.107 dynes d.2n1 + 2n2 e.n1 + n2

Description : In the second system of pulleys, if there are two pulley blocks having 'n1' and 'n2' pulleys in the first and second pulley blocks respectively, then the velocity ratio of the whole system will be equal to a.2n1 + n2 b.n1 - n2 c.107 dynes d.2n1 + 2n2 e.n1 + n2

Last Answer : b. n1 - n2

Multimode step-index fibers have a core and cladding of constant refractive index n1 and n2, respectively. Which refractive index, the core or cladding, is lower?

Description : Multimode step-index fibers have a core and cladding of constant refractive index n1 and n2, respectively. Which refractive index, the core or cladding, is lower?

Last Answer : Cladding.

Medium 1 is a glass (n1 = 1.5) and medium 2 is an ethyl alcohol (n2 = 1.36). For an angle of incidence of 30 degrees, determine the angle of refraction. ∙ A. 44.5 degrees ∙ B. 14.56 degrees ∙ C. 33.47 degrees ∙ D. 75 degrees

Description : Medium 1 is a glass (n1 = 1.5) and medium 2 is an ethyl alcohol (n2 = 1.36). For an angle of incidence of 30 degrees, determine the angle of refraction. ∙ A. 44.5 degrees ∙ B. 14.56 degrees ∙ C. 33.47 degrees ∙ D. 75 degrees

Last Answer : C. 33.47 degrees

Consider the formula in image processing RD = 1 - (1/CR) Where CR = n1/n2 CR is called as compression ratio n1 and n2 denotes the number of information carrying units in two datasets that represent the same information. In this situation RD is called as relative ................ of the first data set. (A) Data Compression (B) Data Redundancy (C) Data Relation (D) Data Representation

Description : Consider the formula in image processing RD = 1 - (1/CR) Where CR = n1/n2 CR is called as compression ratio n1 and n2 denotes the number of information carrying units in two datasets that represent ... . (A) Data Compression (B) Data Redundancy (C) Data Relation (D) Data Representation

Last Answer : (B) Data Redundancy

Which of the following is used to determine the specificity of requirements ? (A) n1/n2 (B) n2/n1 (C) n1+n2 (D) n1–n2 Where n1 is the number of requirements for which all reviewers have identical interpretations, n2 is number of requirements in a specification.

Description : Which of the following is used to determine the specificity of requirements ? (A) n1/n2 (B) n2/n1 (C) n1+n2 (D) n1–n2 Where n1 is the number of requirements for which all reviewers have identical interpretations, n2 is number of requirements in a specification.

Last Answer : (A) n1/n2 

Consider tile following statements: [IES-1993; 2002; 2006] Radius of friction circle for a journal bearing depends upon 1. Coefficient of friction 2. Radius of the journal 3. Angular speed of rotation of the shaft Which of the statements given above are correct? (a) 1,2 and 3 (b) Only 1 and 2 (c) Only 2 and 3 (d) Only 1 and 3

Description : Consider tile following statements: [IES-1993; 2002; 2006] Radius of friction circle for a journal bearing depends upon 1. Coefficient of friction 2. Radius of the journal 3. Angular speed of rotation of the shaft Which of the ... ) 1,2 and 3 (b) Only 1 and 2 (c) Only 2 and 3 (d) Only 1 and 3

Last Answer : (b) Only 1 and 2

Increase in values of which of the following results in an increase of the coefficient of friction in a hydrodynamic bearing? [IES 2007] 1. Viscosity of the oil. 2. Clearance between shaft and bearing. 3. Shaft speed. Select the using the code given below: (a) 1 and 2 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3

Description : Increase in values of which of the following results in an increase of the coefficient of friction in a hydrodynamic bearing? [IES 2007] 1. Viscosity of the oil. 2. Clearance between shaft and bearing. 3. Shaft speed. Select the ... 1 and 2 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3

Last Answer : (b) 1 and 3 only

Maximum fluctuation of energy = 1. Max KE – Min KE 2. Max KE + Min KE 3. Max KE > Min KE 4. Max KE < Min KE

Description : Maximum fluctuation of energy = 1. Max KE – Min KE 2. Max KE + Min KE 3. Max KE > Min KE 4. Max KE < Min KE

Last Answer : 1. Max KE – Min KE

Maximum fluctuation of energy = (A) Max. KE – Min. KE (B) Max. KE + Min. KE (C) (Max. KE – Min. KE)/2 (D) (Max. KE + Min. KE)/2

Description : Maximum fluctuation of energy = (A) Max. KE – Min. KE (B) Max. KE + Min. KE (C) (Max. KE – Min. KE)/2 (D) (Max. KE + Min. KE)/2

Last Answer : (A) Max. KE – Min. KE

Flywheel absorbs energy during those periods of crank rotation when 1. The twisting moment is greater than the resisting moment 2. The twisting moment is equal to the resisting moment 3. The twisting moment is less than resisting moment 4. The load on engine falls

Description : Flywheel absorbs energy during those periods of crank rotation when 1. The twisting moment is greater than the resisting moment 2. The twisting moment is equal to the resisting moment 3. The twisting moment is less than resisting moment 4. The load on engine falls

Last Answer : 1. The twisting moment is greater than the resisting moment

In a flywheel the safe stress is 25.2MN/m 2 and the density is 7 g/cm 3 . Then what is the maximum peripheral velocity ? 1. 30m/s 2. 45m/s 3. 60m/s 4. 120m/s

Description : In a flywheel the safe stress is 25.2MN/m 2 and the density is 7 g/cm 3 . Then what is the maximum peripheral velocity ? 1. 30m/s 2. 45m/s 3. 60m/s 4. 120m/s

Last Answer : 3. 60m/s

When the driving torque is more than load torque, flywheel is ______ 1. Accelerated 2. Decelerated 3. Constant velocity 4. Can’t be determined

Description : When the driving torque is more than load torque, flywheel is ______ 1. Accelerated 2. Decelerated 3. Constant velocity 4. Can’t be determined

Last Answer : 1. Accelerated

A circular solid of uniform thickness 20 mm, radius 200 mm and mass 20 kg, is used as a flywheel. If it rotates at 600 rpm, the kinetic energy of the flywheel, in joules is 1. 395 2. 790 3. 1580 4. 3160

Description : A circular solid of uniform thickness 20 mm, radius 200 mm and mass 20 kg, is used as a flywheel. If it rotates at 600 rpm, the kinetic energy of the flywheel, in joules is 1. 395 2. 790 3. 1580 4. 3160

Last Answer : 2. 790

Split flywheel is made to 1. avoid cooling stress 2. reduce weight 3. increase weight 4. maximize large centrifugal force

Description : Split flywheel is made to 1. avoid cooling stress 2. reduce weight 3. increase weight 4. maximize large centrifugal force

Last Answer : 1. avoid cooling stress

The flywheel is accelerate when 1. driving torque > load torque 2. driving torque < load torque 3. driving torque = load torque 4. driving torque / load torque

Description : The flywheel is accelerate when 1. driving torque > load torque 2. driving torque < load torque 3. driving torque = load torque 4. driving torque / load torque

Last Answer : 1. driving torque > load torque

Energy stored in flywheel in the form of 1. heat energy 2. kinetic energy 3. solar energy 4. thermal energy

Description : Energy stored in flywheel in the form of 1. heat energy 2. kinetic energy 3. solar energy 4. thermal energy

Last Answer : 2. kinetic energy

In vehicle flywheel is place between 1. clutch and propeller shaft 2. engine and clutch 3. before engine 4. propeller shaft and differential

Description : In vehicle flywheel is place between 1. clutch and propeller shaft 2. engine and clutch 3. before engine 4. propeller shaft and differential

Last Answer : 2. engine and clutch