A flywheel is used 1. to limit the fluctuation of speed during each cycle 2. to control the mean speed of the engine 3. to maintain a constant speed 4. to come into action when the speed varies

A flywheel is used

1. to limit the fluctuation of speed during each cycle

2. to control the mean speed of the engine

3. to maintain a constant speed

4. to come into action when the speed varies
by

1 Answer

Answer :

1. to limit the fluctuation of speed during each cycle
by

Related questions

A flywheel is used, (A) To limit the fluctuations of speed during each cycle (B) To control the mean speed of the engine (C) To maintain a constant speed (D) To come into action when the speed varies

Description : A flywheel is used, (A) To limit the fluctuations of speed during each cycle (B) To control the mean speed of the engine (C) To maintain a constant speed (D) To come into action when the speed varies

Last Answer : (A) To limit the fluctuations of speed during each cycle

The coefficient of fluctuation of speed of flywheel is 1. ratio of maximum and minimum speeds during the cycle 2. ratio of maximum fluctuation of speed to the mean speed 3. ratio of mean speed to maximum fluctuation of speed during the cycle 4. sum of maximum fluctuation of speed and the mean speed

Description : The coefficient of fluctuation of speed of flywheel is 1. ratio of maximum and minimum speeds during the cycle 2. ratio of maximum fluctuation of speed to the mean speed 3. ratio of mean ... maximum fluctuation of speed during the cycle 4. sum of maximum fluctuation of speed and the mean speed

Last Answer : 2. ratio of maximum fluctuation of speed to the mean speed

The coefficient of fluctuation of speed of flywheel is, (A) Ratio of maximum and minimum speeds during the cycle (B) Ratio of maximum fluctuation of speed to the mean speed (C) Ratio of mean speed to maximum fluctuation of speed during the cycle (D) Sum of maximum fluctuation of speed and the mean speed

Description : The coefficient of fluctuation of speed of flywheel is, (A) Ratio of maximum and minimum speeds during the cycle (B) Ratio of maximum fluctuation of speed to the mean speed (C) Ratio of ... maximum fluctuation of speed during the cycle (D) Sum of maximum fluctuation of speed and the mean speed

Last Answer : (B) Ratio of maximum fluctuation of speed to the mean speed

The maximum fluctuation of speed of flywheel is, (A) Difference between maximum and minimum speeds during the cycle (B) Difference between maximum and mean speeds during the cycle (C) Difference between mean and minimum speeds during the cycle (D) Mean of maximum and minimum speeds during the cycle

Description : The maximum fluctuation of speed of flywheel is, (A) Difference between maximum and minimum speeds during the cycle (B) Difference between maximum and mean speeds during the cycle (C) Difference ... and minimum speeds during the cycle (D) Mean of maximum and minimum speeds during the cycle

Last Answer : (A) Difference between maximum and minimum speeds during the cycle

The maximum fluctuation of energy of flywheel is 1. difference between maximum and minimum kinetic energy during the cycle 2. difference between maximum and mean kinetic energy during the cycle 3. difference between mean and minimum kinetic energy during the cycle 4. mean of maximum and minimum kinetic energy during the cycle

Description : The maximum fluctuation of energy of flywheel is 1. difference between maximum and minimum kinetic energy during the cycle 2. difference between maximum and mean kinetic energy during the cycle 3. ... kinetic energy during the cycle 4. mean of maximum and minimum kinetic energy during the cycle

Last Answer : 1. difference between maximum and minimum kinetic energy during the cycle

The maximum fluctuation of energy of flywheel is, (A) Difference between maximum and minimum kinetic energy during the cycle (B) Difference between maximum and mean kinetic energy during the cycle (C) Difference between mean and minimum kinetic energy during the cycle (D) Mean of maximum and minimum kinetic energy during the cycle

Description : The maximum fluctuation of energy of flywheel is, (A) Difference between maximum and minimum kinetic energy during the cycle (B) Difference between maximum and mean kinetic energy during the cycle ... kinetic energy during the cycle (D) Mean of maximum and minimum kinetic energy during the cycle

Last Answer : (A) Difference between maximum and minimum kinetic energy during the cycle

The coefficient of fluctuation of energy of flywheel is 1. ratio of maximum fluctuation of energy to work done per cycle 2. ratio of to work done per cycle to maximum fluctuation of energy 3. difference between maximum and minimum kinetic energy during the cycle 4. ratio of maximum and minimum kinetic energy during the cycle

Description : The coefficient of fluctuation of energy of flywheel is 1. ratio of maximum fluctuation of energy to work done per cycle 2. ratio of to work done per cycle to maximum fluctuation of energy ... minimum kinetic energy during the cycle 4. ratio of maximum and minimum kinetic energy during the cycle

Last Answer : 1. ratio of maximum fluctuation of energy to work done per cycle

The coefficient of fluctuation of energy of flywheel is, (A) Ratio of maximum fluctuation of energy to work done per cycle (B) Ratio of to work done per cycle to maximum fluctuation of energy (C) Difference between maximum and minimum kinetic energy during the cycle (D) Ratio of maximum and minimum kinetic energy during the cycle

Description : The coefficient of fluctuation of energy of flywheel is, (A) Ratio of maximum fluctuation of energy to work done per cycle (B) Ratio of to work done per cycle to maximum fluctuation of ... minimum kinetic energy during the cycle (D) Ratio of maximum and minimum kinetic energy during the cycle

Last Answer : (A) Ratio of maximum fluctuation of energy to work done per cycle

If the load on the engine is constant, the mean speed will be constant from the cycle, then (A) The governor will not operate but flywheel will be acting (B) The flywheel will be acting but governor will not operate (C) Both flywheel and governor will be acting (D) Both flywheel and governor will not be acting

Description : If the load on the engine is constant, the mean speed will be constant from the cycle, then (A) The governor will not operate but flywheel will be acting (B) The flywheel will be acting but ... (C) Both flywheel and governor will be acting (D) Both flywheel and governor will not be acting

Last Answer : (A) The governor will not operate but flywheel will be acting

A flywheel connected to a punching machine has to supply energy of 400 Nm while running at a mean angular speed of 20 rad/s. If the total fluctuation of speed is not exceed to in kgm 2 is 1. 25 2. 50 3. 100 4. 125

Description : A flywheel connected to a punching machine has to supply energy of 400 Nm while running at a mean angular speed of 20 rad/s. If the total fluctuation of speed is not exceed to in kgm 2 is 1. 25 2. 50 3. 100 4. 125

Last Answer : 1. 25

A flywheel of moment of inertia 9.8kgm 2 fluctuates by 30 rpm for a fluctuation in energy of 1936 joules. The means speed of flywheel is (in rpm) 1. 600 2. 900 3. 968 4. 2940

Description : A flywheel of moment of inertia 9.8kgm 2 fluctuates by 30 rpm for a fluctuation in energy of 1936 joules. The means speed of flywheel is (in rpm) 1. 600 2. 900 3. 968 4. 2940

Last Answer : 1. 600

The coefficient of fluctuation of speed of Flywheel is given by 1. (N1-N2)/N 2. (N1+N2)/N 3. (N1-N2) x N

Description : The coefficient of fluctuation of speed of Flywheel is given by 1. (N1-N2)/N 2. (N1+N2)/N 3. (N1-N2) x N

Last Answer : 1. (N1-N2)/N

The coefficient of fluctuation of speed of flywheel is given by, (A) (ωmax - ωmin)/ω (B) 2 (ωmax - ωmin)/ (ωmax + ωmin) (C) 2 (nmax - nmin)/ (nmax + nmin) (D) Any one of the above

Description : The coefficient of fluctuation of speed of flywheel is given by, (A) (ωmax - ωmin)/ω (B) 2 (ωmax - ωmin)/ (ωmax + ωmin) (C) 2 (nmax - nmin)/ (nmax + nmin) (D) Any one of the above

Last Answer : (D) Any one of the above

If load on the engine is constant, the mean speed will be constant and ___ will not operate. a) Flywheel b) Governor c) Both flywheel and governor d) None of the mentioned

Description : If load on the engine is constant, the mean speed will be constant and ___ will not operate. a) Flywheel b) Governor c) Both flywheel and governor d) None of the mentioned

Last Answer : b) Governor

The difference the maximum and minimum speeds during a cycle is called (A) Fluctuation of speed (B) Maximum fluctuation of speed (C) Coefficient of fluctuation of speed (D) None of the above

Description : The difference the maximum and minimum speeds during a cycle is called (A) Fluctuation of speed (B) Maximum fluctuation of speed (C) Coefficient of fluctuation of speed (D) None of the above

Last Answer : (B) Maximum fluctuation of speed

Which of the following is used to control the speed variations of the engine caused by the fluctuations of the engine turning moment? 1. D-slide valve 2. Governor 3. Flywheel 4. Meyer’s expansion valve

Description : Which of the following is used to control the speed variations of the engine caused by the fluctuations of the engine turning moment? 1. D-slide valve 2. Governor 3. Flywheel 4. Meyer’s expansion valve

Last Answer : 3. Flywheel

The coefficient of fluctuation of energy = (A) Maximum fluctuation of energy / work done per cycle (B) Fluctuation of energy / Work done per cycle (C) Maximum fluctuation of energy / Mean speed (D) Fluctuation of energy / Mean speed

Description : The coefficient of fluctuation of energy = (A) Maximum fluctuation of energy / work done per cycle (B) Fluctuation of energy / Work done per cycle (C) Maximum fluctuation of energy / Mean speed (D) Fluctuation of energy / Mean speed

Last Answer : (A) Maximum fluctuation of energy / work done per cycle

A flywheel is used, (A) To store and release energy when required during the work cycle (B) To reduce the power capacity of electric motor (C) To reduce the amplitude of speed fluctuations (D) Any one of above functions

Description : A flywheel is used, (A) To store and release energy when required during the work cycle (B) To reduce the power capacity of electric motor (C) To reduce the amplitude of speed fluctuations (D) Any one of above functions

Last Answer : (D) Any one of above functions

Which of the following are functions of flywheel? a) Store and release energy during work cycle b) Reduce power capacity of the electric motor c) Reduce amplitude of speed fluctuations d) All of the listed

Description : Which of the following are functions of flywheel? a) Store and release energy during work cycle b) Reduce power capacity of the electric motor c) Reduce amplitude of speed fluctuations d) All of the listed

Last Answer : d) All of the listed

When the torque required by the machine is more than the torque supplied by the motor, the flywheel is (A) Accelerated (B) Retarded (C) Rotating with constant speed (D) Any of the above

Description : When the torque required by the machine is more than the torque supplied by the motor, the flywheel is (A) Accelerated (B) Retarded (C) Rotating with constant speed (D) Any of the above

Last Answer : (B) Retarded

Flywheel absorbs energy during those periods of crank rotation when 1. The twisting moment is greater than the resisting moment 2. The twisting moment is equal to the resisting moment 3. The twisting moment is less than resisting moment 4. The load on engine falls

Description : Flywheel absorbs energy during those periods of crank rotation when 1. The twisting moment is greater than the resisting moment 2. The twisting moment is equal to the resisting moment 3. The twisting moment is less than resisting moment 4. The load on engine falls

Last Answer : 1. The twisting moment is greater than the resisting moment

The ratio of maximum fluctuation of speed to the mean speed is called (A) Fluctuation of speed (B) Maximum fluctuation of speed (C) Coefficient of fluctuation of speed (D) None of the above

Description : The ratio of maximum fluctuation of speed to the mean speed is called (A) Fluctuation of speed (B) Maximum fluctuation of speed (C) Coefficient of fluctuation of speed (D) None of the above

Last Answer : (C) Coefficient of fluctuation of speed

In vehicle flywheel is place between 1. clutch and propeller shaft 2. engine and clutch 3. before engine 4. propeller shaft and differential

Description : In vehicle flywheel is place between 1. clutch and propeller shaft 2. engine and clutch 3. before engine 4. propeller shaft and differential

Last Answer : 2. engine and clutch

In vehicles, flywheel is placed in between (A) Engine and clutch (B) Clutch and Propeller shaft (C) Propeller shaft and Differential (D) Before engine

Description : In vehicles, flywheel is placed in between (A) Engine and clutch (B) Clutch and Propeller shaft (C) Propeller shaft and Differential (D) Before engine

Last Answer : (A) Engine and clutch

Calculate the coefficient of fluctuation of speed if maximum speed is 2500rpm and minimum speed is 1800rpm. 1. 1.44 2. 1.33 3. 0.33 4. 0.44

Description : Calculate the coefficient of fluctuation of speed if maximum speed is 2500rpm and minimum speed is 1800rpm. 1. 1.44 2. 1.33 3. 0.33 4. 0.44

Last Answer : 3. 0.33

Reciprocal of coefficient of fluctuation of speed is called 1. fluctuation of energy 2. fluctuation of speed 3. maximum fluctuation of speed 4. coefficient of fluctuation of speed

Description : Reciprocal of coefficient of fluctuation of speed is called 1. fluctuation of energy 2. fluctuation of speed 3. maximum fluctuation of speed 4. coefficient of fluctuation of speed

Last Answer : 4. coefficient of fluctuation of speed

The coefficient of fluctuation of speed, when the maximum and minimum speeds are 300rpm and 290 rpm (A) 0.034 (B) 0.017 (C) 0.008 (D) 0/004

Description : The coefficient of fluctuation of speed, when the maximum and minimum speeds are 300rpm and 290 rpm (A) 0.034 (B) 0.017 (C) 0.008 (D) 0/004

Last Answer : (A) 0.034

Reciprocal of Coefficient of fluctuation of speed is called (A) Fluctuation of speed (B) Coefficient of steadiness (C) Maximum fluctuation of speed (D) None of the above

Description : Reciprocal of Coefficient of fluctuation of speed is called (A) Fluctuation of speed (B) Coefficient of steadiness (C) Maximum fluctuation of speed (D) None of the above

Last Answer : (B) Coefficient of steadiness

When the driving torque is more than load torque, flywheel is ______ 1. Accelerated 2. Decelerated 3. Constant velocity 4. Can’t be determined

Description : When the driving torque is more than load torque, flywheel is ______ 1. Accelerated 2. Decelerated 3. Constant velocity 4. Can’t be determined

Last Answer : 1. Accelerated

When the driving torque is more than load torque, flywheel is ______ a) Accelerated b) Decelerated c) Constant velocity d) Can’t be determined

Description : When the driving torque is more than load torque, flywheel is ______ a) Accelerated b) Decelerated c) Constant velocity d) Can’t be determined

Last Answer : a) Accelerated

For an elliptical hole on a flat plate, if width of the hole in direction of the load decrease, Stress Concentration Factor will______ a) Increase b) Decrease c) Remains constant d) Can’t be determined. Varies from material to material

Description : For an elliptical hole on a flat plate, if width of the hole in direction of the load decrease, Stress Concentration Factor will______ a) Increase b) Decrease c) Remains constant d) Can’t be determined. Varies from material to material

Last Answer : a) Increase

Maximum fluctuation of energy = 1. Max KE – Min KE 2. Max KE + Min KE 3. Max KE > Min KE 4. Max KE < Min KE

Description : Maximum fluctuation of energy = 1. Max KE – Min KE 2. Max KE + Min KE 3. Max KE > Min KE 4. Max KE < Min KE

Last Answer : 1. Max KE – Min KE

Maximum fluctuation of energy = (A) Max. KE – Min. KE (B) Max. KE + Min. KE (C) (Max. KE – Min. KE)/2 (D) (Max. KE + Min. KE)/2

Description : Maximum fluctuation of energy = (A) Max. KE – Min. KE (B) Max. KE + Min. KE (C) (Max. KE – Min. KE)/2 (D) (Max. KE + Min. KE)/2

Last Answer : (A) Max. KE – Min. KE

The tensile stress in the rim of the flywheel is given by, Where, ρ is mass density and v is linear velocity at the mean radius of the rim. (A) ρv2/2 (B) πρv2 (C) ρv2 (D) 2 ρv2

Description : The tensile stress in the rim of the flywheel is given by, Where, ρ is mass density and v is linear velocity at the mean radius of the rim. (A) ρv2/2 (B) πρv2 (C) ρv2 (D) 2 ρv2

Last Answer : (C) ρv2

In a flywheel the safe stress is 25.2MN/m 2 and the density is 7 g/cm 3 . Then what is the maximum peripheral velocity ? 1. 30m/s 2. 45m/s 3. 60m/s 4. 120m/s

Description : In a flywheel the safe stress is 25.2MN/m 2 and the density is 7 g/cm 3 . Then what is the maximum peripheral velocity ? 1. 30m/s 2. 45m/s 3. 60m/s 4. 120m/s

Last Answer : 3. 60m/s

The radius of Gyration (k) for Rim Type Flywheel having radius ‘r’ is given by 1. k = 2r 2. k = r/2 3. k = r 4. k = r/3

Description : The radius of Gyration (k) for Rim Type Flywheel having radius ‘r’ is given by 1. k = 2r 2. k = r/2 3. k = r 4. k = r/3

Last Answer : 3. k = r

A circular solid of uniform thickness 20 mm, radius 200 mm and mass 20 kg, is used as a flywheel. If it rotates at 600 rpm, the kinetic energy of the flywheel, in joules is 1. 395 2. 790 3. 1580 4. 3160

Description : A circular solid of uniform thickness 20 mm, radius 200 mm and mass 20 kg, is used as a flywheel. If it rotates at 600 rpm, the kinetic energy of the flywheel, in joules is 1. 395 2. 790 3. 1580 4. 3160

Last Answer : 2. 790

Split flywheel is made to 1. avoid cooling stress 2. reduce weight 3. increase weight 4. maximize large centrifugal force

Description : Split flywheel is made to 1. avoid cooling stress 2. reduce weight 3. increase weight 4. maximize large centrifugal force

Last Answer : 1. avoid cooling stress

The flywheel is accelerate when 1. driving torque > load torque 2. driving torque < load torque 3. driving torque = load torque 4. driving torque / load torque

Description : The flywheel is accelerate when 1. driving torque > load torque 2. driving torque < load torque 3. driving torque = load torque 4. driving torque / load torque

Last Answer : 1. driving torque > load torque

Energy stored in flywheel in the form of 1. heat energy 2. kinetic energy 3. solar energy 4. thermal energy

Description : Energy stored in flywheel in the form of 1. heat energy 2. kinetic energy 3. solar energy 4. thermal energy

Last Answer : 2. kinetic energy

The cross section of flywheel arm is 1. I section 2. Rectangular 3. Elliptical 4. Circular

Description : The cross section of flywheel arm is 1. I section 2. Rectangular 3. Elliptical 4. Circular

Last Answer : 3. Elliptical

For finding out the bending moment for the arm (spoke) of flywheel the arm is assumed as 1. a cantilever beam fixed at the rim and subjected to tangential force at the hub 2. a simply supported beam fixed at hub and rim and carrying uniformly distributed load 3. a cantilever hub fixed at the rim and subjected to tangential force at the rim 4. a fixed beam fixed at hub and rim and carrying uniformly distributed load

Description : For finding out the bending moment for the arm (spoke) of flywheel the arm is assumed as 1. a cantilever beam fixed at the rim and subjected to tangential force at the hub 2. a simply ... tangential force at the rim 4. a fixed beam fixed at hub and rim and carrying uniformly distributed load

Last Answer : 3. a cantilever hub fixed at the rim and subjected to tangential force at the rim

The hub diameter of the flywheel is taken as 1. 2.5(shaft diameter) 2. 1.5(shaft diameter) 3. 4(shaft diameter) 4. 2(shaft diameter)

Description : The hub diameter of the flywheel is taken as 1. 2.5(shaft diameter) 2. 1.5(shaft diameter) 3. 4(shaft diameter) 4. 2(shaft diameter)

Last Answer : 4. 2(shaft diameter)

The spokes of the flywheel are subjected to 1. direct shear stress 2. torsional shear stress 3. tensile stress 4. compressive stress

Description : The spokes of the flywheel are subjected to 1. direct shear stress 2. torsional shear stress 3. tensile stress 4. compressive stress

Last Answer : 3. tensile stress

The rim of the flywheel is subjected to, 1. direct tensile stress and bending stress 2. torsional shear stress and bending stress 3. direct shear stress and bending stress 4. compressive stress and bending stress

Description : The rim of the flywheel is subjected to, 1. direct tensile stress and bending stress 2. torsional shear stress and bending stress 3. direct shear stress and bending stress 4. compressive stress and bending stress

Last Answer : 1. direct tensile stress and bending stress

A flywheel is made of 1. cast iron 2. high strength steels 3. graphic fiber reinforced polymer 4. any one of the above materials

Description : A flywheel is made of 1. cast iron 2. high strength steels 3. graphic fiber reinforced polymer 4. any one of the above materials

Last Answer : 4. any one of the above materials

Which of the following is (are) true? (A) Cast iron has poor tensile strength compared to steel (B) Failure of cast iron flywheel is sudden and total (C) Machinability of cast iron flywheel is poor compared to steel flywheel (D) All of the above

Description : Which of the following is (are) true? (A) Cast iron has poor tensile strength compared to steel (B) Failure of cast iron flywheel is sudden and total (C) Machinability of cast iron flywheel is poor compared to steel flywheel (D) All of the above

Last Answer : (D) All of the above

The flywheel is accelerated when (A) Driving torque > Load torque (B) Driving torque < Load torque (C) Driving torque = Load torque (D) Any of the above

Description : The flywheel is accelerated when (A) Driving torque > Load torque (B) Driving torque < Load torque (C) Driving torque = Load torque (D) Any of the above

Last Answer : (A) Driving torque > Load torque

In case of solid disk flywheel, the mass (m) of disk is given by (A) πR 2 tρ (B) (π/2)R 2 tρ (C) 3πR 2 tρ (D) (3/2)πR 2 tρ

Description : In case of solid disk flywheel, the mass (m) of disk is given by (A) πR 2 tρ (B) (π/2)R 2 tρ (C) 3πR 2 tρ (D) (3/2)πR 2 tρ

Last Answer : (A) πR 2 tρ

Split flywheel is made to (A) Avoid cooling stresses (B) Minimize large centrifugal forces (C) Reduce weight (D) All of the above

Description : Split flywheel is made to (A) Avoid cooling stresses (B) Minimize large centrifugal forces (C) Reduce weight (D) All of the above

Last Answer : (A) Avoid cooling stresses