What is meant by linearity?

What is meant by linearity?
by

1 Answer

Answer :

The linearity of an ADC/DAC is an important measure of its accuracy & tells us how close the converter output is to its ideal transfer characteristics. The linearity error is usually expressed as a fraction of LSB increment or percentage of full-scale voltage. A good converter exhibits a linearity error of less than ±½LSB.
by

Related questions

A set of values X1,X2……..Xn which satisfies the constraints of the LPP is called_______ a. Solution b. Variable c. Linearity d. None of the above

Description : A set of values X1,X2……..Xn which satisfies the constraints of the LPP is called_______ a. Solution b. Variable c. Linearity d. None of the above

Last Answer : a. Solution

Companding helps in reducing __________ with respect to signal: (A) Interference (B) Signal overloading (C) Non linearity (D) Quantization noise

Description : Companding helps in reducing __________ with respect to signal: (A) Interference (B) Signal overloading (C) Non linearity (D) Quantization noise

Last Answer : (D) Quantization noise

Which of the following contributes to harmonics distortion in amplifiers? A) Positive feedback B) Presence of noise C) Defective active device D) Non linearity in active device.

Description : Which of the following contributes to harmonics distortion in amplifiers? A) Positive feedback B) Presence of noise C) Defective active device D) Non linearity in active device.

Last Answer : D) Non linearity in active device.

Increasing gate length in a sawtooth generator does what to linearity?

Description : Increasing gate length in a sawtooth generator does what to linearity?

Last Answer : Decreases linearity.

Define: i) Sensitivity ii) Linearity

Description : Define: i) Sensitivity ii) Linearity

Last Answer : i) Sensitivity: It is the ratio of magnitude of output signal to the magnitude of input signal.  ii) Linearity is defined as the ability to reproduce the input characteristics symmetrically and this can be expressed by ... the output, x is the input, m is the slope and c is the intercept.

Linearity property

Description : Linearity property

Last Answer : Linearity property 1 : https://youtu.be/-iaXB3uvX9k Linearity property 2 : https://youtu.be/CbO8Mnw5v_o Linearity property 3 : https://youtu.be/P6GiYv5MCFI Linearity property 4 : https://youtu.be/ ... property 5 : https://youtu.be/KxkSkUkz8FY Linearity property 6 : https://youtu.be/W-F_vBifgZI

Define linearity of instrument and draw linearity curve

Description : Define linearity of instrument and draw linearity curve

Last Answer : Linearity : It is defined as the ability of an instrument to reproduce the input characteristics linearly and symmetrically.  (or)  It is defined as maximum deviation of calibration curve from a ... as percentage of full scale output and measured on increasing load only. Linearity curve 

Compare RTD and thermistor on the basis of temperature coefficient , linearity, temperature range and cost.

Description : Compare RTD and thermistor on the basis of temperature coefficient , linearity, temperature range and cost.

Last Answer : Parameters RTD Thermistors Temperature coefficient  It has positive temperature Coefficient (PTC) of Resistance. It has both positive and negative temperature Coefficient (PTC and NTC) of Resistance. ... -270oC to 2800oC -150oC to 300oC Cost High cost Low cost

What is meant by referring to electromagnetic waves as having circular polarization? A. The electric field is bent into a circular shape. B. The electric field rotates C. The electromagnetic wave continues to circle the earth D. The electromagnetic wave has been generated by a quad antenna

Description : What is meant by referring to electromagnetic waves as having circular polarization? A. The electric field is bent into a circular shape. B. The electric field rotates C. The electromagnetic wave continues to circle the earth D. The electromagnetic wave has been generated by a quad antenna

Last Answer : B. The electric field rotates

What is meant by referring to electromagnetic waves as horizontally polarized? A. The electric field is parallel to the earth. B. The magnetic field is parallel to the earth. C. Both the electric and magnetic fields are horizontal D. Both the electric and magnetic fields are vertical

Description : What is meant by referring to electromagnetic waves as horizontally polarized? A. The electric field is parallel to the earth. B. The magnetic field is parallel to the earth. C. Both the electric and magnetic fields are horizontal D. Both the electric and magnetic fields are vertical

Last Answer : A. The electric field is parallel to the earth.

What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

Description : What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

Last Answer : B. The ratio between the deviation of a frequency modulated signal and the modulating frequency.

What is meant by the term deviation ratio? A. The ratio of the audio modulating frequency to the center carrier frequency. B. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency. C. The ratio of the carrier center frequency to the audio modulating frequency. D. The ratio of the highest audio modulating frequency to the average audio modulating frequency.

Description : What is meant by the term deviation ratio? A. The ratio of the audio modulating frequency to the center carrier frequency. B. The ratio of the maximum carrier frequency deviation to the highest ... . D. The ratio of the highest audio modulating frequency to the average audio modulating frequency.

Last Answer : B. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

What is meant by the term deviation ratio? A. The ratio of the carrier center frequency to the audio modulating frequency B. The ratio of the highest audio modulating frequency to the average audio modulating frequency C. The ratio of the maximum carrier frequency deviation to the highest audio modulation frequency D. The ratio of the audio modulating frequency to the center carrier frequency

Description : What is meant by the term deviation ratio? A. The ratio of the carrier center frequency to the audio modulating frequency B. The ratio of the highest audio modulating frequency to the ... audio modulation frequency D. The ratio of the audio modulating frequency to the center carrier frequency

Last Answer : C. The ratio of the maximum carrier frequency deviation to the highest audio modulation frequency

What is meant by the term radiation resistance for an antenna? A. The resistance in the trap coils to received signal B. An equivalent resistance that would dissipate the same amount of power as that radiated from an antenna C. The specific impedance of the antenna D. Losses in the antenna elements and feed line

Description : What is meant by the term radiation resistance for an antenna? A. The resistance in the trap coils to received signal B. An equivalent resistance that would dissipate the same amount of power as ... antenna C. The specific impedance of the antenna D. Losses in the antenna elements and feed line

Last Answer : B. An equivalent resistance that would dissipate the same amount of power as that radiated from an antenna

What is meant by referring to electromagnetic waves as horizontally polarized? A. The electric field is parallel to the earth B. Both the electric and magnetic fields are vertical C. Both the electric and magnetic fields are horizontal D. The magnetic fields is parallel to the earth

Description : What is meant by referring to electromagnetic waves as horizontally polarized? A. The electric field is parallel to the earth B. Both the electric and magnetic fields are vertical C. Both the electric and magnetic fields are horizontal D. The magnetic fields is parallel to the earth

Last Answer : A. The electric field is parallel to the earth

What is meant by the term antenna bandwidth A. Antenna length divided by the number of elements. B. The angle between the half-power radiation points C. The frequency range over which and antenna can be expected to perform well D. The angle formed between two imaginary line drawn through the ends of the elements

Description : What is meant by the term antenna bandwidth A. Antenna length divided by the number of elements. B. The angle between the half-power radiation points C. The frequency range over which and antenna ... perform well D. The angle formed between two imaginary line drawn through the ends of the elements

Last Answer : C. The frequency range over which and antenna can be expected to perform well

What is meant by the term antenna efficiency? A. Efficiency = effective radiated power/transmitter output x 100% B. Efficiency = radiation resistance/ transmission resistance C. Efficiency = total resistance/radiation resistance x 100% D. Efficiency = radiation resistance/total resistance x 100%

Description : What is meant by the term antenna efficiency? A. Efficiency = effective radiated power/transmitter output x 100% B. Efficiency = radiation resistance/ transmission resistance C. Efficiency = total resistance/radiation resistance x 100% D. Efficiency = radiation resistance/total resistance x 100%

Last Answer : D. Efficiency = radiation resistance/total resistance x 100%

What is meant by voltage follower?

Description : What is meant by voltage follower?

Last Answer : If the output voltage of an op-amp follows the input i.e., if the output voltage is equal to the input voltage it is called as a voltage follower.

What do you meant by thermal runway?

Description : What do you meant by thermal runway?

Last Answer : Due to the self heating at the collector junction, the collector current rises. This causes damage to the device. This phenomenon is called thermal runway.

What is meant by antenna gain? A. The final amplifier gain minus the transmission line losses (including any phasing lines present) B. The ratio of the amount of power produced by the antenna compared to the output power of the transmitter C. The ratio of the signal in the backward direction D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Description : What is meant by antenna gain? A. The final amplifier gain minus the transmission line losses (including any phasing lines present) B. The ratio of the amount of power produced by the antenna ... D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Last Answer : D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

What is meant by current limiting?

Description : What is meant by current limiting?

Last Answer : Current limiting refers to the ability of a regulator to prevent the load current from increasing above a preset value.

What is meant by molecular beam epitaxy(MBE)?

Description : What is meant by molecular beam epitaxy(MBE)?

Last Answer : In the molecular beam epitaxy, ilicon along with dopants is evaporated.The evaporated species are transported at a relatively high velocity in a vacuum to the substrate.The relatively low vapour pressure of silicon ... MBE is performed under ultra high vacuum (UHV) condition of 10-8 to 10-10 Torr.