With lapse of time, the overhead composition of light component in case of batch distillation with constant reflux (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on system

With lapse of time, the overhead composition of light component in
case of batch distillation with constant reflux
(A) Increases
(B) Decreases
(C) Remain same
(D) May increase or decrease; depends on system
by

1 Answer

Answer :

(B) Decreases
by

Related questions

In batch distillation with constant reflux, overhead product composition __________ with time. (A) Increases (B) Decreases (C) Does not vary (D) May increase on decrease, depends on the system

Description : In batch distillation with constant reflux, overhead product composition __________ with time. (A) Increases (B) Decreases (C) Does not vary (D) May increase on decrease, depends on the system

Last Answer : (B) Decreases

For a fixed number of ideal stages in a distillation column, as the reflux ratio is increased, the difference in composition between the top and bottomproduct streams(A) Increases(B) Decreases(C) Remain unaffected(D) Passes through a maximum

Description : For a fixed number of ideal stages in a distillation column, as the reflux ratio is increased, the difference in composition between the top and bottom product streams (A) Increases (B) Decreases (C) Remain unaffected (D) Passes through a maximum

Last Answer : (A) Increases

In a single evaporator system, the steam economy __________ by creating vacuum in the evaporator. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease, depends on the vacuum

Description : In a single evaporator system, the steam economy __________ by creating vacuum in the evaporator. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease, depends on the vacuum

Last Answer : (A) Increases

Temperature of the product during ultrafine grinding (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material being ground

Description : Temperature of the product during ultrafine grinding (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material being ground

Last Answer : (A) Increases

The filtrate flow rate in constant pressure filtration (A) Continuously increases (B) Continuously decreases (C) Remain constant throughout (D) May increase or decrease; depends on the pressure

Description : The filtrate flow rate in constant pressure filtration (A) Continuously increases (B) Continuously decreases (C) Remain constant throughout (D) May increase or decrease; depends on the pressure

Last Answer : (B) Continuously decreases

The absorptivity of a grey body at a given temperature __________ with increasing wavelength of radiation. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material

Description : The absorptivity of a grey body at a given temperature __________ with increasing wavelength of radiation. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material

Last Answer : (D) May increase or decrease; depends on the material

C.V. (kcal/Nm3 ) of gaseous fuels __________ with increase in molecular weight. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease, depends on combustibles

Description : C.V. (kcal/Nm3 ) of gaseous fuels __________ with increase in molecular weight. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease, depends on combustibles

Last Answer : (D) May increase or decrease, depends on combustibles

With increase in the temperature, viscosity of a liquid (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the liquid

Description : With increase in the temperature, viscosity of a liquid (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the liquid

Last Answer : (B) Decreases

The amount of chemical coagulant added for treatment of polluted water __________ with increase in temperature of the polluted water to be treated. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease; depends on the chemical characteristics of polluted water

Description : The amount of chemical coagulant added for treatment of polluted water __________ with increase in temperature of the polluted water to be treated. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease; depends on the chemical characteristics of polluted water

Last Answer : (A) Decreases

With increase in C/H ratio of a fuel, the dew point of flue gases (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the type of fuel

Description : With increase in C/H ratio of a fuel, the dew point of flue gases (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the type of fuel

Last Answer : (B) Decreases

With increase in the shear rate, the apparent viscosity of pseudo-plastic fluids (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the magnitude of shear rate

Description : With increase in the shear rate, the apparent viscosity of pseudo-plastic fluids (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the magnitude of shear rate

Last Answer : (B) Decreases

After throttling, gas temperature (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease; depends on the nature of

Description : After throttling, gas temperature (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease; depends on the nature of

Last Answer : (A) Decreases

The atmospheric temperature during melting of ice/snow (in the atmosphere) (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease; depends on the altitude where snow melts Answer

Description : The atmospheric temperature during melting of ice/snow (in the atmosphere) (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease; depends on the altitude where snow melts Answer

Last Answer : A) Decreases

With increase in compression ratio, the volumetric efficiency of air compressor (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease (depends on the suction pressure)

Description : With increase in compression ratio, the volumetric efficiency of air compressor (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease (depends on the suction pressure)

Last Answer : Option A

The equilibrium constant of chemical reaction __________ in the presence of catalyst. (A) Increases (B) Decreases (C) Remain unaffected (D) Can either increase or decrease (depends on the type of catalyst)

Description : The equilibrium constant of chemical reaction __________ in the presence of catalyst. (A) Increases (B) Decreases (C) Remain unaffected (D) Can either increase or decrease (depends on the type of catalyst)

Last Answer : (C) Remain unaffected

With increase in temperature, the thermal conductivity of fresh lubricating oil (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on its composition

Description : With increase in temperature, the thermal conductivity of fresh lubricating oil (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on its composition

Last Answer : (B) Decreases

With decrease in the grain size of a material, its creep resistance (A) Increases (B) Decreases (C) Remain constant (D) Either (A) or (B); depends on the material

Description : With decrease in the grain size of a material, its creep resistance (A) Increases (B) Decreases (C) Remain constant (D) Either (A) or (B); depends on the material

Last Answer : (C) Remain constant

In case of a multipass shell and tube heat exchanger, providing a baffle on the shell side __________ the heat transfer rate. (A) Increases (B) Decreases (C) Does not affect (D) May increase or decrease, depends on the type of baffle

Description : In case of a multipass shell and tube heat exchanger, providing a baffle on the shell side __________ the heat transfer rate. (A) Increases (B) Decreases (C) Does not affect (D) May increase or decrease, depends on the type of baffle

Last Answer : (A) Increases

In case of vertical tube evaporator, with increase in liquor level, the overall heat transfer co-efficient (A) Increases (B) Decreases (C) Is not affected (D) May increase or decrease; depends on the feed

Description : In case of vertical tube evaporator, with increase in liquor level, the overall heat transfer co-efficient (A) Increases (B) Decreases (C) Is not affected (D) May increase or decrease; depends on the feed

Last Answer : (B) Decreases

Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio (above the minimum reflux ratio), the fixed cost of the distillation column first increases and then decreases (C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Description : Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio ( ... (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Last Answer : C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux

. In a distillation column, with increase in the reflux ratio, the heat removed in the cooler (A) Increases (B) Decreases (C) Remains unaffected (D) And the heat required in reboiler decreases

Description : . In a distillation column, with increase in the reflux ratio, the heat removed in the cooler (A) Increases (B) Decreases (C) Remains unaffected (D) And the heat required in reboiler decreases

Last Answer : (A) Increases

Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of gases in solvent increases at a fixed temperature (C) Decrease in Murphree plate efficiency is an indication of entrainment in distillation column (D) The capacity of a distillation column is maximum at total reflux

Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux

Last Answer : (D) The capacity of a distillation column is maximum at total reflux

In β-decay of radioactive material, the ratio of neutron to proton (A) Increases (B) Remain same (C) Decreases (D) Is unpredictable; may increase or decrease

Description : In β-decay of radioactive material, the ratio of neutron to proton (A) Increases (B) Remain same (C) Decreases (D) Is unpredictable; may increase or decrease

Last Answer : (C) Decreases

With increase in temperature, the thermal conductivity of a gas (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of gas

Description : With increase in temperature, the thermal conductivity of a gas (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of gas

Last Answer : (A) Increases

As the C/H ratio of the fuel increases, the amount of CO2 formed on combustion __________ for the same percentage of excess air. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease depending on the type of fuel

Description : As the C/H ratio of the fuel increases, the amount of CO2 formed on combustion __________ for the same percentage of excess air. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease depending on the type of fuel

Last Answer : (B) Increases

The boundary layer thickness at a given section along a flat plate __________ with increasing Reynold's number(A) Increases(B) Decreases(C) Remain same(D) May increase or decrease.

Description : The boundary layer thickness at a given section along a flat plate __________ with increasing Reynold's number. (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease

Last Answer : (B) Decreases

As the chemical reaction proceeds, the rate of reaction(A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of reaction

Description : As the chemical reaction proceeds, the rate of reaction (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of reaction

Last Answer : (B) Decreases

Latent heat of dry steam at atmospheric pressure is 539 Kcal/kg; which __________ with increase in the pressure of steam. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease

Description : Latent heat of dry steam at atmospheric pressure is 539 Kcal/kg; which __________ with increase in the pressure of steam. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease

Last Answer : (A) Decreases

With increase in temperature, the electrical conductivity of semiconductors (A) Increases (B) Decreases (C) Remain constant (D) Either (A) or (B), depends on the type of semi-conductor

Description : With increase in temperature, the electrical conductivity of semiconductors (A) Increases (B) Decreases (C) Remain constant (D) Either (A) or (B), depends on the type of semi-conductor

Last Answer : Option A

For a given Reynold number as d/D for an orifice increases, Cd will (where, d & D are orifice & pipe diameters respectively). (A) Increase (B) Decrease (C) Remain constant (D) Either (A) or (B); depends on other factors

Description : For a given Reynold number as d/D for an orifice increases, Cd will (where, d & D are orifice & pipe diameters respectively). (A) Increase (B) Decrease (C) Remain constant (D) Either (A) or (B); depends on other factors

Last Answer : (A) Increase

For the same process conditions, the reflux ratio of an unlagged distillation column (A) Decreases in winter (B) Increases in winter (C) Increases in summer (D) None of these

Description : For the same process conditions, the reflux ratio of an unlagged distillation column (A) Decreases in winter (B) Increases in winter (C) Increases in summer (D) None of these

Last Answer : (B) Increases in winter

For a stable phase at constant pressure and temperature, the fugacity of each component in a binary system __________ as its mole fraction increases. (A) Decreases (B) Increases (C) Remain same (D) Decreases linearly

Description : For a stable phase at constant pressure and temperature, the fugacity of each component in a binary system __________ as its mole fraction increases. (A) Decreases (B) Increases (C) Remain same (D) Decreases linearly

Last Answer : (B) Increases

The feed to fractionating column is changed from saturated vapour to saturated liquid. If the separation and reflux ratio remains unchanged, the number of ideal stages will (A) Increase (B) Decrease (C) Remain same (D) Depend on saturated boiling point; may increase or decrease

Description : The feed to fractionating column is changed from saturated vapour to saturated liquid. If the separation and reflux ratio remains unchanged, the number of ideal stages will (A) Increase (B) Decrease (C) Remain same (D) Depend on saturated boiling point; may increase or decrease

Last Answer : (A) Increase

With increase in the order of reaction (for all positive reaction orders), the ratio of the volume of mixed reactor to the volume of plug flow reactor (for identical feed composition, flow rate and conversion). (A) Increases (B) Decreases (C) Remain same (D) Increases linearly

Description : With increase in the order of reaction (for all positive reaction orders), the ratio of the volume of mixed reactor to the volume of plug flow reactor (for identical feed composition, flow rate and conversion). (A) Increases (B) Decreases (C) Remain same (D) Increases linearly

Last Answer : (A) Increases

In a boundary layer developed along the flow, the pressure decreases in the downstream direction. The boundary layer thickness in this case will (A) Decrease gradually (B) Increase gradually (C) Increase rapidly (D) Remain constant

Description : In a boundary layer developed along the flow, the pressure decreases in the downstream direction. The boundary layer thickness in this case will (A) Decrease gradually (B) Increase gradually (C) Increase rapidly (D) Remain constant

Last Answer : (B) Increase gradually

As the reflux ratio in a distillation column is increased from the minimum, the (A) Slope of the operating line in stripping section decreases (B) Number of plates decreases very slowly first and then more and more rapidly (C) Total cost first decreases and then increases (D) Liquid flow increases while the vapor flow decreases for a system

Description : As the reflux ratio in a distillation column is increased from the minimum, the (A) Slope of the operating line in stripping section decreases (B) Number of plates decreases very slowly first ... decreases and then increases (D) Liquid flow increases while the vapor flow decreases for a system

Last Answer : (C) Total cost first decreases and then increases

With increase in temperature, the rate constant obeying Arrhenius equation (A) Increases (B) Decreases (C) Decreases exponentially (D) Can either increase or decrease; depends on the frequency factor

Description : With increase in temperature, the rate constant obeying Arrhenius equation (A) Increases (B) Decreases (C) Decreases exponentially (D) Can either increase or decrease; depends on the frequency factor

Last Answer : (C) Decreases exponentially

. With increase in temperature, the electrical conductivity of semiconductors (A) Increases (B) Decreases (C) Remain constant (D) Either (A) or (B), depends on the type of semi-conductor

Description : . With increase in temperature, the electrical conductivity of semiconductors (A) Increases (B) Decreases (C) Remain constant (D) Either (A) or (B), depends on the type of semi-conductor

Last Answer : Option A

With increase in temperature, the solubility of gases in liquids, at fixed pressure (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B), depends on the system

Description : With increase in temperature, the solubility of gases in liquids, at fixed pressure (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B), depends on the system

Last Answer : (B) Decreases

The boiling points of pure components of a binary system __________ with increase in total pressure of the system. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease, depends on the system

Description : The boiling points of pure components of a binary system __________ with increase in total pressure of the system. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease, depends on the system

Last Answer : (B) Increases

At constant temperature, the thermal conductivities of gases__________ with rise in pressure.(A) Decrease(B) Increase(C) Remain unchanged(D) May increase or decrease; depends on the pressure

Description : At constant temperature, the thermal conductivities of gases__________ with rise in pressure. (A) Decrease (B) Increase (C) Remain unchanged (D) May increase or decrease; depends on the pressure

Last Answer : (A) Decrease

With increase in the ratio of orifice diameter to pipe diameter in case of an orificemeter, the overall pressure loss (A) Decreases (B) Increases (C) Remain constant (D) Increases linearly

Description : With increase in the ratio of orifice diameter to pipe diameter in case of an orificemeter, the overall pressure loss (A) Decreases (B) Increases (C) Remain constant (D) Increases linearly

Last Answer : (C) Remain constant

The reflux to a distillation column is 100 moles/hr, when the overhead product rate is 50 moles/hr. The reflux ratio is (A) 2 (B) 0.5 (C) 50 (D) 150

Description : The reflux to a distillation column is 100 moles/hr, when the overhead product rate is 50 moles/hr. The reflux ratio is (A) 2 (B) 0.5 (C) 50 (D) 150

Last Answer : (A) 2

If the spring mass system with m and spring stiffness k is taken to very high altitude, the natural frequency of longitudinal vibrations * 1 point (A) increases (B) decreases (C) remain unchanged (D) may increase or decrease depending upon the value of the mass

Description : If the spring mass system with m and spring stiffness k is taken to very high altitude, the natural frequency of longitudinal vibrations * 1 point (A) increases (B) decreases (C) remain unchanged (D) may increase or decrease depending upon the value of the mass

Last Answer : (C) remain unchanged

If the spring mass system with m and spring stiffness k is taken to very high altitude , the natural frequency of longitudinal vibrations A) Increases B) Decreases C) Remain unchanged D) May be increase or decrease depending upon the value of the mass

Description : If the spring mass system with m and spring stiffness k is taken to very high altitude , the natural frequency of longitudinal vibrations A) Increases B) Decreases C) Remain unchanged D) May be increase or decrease depending upon the value of the mass

Last Answer : C) Remain unchanged

For the flow of gases through a capillary, with increase in temperature, the permeability __________ as per Knudsen law. (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B); depends on the gas

Description : For the flow of gases through a capillary, with increase in temperature, the permeability __________ as per Knudsen law. (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B); depends on the gas

Last Answer : (A) Increases

With increase in C/H ratio of a fuel, the amount of CO2 formed on its complete combustion (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B), depends on other factors

Description : With increase in C/H ratio of a fuel, the amount of CO2 formed on its complete combustion (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B), depends on other factors

Last Answer : (A) Increases

Production rate __________ with increased fineness, with a given energy input to the size reduction machine. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the machine

Description : Production rate __________ with increased fineness, with a given energy input to the size reduction machine. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the machine

Last Answer : (A) Decreases

With increase in the concentration of the adsorbate, the integral heat of adsorption (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the type of adsorbate

Description : With increase in the concentration of the adsorbate, the integral heat of adsorption (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the type of adsorbate

Last Answer : (B) Decreases

Thermal conductivities of most of the liquids __________ with rise in temperature.(A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the liquid

Description : Thermal conductivities of most of the liquids __________ with rise in temperature. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the liquid

Last Answer : (B) Decreases