Define line regulation.

Define line regulation.
by

1 Answer

Answer :

Line regulation is defined as the percentage change in the output voltage for a change in the input voltage.It is expressed in millivolts or as a percentage of the output voltage. 
by

Related questions

Define load regulation.

Description : Define load regulation.

Last Answer : Load regulation is defined as the change in output voltage for a change in load current. It is expressed in millivolts or as a percentage of the output voltage. 

Which conference in the ITU-structure does the telecommunication standardization bureau report? A. World telecommunication standardization conference B. ITU-development sector C. Radio regulation board D. The secretary general

Description : Which conference in the ITU-structure does the telecommunication standardization bureau report? A. World telecommunication standardization conference B. ITU-development sector C. Radio regulation board D. The secretary general

Last Answer : A. World telecommunication standardization conference

In regulation of public telecommunications carrier such as in the evaluation of new entrant, the following consideration shall be given emphasis to _______. A. Legal, technical and citizenship B. Technical, citizenship and kind of service C. Citizenship, capacity and financial D. Technical, legal and financial

Description : In regulation of public telecommunications carrier such as in the evaluation of new entrant, the following consideration shall be given emphasis to _______. A. Legal, technical and citizenship B. ... and kind of service C. Citizenship, capacity and financial D. Technical, legal and financial

Last Answer : D. Technical, legal and financial

In radio regulation, the first symbol in the designation of radio emission is ______. A. Bandwidth B. Nature of signal(s) modulation the main carrier C. Type of modulation of the main carrier D. Type of information to be transmitted

Description : In radio regulation, the first symbol in the designation of radio emission is ______. A. Bandwidth B. Nature of signal(s) modulation the main carrier C. Type of modulation of the main carrier D. Type of information to be transmitted

Last Answer : C. Type of modulation of the main carrier

The latest government regulation in the telecommunication which provides policy for the provision of local exchange carrier service. A. E.O. 546 B. E.O. 109 C. Act 3948 D. E.O. 59

Description : The latest government regulation in the telecommunication which provides policy for the provision of local exchange carrier service. A. E.O. 546 B. E.O. 109 C. Act 3948 D. E.O. 59

Last Answer : B. E.O. 109

Referred by radio regulation as the station in the mobile service not intended to be used while in motion. A. Fixed station B. Base station C. Land station D. Coast station

Description : Referred by radio regulation as the station in the mobile service not intended to be used while in motion. A. Fixed station B. Base station C. Land station D. Coast station

Last Answer : C. Land station

A radio communications service use in radio regulation between specified fixed points provided primarily for the safety of air navigation and for the regular efficient and economical air transport. A. Space operation service B. Space service C. Aeronautical mobile service D. Aeronautical fixed service

Description : A radio communications service use in radio regulation between specified fixed points provided primarily for the safety of air navigation and for the regular efficient and economical air transport ... operation service B. Space service C. Aeronautical mobile service D. Aeronautical fixed service

Last Answer : D. Aeronautical fixed service

A government regulation in telecommunication which provide policy to improve the provision of local exchange carrier service. A. E.O. 109 B. Act 3846 C. E.O. 59 D. E.O. 546

Description : A government regulation in telecommunication which provide policy to improve the provision of local exchange carrier service. A. E.O. 109 B. Act 3846 C. E.O. 59 D. E.O. 546

Last Answer : A. E.O. 109

Any governmental office responsible in discharging the obligations undertaken in the convention of the ITU and the regulation. A. Administration B. The union C. Country D. Telecommunications office

Description : Any governmental office responsible in discharging the obligations undertaken in the convention of the ITU and the regulation. A. Administration B. The union C. Country D. Telecommunications office

Last Answer : A. Administration

The basic law providing for the regulation of radio station, communications in the Philippines and other purposes. A. Act. No.`3846 B. D.O. No. 11 C. D.O. No. 88 D. D.O. No. 5

Description : The basic law providing for the regulation of radio station, communications in the Philippines and other purposes. A. Act. No.`3846 B. D.O. No. 11 C. D.O. No. 88 D. D.O. No. 5

Last Answer : A. Act. No.`3846

The institutionalization of the continuing Professional Education (CPE) Program of the various regulated profession under the supervision of the Professional Regulation Commission. A. E.O. No. 266 B. E.O. No. 626 C. E.O. No. 662 D. P.D. 381

Description : The institutionalization of the continuing Professional Education (CPE) Program of the various regulated profession under the supervision of the Professional Regulation Commission. A. E.O. No. 266 B. E.O. No. 626 C. E.O. No. 662 D. P.D. 381

Last Answer : A. E.O. No. 266

Define line regulation and load regulation.

Description : Define line regulation and load regulation.

Last Answer : Load regulation is the ability of the power supply to maintain its specified output voltage over changes in the load. Line regulation is the ability of the power supply to maintain its specified output voltage over changes in the input line voltage.

Define the term line regulation.

Description : Define the term line regulation. 

Last Answer : Line regulation is the ability of a power supply to maintain a constant output voltage irrespective of any changes in input voltage. 

Define load and line regulation.

Description : Define load and line regulation.

Last Answer : 1. Load regulation : The load regulation indicates how much the load voltage changes when the load current changes. The load regulation is defined as:  % Load regulation = (VNL-VFL) / VFL *100  ... the power supply. A well-regulated power supply can have a line regulation of less than 0.1%.  

Define the term voltage regulation of Alternator.

Description : Define the term voltage regulation of Alternator.

Last Answer : The voltage regulation of an Alternator is defined as the change in terminal voltage from no-load to load condition expressed as a fraction or percentage of terminal voltage at load condition ; the speed and excitation conditions remaining same.

The methods and regulation used to define goals, plan and monitor tasks and resources, identify and resolve issues, and control costs and budgets for a specific project is known as … a. project management. b. Process Management c. Process d. Activities

Description : The methods and regulation used to define goals, plan and monitor tasks and resources, identify and resolve issues, and control costs and budgets for a specific project is known as … a. project management. b. Process Management c. Process d. Activities

Last Answer : a. project management.

Define the percentage voltage regulation and efficiency of a power transformer.

Description : Define the percentage voltage regulation and efficiency of a power transformer.  

Last Answer : Voltage regulation is the difference between no load voltage and full load voltage by no load voltage. Voltage regulation = No load voltage - Full load voltage / No load voltage. Voltage regulation is mentioned ... . % Efficiency = Output in watts * 100 / Output in watts + losses. 

Define: (i) Efficiency (ii) Voltage regulation of transformer.

Description : Define: (i) Efficiency (ii) Voltage regulation of transformer.

Last Answer : i) Efficiency : It is the ratio of output power to the input power of the transformer.It is denoted by η. ii) Voltage Regulation of transformer: The ratio of the change in Secondary Terminal ... So where, VNL = No Load Secondary voltage VFL = Full load secondary voltage

Define Piezoelectric effect.

Description : Define Piezoelectric effect.

Last Answer : When applying mechanical energy to some type of crystals called piezoelectric crystals the mechanical energy is converted into electrical energy is called piezoelectric effect.

Define non-inverting amplifier?

Description : Define non-inverting amplifier?

Last Answer : The input is applied to the non-inverting input terminal and the inverting terminal connected to the ground.

Define slew rate?

Description : Define slew rate?

Last Answer : Slew rate can be defined as the maximum rate of change of output voltage of op-amp with respect to time.

Define input bias current?

Description : Define input bias current?

Last Answer : It is defined as the average of the currents entering into the input terminals of an op-amp.

Define input offset current?

Description : Define input offset current?

Last Answer : It is defined as the algebraic difference between the current entering the inverting and non-inverting terminal of an op-amp.

Define input offset voltage?

Description : Define input offset voltage?

Last Answer : It is defined as the voltage that must be applied between the input terminals of an op-amp to nullify the output.

Define loading?

Description : Define loading?

Last Answer : A large value of Rc cannot be used in a circuit since,a large value of resistance requires a large chip area.For large Rc, quiescent drop across it increases and hence a large power supply is required ... source can also be used as an active load for an amplifier to obtain a very large voltage gain.

Define current amplification factor?

Description : Define current amplification factor?

Last Answer : It is defined as the ratio of change in output current to the change in input current at constant other side voltage.

Define PIV .

Description : Define PIV .

Last Answer : Peak inverse voltage is the maximum reverse voltage that can be applied to the PN junction without damage to the junction.

Define the term diffusion current?

Description : Define the term diffusion current?

Last Answer : A concentration gradient exists, if the number of either electrons or holes is greater in one region of a semiconductor as compared to the rest of the region. The holes and electron ... concentration. This process in called diffusion and the current produced due this movement is diffusion current.

Define drift current?

Description : Define drift current?

Last Answer : When an electric field is applied across the semiconductor, the holes move towards the negative terminal of the battery and electron move towards the positive terminal of the battery. This drift movement of charge carriers will result in a current termed as drift current.

Define Monostable Multivibrators

Description : Define Monostable Multivibrators

Last Answer : The monostable multivibrator or one –shot requires an external signal called a trigger to force the circuitinto a quasi stable state for a particular time or delay.

Define Astable Multivibrators.

Description : Define Astable Multivibrators.

Last Answer : The astable Multivibrators toggles between one state and the other without the influence of any other external control signal. It is also called as free running multivibrator.

Define Multivibrators. Mention its types.

Description : Define Multivibrators. Mention its types.

Last Answer : Multivibrators are regenerative circuits, Which are mainly used in timing applications. Based on their operational characteristics they can be classified into • Astable Multivibrators • Monostable Multivibrators • Bistable Multivibrators

Define slope overload noise and granular noise.

Description : Define slope overload noise and granular noise.

Last Answer : Slope overload noise is introduced due to the use of a step size delta is too small To follow some portions of the waveform with a step size.   Granular noise results from using a step size that is too large in parts of the waveform having a small slope. 

Define Delta modulation.

Description : Define Delta modulation. 

Last Answer : Delta modulation is a technique in which derivative of the signal is quantized. The delta modulation shows slope overload for fast input signals and their performance is dependent on input signal frequency.

Define Dither.

Description : Define Dither.

Last Answer : It is a very small amount of random noise(white noise) which is added to the input before A/D conversion to improve the performance of A/D converter.

Define quantization error.

Description : Define quantization error.

Last Answer : In A/D converter the smallest digital step is due to the LSB and it can be made smaller only by increasing the number of bits in the digital representation. This error is called quantization error.

Define sample period and hold period.

Description : Define sample period and hold period.

Last Answer : The time during which the voltage across the capacitor in sample and hold circuit is equal to the input voltage is called sample period.The time period during which the voltage across the capacitor is held constant is called hold period. 

Define accuracy of converter.

Description : Define accuracy of converter.

Last Answer : Absolute accuracy: It is the maximum deviation between the actual converter output & the ideal converter output.  Relative accuracy: It is the maximum deviation after gain & offset errors have been removed. ... of a converter is also specified in form of LSB increments or % of full scale voltage.

Define resolution of a data converter.

Description : Define resolution of a data converter.

Last Answer : The resolution of a converter is the smallest change in voltage which may be produced at the output or input of the converter. Resolution (in volts)= VFS/2n-1=1 LSB increment. The resolution of an ADC is defined as the smallest change in analog input for a one bit change at the output.

Define conversion time.

Description : Define conversion time.

Last Answer : conversion time of a successive approximation type ADC is given by  T(n+1)  where T---clock period  Tc---conversion time  n----no. of bits

Define Voltage to Frequency conversion factor.

Description : Define Voltage to Frequency conversion factor. 

Last Answer : Voltage to Frequency conversion factor is defined as,  Kv = fo / Vc= 8fo /Vcc  Vc is the modulation voltage  fo frequency shift

Define free running mode .

Description : Define free running mode .

Last Answer : An interactive computer mode that allows more than one user to have simultaneous use of a program.

Define Pull-in time.

Description : Define Pull-in time.

Last Answer : The total time taken by the PLL to establish lok is called pull-in time.It depends on the initial phase and frequency difference between the two signals as well as on the overall loop gain and loop filter characteristics

Define capture range of PLL.

Description : Define capture range of PLL.

Last Answer : The range of frequencies over which the PLL can acquire lock with an input signal is called the capture range. It is expressed as a percentage of the VCO free running frequency.

Define lock-in range of a PLL.

Description : Define lock-in range of a PLL.

Last Answer : The range of frequencies over which the PLL can maintain lock with the incoming signal is called the lock-in range or tracking range. It is expressed as a percentage of theVCO free running frequency.

Define FSK modulation.

Description : Define FSK modulation.

Last Answer : FSK is a type of frequency modulation ,in which the binary data or code is transmitted by means of a carrier frequency that is shifted between two fixed frequency namely mark(logic1) and space frequency(logic 0).

Define High pass filter.

Description : Define High pass filter.

Last Answer : A low pass filter allows only high frequency signals upto a certain break point fH to pass through

Define low pass filter.

Description : Define low pass filter.

Last Answer : A low pass filter allows only low frequency signals upto a certain break point fH to pass through.

Define Logarithmic and antilogarithmic amplifier.

Description : Define Logarithmic and antilogarithmic amplifier. 

Last Answer : When a logarithmic PN junction is used in the feedback network of op-amp, the circuit exhibits log or antilog response. The logarithmic amplifier is a current to voltage converter with the ... converts the logarithmically encoded signal back to the original signal levels as given by vl=vR10-kvi

Define Bandpass filter.

Description : Define Bandpass filter.

Last Answer : The bandpass filter is the combination of high and low pass filters, and this allows a specified range of frequencies to pass through.