Energy is lost in wires due to A. heating B. resistance C. conduction D. both A and B

Energy is lost in wires due to

A. heating

B. resistance

C. conduction

D. both A and B
by

1 Answer

Answer :

both A and B
by

Related questions

reduction in thermal resistance during heat transfer does not occur in the (A) Convection heat transfer by stirring the fluid and cleaning the heating surface (B) Conduction heat transfer by reduction in the material thickness and increase in the thermal conductivity (C) Radiation heat transfer by increasing the temperature and reducing the emissivity (D) None of these

Description : reduction in thermal resistance during heat transfer does not occur in the (A) Convection heat transfer by stirring the fluid and cleaning the heating surface (B) Conduction heat transfer by ... Radiation heat transfer by increasing the temperature and reducing the emissivity (D) None of these

Last Answer : Option C

Nichrome wire is used as a heating element I many appliances because (a) it can be drawn out into wires easily (b) it has high resistivity (c) it resists oxidation in air when red hot (d) both (b) and (c) are correct

Description : Nichrome wire is used as a heating element I many appliances because (a) it can be drawn out into wires easily (b) it has high resistivity (c) it resists oxidation in air when red hot (d) both (b) and (c) are correct

Last Answer : Ans:(d)

The atmosphere near the earth’s surface is “heated from below.” Which of the following does not significantly contribute to this heating -----------? A. Conduction of heat upward from a hot surface B. Convection from a hot surface C. Absorption of infrared energy that has been radiated from the surface D. Heat energy from the earth’s interior (Answer)

Description : The atmosphere near the earth's surface is heated from below. Which of the following does not significantly contribute to this heating -----------? A. Conduction of heat upward from a ... infrared energy that has been radiated from the surface D. Heat energy from the earth's interior (Answer)

Last Answer : D. Heat energy from the earth’s interior (Answer)

A material is called 'ductile', if it can be (A) Drawn into wires (B) Hammered to a thin sheet (C) Fractured without deformation (D) Made lustrous by heating it

Description : A material is called 'ductile', if it can be (A) Drawn into wires (B) Hammered to a thin sheet (C) Fractured without deformation (D) Made lustrous by heating it

Last Answer : (A) Drawn into wires

I have an older Wharfdale speaker that has lost its clarity. All the wires appear to be connected properly. Is there anything I should check or look for to improve the sound of the speaker?

Description : I have an older Wharfdale speaker that has lost its clarity. All the wires appear to be connected properly. Is there anything I should check or look for to improve the sound of the speaker?

Last Answer : I assume you’ve checked all the other equipment and tried different cables and receiver. Have you taken the speaker apart and checked the wiring inside? I don’t know what to look for except for obvious corrosion or connections that might be breaking.

In a furnace with heating element temperature at 1700°C, the dominant mechanism of heat transfer will be (A) Conduction (B) Radiation (C) Natural convection (D) Forced convection

Description : In a furnace with heating element temperature at 1700°C, the dominant mechanism of heat transfer will be (A) Conduction (B) Radiation (C) Natural convection (D) Forced convection

Last Answer : (B) Radiation

____ heating means that the circulation of currents in one region inside a can distributes the heat to another. a. Conduction c. Convection b. Radiation d. Slow

Description : ____ heating means that the circulation of currents in one region inside a can distributes the heat to another. a. Conduction c. Convection b. Radiation d. Slow

Last Answer : c. Convection

Heat transfer by conduction results due to the transfer of free electrons, kinetic energy & vibrational energy from one molecule to another. Conduction heat transfer cannot take place (A) Between two bodies in physical contact with each other (B) Between two bodies not in physical contact with each other (C) From one part of a body to the another part of the same body (D) Both 'b' & 'c'

Description : Heat transfer by conduction results due to the transfer of free electrons, kinetic energy & vibrational energy from one molecule to another. Conduction heat transfer cannot take place (A) Between two bodies in physical contact ... of a body to the another part of the same body (D) Both 'b' & 'c'

Last Answer : (B) Between two bodies not in physical contact with each other

Transfer of heat energy from a heater coil to the cooking vessel takes place through the process of- (1) Convection only (2) Conduction and convection only (3) Radiation and convection only (4) Convection, conduction and radiation

Description : Transfer of heat energy from a heater coil to the cooking vessel takes place through the process of- (1) Convection only (2) Conduction and convection only (3) Radiation and convection only (4) Convection, conduction and radiation

Last Answer : (3) Radiation and convection only Explanation: Conduction is the transfer of heat energy by direct contact, convection is the movement of heat by actual motion of matter; radiation is the transfer of energy with the help of electromagnetic waves.

In a conductor – (1) there is no conduction band (2) the forbidden energy gap is very wide (3) the forbidden energy gap is very narrow (4) the valence band and the conduction band overlap each other

Description : In a conductor – (1) there is no conduction band (2) the forbidden energy gap is very wide (3) the forbidden energy gap is very narrow (4) the valence band and the conduction band overlap each other

Last Answer : (4) the valence band and the conduction band overlap each other Explanation: In the case of a conductor, there is no forbidden energy gap. The conduction and valence energy bands overlap ... , the electrons from the valence band can freely enter the conduction energy band. Conduction energy band

Energy travels from Sun to Earth through – (1) conduction (2) convection (3) radiation (4) modulation

Description : Energy travels from Sun to Earth through – (1) conduction (2) convection (3) radiation (4) modulation

Last Answer : (3) radiation

Energy travels from Sun to Earth through (1) conduction (2) convection (3) radiation (4) modulation

Description : Energy travels from Sun to Earth through (1) conduction (2) convection (3) radiation (4) modulation

Last Answer : radiation

In a conductor (1) there is no conduction band (2) the forbidden energy gap is very wide (3) the forbidden energy gap is very narrow (4) the valence band and the conduction band overlap each other

Description : In a conductor (1) there is no conduction band (2) the forbidden energy gap is very wide (3) the forbidden energy gap is very narrow (4) the valence band and the conduction band overlap each other

Last Answer : the valence band and the conduction band overlap each other

Heat is transmitted from higher temperature to lower temperature through the actual motion of the molecules in – (1) Conduction (2) Convection (3) Radiation (4) Both conduction and convection

Description : Heat is transmitted from higher temperature to lower temperature through the actual motion of the molecules in – (1) Conduction (2) Convection (3) Radiation (4) Both conduction and convection

Last Answer : (2) Convection Explanation: The process of heat transfer from one place to an-other place without the movement of particles is called conduction Example: Heat transfer through Metal rods. On the ... heated particles of the substance. The fluids (liquids and gases) are heated by this process.

Heat is transmitted from higher temperature to lower temperature through the actual motion of the molecules in - (1) Conduction (2) Convection (3) Radiation (4) Both conduction and convection

Description : Heat is transmitted from higher temperature to lower temperature through the actual motion of the molecules in - (1) Conduction (2) Convection (3) Radiation (4) Both conduction and convection

Last Answer : (2) Convection Explanation: The process of heat transfer from one place to another place without the movement of particles is called conduction,

Heat is transmitted from higher temperature to lower temperature through the actual motion of the molecules in (1) Conduction (2) Convection (3) Radiation (4) Both conduction and convection

Description : Heat is transmitted from higher temperature to lower temperature through the actual motion of the molecules in (1) Conduction (2) Convection (3) Radiation (4) Both conduction and convection

Last Answer : Convection

Two wires A and B of the same material have their lengths in the ratio `1 : 5` and diameters in the ratio ` 3 : 2`. If the resistance of the wire B is

Description : Two wires A and B of the same material have their lengths in the ratio `1 : 5` and diameters in the ratio ` 3 : 2`. If the resistance of the wire B is

Last Answer : Two wires A and B of the same material have their lengths in the ratio `1 : 5` and diameters in ... `180 Omega`, find the resistance of the wire A.

`1kg` piece of copper is drawn into a wire `1mm` thick and another piece into a wire `2mm` thick. Compare the resistance of these wires.

Description : `1kg` piece of copper is drawn into a wire `1mm` thick and another piece into a wire `2mm` thick. Compare the resistance of these wires.

Last Answer : `1kg` piece of copper is drawn into a wire `1mm` thick and another piece into a wire `2mm` thick. Compare the resistance of these wires.

Two copper wires A and B of equal masses are taken. The length of A is double the length of B. If the resistance of wire A is `160 Omega `, then calcu

Description : Two copper wires A and B of equal masses are taken. The length of A is double the length of B. If the resistance of wire A is `160 Omega `, then calcu

Last Answer : Two copper wires A and B of equal masses are taken. The length of A is double the length of ... Omega `, then calculate the resistance of the wire B.

Copper and carbon wires are connected in series and the combined resistor is kept at `0^(@)C`. Assuming the combined resistance does not vary with tem

Description : Copper and carbon wires are connected in series and the combined resistor is kept at `0^(@)C`. Assuming the combined resistance does not vary with tem

Last Answer : Copper and carbon wires are connected in series and the combined resistor is kept at `0^(@)C`. Assuming the combined ... C)` A. 4 B. 8 C. 6 D. 2

Assertion : Two resistance wires shown in figure are of same material. They have equal length. More heat is generated in wire A. Reason : In series `H

Description : Assertion : Two resistance wires shown in figure are of same material. They have equal length. More heat is generated in wire A. Reason : In series `H

Last Answer : Assertion : Two resistance wires shown in figure are of same material. They have equal length. More ... . If Assertion is false but Reason is true.

Two resistance wires on joining in parallel the resultant resistance is ohms `(6)/(5)` ohms. One of the wire breaks, the effective resistance is 2 ohm

Description : Two resistance wires on joining in parallel the resultant resistance is ohms `(6)/(5)` ohms. One of the wire breaks, the effective resistance is 2 ohm

Last Answer : Two resistance wires on joining in parallel the resultant resistance is ohms `(6)/(5)` ohms. One of the wire ... ` C. `(6)/(5)Omega` D. `3Omega`

If two wires of the same material have the same thickness but different length the blank wire will have greater resistance?

Description : If two wires of the same material have the same thickness but different length the blank wire will have greater resistance?

Last Answer : Materials

The filament of an electric lamp becomes white hot but the lead-in wires holding the filament are only slightly heated because they (a) have smaller current passing through them (b) have very low resistance (c) have higher melting point (d) are made of black iron

Description : The filament of an electric lamp becomes white hot but the lead-in wires holding the filament are only slightly heated because they (a) have smaller current passing through them (b) have very low resistance (c) have higher melting point (d) are made of black iron

Last Answer : Ans:(b)

The current in a metal at any frequency is due to a) Conduction current b) Displacement current c) Both conduction and displacement current d) Neither conduction nor displacement current

Description : The current in a metal at any frequency is due to a) Conduction current b) Displacement current c) Both conduction and displacement current d) Neither conduction nor displacement current

Last Answer : a) Conduction current

Copper wires are generally used for electrical power transmission instead of iron wire because (1) copper is cheaper than iron (2) copper is lighter than iron (3) copper is a better conductor of electricity than iron (4) copper can take higher power than iron

Description : Copper wires are generally used for electrical power transmission instead of iron wire because (1) copper is cheaper than iron (2) copper is lighter than iron (3) copper is a better conductor of electricity than iron (4) copper can take higher power than iron

Last Answer : (3) copper is a better conductor of electricity than iron Explanation: Copper is generally preferred for electrical power transmission instead of iron because of its high electrical conductivity and low resistivity.

If a metal can be drawn into wires relatively easily it is called: (1) malleable (2) ductile (3) extractive (4) tactile

Description : If a metal can be drawn into wires relatively easily it is called: (1) malleable (2) ductile (3) extractive (4) tactile

Last Answer : (2) ductile Explanation: Ductility is a physical property of a material associated with the ability to be hammered thin or stretched into wire without breaking.

Force per meter on two wires carrying a current of 1 A placed 1 m apart is equal to A. 6.7 × 10-11 N B. 9.0 × 109 N C. 2.0 × 10-7 N D. 3.0 × 10-4 N

Description : Force per meter on two wires carrying a current of 1 A placed 1 m apart is equal to A. 6.7 × 10-11 N B. 9.0 × 109 N C. 2.0 × 10-7 N D. 3.0 × 10-4 N

Last Answer :  2.0 × 10-7 N

Two infinitely long, parallel wires carry currents which are in opposite directions. The two wires: w) are attracted toward each other x) repel each other y) have no effect on each other.

Description : Two infinitely long, parallel wires carry currents which are in opposite directions. The two wires: w) are attracted toward each other x) repel each other y) have no effect on each other.

Last Answer : ANSWER: X -- REPEL EACH OTHER

Two parallel wires carrying currents in opposite directions will: w) attract each other x) repel each other y) cause an electric arc to form z) not affect each other

Description : Two parallel wires carrying currents in opposite directions will: w) attract each other x) repel each other y) cause an electric arc to form z) not affect each other

Last Answer : ANSWER: X -- REPEL EACH OTHER

The greatest induced EMF will occur in a straight wire moving at constant speed through a uniform magnetic field when the angle between the direction of the wire's motion and the direction of the magnetic field is w) 0 degrees x) 30 degrees y) 60 degrees z) 90 degrees

Description : The greatest induced EMF will occur in a straight wire moving at constant speed through a uniform magnetic field when the angle between the direction of the wire's motion and the direction of the magnetic field is w) 0 degrees x) 30 degrees y) 60 degrees z) 90 degrees

Last Answer : ANSWER: Z -- 90 DEGREES

Copper wires are generally used for electrical power transmission instead of iron wire because : (1) copper is cheaper than iron (2) copper is lighter than iron (3) copper is a better conductor of electricity than iron (4) copper can take higher power than iron

Description : Copper wires are generally used for electrical power transmission instead of iron wire because : (1) copper is cheaper than iron (2) copper is lighter than iron (3) copper is a better conductor of electricity than iron (4) copper can take higher power than iron 

Last Answer : copper is a better conductor of electricity than iron

Resistance to heat flow by conduction is proportional to (where, t & ρ are thickness & density of the material respectively and A = area normal tothe direction of heat flow.) (A) t (B) 1/ρ (C) 1/A (D) All (A), (B) & (C)

Description : Resistance to heat flow by conduction is proportional to (where, t & ρ are thickness & density of the material respectively and A = area normal tothe direction of heat flow.) (A) t (B) 1/ρ (C) 1/A (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

A small gap is left at the joints of rails in a railway track to – (1) avoid the tracks being distorted due to seasonal temperature variation (2) avoid the heating of tracks to high temperature (3) control the speed of train (4) keep the rails equidistant

Description : A small gap is left at the joints of rails in a railway track to – (1) avoid the tracks being distorted due to seasonal temperature variation (2) avoid the heating of tracks to high temperature (3) control the speed of train (4) keep the rails equidistant

Last Answer : (1) avoid the tracks being distorted due to seasonal temperature variation Explanation: A small gap is left at the joints of rails in a railway track to provide space for the expansion of rail pieces when the temperature rises during summer.

Magnetic keepers are used to protect magnets from : (1) Earth's magnetic field (2) effect of other magnets (3) self-demagnetization (4) demagnetization due to heating

Description : Magnetic keepers are used to protect magnets from : (1) Earth's magnetic field (2) effect of other magnets (3) self-demagnetization (4) demagnetization due to heating

Last Answer : (3) self-demagnetization Explanation: Magnets have a tendency to lose their magnetism when their poles are left bare. This is called selfdemagnetization. Magnets are, therefore, protected by keeping them in magnetic keepers.

Green house effect is the heating up of the Earth's atmosphere which is due to – (1) the ultraviolet rays (2) y-rays (3) the infra-red rays (4) X-rays

Description : Green house effect is the heating up of the Earth's atmosphere which is due to – (1) the ultraviolet rays (2) y-rays (3) the infra-red rays (4) X-rays

Last Answer : (3) the infra-red rays Explanation: The greenhouse effect refers to circumstances where the short wavelengths of visible light from the sun pass through a transparent medium and are absorbed, ... The trapping of the long wavelength radiation leads to more heating and a higher resultant temperature.

Green house effect is the heating up of the Earth’s atmosphere which is due to (1) the ultraviolet rays (2) g-rays (3) the infra-red rays (4) X-rays

Description : Green house effect is the heating up of the Earth’s atmosphere which is due to (1) the ultraviolet rays (2) g-rays (3) the infra-red rays (4) X-rays

Last Answer : the infra-red rays

Magnetic keepers are used to protect magnets from : (1) Earth’s magnetic field (2) effect of other magnets (3) self-demagnetization (4) demagnetization due to heating

Description : Magnetic keepers are used to protect magnets from : (1) Earth’s magnetic field (2) effect of other magnets (3) self-demagnetization (4) demagnetization due to heating 

Last Answer : self-demagnetization

A small gap is left at the joints of rails in a railway track to (1) avoid the tracks being distorted due to seasonal temperature variation (2) avoid the heating of tracks to high temperature (3) control the speed of train (4) keep the rails equidistant

Description : A small gap is left at the joints of rails in a railway track to (1) avoid the tracks being distorted due to seasonal temperature variation (2) avoid the heating of tracks to high temperature (3) control the speed of train (4) keep the rails equidistant

Last Answer : avoid the tracks being distorted due to seasonal temperature variation

Figure shows, three long straight wires parallel and equally speed with identical currents. Then, the force acting on each wire due to the other is

Description : Figure shows, three long straight wires parallel and equally speed with identical currents. Then, the force acting on each wire due to the other is

Last Answer : Figure shows, three long straight wires parallel and equally speed with identical currents. Then, the force acting on ... `F_(b) gt F_(a) gt F_(c)`

Singing of telephone wires in the wind occurs due to : (a) Vibrations caused by birds as they sit on or get off, the wires (b) Tensioning at the ends (c) Magnus effect (d) Generation of Karman Vortex street

Description : Singing of telephone wires in the wind occurs due to : (a) Vibrations caused by birds as they sit on or get off, the wires (b) Tensioning at the ends (c) Magnus effect (d) Generation of Karman Vortex street

Last Answer : (d) Generation of Karman Vortex street

Due to self-inductance, the coil wires are known as: a. Insulator b. Conductor c. Inductor d. Semi-conductor

Description : Due to self-inductance, the coil wires are known as: a. Insulator b. Conductor c. Inductor d. Semi-conductor

Last Answer : c. Inductor

Clear nights are colder than cloudy nights because of – (1) conduction (2) condensation (3) radiation (4) insolation

Description : Clear nights are colder than cloudy nights because of – (1) conduction (2) condensation (3) radiation (4) insolation

Last Answer : (3) radiation Explanation: Cloudless nights are colder because the nights that have clouds provide a blanket for the earth and trap some of the hot day air where as the cloudless nights ... waves travel through vacuum, or through matter-containing media that are not required for their propagation.

Heat transfer horizontally within the atmosphere is called – (1) Conduction (2) Convection (3) Absorption (4) Advection

Description : Heat transfer horizontally within the atmosphere is called – (1) Conduction (2) Convection (3) Absorption (4) Advection

Last Answer : (4) Advection Explanation: Convection transfers heat vertically into the atmosphere. In order for heat to be transferred to other regions, it must be transferred horizontally by the wind. The horizontal ... advection is the transport of pollutants or silt in a river by bulk water flow downstream.

Heat from the sun reaches earth by the process of – (1) Conduction (2) Convection (3) Radiation (4) All of the above

Description : Heat from the sun reaches earth by the process of – (1) Conduction (2) Convection (3) Radiation (4) All of the above

Last Answer : (3) Radiation Explanation: In physics, radiation is a process in which energetic particles or energetic waves travel through vacuum, or through mattercontaining media that are not required for their propagation.

Suns heat reaches us by – (1) Conduction (2) Convection (3) Radiation (4) Reflection

Description : Suns heat reaches us by – (1) Conduction (2) Convection (3) Radiation (4) Reflection

Last Answer : (3) Radiation Explanation: Radiation is a process in which energetic particles or energetic waves travel through vacuum, or through matter-containing media that are not required for their propagation. The sun' ... frequencies), but those from the sun are mainly infra-red, visible, and ultra-violet.

Heat from the Sun reaches the Earth by (1) Reflection (2) Conduction (3) Radiation (4) Convection

Description : Heat from the Sun reaches the Earth by (1) Reflection (2) Conduction (3) Radiation (4) Convection

Last Answer : (3) Radiation Explanation: The radiation (light, heat, etc.) travels through the intervening 150,000,000 kilometers in 8 minutes. Radiation is a process in which energetic particles or energetic waves ... waves or sound waves, are usually not considered to be forms of "radiation" in this sense.

The atmosphere is heated mainly by – (1) Insulation (2) Conduction (3) Radiation (4) Convection

Description : The atmosphere is heated mainly by – (1) Insulation (2) Conduction (3) Radiation (4) Convection

Last Answer : (3) Radiation Explanation: Changes in weather involve air movements, formation of clouds, and precipitation. Energy is needed to make all these things happen. That energy comes from the sun. Heat energy ... radiation. Hot bodies such as the sun radiate their energy mainly in the form of short waves.

Ocean currents are an example of – (1) convection (2) conduction (3) insulation (4) radiation

Description : Ocean currents are an example of – (1) convection (2) conduction (3) insulation (4) radiation

Last Answer : (1) convection Explanation: Heat is transferred by convection in numerous examples of naturally occurring fluid flow, such as: wind, oceanic currents, and movements within the Earth's atmosphere. ... transfer heat from the surplus to deficit heat zones and set the oceanic circulation in motion.

Number of conduction electrons per unit volume is A. electron number B. number density C. proton number D. neutron numbe

Description : Number of conduction electrons per unit volume is A. electron number B. number density C. proton number D. neutron numbe

Last Answer : number density