With increase in C/H ratio of a fuel, the dew point of flue gases (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the type of fuel

With increase in C/H ratio of a fuel, the dew point of flue gases
(A) Increases
(B) Decreases
(C) Remain same
(D) May increase or decrease; depends on the type of fuel
by

1 Answer

Answer :

(B) Decreases
by

Related questions

As the C/H ratio of the fuel increases, the amount of CO2 formed on combustion __________ for the same percentage of excess air. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease depending on the type of fuel

Description : As the C/H ratio of the fuel increases, the amount of CO2 formed on combustion __________ for the same percentage of excess air. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease depending on the type of fuel

Last Answer : (B) Increases

High sulphur content in a fuel __________ of the flue gases. (A) Decreases the dew point (B) Increases the dew point (C) Reduces the combustion efficiency by limiting the permissible temperature reduction (D) Both (B) and (C)

Description : High sulphur content in a fuel __________ of the flue gases. (A) Decreases the dew point (B) Increases the dew point (C) Reduces the combustion efficiency by limiting the permissible temperature reduction (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

With increase in C/H ratio of a fuel, the amount of CO2 formed on its complete combustion (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B), depends on other factors

Description : With increase in C/H ratio of a fuel, the amount of CO2 formed on its complete combustion (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B), depends on other factors

Last Answer : (A) Increases

With increase in compression ratio, the volumetric efficiency of air compressor (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease (depends on the suction pressure)

Description : With increase in compression ratio, the volumetric efficiency of air compressor (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease (depends on the suction pressure)

Last Answer : Option A

With lapse of time, the overhead composition of light component in case of batch distillation with constant reflux (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on system

Description : With lapse of time, the overhead composition of light component in case of batch distillation with constant reflux (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on system

Last Answer : (B) Decreases

With increase in the shear rate, the apparent viscosity of pseudo-plastic fluids (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the magnitude of shear rate

Description : With increase in the shear rate, the apparent viscosity of pseudo-plastic fluids (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the magnitude of shear rate

Last Answer : (B) Decreases

After throttling, gas temperature (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease; depends on the nature of

Description : After throttling, gas temperature (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease; depends on the nature of

Last Answer : (A) Decreases

The atmospheric temperature during melting of ice/snow (in the atmosphere) (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease; depends on the altitude where snow melts Answer

Description : The atmospheric temperature during melting of ice/snow (in the atmosphere) (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease; depends on the altitude where snow melts Answer

Last Answer : A) Decreases

Air at a particular humidity is heated in a furnace. The new dew point (A) Decreases (B) Increases (C) Depends on the extent of heating (D) Remain unchanged

Description : Air at a particular humidity is heated in a furnace. The new dew point (A) Decreases (B) Increases (C) Depends on the extent of heating (D) Remain unchanged

Last Answer : (B) Increases

Incomplete combustion of fuel in the furnace is judged by high __________ of the flue gases. (A) CO content (B) Dew point (C) CO2 content (D) O2 content

Description : Incomplete combustion of fuel in the furnace is judged by high __________ of the flue gases. (A) CO content (B) Dew point (C) CO2 content (D) O2 content

Last Answer : (A) CO content

Temperature of the product during ultrafine grinding (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material being ground

Description : Temperature of the product during ultrafine grinding (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material being ground

Last Answer : (A) Increases

The filtrate flow rate in constant pressure filtration (A) Continuously increases (B) Continuously decreases (C) Remain constant throughout (D) May increase or decrease; depends on the pressure

Description : The filtrate flow rate in constant pressure filtration (A) Continuously increases (B) Continuously decreases (C) Remain constant throughout (D) May increase or decrease; depends on the pressure

Last Answer : (B) Continuously decreases

The absorptivity of a grey body at a given temperature __________ with increasing wavelength of radiation. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material

Description : The absorptivity of a grey body at a given temperature __________ with increasing wavelength of radiation. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material

Last Answer : (D) May increase or decrease; depends on the material

In a single evaporator system, the steam economy __________ by creating vacuum in the evaporator. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease, depends on the vacuum

Description : In a single evaporator system, the steam economy __________ by creating vacuum in the evaporator. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease, depends on the vacuum

Last Answer : (A) Increases

C.V. (kcal/Nm3 ) of gaseous fuels __________ with increase in molecular weight. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease, depends on combustibles

Description : C.V. (kcal/Nm3 ) of gaseous fuels __________ with increase in molecular weight. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease, depends on combustibles

Last Answer : (D) May increase or decrease, depends on combustibles

With increase in the temperature, viscosity of a liquid (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the liquid

Description : With increase in the temperature, viscosity of a liquid (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the liquid

Last Answer : (B) Decreases

The amount of chemical coagulant added for treatment of polluted water __________ with increase in temperature of the polluted water to be treated. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease; depends on the chemical characteristics of polluted water

Description : The amount of chemical coagulant added for treatment of polluted water __________ with increase in temperature of the polluted water to be treated. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease; depends on the chemical characteristics of polluted water

Last Answer : (A) Decreases

At constant pressure, with increase of temperature, the dew point will (A) Increase (B) Decrease (C) Remain unchanged (D) Increase/decrease; depends on the temperature

Description : At constant pressure, with increase of temperature, the dew point will (A) Increase (B) Decrease (C) Remain unchanged (D) Increase/decrease; depends on the temperature

Last Answer : (A) Increase

With increase in temperature, the solubility of gases in liquids, at fixed pressure (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B), depends on the system

Description : With increase in temperature, the solubility of gases in liquids, at fixed pressure (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B), depends on the system

Last Answer : (B) Decreases

For the flow of gases through a capillary, with increase in temperature, the permeability __________ as per Knudsen law. (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B); depends on the gas

Description : For the flow of gases through a capillary, with increase in temperature, the permeability __________ as per Knudsen law. (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B); depends on the gas

Last Answer : (A) Increases

In β-decay of radioactive material, the ratio of neutron to proton (A) Increases (B) Remain same (C) Decreases (D) Is unpredictable; may increase or decrease

Description : In β-decay of radioactive material, the ratio of neutron to proton (A) Increases (B) Remain same (C) Decreases (D) Is unpredictable; may increase or decrease

Last Answer : (C) Decreases

The equilibrium constant of chemical reaction __________ in the presence of catalyst. (A) Increases (B) Decreases (C) Remain unaffected (D) Can either increase or decrease (depends on the type of catalyst)

Description : The equilibrium constant of chemical reaction __________ in the presence of catalyst. (A) Increases (B) Decreases (C) Remain unaffected (D) Can either increase or decrease (depends on the type of catalyst)

Last Answer : (C) Remain unaffected

Limestone powder is injected during pulverised coal burning in boilers to __________ the flue gases. (A) Reduce SO2 content in (B) Catalytically convert SO2 to SO3 in (C) Increase the dew point of (D) None of these

Description : Limestone powder is injected during pulverised coal burning in boilers to __________ the flue gases. (A) Reduce SO2 content in (B) Catalytically convert SO2 to SO3 in (C) Increase the dew point of (D) None of these

Last Answer : (A) Reduce SO2 content in

Dew point of a gas-vapour mixture (A) Increases with temperature rise (B) Decreases with temperature rise (C) Decreases with decrease in pressure (D) Increases with increase in pressure

Description : Dew point of a gas-vapour mixture (A) Increases with temperature rise (B) Decreases with temperature rise (C) Decreases with decrease in pressure (D) Increases with increase in pressure

Last Answer : (C) Decreases with decrease in pressure

With increase in temperature, the thermal conductivity of a gas (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of gas

Description : With increase in temperature, the thermal conductivity of a gas (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of gas

Last Answer : (A) Increases

As the chemical reaction proceeds, the rate of reaction(A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of reaction

Description : As the chemical reaction proceeds, the rate of reaction (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of reaction

Last Answer : (B) Decreases

Acid dew point temperature (ADT) of a flue gas produced by the combustion of a fuel containing 1% sulphur may be about __________ °C. (A) 80 (B) 130 (C) 180 (D) 250

Description : Acid dew point temperature (ADT) of a flue gas produced by the combustion of a fuel containing 1% sulphur may be about __________ °C. (A) 80 (B) 130 (C) 180 (D) 250

Last Answer : (B) 130

The boundary layer thickness at a given section along a flat plate __________ with increasing Reynold's number(A) Increases(B) Decreases(C) Remain same(D) May increase or decrease.

Description : The boundary layer thickness at a given section along a flat plate __________ with increasing Reynold's number. (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease

Last Answer : (B) Decreases

Latent heat of dry steam at atmospheric pressure is 539 Kcal/kg; which __________ with increase in the pressure of steam. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease

Description : Latent heat of dry steam at atmospheric pressure is 539 Kcal/kg; which __________ with increase in the pressure of steam. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease

Last Answer : (A) Decreases

If we increase the pressure on a substance (which is at its triple point), then the triple point (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Description : If we increase the pressure on a substance (which is at its triple point), then the triple point (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Last Answer : (C) Remains unchanged

If the spring mass system with m and spring stiffness k is taken to very high altitude, the natural frequency of longitudinal vibrations * 1 point (A) increases (B) decreases (C) remain unchanged (D) may increase or decrease depending upon the value of the mass

Description : If the spring mass system with m and spring stiffness k is taken to very high altitude, the natural frequency of longitudinal vibrations * 1 point (A) increases (B) decreases (C) remain unchanged (D) may increase or decrease depending upon the value of the mass

Last Answer : (C) remain unchanged

Which of the following is not an additive for flue gases from furnace to reduce its dew-point? (A) Ammonia (B) Fine dolomite (C) Alkaline powders (D) None of these

Description : Which of the following is not an additive for flue gases from furnace to reduce its dew-point? (A) Ammonia (B) Fine dolomite (C) Alkaline powders (D) None of these

Last Answer : (D) None of these

In the speed of rotation of earth decreases, the weight of the body will a.Decrease b.Remain unaltered c.Depends on speed ratio d.Cannot be ascertained on the basis the information given e.Increase

Description : In the speed of rotation of earth decreases, the weight of the body will a.Decrease b.Remain unaltered c.Depends on speed ratio d.Cannot be ascertained on the basis the information given e.Increase

Last Answer : c. Depends on speed ratio

With increase in the concentration of the adsorbate, the integral heat of adsorption (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the type of adsorbate

Description : With increase in the concentration of the adsorbate, the integral heat of adsorption (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the type of adsorbate

Last Answer : (B) Decreases

In case of a multipass shell and tube heat exchanger, providing a baffle on the shell side __________ the heat transfer rate. (A) Increases (B) Decreases (C) Does not affect (D) May increase or decrease, depends on the type of baffle

Description : In case of a multipass shell and tube heat exchanger, providing a baffle on the shell side __________ the heat transfer rate. (A) Increases (B) Decreases (C) Does not affect (D) May increase or decrease, depends on the type of baffle

Last Answer : (A) Increases

Pitch creosote mixture (PCM) as compared to furnace oil is a better fuel, because its (A) Emissivity factor is higher (B) Sulphur content is lower (C) Flue gas has lower dew point thereby facilitating more waste heat recovery (D) All (A), (B) and (C)

Description : Pitch creosote mixture (PCM) as compared to furnace oil is a better fuel, because its (A) Emissivity factor is higher (B) Sulphur content is lower (C) Flue gas has lower dew point thereby facilitating more waste heat recovery (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

With decrease in the grain size of a material, its creep resistance (A) Increases (B) Decreases (C) Remain constant (D) Either (A) or (B); depends on the material

Description : With decrease in the grain size of a material, its creep resistance (A) Increases (B) Decreases (C) Remain constant (D) Either (A) or (B); depends on the material

Last Answer : (C) Remain constant

Production rate __________ with increased fineness, with a given energy input to the size reduction machine. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the machine

Description : Production rate __________ with increased fineness, with a given energy input to the size reduction machine. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the machine

Last Answer : (A) Decreases

In batch distillation with constant reflux, overhead product composition __________ with time. (A) Increases (B) Decreases (C) Does not vary (D) May increase on decrease, depends on the system

Description : In batch distillation with constant reflux, overhead product composition __________ with time. (A) Increases (B) Decreases (C) Does not vary (D) May increase on decrease, depends on the system

Last Answer : (B) Decreases

The boiling points of pure components of a binary system __________ with increase in total pressure of the system. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease, depends on the system

Description : The boiling points of pure components of a binary system __________ with increase in total pressure of the system. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease, depends on the system

Last Answer : (B) Increases

Thermal conductivities of most of the liquids __________ with rise in temperature.(A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the liquid

Description : Thermal conductivities of most of the liquids __________ with rise in temperature. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the liquid

Last Answer : (B) Decreases

With increase in porosity, the thermal conductivity of a solid substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the solid

Description : With increase in porosity, the thermal conductivity of a solid substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the solid

Last Answer : (B) Decreases

In case of vertical tube evaporator, with increase in liquor level, the overall heat transfer co-efficient (A) Increases (B) Decreases (C) Is not affected (D) May increase or decrease; depends on the feed

Description : In case of vertical tube evaporator, with increase in liquor level, the overall heat transfer co-efficient (A) Increases (B) Decreases (C) Is not affected (D) May increase or decrease; depends on the feed

Last Answer : (B) Decreases

With increase in temperature, the thermal conductivity of fresh lubricating oil (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on its composition

Description : With increase in temperature, the thermal conductivity of fresh lubricating oil (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on its composition

Last Answer : (B) Decreases

Thermal conductivity of a gas at low density, __________ with increase in temperature. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Description : Thermal conductivity of a gas at low density, __________ with increase in temperature. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Last Answer : (B) Increases

With increase in temperature, the internal energy of a substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Description : With increase in temperature, the internal energy of a substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Last Answer : (A) Increases

With increase in temperature, the internal energy of a substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Description : With increase in temperature, the internal energy of a substance (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Last Answer : (A) Increases

At a given temperature, the volume of a gas dissolved in a solvent __________ with increase in pressure. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Description : At a given temperature, the volume of a gas dissolved in a solvent __________ with increase in pressure. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Last Answer : C) Remains unchanged

If the spring mass system with m and spring stiffness k is taken to very high altitude , the natural frequency of longitudinal vibrations A) Increases B) Decreases C) Remain unchanged D) May be increase or decrease depending upon the value of the mass

Description : If the spring mass system with m and spring stiffness k is taken to very high altitude , the natural frequency of longitudinal vibrations A) Increases B) Decreases C) Remain unchanged D) May be increase or decrease depending upon the value of the mass

Last Answer : C) Remain unchanged

With increase in temperature, the electrical conductivity of semiconductors (A) Increases (B) Decreases (C) Remain constant (D) Either (A) or (B), depends on the type of semi-conductor

Description : With increase in temperature, the electrical conductivity of semiconductors (A) Increases (B) Decreases (C) Remain constant (D) Either (A) or (B), depends on the type of semi-conductor

Last Answer : Option A